Tonnellerie Rousseau

Condition: new, functionality: fully functional, - Dimensions • Length: 3.4 metres (11’ 1’’) • Width: 2 metres (6’ 6.75’’) • Height: 2.4 metres (7’ 10.5’’) - Operating weight: 6,740 kg - Engine: Cummins B4.5 T4F/STG V, 115 kW (155 HP) Bledjy Iwd Aopfx Akxog - Transmission: Hydrostatic drive - Fuel tank: 160 litres (42 gallons)

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, MACHINE DATA Blodpfoy Iwdvjx Akxog Year of manufacture: 2025 Operating hours:

Condition: used, Year of construction: 2015, operating hours: 9,800 h, functionality: fully functional, EQUIPMENT DETAILS: Model: DW3060 Rotor: 21 teeth/bolted hammers ENGINE: MTU (Mercedes Benz) 450 HP Bedpoy Iwc Ssfx Akxelg Chassis: 3 axles with tandem wheels Hydraulic front support Remote control Auto-feed Rubber discharge belt Year of manufacture: 2015 Operating hours: 9800 h Registration number: 67.04.152-1

Condition: used, Year of construction: 2023, operating hours: 2,650 h, functionality: fully functional, BRAND: ALBACH MODEL: Diamant 2000 YEAR: 2023 HOURS: 2650 1550 rotor REGISTRATION NO.: 100.23.XX-1 MAN engine 790 HP Bodpfx Akoy Iwcrjxolg

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, Forestry shredder MORBARK WH3000XP is offered for sale, manufactured in 2022, in good condition with approximately 420 total operating hours. The machine is located in Valencia (Spain) and belongs to the forestry equipment category, making it ideal for shredding wood, plant residues, biomass, and other demanding forestry materials. The MORBARK WH3000XP is renowned for its high power, industrial reliability, and operational efficiency, specifically designed to withstand intensive loads in professional environments. Its hammer system ensures uniform, high-quality shredding, adapting to continuous operation with minimal maintenance required. Blodpfx Aoy Iwcfokxeg

Condition: used, Year of construction: 2022, operating hours: 26 h, functionality: fully functional, machine/vehicle number: 193-1036, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Bjdpfxsy Iwb Uo Akxjlg

Condition: good (used), Year of construction: 1993, operating hours: 1,400 h, Slow-speed shredder with moving floor. 18.5 kW motor. 20 knives on the rotor. Only 1,400 operating hours. Sieve perforation can be selected between 25 and 30 mm. Partially overhauled: new rotor bearings, new motor. Blsdpfjy Im D Eex Akxog

Condition: good (used), Code: 0369 Brand: ISVE Model: 25/66 Rotary blade grinder for wood scraps, plastics, packaging, nut shells, fruit stones and pits, leather scraps, wood bark, loppings of trees, and other materials Motor Hp 7,5 (Kw 5,5) Inlet opening diameter mm 250 x 660 Bledpfsy Hqn Sox Akxog It can be connected to a dust collector using a tube placed under the screen Overall dimensions: mm 930 x 770 x 1800 h Weight kg 680

Condition: like new (used), Year of construction: 2024, operating hours: 173 h, functionality: fully functional, first registration: 03/2025, NEW, fully equipped TEKNAMOTOR Skorpion 650 EB/2 wood chipper with 132 kW electric motor, 100x100 mm screen basket, 600 mm elevation for the chipper, electric control box, 8 m vibrating feeding conveyor, 4x3 m vibrating feeding table, 4.5 m collecting conveyor, 8 m discharge conveyor, spare cutting knives. FOR SALE DUE TO LACK OF USE, WITH ALL ACCESSORIES Bjdpfxsy Hcggs Akxolg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 75 kW (101.97 HP), COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – Year of manufacture 2011 For sale is a complete waste wood disposal plant by Rudnick & Enners, built in 2011. The line consists of 20 components and was used for the automatic removal, sorting, and processing of edgings, wood chips, and residual wood in a sawmill. The system has a modular design, is dismantled, in very good condition, and available immediately. Technical Overview – Positions 1 to 20 01 – Crooked chain conveyor from reducer, W 600 mm 02 – Vibrating chute 1-edging line, L 13.0 m, W 650 mm 03 – Vibrating chute 2-edging line, L 15.0 m, W 650 mm 04 – Vibrating chute frame saw line, L 8.50 m, W 500 mm Bsdpfxoy Hbwwe Akxolg 05 – Vibrating chute 1-frame saw line, L 10.0 m, W 500 mm 06 – Vibrating chute 2-frame saw line, L 9.0 m, W 500 mm 07 – Vibrating chute frame saw roller conveyor, L 7.50 m, W 500 mm 08 – Vibrating chute trimming line, L 11.0 m, W 650 mm 09 – Vibrating chute trimming line, L 9.0 m, W 650 mm 10 – Screw conveyor for sawdust, L 4.0 m, Dia. 300 mm 11 – Conveyor belt to chipper, L 3.60 m, W 500 mm 12 – Slab conveyor belt, L 11.0 m, W 300 mm 13 – Waste conveyor belt, L 11.60 m, W 300 mm 14 – Metal detector 15 – Chipper type RE-TH 250/700/5, Motor 75 kW 16 – Double screw under chipper, W 600 mm 17 – Crooked chain conveyor to screen, W 600 mm 18 – R&E screen, L 4.0 m, W 2.0 m 19 – Crooked chain conveyor to landfill, W 500 mm / W 300 mm 20 – Crooked chain conveyor to wood chip storage, W 600 mm Additional Information Manufacturer: Rudnick & Enners Year of manufacture: 2011 Condition: very good, used and dismantled Availability: immediately ex stock Location: A-3525 Lugendorf, Austria Application: Sawmills, biomass plants, wood processing

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Bjdpfxoy E Nkco Akxelg Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7972 TECHNICAL DATA - Inlet width: 300mm - Inlet height: 100mm - Shaft width: 330mm - Knife length: 330mm - Number of knives: 2 pcs - Screen dimensions: 30x30mm - Lower toothed feed shaft - Lower shaft motor: 1.5kW - Upper toothed feed shaft - Upper shaft motor: 1.5kW - Vibrating chute - Vibrating chute length: 1960mm - Vibrating chute width: 300mm - Vibrating chute motor approx. 0.75kW - Main motor: 22kW - Auto-reverse (adjustable) - Extraction nozzle diameter: 200mm - Overall machine dimensions (L/W/H): 1550x1050x840mm - Overall vibrating chute dimensions (L/W/H): 1960x490x570mm - Weight: 1150kg ADVANTAGES – German-made – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – DTR documentation – Used chipper, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations) Blsdpfjy E Iwzjx Akxog

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Bedpfoy E Iv Dex Akxjlg Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: excellent (used), Year of construction: 2018, Catalogue number 7974 TECHNICAL DATA - Infeed opening of widened hopper: 1500x1730mm - Discharge outlet for shredded wood: 200mm diameter - Rotor working width: 990mm - Main motor: 22kW - Pump motor: 0.75kW - Number of knives: 54 pcs - Knife dimensions: 40x40mm - Screen: 20mm - Hydraulic feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x2200x2350mm - Weight: approx. 2000kg Bjdpfey E Itvex Akxelg ADVANTAGES – German made - Pulse feed pusher - Halfway pusher - Fast/forward pusher – automatic feed drawer speed adjustment – Original DTR documentation + CE, year 2018 – Hydraulic feed drawer – Auger – screw conveyor for chip transport – Auto-reverse – Used chipper, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2004, functionality: fully functional, Vecoplan VAZ 800 XL Shredder | 22 kW | Year 2004 | Good Condition | incl. Spare Blades For sale is a used, fully operational single-shaft shredder from Vecoplan, model VAZ 800 XL. The machine is ready for immediate use and can be inspected and tested on site at any time. ⚙️ Technical Specifications Manufacturer: Vecoplan Model: VAZ 800 XL Year of manufacture: 2004 Drive power: 22 kW Feed opening: approx. 1135 x 800 mm Rotor diameter: approx. 370 mm Connection: 400 V / 50 Hz Serial number: 9292010 ✅ Features & Highlights ✔️ Automatic material level control (starts only when sufficient material is available) ✔️ Replaceable knife system Knives can be rotated 3 times Current knife sets still have usable lifespan ✔️ New counter-knife included ✔️ Robust industrial build (Vecoplan standard) ✔️ Maintenance-friendly design ✔️ Well-suited for continuous operation 🪵 Applications Ideally suited for: - Wood waste / solid wood - Chipboard / MDF - Production waste - Plastics (depending on configuration) 🛠️ Condition Technical: Excellent / fully functional Visual: Used, normal signs of use Machine was last running in operation without issues 📍 Inspection & Collection Location: 36367 Wartenberg Inspection under power possible Assistance with loading can be provided The machine is offered as a used unit. Sale is made under exclusion of any liability for material defects. The machine will be sold as inspected and under exclusion of any warranty. The seller assumes no guarantee for functionality, performance, or suitability for a specific purpose. Disclaimer Blsdpfx Ajy Exchekxog Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, limb, or health, or in cases of intentional or grossly negligent behavior by the seller. Dismantling and Transport Dismantling is the buyer's responsibility and at their own risk and expense. The buyer is responsible for all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Risk transfers to the buyer at the latest upon the start of dismantling or loading. Other Information No liability is accepted for hidden defects. All details regarding the machine (e.g., year of manufacture, operating hours, technical details) are provided to the best of our knowledge, but without guarantee.

Condition: like new (used), total engine power 2x22KW feed hopper pressure drawer 6039 operating hours Bodoy Edq Depfx Akxelg shaft length 140 cm auger extractor external dimensions 300x160 cm year 2007

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Bledpfxsy D I I Re Akxjg Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Bledpfxoy D E U Ij Akxog Storage location: Supplier

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Bedpfjy D E Tdjx Akxolg

Condition: good (used), Year of construction: 1995, Slow-speed machine with moving floor, 60 cm rotor width, 18.5 kW motor, fitted with new rotor bearings. Blodpfx Akoy D Alkjxog

Condition: excellent (used), Year of construction: 2004, power: 300 kW (407.89 HP), Wood Chipping Plant BRUKS BK-RH485 – Year of Manufacture 2004 For sale is a high-performance wood chipping plant, BRUKS BK-RH485, ideal for industrial wood chip production. The system is in good working condition and has been regularly serviced. Technical Data Model: BRUKS BK-RH485 Max. Log Diameter: 485 mm Min. Infeed Length: 1,500 mm Max. Infeed Length: 5,500 mm Rotor Disk Drive Power: 315 kW Chip Length: approx. 25 mm Capacity: 80–100 m³/h Operating Hours: approx. 12,500 Year of Manufacture / Commissioning: 2004 System No.: H4224653 Features & Components Blsdpfx Akoy Dr D Njxjg - Step Separator (Feeding step separator) - Feed Belt - Metal Separator / Metal Detector - 2x Discharge Screws (BRUKS): - 600 × 6,500 mm - 800 × 9,500 mm - Control Cabinet / Control Units Description The BRUKS BK-RH485 is designed for high throughput and heavy-duty industrial applications. Thanks to its robust construction and powerful drive system, it is ideally suited for the production of homogeneous wood chips. Integrated metal separation and reliable feed technology ensure safe and efficient operation.

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Bsdpjy Drkvefx Akxjlg Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NO. 6631 TECHNICAL DATA - Loading hopper opening: 285x305mm - Motor: 7.35 kW - Number of knives: 3 pcs + 2 counter knives - Knife size: 300x75mm - Screen (2 types): 10mm, 8mm - Extraction nozzle diameter: 100mm - Dimensions (L/W/H): 1070x900x1980mm - Weight: 613kg Blodpfx Ajy Drh Iokxog ADVANTAGES – Swedish production – Additional screen included – Very good condition – Used chipper Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW - upper toothed feed roller - upper roller motor 2.2kW - belt feeder - feeder belt length 2200mm - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg Blodpfx Akey Dqv Rjxog ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm Blsdpfx Aoy Dqtpekxog - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)