Hilgert Ag

Condition: good (used), Year of construction: 2004, functionality: fully functional, PEDDINGHAUS TDK 1000/9 DRILLING MACHINE 9 SPINDLES MAXIMUM PROFILE 1000 X 420mm MEBA 1020 DGP SAWING MACHINE cutting diameter: 510 mm capacity 90 degrees: round: 510 mm capacity 90 degrees: flat: 1020 x 510 mm capacity 60 degrees: round: 500 (400) mm Hsdpfezc I Iyjx Aqqsp capacity 60 degrees: flat: 500 (400) x 510 mm capacity 45 degrees: round: 510 mm capacity 45 degrees: flat: 750 (670) x 510 mm

Year of construction: 1953, condition: good (used), functionality: fully functional, machine/vehicle number: 46, Condition & Origin: We are offering a former toolmaking machine – a SIP Hydropik H-6 gauge drilling machine in excellent condition. The machine has been used very little and has been out of operation for approximately 2 years. It is immediately available for use in precision manufacturing, mold making, or repair work. Equipment & Features: Rotoptic rotary table (original, including transport crate) – for highly accurate swiveling and indexing operations All original documents (operating manual, wiring diagrams, test reports, etc.) are available Guide rails in very good condition – no discernible wear due to low operating time Machine from a controlled toolmaking environment, not mass production Hedpfxjzb A Tue Aqqjp Technical specifications (briefly): Type: SIP Hydropik H-6 Year of manufacture: 1953 Total weight approx. 10 tons including rotary table Organization & Loading: The machine must be loaded on-site – we do not have our own forklift of suitable size. If desired, we can arrange for an external forklift for a flat-rate fee. If the machine is picked up by the buyer, the loading must be carried out by the buyer themselves. Inspection: Possible at any time by arrangement. The machine can be inspected and demonstrated while powered.

Year of construction: 1986, condition: excellent (used), functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Hjdpfx Aqezabqveqsp Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, Year of construction: 1977, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,000 mm, spindle diameter: 160 mm, spindle speed (min.): 2 rpm, spindle speed (max.): 560 rpm, table length: 1,800 mm, table width: 2,000 mm, Manufactured by Union WMW (Germany) Year of manufacture 1977 Spindle diameter, mm 160 Face plate diameter, mm 950 Spindle speed range, rpm 2.8 – 560 Hsdpsy Uw Afefx Aqqep X Axis Travel, mm 3600 Y Axis Travel, mm 3000 Z Axis Spindle Travel, mm 1000 W Axis Longitudinal Column Travel, mm 500 Rotary table size, mm 2000 x 1800 Rotary table longitudinal movement, mm 1250 Spindle motor, kW 22 Floor plate size, mm 3500 x 2000 (2 units) UNION BFP 160 is a heavy-duty floor type horizontal boring and milling machine manufactured by UNION Gera, Germany. Equipped with a 160 mm spindle, the machine is designed for precision machining of large and heavy workpieces in metalworking, energy, mining, and heavy industry applications. The borer is under power, fully complete and equipped with some tools.

Year of construction: 2018, condition: ready for operation (used), A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement. Hedpoy Tn Ntjfx Aqqep

Year of construction: 1980, condition: ready for operation (used), A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible. Hodpjy Rtfzjfx Aqqsp

Year of construction: 2009, operating hours: 3,093 h, condition: ready for operation (used), travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 320, overall weight: 8,900 kg, total width: 3,400 mm, total height: 3,160 mm, product length (max.): 5,800 mm, spindle speed (max.): 1,600 rpm, table load: 2,500 kg, number of axes: 5, This 5-axis MSC Chemnitz BFT90/5 MSC boring machine was manufactured in 2009. It features a substantial table size of 1000 x 1120 mm with a maximum table load of 2.5 t. The machine offers impressive feed rates of 4000 mm/min and a spindle speed range of 4 – 1600 rpm. If you are looking to get high-quality boring capabilities, consider the MSC Chemnitz BFT90/5 MSC machine we have for sale. Contact us for further details. • Table size: 1000 x 1120 mm • B axis (table rotation): 360° • Feed rate (X/Y/Z): 4000 mm/min • Spindle diameter: 90 mm • W axis travel: 710 mm • Control cabinet dimensions (L x W x H): 2.0 x 0.75 x 2.0 m • Temperature range: 15–40 °C • Electrical: 3-phase/50 Hz; 380 V rated voltage; 24 V control voltage • Connected load: 40 kW • Fuse rated current: 100 A • Typical power consumption: approx. 7.5 kW • Spindle running time: 3069 h • Power-on hours: 10402 h • General overhaul: 2009 General Information Retrofit Retrofit includes: • Control system: TNC 320 • New drives in all axes • New table • New clamping system • New media units • New hand control unit • New coolant system • New hydraulic unit • 30 measuring scales (linear measurement systems) • Control manufacturer: SK 40 • CNC control: TNC 320 • Complete electrical retrofit • New wiring throughout the machine • Integration of CNC system (TNC 320) • New inputs and outputs (I/O) • New sensors and measuring systems • Updated control circuits and safety circuits • Modern CNC control system • Improved accuracy due to new measuring systems • Higher reliability • Better performance due to new drives • Reduced downtime due to new auxiliary units • New electrical documentation • Updated schematics Hsdpfx Ajy Hvgtsqqop • Includes systems for power supply, control, machine interface, operator panel, and drivesMachine base remains:MSC Chemnitz table boring machineType: BFT 90/5 MSC – 5 axes Technical Specification Taper Size SK 40

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Hodpfxjy Eqtio Aqqsp

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,200 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 3,000 rpm, table load: 16,000 kg, number of axes: 5, This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details. • Working spindle diameter: 130 mm • Clamping: ISO 50 • Spindle extension (W): 800 mm • Table clamping surface: 2500 x 3000 mm • Control: HEIDENHAIN iTNC530 + handwheel • Motors and drives: SIEMENS • Scope of repair 2026: • Cleaning the machine • Checking and adjusting machine geometry • Checking machine functionality • Revision of electrical equipment • Revision of hydraulics and lubrication • Adjustment of clearances and optimization of drives • Replacement of guide surface wipers • Repair of telescopic machine cover • Replacement of balancing ropes • Repair of the platform • Revision of CHOV-K 20 bar cooling • Revision of automatic tool changer AVN60 Hsdpfey D R D Isx Aqqsp • Machine with guarantee – please contact us for more information Additional equipment • CNC table – fully controlled B axis • CHOV-K 20 bar spindle axis cooling (emulsion / through-spindle coolant) • AVN60 automatic tool changer • CE platform and fence (guarding) • Chip conveyor

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: 430M, total width: 5,350 mm, total height: 4,020 mm, spindle motor power: 18,500 W, product length (max.): 5,150 mm, spindle speed (max.): 6,000 rpm, tool weight: 3,500 g, number of axes: 6, This 6-axis IXION AUERBACH IA2 TLF-1200.4 drilling machine was manufactured in 2004. It features an impressive X-axis travel of 1,200 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 700 mm. The machine includes a robust rotary table surface of 1,000 x 1,000 mm and a maximum workpiece weight capacity of 7,000 kg. If you are looking to get high-quality drilling capabilities, consider the IXION AUERBACH IA2 TLF-1200.4 machine we have for sale. Contact us for further details. • Axes travels: • W (deep hole drilling/milling unit, horizontal): 1,200 mm • A (swiveling deep hole drilling/milling unit): +25° / -15° • B (NC rotary table): 360° • Rotary table: 1,000 x 1,000 mm, 5 T-slots • Max. workpiece weight: 7,000 kg • Max. torque: 115 Nm • Deep drilling capacity: • Max. depth (single pass): 1,200 mm • Diameter range: 3 – 25 mm (up to 36 mm with ELB in reinforced version) • High-pressure coolant system: 100 bar at 42 l/min (upgrade option 001b to 95 l/min) • Tool changer: 24 stations • Max. tool length: 300 mm • Max. tool diameter: 90 mm (160 mm with free adjacent pockets) Hodpfx Aqeyzgvueqep Additional equipment • Full enclosure with roof • Oil mist extractor • Chip conveyor • 2 traveling steady rests • Deep drilling start package: tool holders and Botek Type 110 tools for various diameters Technical Specification Taper Size ISO 40

Year of construction: 1987, condition: ready for operation (used), Drill diameter: 65mm, outreach: 380mm, tool holder: SK50, speed: 1600rpm, table dimensions X/Y: 630mm/500mm, rapid traverse Z: 4750mm/min, drilling capacity steel/cast iron: 65mm/80mm, thread cutting capacity steel/cast iron: M68/M72, machine dimensions X/Y/Z: approx. 1500mm/1200mm/2950mm, weight: approx. 2000kg, control: PLC. Including three tool holders, safety enclosure, minimum quantity lubrication system, spare parts and digital readout. Without milling head attachment and drill crown. The control cabinet has optical damage. Documentation available. An on-site inspection is possible. Hodpfx Asyviyfjqqop

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Hodsylbrqjpfx Aqqep

Condition: ready for operation (used), Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment. Hedoykut Sjpfx Aqqep

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, machine/vehicle number: 97-VP461, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 350 mm Spindle speed: 20,000 rpm Tool changer positions: 30 MACHINE DETAILS Control manufacturer: Fanuc EQUIPMENT Hedpjyi U Iajfx Aqqop BT 40 Big Plus tool holder 4th axis table Oil mist minimum quantity lubrication system

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal • Tool magazine: 30 positions Technical Specification Hsdpfx Aeyguz Usqqsp Taper Size ISO 50

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Hodpfx Aqjyfgd Eoqep Electrical connection: 400 V Weight: 395 kg Required space: 4100 x 1670 x 1450 mm

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 2,500 rpm, number of axes: 5, This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Hodpfsyar D Hox Aqqjp • Rotary table clamping surface: 2200 x 1800 mm Extra Information Working spindle diameter: 130 mm Technical Specification Taper Size ISO 50

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: tnc 530, spindle speed (max.): 1,200 rpm, swivel angle B-axis (max.): 360 °, number of axes: 5, This 4-axis MONTAVAR HBG 105 CNC was manufactured in 2009. It features X-axis travel of 2000 mm, Y-axis travel of 1250 mm, Z-axis travel of 1000 mm, W-axis stroke of 600 mm, and B-axis rotation of 360 degrees. Equipped with Heidenhain TNC 530 controls and a maximum RPM of 1200. If you are looking to get high-quality milling capabilities consider the MONTAVAR HBG 105 CNC machine we have for sale. Contact us for more information. Extra Information Machine still under power Hedpfx Aqox N Dd Eeqjp

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,220 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1600 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. • Control system: NCT-104 Spindle • Spindle diameter: 130 mm • Taper: ISO 50 (7:24) • Spindle speed range: 10 – 1500 rpm • Max spindle torque: approx. 2350 Nm • Main motor power: 37 kW Axis Travels • X-axis travel: 3500 mm • Y-axis travel: 2000 mm • Z-axis travel: 1220 mm • W-axis (spindle quill travel): 570 mm Table • Rotary table size: 1600 x 1800 mm • Max workpiece weight: 12,000 kg • T-slots: 22 x 9 x 160 mm • B-axis table feed: 0.03 – 1.5 rpm Feed Rates • Rapid traverse (X / Y / Z / W): 2000 mm/min Power Hodpfsx Imtaox Aqqep • Total power requirement: approx. 80 – 83 kVA

Year of construction: 2010, condition: ready for operation (used), Drilling unit / profile drilling machine Alzmetall AC32, drill head. The maintenance work includes: new disc spring set in the drill head (11/2025), new servo motor for speed adjustment (09/2025), new disc set for shaft 2 (approx. 09/2023) and a complete belt replacement (11/2024). Note: V ribbed belt is 1.4mm before the wear limit. Inspection by appointment possible. Hedpex Ecvcefx Aqqop

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Hodpoxyk Tlefx Aqqjp

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Hodpfx Aexp Rb Ioqqop

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 3000mm/2300mm/1600mm, travel W: 700mm, max. table-to-spindle distance: 2300mm, table dimensions X/Y: 1800mm/2200mm, max. table load: 10000kg, spindle diameter: 130mm, spindle speed: 2500rpm, rapid traverse X/Y/Z: 10m/min, rapid traverse W/B: 5000mm/min/500mm/min, feed X/Y/Z: 4m/min, tool holder: BT50, tool positions: 38, positioning accuracy X/Y/Z: +/-0.008mm, positioning accuracy W: +/-0.012mm, repeatability X/Y/Z: +/-0.004mm, repeatability W: +/-0.008mm. Machine dimensions X/Y/Z: approx. 7050mm/7200mm/4800mm, weight: approx. 37000kg, control: TOSNUC-888. Documentation available. An on-site inspection is possible. The machine is located in China. Hedpfx Aoxf Ikrsqqop

Year of construction: 2009, condition: ready for operation (used), A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Hsdpfxoxd Avgo Aqqjp

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Hsdpsw T U Ubjfx Aqqop Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)