hydraulic Press VEB Wema Zeulenroda PYTE 3,15
Nc9hj
C-stand eccentric press WMW PEEV 16/IV
- Press force: 16 tons
- Torque: 12,500 kg / cm
- Single stroke sheet thickness: 2.50 mm
- Continuous sheet thickness: 1.25 mm
- Pusher stroke adjustable at: 64 mm
In8kb0gz
- Max. Dist ...
tray trolleys Rational Production s.r.l. NEW UNITRAY 20
Maintaining the desired food temperature both in the refrigerator and in the oven.
00rmgciz
The tray is half in the warm and half in the cold area. 10 pieces are inserted from each side.
Typical si ...
Adsorption dryer KAESER ACT 601
- incl. 3 pcs. Post-filter SPX Fi10 (display device defective to a filter)
- Activated carbon filter
- Capacity: 60 m3 / min (10 bar)
- Working pressure min / max: 5/10 bar
- Inlet temperature: 2 to ...
Assembly press / joining press Ulbrich 12-74512
Press force: 1 - 21,5 kN
max. hub length: 0 - 200 mm
Press speed: 2 - 40 mm/sec
Feed rate speed: 2 - 180 mm/sec
Retrun stroke speed: 180 mm/sec
E- connection load: 3 kW
Amount of oil: ca. 40 l
The ma ...
Vibration-dampened optical table Speirs Robertson CarbonBlack Series
Damping takes place via rubber bearings
2la3be8d
Typical usage traces
No accessories
Portal crane hall crane VETTER Krantechnik GmbH P300 + SIXX6F
Gantry crane type: P300
- bolted steel construction
- The traverse has a traction drive
- The chain hoist is moved manually on the crossbeam
Chain hoist type: SIXX6F
- Lifting speed: 4/1 m / min
- S ...
glue machine HILGER u. KERN ELDO - MIX 303
The ELDO-MIX 303 is a dishwasher-free gear metering and mixing system
It is used to process low to medium viscosity multi-component media.
The media based on e.g. Epoxy, polyurethane or silicone are c ...
Pump HILGER u. KERN ELDO-MIX 303 / Pumpe 30
Delivery as shown
Machine is loaded on pickup, on a suitable for the transport vehicle, free.
M8cen
• max 6 bar
Information according to manufacturer
further technical data please refer t ...
Pump HILGER u. KERN ELDO-MIX 303 / Pumpe 10:1
Pump 10: 1 for gear metering & mixing plant
Clyhiwig
Delivery as shown
Machine is loaded on pickup, on a suitable for the transport vehicle, free.
Information according to manufacturer
further techn ...
Continuous furnace Centrotherm DO-HTO-5.200-200
Power: 41 kW
Load current: 64A
Infeed: 3 / N ~ 400/230 V 50 Hz
Switching capacity: 25 kA
Baoop3codb
Information according to manufacturer
The system is without control PC
!!! No software !!!
furth ...
Continuous furnace Centrotherm DO 4.500-200-HTO-CANtrol
Power: 23 kW
Electricity: 43A
Voltage: 3 / N ~ 400 / 230V
Frequency: 50 Hz
20khs7
Information according to manufacturer
The system is without control PC
!!! No software !!!
further technical data ...
Demagnetizer STUTE MAGNET TECHNIK ETS 100 S
Can be used in continuous operation (100% ED).
Delivery as shown.
Bamqv3wspu
- Connected load: 230 VAC 50 Hz / 2.5 A
- magnetic field strength: 25000 A / m
Automatic module framing station OLBRICHT GmbH Rahmungsstation
178/5000
After a robot has placed the laminates in the framing station, they are pressed with an aluminum frame.
R3ld8klp
Delivery as shown.
- max frame size: 2200 x 1200 mm
Measuring system MICRO-EPSILON-MESSTECHNIK GmbH & Co. KG dimCONTROL 8260
Goal of the measuring system dimensionCONTROL is the non-contact geometry measurement of ingots. In particular, target values are measured the deviation of side lengths, stage length, angle and diagon ...
Vertical dipping system ILSA S.P.A. IW55
Vertical dipping system for detaching workpiece carriers from ingots
Machine no .: IW5562012
The system is designed for removing workpiece carriers from silicon ingots by immersion in the hot water ...
Vacuum Pump Leybold D 65 BCS + WSU 251
The pump level consists of:
- 1x Oil-sealed vacuum pump TRIVAC D 65 BCS
93bozt28s
- 1x rocker piston pump
- 1x frame
TRIVAC D 65 BCS
Connection flange Suction side: DN 40 ISO-KF
Connection flang ...
Loading and unloading Wafer handling Manz AG SPSL1/SPSU1
Substrate handling system consisting of loading and unloading.
Robot-controlled handling system, with optical control system, turning unit, industrial PC, operator panel, tach counterpart
Bnea2t0n
...
Dewaxing station Wafer LOTUS
The system shown is sold as a spare dispenser. The control is partly taken.
Chycm8xi
The illustrated ILSA IW55 is not part of this offer
- Year of construction: 2008
- machine number: 06011633 ...
Temperature control unit frigofluid/ E.BRAUN FWC 19/CW-LT
GC No .: 4725
Serial No .: 14063
Voltage: 400 V / 50 Hz
Power consumption: 12 A
Cooling pipe: 11 kW (+ 1 ° C)
Vimphvba
Refrigerant: R407C
Hydraulic unit Hydraulic pump 77732 Bosch Rexroth AG ABSKG-60AL9/VGF2-016/132S/63N /014C504A
Manufacturer number: R901181798
Gear pump; Internal toothed type GF2-016
QVmax: 23.2 l / min
Engine: Hoyer Motors / Type MS132S-4 / 5.5 kW 50 Hz (400 V) / 6.6 kW 60 Hz (480 V)
Container: aluminum (60 ...
You are chatting with: 
Your contact person: 
Your contact is typing
+1 312 94 04 581
+44 (0) 20 806 810 84
+49 (0) 201 857 86 10
+48 (0) 223 076 958
+39 800 12 58 38
+34 911 433 456
