CNC-STEP GmbH & Co. KG

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 feed 10/5 m/min Table 3000 x 2000 mm control FANUC Lajdpezmitkjfx Agpjd dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Lasdjzlt Ayspfx Agped This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: excellent (used), operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, table length: 3,656 mm, table width: 1,956 mm, High-Performance 5-Axis Waterjet Cutting Machine Well-maintained OMAX 60120 CNC Waterjet Cutting System equipped with a 30 kW (40 HP) EnduroMAX 4060 high-pressure pump. The pump has only 4,500 operating hours, making this machine an excellent choice for companies seeking a reliable and productive waterjet system with significant remaining service life. This machine is equipped with the OMAX A-JET 5-axis cutting head, enabling bevel cutting and complex 3D machining. The A-JET head offers a tilting angle from 0° to 59°, providing exceptional flexibility for chamfers, weld preparation, and advanced contour cutting. The machine features the integrated OMAX CAD/CAM control system, allowing direct import and processing of DXF files for fast and efficient production. Technical Specifications * X / Y / Z Travel: 3,000 × 1,500 × 200 mm * Working Area: 3,000 × 1,400 × 150 mm * Table Size: 3,656 × 1,956 mm * Maximum Workpiece Load: 2,000 kg/m² * Machine Dimensions: 5,715 × 2,794 mm * Machine Height: 2,921 mm * Machine Weight (table only): 2,818 kg * Operating Weight (including water): 10,545 kg * Water Tank Capacity: 7,727 liters Control System Lajdezi Hhqepfx Agpjd * Integrated OMAX CAD/CAM software, Intelli-MAX® Premium * Direct DXF file compatibility * Industrial PC controller Electrical Specifications * Power Supply: 400 VAC, 50 Hz, 3-phase * Fuse Protection: 80 A High-Pressure Pump * Model: EnduroMAX 4060 * Pump Power: 30 kW (40 HP) * Operating Hours: Only 4,500 hours * Maximum Pressure: 4,100 bar * Flow Rate: 1.5-3.6 l/min * Pump Dimensions: 915 × 1,676 × 978 mm * Pre-filter: 0.2 micron * Integrated Water Pre-Booster: 6.7 bar Included Equipment * OMAX A-JET 5-axis cutting head (0°-59° tilt) * Abrasive hopper / abrasive feed system * Water treatment system * Sludge removal system Highlights * Premium OMAX 5-axis CNC waterjet cutting system * A-JET bevel cutting head with 0°-59° tilt * EnduroMAX 4060 pump with only 4,500 operating hours * Abrasive feed system included * Water treatment system included * Sludge removal system included * Integrated CAD/CAM software with direct DXF import * Large cutting area suitable for a wide range of materials * Robust industrial construction * Ready for immediate operation This is a fully equipped, high-specification OMAX waterjet system offering precision, flexibility, and low operating hours. An excellent opportunity for manufacturers looking for a premium CNC waterjet solution that is ready to go straight into production.

Condition: used, Year of construction: 2012, functionality: fully functional, MBM ASAS ME Lsdpfx Agezh U Naepoad Pump cleaning system for Abrasve Waterjet machines Used - construction Year 2012

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, total height: 4,100 mm, total width: 5,800 mm, overall weight: 2,100 kg, product length (max.): 7,500 mm, number of axes: 3, This 3-axis CMS Smartline 2040 waterjet cutting machine was manufactured in 2023. It features an impressive X-axis stroke of 4,000 mm, Y-axis stroke of 2,000 mm, and a maximum cutting thickness of up to 220 mm. The machine includes a robust worktable size of approximately 4,150 × 2,080 mm and is equipped with a high-pressure intensifier pump. If you are looking to get high-quality cutting capabilities, consider the CMS Smartline 2040 machine we have for sale. Contact us for further details. • Max worktable size: approx. 4,150 × 2,080 mm • Cutting system • Technology: Abrasive waterjet • Cutting head: 3-axis waterjet cutting head (CMS Tecnoucut) • Max cutting thickness: up to 220 mm (material dependent) • Interpolated CNC cutting for complex shapes • Automatic Z height control • Axes and motion • CNC controlled axes: X, Y, Z • Motors: Brushless • Guides: Recirculating ball linear guides • Drive system: Rack & pinion (X/Y), ball screw (Z) • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Waterjet pressure system • Maximum working pressure: approx. 4,150 bar (60,000 psi) • Pump power: approx. 22.5 kW • Note: High-pressure intensifier pump 30 CP included; see Additional equipment • Control and software • CNC control: OSAI Open • HMI: CMS Active interface • CAD/CAM: EasyCut / EasyPump compatible • Touchscreen control panel on mobile stand • Worktable and load • Material support: Steel grid table • Max table load: approx. 500 kg/m² • Electrical and utilities • Power supply: 400 V / 50 Hz / 3-phase • Installed power: approx. 35–40 kVA (configuration dependent) • Protection class: IP54 (control cabinet) • Safety and equipment • Safety guards and photoelectric barriers Lodpfx Agszh Itxjpsad • Automatic lubrication system (X, Y, Z) • Collision detection system for cutting head • Laser pointer for zero-point setting • Electrical cabinet and control console Additional equipment • High-pressure intensifier pump (30 CP) • Abrasive feeding system (270 kg capacity) • Air compressor

Condition: excellent (used), Year of construction: 2019, operating hours: 288 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 1,100 kg, type of input current: three-phase, input voltage: 400 V, pressure: 4,000 bar, positioning speed: 6,000 m/min, water pressure: 4 bar, power: 37 kW (50.31 HP), Waterjet Cutting System All-Powerful Science & Technology Stock Co., Ltd APW 3015 BA Year of manufacture: 2019 Ledpfx Agozh Eq Uopsad Lightly used, very good condition Operating hours: 288 cutting hours, 2203 operating hours Travel distance X: 3000 mm Travel distance Y: 1500 mm Travel distance Z: 150 mm Maximum feed rate: 6000 mm/min Maximum pressure: 410 MPa (4100 bar) Continuous operating pressure: 340-360 MPa (3400-3600 bar) Swiveling cutting head, deflection range 0-10° Cutting accuracy: ± 0.1 mm The components used are from well-known manufacturers, e.g. SKF, Yaskawa, TBI Motion, etc. The high-pressure pump is from A&V Waterjet Tech Inc. USA A second, unused spare high-pressure pump is also installed. Machine dimensions, cutting table: 4200 x 2800 mm Space required for cutting table & control & pump & water filtration system and abrasive feed system approx. 6 x 5 m Water requirement for cutting at least 3.7 l/min, recommended 10 l/min Maximum workpiece weight: 250 kg/m² Axis drives: AC servo Pump power: 37 kW Connection: 400 V, 3-phase Special accessories, included in the price: Spare high-pressure pump Positioning laser Collision protection Air conditioning unit for oil cooling CAM software with part placement 4 clamping units 1500 kg abrasive blasting sand Removable protective covers Wastewater filtration system with filter fleece (Matchling MCL-P5N) Spare parts and wear parts set The machine is located in a precision engineering workshop. The protective covers reduce dust levels. Optional Commissioning, price based on effort Basic training, price based on effort

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. Lajdszhkmuepfx Agped The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: good (used), Year of construction: 2023, operating hours: 1,842 h, functionality: unexamined, Windows-based control system for high-pressure pump BFT Ecotron 40.37+, year of manufacture 2023, operating hours: approx. 821 h. Cooling unit SK 3303500. Centrifugal pump Lowara PLM490B14S2/311 E3. Centrifugal pump Lowara NSCE 50-125/11X/P45RCS4. Operating hours of the system, read from the control cabinet: approx. 1,842.5 h. Dimensions of the entire system: approx. 440 × 440 cm (L × W). Tank dimensions: approx. 440 × 325 cm (L × W). Abrasive material storage tank for dry sand (garnet sand / cutting sand), with a screen insert. Laodezgha Njpfx Agpsd

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Laedpfjzcwupsx Agpjd Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) Laodpfxozbz Evj Agped 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, number of axes: 5, This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Additional equipment • Smart Abrasive Reserve Tank Included • Tank Capacity: 350 kg • Tank Pressure: 6 bar • Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) Machine Benefits Technical Machine Benefits • Axes: 5-axis waterjet cutting machine • Cutting size: 4000 × 2000 × 250 mm • Type: cnc 5-axis, bridge type • Step accuracy: 0. 01 mm • Controller: esa 5-axis controller with ethernet, usb, and manual handwheel (x/y/z) • Cam program: semi-automatic nesting / automatic input-output system • Rapid traverse speed: 30000 mm/min Extra Information Ledpfx Aszbcmhsgpoad Condition: Very good technical condition, low number of working hours Movement Axis Motors: X-axis: 1 × 3.2 Nm servo motor Y-axis: 2 × 3.2 Nm servo motors Z-axis: 1 × 1.6 Nm servo motor with brake A-axis: 1 × 1 Nm servo motor with brake C-axis: 1 × 1 Nm servo motor with brake Transmission System: Helical hardened racks and pinions Linear Bearing: THK linear slides and rails Injection Unit High Pressure Pump: MJT-4000 Operating Pressure: 4000 bar constant (24h non-stop) Motor: 50 HP / 37 kW, 1500 rpm, 50/60 Hz High Pressure Flow Rate: 2.3–3 L/min Pressure Adjustment: 1000–4000 bar in 500 bar steps Orifice Diameters: 0.18 / 0.25 / 0.30 / 0.35 mm Hydraulic Pump: 71 cm³ (103 L), axial piston pump max. 200 bar Cooling Water Flow: 30 L/min Optimum Water Inflow: 4 bar Adjustable Pressure Water Pump: 10–16 bar

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 310 mm, warranty duration: 12 months, pump pressure: 2,000 bar, power: 3.7 kW (5.03 HP), OMAX ProtoMAX® – the smallest industrial-grade waterjet cutting system in the world! Its compact design, combined with its comprehensive versatility, makes the ProtoMAX® waterjet cutting system a perfect solution for applications such as the production of small batches and prototypes, as well as for educational purposes. Furthermore, the ProtoMAX® can also be used as a complement to larger waterjet cutting systems. Thanks to its small footprint, the ProtoMAX® waterjet cutting system is ideally suited for smaller spaces. Mounting the system on rollers allows for easy and straightforward relocation. ✔ 3.7 kW pump with 2,000 bar operating pressure ✔ Cutting thickness up to 25 mm for a wide range of materials ✔ Efficient and reliable pump technology with direct drive ✔ Includes laptop with pre-installed CAD/CAM software Lasdoy Umphspfx Agpjd ✔ Quiet and clean underwater cutting (< 76 dB) ✔ Protective cover with safety switch ✔ Clamping device for securing the material A timely delivery can be arranged with INNOMAX AG. This is a demonstration machine.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep AquaCut-W 4001.20 was manufactured in 2018. It features a working range of 4,000 x 2,000 mm and is equipped with a high-pressure pump system capable of 400 MPa. The machine includes automatic height control for the cutting head and a waterjet cutting table with grid support. If you are looking to get high-quality waterjet cutting capabilities, consider the MicroStep AquaCut-W 4001.20 machine we have for sale. Contact us for further details. Ledpfx Asy Ui Hpegpead - CNC Control Unit: MicroStep iMSNC with MMI console, 24" touchscreen, and two LCD operator units on the gantry- Working Range / Processing Area: 4,000 x 2,000 mm- Laser Pointer: Laserpointer with automatic offset transmission- Control Modules: Expert system, Service & Maintenance wizard, CNC program loading wizard, Automatic mechanical scanning calibration, Cutting program management (MRP), EcoInfo, MachineInfo, User-Management- CAM Software: AsperWin Basic, AsperWin Select macro library, AsperWin NC-Sim simulator- Connectivity: USB 3.0 port, MicroStep Remote Diagnostics, TeamViewer access, GSM Modem for SMS error notifications- Cutting Table: Waterjet cutting table with grid support- Height Control: Automatic height control for the waterjet cutting head- High-Pressure Pump System: BFT ECOTRON 40.37- Pump Permissible Working Pressure: 400 MPa (4,000 bar)- Pump Max Flow Rate: 3.8 l/min- Pump Tank Capacity: 140 liters- Pump Power Consumption: 39 kW (at 3*400 V, 50 Hz) / 46 kW (at 3*480 V, 60 Hz)- Pump Gross Weight: 1,110 kg- Pump Serial Number: 16414- Pump Drawing Number: 120343- Cutting Head: Allfi Cutting Head Type IV (1 unit)- Abrasive Head: Allfi Abrasive Head CENTERLINE Typ II "Long Life" (1 unit)- Abrasive Systems: Allfi Abrasive Dosing system, Allfi Abrasive Conveying System Type II, Automatic abrasive dosing via CNC- Sludge Removal: Desludging system (scraper conveyor) for 4,000 mm length, including sedimentation tank- Water Conditioning: Water stabilization dosing unit using WIN2054Si water chemistry- Safety Equipment: Double-sided cable pull safety mechanism (collision protection) via Emergency Stop- Total System Layout Footprint Dimensions: Approx. 7,122 mm (Length) x 4,200 mm (Width) (Main machine footprint alone is 7,122 mm x 3,476 mm)- Required Flooring Base: Concrete min. B20, thickness min. 200 mm, surface evenness ±5 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 14,052 h, functionality: fully functional, machine/vehicle number: M15305531R, repeat accuracy: 0.02 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, positioning accuracy: 0.07 mm, TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 305 mm Material thickness: for example, 200 mm steel, grade S355, with a tolerance of +/- 0.5 mm Repeatability: 0.02 mm Positioning accuracy: 0.07 mm Travel speed (max.): 12,500 mm/min Workpiece weight (max.): 1,450 kg MACHINE DETAILS Lajdpfx Agsy Sm Ewsped Type of input current: Three-phase Input voltage: 380 V Pump: 30 HP (22 kW) Abrasive media container: 1,000 kg Operating hours: 14,052 h

Condition: new, Year of construction: 2026, functionality: fully functional, OMAX 2652 är en kompakt och högpresterande abrasiv vattenstråleskärmaskin, betrodd av verkstäder och plåtbearbetningsanläggningar världen över för sin snabbhet, precision och pålitlighet. TEKNISKA SPECIFIKATIONER Skärområde: 1 320 x 660 mm X-axelns rörelse: 1 320 mm (52") Y-axelns rörelse: 683 mm (26,9") Z-axelns rörelse: 150 mm Maximal skärhastighet: 4 572 mm/min Skärtolerans: ±0,025 mm Maximal bordsbelastning: 1950 kg/m² Drivsystem: Slutna digitala drivsystem, borstlösa servomotorer Linjär rörelse: Förspända kulskruvar, cirkulerande kullager Muntycke: OMAX MAXJET 5i Lajdpfx Asy Na U Hegped Z-axel: Programmerbar, motoriserad Mjukvara: Intelli-MAX® Suite (integrerad CAD/CAM) Rördragning: Sax-baserad hårddragning (inkapslade högtryckskomponenter) Vattennivåstyrning: Rapid Water Level Control – nedsänkt skärning under 80 dBA NYCKELFUNKTIONER • Skär praktiskt taget alla material – metaller, rostfritt, aluminium, koppar, mässing, sten, glas, kompositmaterial och plast • Ingen värmepåverkad zon – ingen deformation, ingen oxidation, ingen efterbearbetning behövs • Inga verktygsbyten – minimal uppspänning, snabb iordningställning • Miljövänlig – använder endast vatten och naturligt granatsand-abrasiv • Kompakt format – idealisk för yteffektiva verkstäder • Obegränsad utbildning ingår under maskinens livstid Skick: Fabriksny Leverans: Sverige och Danmark Service & reservdelar: Full support tillgänglig Kontakta oss för pris och mer information.

Condition: new, Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Ledpfjy H Hbnox Agpead Water flow rate: max. 2,8 ltr. / min

Condition: ready for operation (used), Year of construction: 2010, operating hours: 1,760 h, functionality: fully functional, For sale: professional abrasive waterjet cutting machine MAXIEM 1530 by OMAX Corporation. Fully operational, ready to work. Technical specifications: - Work envelope X-Y: 3,100 × 1,575 mm - Pump: OMAX P2050V Direct Drive 30 HP (22 kW), up to 50,000 PSI (3,450 bar) - Control: IntelliMAX Basic with CAD/CAM - Drive: closed-loop, hardened precision ground shafts, linear encoder - Traverse speed: up to 20 m/min - Accuracy: ±0.13 mm - Z-axis: motorized Included accessories: - Terrain Follower, Optic Locator - 200 L abrasive delivery system - Basic tool box kit - Tool cabinet Lajdpfxoy Hgrmj Agpsd

Condition: excellent (used), Year of construction: 2017, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: 2040 Waterjet, workpiece weight (max.): 11,975 kg, type of input current: three-phase, feed length X-axis: 4,216 mm, feed length Y-axis: 2,134 mm, feed length Z-axis: 305 mm, total height: 2,692 mm, total length: 4,902 mm, total width: 2,134 mm, For sale: MAXIEM 2040 (OMAX) waterjet cutting system, manufactured in [year], designed for precision cutting of a wide range of materials including metal, stainless steel, aluminum, stone, glass, plastic, etc. Ideal for industrial production or machining workshop. Main features: - Working area: 2040 mm - Cutting system: waterjet (abrasive waterjet) - CNC control included, 5 axes - Condition: operational, well maintained - Ergonomic design and safe operation Lsdpfx Aoy E Tr Degpoad The machine has been used under good conditions and can be demonstrated in operation upon request. The system is sold together with the associated equipment (details on request).

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Lasdoy D A Ifepfx Agpjd Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Pump, reducer, main motor of 37 kW, flush valve are overhauled. H2O Jet intensifier 60K 301001-1-R. Lajdpfjyxmmzjx Agped

Condition: good (used), Year of construction: 2012, Machine is in good working condition. Lasdoylx Hrspfx Agpjd

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4 x 2 m Equipment: 1 KMT OEM SL-VI 50 PS 4,000 bar cutting head with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source Lajdpfxeykqwtj Agpjd High-voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive metering system Collision protection system Water treatment system TCI HIDROSYSTEM 2.0 Sludge removal system Software: Lantek Expert 2D with automatic nesting function 22726

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: • Traverse speed: 500 in/min (12,700 mm/min) Lajdeya Eciepfx Agped • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display • No special foundation required • Ergonomic full table access • Made in the USA

Condition: refurbished (used), Year of construction: 2011, operating hours: 10 h, functionality: fully functional, travel distance X-axis: 6,096 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 200 mm, table length: 8,559 mm, table width: 3,861 mm, warranty duration: 12 months, feed length Z-axis: 200 mm, water pressure: 4,500 bar, cutting length (max.): 6,096 mm, cutting width (max.): 2,032 mm, OMAX Waterjet 80X-1 Features: - Omax PC-Based CNC Control - 50 HP Enduromax 5060V Pump - Closed-Loop Water Recycling System - Terrain Follower (Collision Sensing Follower) - Abrasive Removal System - Dosing System Machine Dimensions: Water tank dimensions: 8000 x 3300 mm 2x Sand cart dimensions: 1500 x 1000 mm Pump dimensions: 1700 x 1300 mm Hopper dimensions: 900 x 900 mm Height ranges between 1000 mm and 1500 mm Fully Refurbished High-Pressure System – Professional Technical Overhaul The machine offered for sale has undergone a comprehensive technical refurbishment, including a complete overhaul of the high-pressure pump and all critical high-pressure system components. All works were performed by a professional service team, focusing on restoring full performance, reliability, and long-term operational stability. 💦 High-Pressure Pump – Complete Overhaul The high-pressure pump has been: - Fully disassembled - All worn and critical components replaced or refurbished - Sealing elements, valves, and pressure-critical parts completely renewed Lasdpoyaiitsfx Agped - Operating parameters recalibrated to factory specifications As a result, the pump now provides stable operating pressure, quiet performance, and extended service life. ⚙️ High-Pressure Components All high-pressure system components operating in conjunction with the pump have been: - Thoroughly inspected - Replaced or overhauled where necessary - Pressure-tested to ensure safe, efficient, and reliable operation The machine is fully prepared for continuous industrial operation. ✅ Overall Condition Thanks to the extensive refurbishment, this machine is: - Technically fully renewed - Equipped with a completely refurbished high-pressure system - Ready for immediate operation It is an ideal solution for customers seeking a high-performance waterjet machine without the expense of new equipment, while maintaining professional reliability and precision. Ready for Shipping

Condition: used, power: 45 kW (61.18 HP), WATER JET MACHINE INTENSIFIER PUMP JET CUT 45 KW WORKING ORDER. large capacity pump that is capable of running single or multi head machines. Ledpfsx U Ax Ssx Agpoad spares package as shown