J. E. Wolfensberger AG

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Nsdpfxe Afc Nyo Ai Aswn Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Year of construction: 2019, operating hours: 7,400 h, condition: excellent (used), Pwer Register 2 New SMart Feedeer 2 Elevated 400 mm. Format max. 76x106 cm Format min. 35x40 Max speed 8,000 f/h Minimum 70 g/m2 paper Cardstock max 2,000 g/m2 Corrugated cardboard up to 4 mm. Hours worked 7,300 Njdpfx Ais Ad I Ulo Ajwn Bernoulli device Available Febr. - March 2027

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Nedpfxs Ad Hine Ai Aswn Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Nwsdo Ad Hihepfx Ai Ajn The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover Nsdpfxe Aaw Umo Ai Aewn - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. Nwode Aaw Uaepfx Ai Aon The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Year of construction: 1982, condition: used, functionality: fully functional, heavy duty B2+ die cutter size max 820x600 mm Nsdpsz Tk Axsfx Ai Aewn locks and frames spare die-cutting plate in production

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Nwedpfxez S Uxhe Ai Asn Equipped with an additional safety guard.

Condition: good (used), Ram Punch Busch model A Label die cutter Professional machine, German-made. In very good condition. Busch is a market leader in the production of pallet turners and punching machines. 100% functional, ready for production. Nwsdpfxsz S Uvme Ai Asn Technical specifications: Opening: 300 mm Max. format: 180 x 180 mm Cycle rate: 15/min Stroke length: 200 mm Capacity: 900,000 sheets/h Weight: 600 kg Equipped with a high-speed hydraulic power unit. Features clamps for mounting dies, with axial die adjustment. Feed table adjustable in all planes. Two operating modes: semi-automatic and manual. Includes a delivery tray (stacking tray).

Condition: excellent (used), WSK Intermarking Fritz Wagner Type 1164 – hot stamping / foil gilding machine Njdpez Sm Ucsfx Ai Ajwn

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: Nsdjz R Iq Uspfx Ai Ajwn – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg Nodpjz Rkitefx Ai Aswn 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), Offer includes: Heidelberg cylinder press, OHZ SBG, manufactured circa 1963, converted for die-cutting. Nwodpfez N Sv Eox Ai Asn

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Nwjdpfxoz N Sgde Ai Aen Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Nwsdsz N Sf Topfx Ai Ajn Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. Nwsdjz N Sftopfx Ai Ajn After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Nwedsz N Sfmjpfx Ai Aen

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Nwodpsz N Sfasfx Ai Aen Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately Nwedpfxez N Sd No Ai Aen 12-month warranty.

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine Nwjdpoz N Sdijfx Ai Ajn The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety covers – hard sheet metal for pressure

Year of construction: 2002, condition: excellent (used), functionality: fully functional, BOGRAMA Punching Machine – Multi BSM 450/220/15 - Manufacturer: BOGRAMA AG, Switzerland - Type: BSM 450/220/15 - Year of Manufacture: 2002 - Machine No.: 038/02 - Working Width: max. 450 mm - Performance: up to approx. 12,500 cycles/hour (depending on material and format) - Punching/Cutting Thickness: - Hole perforation: up to approx. 2 mm - Binder hole: up to approx. 5 mm - Cutting: up to approx. 5 mm - Strip steel cutting: material-dependent - Sheet Alignment: pneumatic front and side guides Nodpfsz I Ug Ajx Ai Aswn - Cycle Control: via photocell - Compressed Air Connection: 6 bar - Electrical Connection: 3 × 400 V / N / PE, 50/60 Hz - Fuse: 32 A - Applications: Punching, cutting, perforating, and hole punching

Year of construction: 2006, condition: excellent (used), functionality: fully functional, 1 used cutting and punching machine Manufacturer: BOGRAMA AG, Switzerland Type: BSM 450/220/15/Plus Year of manufacture: 2006 Machine No.: 232/06 Technical data / Equipment: - Cutting and punching machine - Working width up to approx. 450 mm - Product width up to approx. 220 mm - For cutting, punching and perforating Nwedpfx Aez I Uf Sji Asn - Punching thickness with Servo-Plus version up to max. 4 mm - Pneumatic connection: max. 6 bar - Robust design for professional use in post-press processing The technical specifications are based on the BOGRAMA data for this machine series; individual values may vary depending on the equipment of the specific machine.

Year of construction: 2008, operating hours: 2,893 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 0390062, Equipment: CE marking, YAWA MW1050 YA – High-Quality Machine in Very Good Condition Nedjz Hkm Nepfx Ai Ajwn YAWA MW1050 YA in very good condition, available for sale. This YAWA MW1050 YA has been well maintained and carefully operated throughout its service life. The machine has only been used for a few hours per day on average, making it an attractive opportunity for a buyer looking for a well-preserved and reliable machine. The machine is in very good overall condition and is ready for continued production. It has been operated in a professional production environment and has received regular maintenance and care. Machine highlights: Manufacturer: YAWA Model: MW1050 YA Very good overall condition Well maintained Only used a few hours per day on average Carefully operated Ready for immediate continued production Inspection possible by appointment This is an excellent opportunity to acquire a well-maintained YAWA MW1050 YA with relatively low usage and in very good working condition. Further technical specifications, photographs and additional information are available upon request.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Nwsdpez E A Nmefx Ai Asn Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: excellent (used), Year of construction: 1962, Ref: 11154 . 1962 Heidelberg SBG Cylinder Professionally converted for precision die cutting and creasing applications. Features: For die-cutting / creasing in packaging and commercial finishing Used for carton production, creasing, embossing, or die-cutting Cylinder mechanism ensures consistent pressure distribution Ideal for materials such as cardboard, paperboard, and synthetic substrates Highly efficient, accurate and durable Long-term mechanical reliability. Nwsdpfx Ajz Ek Nuoi Asn Comprising; Single sheet suction feeder Spring loaded gripper action Chain delivery 2 Standard chases. Specification: Max sheet size: 570 × 770 mm Min sheet size: 210 × 280 mm Max. impression area: 530 x 760 mm Speed: Max. 4,600 sheets/hour Machine size (L×W×H): 3,500 × 2,000 × 1,850 mm Net weight: 5,850 kg