BIGPRINT HUNGARY Kft.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Strata Dimension sst1200 3D printer with SCA-1200 thermal bath for removing support structures. All in very good as new condition. Dimension sst 1200: Working volume 254 x 254 x 305 mm Weight 150 kg Voltage 100-240 V Consumption 6-13 A 15 pcs of new support plates included SCA-1200 thermal bath for removal of support structures: Gedj Akdm Hspfx An Eeui Voltage 220-240V Consumption 10 A 1 bottle of solution for support removal included Cabinet with drawer for storing spare parts included Cabinet on wheels for easier movement

Condition: used, functionality: fully functional, machine/vehicle number: 2801325, Year of construction: 2013, type of input current: three-phase, input voltage: 400 V, input current: 15 A, compressed air connection: 6 bar, input frequency: 50 Hz, We offer a used SLM 280 HL 3D printer, manufactured in 2013. In 2017, it was upgraded with a Recoater V2 – a mechanical material distribution system – and two large filters were installed, with the option to switch between or use both filters simultaneously. The machine is still under the manufacturer’s maintenance contract. It was used for scientific research purposes. Manufacturer: SLM Solutions GmbH Model on the label: SLM280 Type stated on the housing: SLM 280 HL Machine number: SLM2801325 Year of manufacture: 2013 Operating voltage: 400 V Frequency: 50 Hz Phases and conductors: 3 / N / PE Rated current: 15 A Control voltage: 24 V DC Heating power: 1200 W Ingress protection rating: IP50 Gujdpfe Akdl Tsx An Eji Operating temperature: 18–30 °C Air pressure: 6 bar If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2014, overall weight: 148 kg, We offer a used Stratasys Dimension SST 1200es 3D printer – updated to Fortus 250, manufactured in 2014. Manufacturer: Stratasys Model: Dimension SST 1200es Part number: 180-00200 Serial number: P15776 Supply voltage: 100–240 V Current: 12–6 A Gedpfs Akdhwjx An Eoui Frequency: 50–60 Hz Weight: 148 kg Date of manufacture: 06/2014 A parts washer is available with the machine. If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: used, functionality: fully functional, machine/vehicle number: 8500242, Year of construction: 2017, operating hours: 6,500 h, We offer a used Stratasys J750 3D printer, manufactured in 2017. It has been upgraded to VeroUltraClear, Vivid+ VividFlex color. Manufacturer: Stratasys Guedps Akdfuofx An Eji Model: P750K-1 Serial number: 8500242 Year of manufacture: 2017 Rated voltage: 100–120 V Phase at 100–120 V: 1 Frequency at 100–120 V: 50–60 Hz Current at 100–120 V: 13.5 A Rated voltage: 200–240 V Phase at 200–240 V: 1 Frequency at 200–240 V: 50–60 Hz Current at 200–240 V: 7 A Rated short-circuit current: 1000 A If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 200 mm, number of axes: 2, Plastic 3D printer manufactured in 2011. This EOS Formiga P100 features a build volume of 200 x 250 x 330 mm and operates with a CO2 laser rated at 30 W. It includes advanced heating systems for both the process and removal chambers. If you are looking to get high-quality 3D printing capabilities, consider the EOS Formiga P100 machine we have for sale. Contact us for further details. Guedpfe Ai Sm Aox An Eoi - Build Volume (W x D x H): 200 x 250 x 330 mm - Standard Layer Thickness: 0.1 mm - Minimum Layer Thickness: 0.05 mm - Layer Thickness Uniformity: 0.01 mm - Resolution: 0.005 mm - Mechanical Axis Speed: 10 mm/s - Powder Dosing Principle: Roller in a roller trough - Process Chamber Heating Principle: Surface heating, powder bed temperature measurement via radiation pyrometer - Process Chamber Heating Power: 2.4 kW - Removal Chamber Heating Principle: Resistance heating elements with separate temperature measurement - Removal Chamber Heating Power: 2 kW - Laser Type: CO2 Laser - Laser Power (Wavelength 10.6 µm): 70 W - Laser Class (Closed optics box & mounted protective tube): Class 1 - Laser Class (Open optics box cover or dismounted protective tube): Class 4 - Focused Beam Diameter: 0.42 mm - Focal Length F-Theta Lens: 440 mm - Laser Beam Deflection (Scanner): High-speed rotating mirror deflection with precision galvanometer scanner, temperature compensation, integrated servo and interface electronics, digital signal processor - Exposure Field (W x D): 220 x 270 mm - Beam Deflection Speed: 5 m/s - Machine Electrical Connection: 3/PE 380V-415V AC 16A or 3/PE 200V-240V AC 20A-25A, 50/60 Hz - Machine Rated Power: 5 kW- Max weight with frame: 20 kg; Max virgin powder fill: 10 kg - Mixing Station Dimensions (W x D x H): 580 x 745 x 290 mm; Weight: 35 kg; Max powder container weight: 12 kg; Connection: 230 V (100V-240V), 50/60 Hz, 50 W, 1x1A-1x16A - P3 Screening Machine Dimensions (W x D x H): 640 x 800 x 1200 mm; Weight: 55 kg; Recycled powder container weight (filled): 25 kg; Connection: 400 V 3~/PE CEE, 16 A, 50/60 Hz, 0.16 kW, 3x 16A - Blasting Cabinet Dimensions (W x D x H): 1260 x 1230 x 1990 mm; Weight (without abrasive): 275 kg; Abrasive filling weight: 25 kg; Connection: 230 V (100V-240V) Schuko, 50 Hz, max. 2.6 A, 0.6 kW, 1x 10A - Software: P100 User Access / FORMIGA P 100

Condition: ready for operation (used), Year of construction: 2018, This TRUMPF TruDisk 4001 was manufactured in 2018. It features a laser rated output power of 4,000 W, adjustable from 80 to 4000 W, and a beam quality of 4 mm*mrad. The machine includes a GTV DepositionLine PF 2/2 twin-hopper powder feeder with a capacity of 1500 cm³ per hopper. If you are looking to get high-quality capabilities, consider the TRUMPF TruDisk 4001 machine we have for sale. Contact us for further details. Gsdpfs Ai Smxex An Ejui - Laser Output at Workpiece: 4,000 W - Laser Power Range (Adjustable): 80 - 4,000 W (Continuous) - Typ. Power Stability at Nominal Power: ±1% - Beam Quality: 4 mm*mrad - Numerical Aperture: 0.1 - Laser Wavelength: 1,030 nm - Min. Laser Light Cable Core Diameter: 100 μm - Laser Light Cable Type: LLK-D - Max. Number of Laser Light Cables: 2 - Electrical Supply (Voltage): 380 V (-10%) to 460 V (+10%), 3AC+PE - Electrical Supply (Frequency): 50 (-3) to 60 (+3) Hz - Connected Load: 20.0 kVA - Rated Current: 34.0 A / 400 V - Short-Circuit Current Rating: SCCR 134 A - Typ. Power Consumption at Nominal Output: 14.2 kW (15.5 kW incl. integrated compressor chiller) - Chiller Type: Water - Cooling Water Temperature Range: 5 - 28 °C (5 - 38 °C incl. integrated compressor chiller) - Min. Pressure Differential: 0.2 bar

Condition: used, functionality: fully functional, operating hours: 9,535 h, Stratasys F270 – Industrial FDM 3D printer – 9,535 operating hours For sale is a used Stratasys F270 3D printer with 9,535 operating hours. The unit is in very good condition and is fully functional. The F270 is suitable for the production of prototypes, functional models, and manufacturing aids. It offers four material bays for two model material spools and two support material spools, as well as automatic material change. Machine data Manufacturer: Stratasys Godpfe Ai Si Hjx An Eeui Model: F270 Printing process: FDM Operating time: 9,535 h Year of manufacture: June 2021 Condition: used, very good, fully functional Accessories: Build plates and printing materials can be purchased separately upon request. Price: upon request Location: 91275 Auerbach Availability: immediate Inspection and test print: possible Pickup / shipping: possible If you are interested, we look forward to receiving your inquiry.

Condition: ready for operation (used), functionality: fully functional, total length: 900 mm, total height: 2,000 mm, total width: 800 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 8, 2026, and December 12, 2026! Gedpfxj Ai Sbxs An Eoui TECHNICAL DETAILS Internal dimensions of the installation space: approx. 400 × 400 × 500 mm MACHINE DETAILS Operating voltage: 240 V Frequency: 50/60 Hz Rated current: 6–12 A Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 2,000 mm Weight: 500 kg External reference: Alesco - Lot 1

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, Complete system includes: • Markforged Metal X 3D printer • Markforged Wash-1 debinding unit • Markforged Sinter-2 industrial sintering furnace • Additional accessories, including argon gas controls, original transport case, spare build plates, mobile castors and isolation transformer Year: 2020 Machine/system number: 525389e4-9874-4408-810c-82126df2811f Gedpfx Anj Ai E Erj Eeui Recorded hours: 7,508 Condition: Ex-display system; purchased by current owner in 2025 and unused since purchase Build volume: 300 × 220 × 180 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 8,000 h, Metal 3D printer manufactured in 2016. This TRUMPF TruPrint features a laser capacity of 200W and has been in operation for 8000 hours. If you are looking to get high-quality 3D printing capabilities, consider the TRUMPF TruPrint machine we have for sale. Contact us for further details. • Laser capacity: 200W • Working hours: 8000h Gusdpo Aivb Sofx An Eji

Condition: excellent (used), Year of construction: 2020, Equipment: ABS, Mimaki 3D printer [3DUJ-553] full color modeling with the capability of world first over 10 million colors. Godo Aiimhopfx An Eeui

Condition: used, functionality: fully functional, machine/vehicle number: L2114, Year of construction: 2018, operating hours: 17,750 h, total length: 2,771 mm, total height: 2,281 mm, total width: 1,684 mm, type of input current: three-phase, overall weight: 2,870 kg, input voltage: 230 V, input current: 34 A, compressed air connection: 7 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 29 °C, positioning accuracy: 0.089 mm, electrical fuse: 40 A, feed length X-axis: 914 mm, feed length Y-axis: 610 mm, feed length Z-axis: 914 mm, Stratasys F900 – 2018 | Fully Maintained | Complete System The machine has been fully maintained by SYS Systems UK. Last calibrated 16/7/26. Last print was run on 24/09/26. Manufacturer: Stratasys Model: F900 Manufactured: 2018 Technology: FDM (Fused Deposition Modeling) Condition: Used Maintenance: Fully maintained by SYS Systems UK Build volume: 914 × 610 × 914 mm Layer thickness: 0.127,0.178,0.254,0.330,0.508 mm Material License Included: Nylon 12CF, ABS-M30, ABS M30i, ABS-ESD7, ASA, Nylon 6, Nylon 12, PC, PC-ABS, PC-ISO, PPSF, ST-130, Ultem 9085 (Including colours), Ultem 9085 CG, Ultem 1010, Ultem 1010-CG, Antero 800NA, Antero 840CN03, HIPS, KPC-FR, PC-ESD, PCABS-RD,VTXAM200 Included: Standard and Hardened print heads for use with CF family of materials. Backup external UPS for PC (in built UPS requires servicing), Various Nozzles, Build sheets, model and Support material cartridges. Printer can be viewed. Location: Available for inspection by appointment. Gsdj Aif Dbspfx An Ejui Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. Additional Support removal wash tank also available separately (500L heated tank) please ask for further details.

Condition: used, functionality: fully functional, machine/vehicle number: L0290, Year of construction: 2014, operating hours: 26,052 h, total length: 2,771 mm, total height: 2,281 mm, total width: 1,684 mm, type of input current: three-phase, overall weight: 2,869 kg, input voltage: 230 V, input current: 34 A, compressed air connection: 7 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 29 °C, positioning accuracy: 0.089 mm, electrical fuse: 40 A, feed length X-axis: 914 mm, feed length Y-axis: 610 mm, feed length Z-axis: 914 mm, power: 13.5 kW (18.35 HP), space requirement length: 4,210 mm, space requirement height: 2,941 mm, space requirement width: 3,573 mm, Stratasys Fortus 900mc – 2014 | Fully Maintained | Complete System The machine has been fully maintained by SYS Systems UK. Last calibrated 16/7/26. Last print was run on 14/10/26. Manufacturer: Stratasys Model: Fortus 900mc Manufactured: 2014 Technology: FDM (Fused Deposition Modeling) Condition: Used Maintenance: Fully maintained by SYS Systems UK - Updated to Gen2 Plus spec in 15/1/2025. Print Head assembly recently renewed with new unit at 11/2023 (3,971h of print time). Build volume: 914 × 610 × 914 mm Layer thickness: 0.127,0.178,0.254,0.330,0.508 mm Material License Included: ABS-M30, ABS M30i, ABSi, ABS-ESD7, ASA, Nylon 6, Nylon 12, PC, PC-ABS, PC-ISO, PPSF, ST-130, Ultem 9085, Ultem 9085 CG, Ultem 1010, Ultem 1010-CG Included: Various Nozzles, Build sheets, model and Support material cartridges. Gjdpfx As Ah Snkjn Eeui Printer can be viewed. Location: Available for inspection by appointment. Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. Additional Support removal wash tank also available separately (500L heated tank) please ask for further details.

Condition: used, functionality: fully functional, machine/vehicle number: P15176, Year of construction: 2014, operating hours: 11,531 h, total length: 838 mm, total height: 1,143 mm, total width: 737 mm, type of input current: AC, overall weight: 148 kg, input voltage: 240 V, input current: 6 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, electrical fuse: 13 A, feed length X-axis: 254 mm, feed length Y-axis: 254 mm, feed length Z-axis: 305 mm, Stratasys Fortus 250mc FDM 3D Printer – 2014 | Fully Maintained | Complete System The machine has been fully maintained by SYS Systems UK. Last calibrated 26/1/26. Guodpfx Ane Ah R T Rj Esi Last print was run on 24/11/25. Operating hours 11,531 h Manufacturer: Stratasys Model: Fortus 250mc Manufactured: 2014 Technology: FDM (Fused Deposition Modelling) Condition: Used Maintenance: Fully maintained by SYS Systems UK - Fans, Motion belts and ducting recently renewed. Build volume: 254 × 254 × 305 mm Layer thickness: 0.178,0.254,0.330 mm Included: Various Nozzles, Build Plates, ABS and Support material cartridges, Open materials chip re-programmer kit, Custom enhanced purge bin and purge shelf kit. Printer can be viewed. Location: Available for inspection by appointment. Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. Also available, support removal soak box for post processing water soluble support material. ask for more details.

Condition: used, functionality: fully functional, machine/vehicle number: Serien Nr. 6615N236, Year of construction: 2015, operating hours: 4,500 h, total height: 1,818 mm, type of input current: three-phase, overall weight: 2,200 kg, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, laser power: 400 W, electrical fuse: 32 A, space requirement length: 2,542 mm, space requirement height: 2,000 mm, We are offering this used Conceptlaser M2 cusing 3D printer, manufactured in 2015, for sale. Type: M2 cusing Serial number: 6615N236 Year of manufacture: 2015 Power supply: 3P/N/PE AC 400 V ± 10 %, 50/60 Hz Maximum current draw: 17 A/phase Compressed air: 7–8 bar Inert gas: 5 bar Guedpfxj Ah Imbe An Eji If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,854 h, total length: 2,250 mm, total height: 1,450 mm, total width: 1,250 mm, type of input current: three-phase, overall weight: 750 kg, input voltage: 230 V, input current: 30 A, input frequency: 50 Hz, feed length X-axis: 380 mm, feed length Y-axis: 284 mm, feed length Z-axis: 380 mm, noise level: 78 dB, HP Jet Fusion 3D 4200 – 2017 | Fully Maintained | Complete System Gods Ah Hcaopfx An Esui HP Jet Fusion 3D 4200 industrial 3D printing system, manufactured in 2017. The machine has been fully maintained by HP . Last print was run on 30th October 2026. It is still able to actively print. Manufacturer: HP Model: Jet Fusion 3D 4200 Manufactured: 2017 Technology: HP Multi Jet Fusion (MJF) Condition: Used Maintenance: Fully maintained by HP Build volume: 380 × 284 × 380 mm Layer thickness: 80 microns Included: HP Processing Station Build Units: 2 × HP Jet Fusion 3D Build Units Printer can be viewed. Location: Available for inspection by appointment. System Includes HP Jet Fusion 3D 4200 Printer HP Processing Station with fast cool. 2 × Build Units 7 x 220L drums of PA12-HR (clean reusable powder feed stock) 1 x Spare Steel 220L Drum to suit Processing Station 1 x Pack of various consumables (print heads,fusing agents, detailing agents, fusing lamps, wiper blades, filters, cleaning rolls) Sold ex-works. The printer and associated equipment are sold from their current location. The buyer is solely responsible for dismantling, removal, loading, transportation, shipping and installation at the destination. The buyer is also responsible for arranging any specialist lifting, transport or installation requirements. Buyers are strongly encouraged to inspect the equipment and assess access, lifting and transportation requirements before purchase. The HP service contract is active until 30/1/2027. The buyer will need to arrange a new service contract and recertification with HP on relocation. That cost is not included in our price. Sand Blaster Cabinet and ATEX Vacuum also available to purchase separately - please ask for details

Condition: used, functionality: fully functional, Year of construction: 2018, Printer was used at research centre but last 5 year after the printer was repaired , there was changed printing head in 2021 Gedpfs Ah E Nrox An Eoui and since there the printer was not used much

Condition: used, functionality: unexamined, Year of construction: 2018, operating hours: 1,270 h, Printer was relocalised to different production plant but was never again installed in new location and new production director Guedpfj Ah Edgjx An Eei prefare different 3D printing technology - HP.

Condition: used, functionality: fully functional, machine/vehicle number: 3-1-01699-02-37 (5LM37), Year of construction: 2015, operating hours: 46,537 h, type of input current: three-phase, input voltage: 400 V, input current: 16 A, laser power: 10,000 W, feed length X-axis: 275 mm, feed length Y-axis: 275 mm, feed length Z-axis: 420 mm, power: 10 kW (13.60 HP), We are offering a used 3D Systems ProX 350 3D printer, manufactured in 2015. Type: ProX 350 Manufacturer: 3D Systems Year of manufacture: 2015 Gujdpfx Ae Ahyw Tsn Eei DMLS (Laser Beam PBF) - Powder 3D Printing Technology. Materials: Metal (used Titanium) - Ceramic Electrical supply: 3 × 400 V AC + N + PE Frequency: 50–60 Hz Rated current: 16 A Power: 10 kW Rated short-circuit current: 6 kA Serial number: 3-1-01699-02-37 Compliance: 21 CFR 1040.10 and 1040.11 Machine sold complete with the following components: -Powder feeding unit -External filter -Vacuum pump -Blower -Recycling unit -Chiller If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 199 h, type of input current: AC, input voltage: 240 V, input frequency: 50 Hz, electrical fuse: 10 A, Very good condition with original equipment and tools. Only 200 print hours. Gedpfx As Ahyt Tjn Esui

Condition: used, functionality: fully functional, machine/vehicle number: 200123013-09, Year of construction: 2018, type of input current: three-phase, overall weight: 1,360 kg, input voltage: 208 V, input frequency: 50 Hz, laser power: 10,000 W, feed length X-axis: 381 mm, feed length Y-axis: 330 mm, feed length Z-axis: 457 mm, We offer a used 3D Systems PROX 500 3D printer, model ProX 500 (132540-00 Rev A), designed for polymers, manufactured in 201. Manufacturer: 3D Systems, Inc. Model: ProX 500 Materials: Polymers Serial Number: 200123013-09 Electrical Supply: 208 V AC, three-phase, 50/60 Hz Apparent Power: 10 kVA Weight: 1360 kg Short-circuit interrupting current: 200 kA Electrical Diagram Number: 132508-00 Laser Class: Class 1 laser product; Class 4 laser inside Guodpj Ahq I Refx An Eji Included option: ProX MQC (2017) S/N 20052303004 Donalson Torit DCE If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: repair required (used), functionality: not functional, machine/vehicle number: 125-00100(L0449), Year of construction: 2015, operating hours: 12,259 h, input voltage: 230 V, input frequency: 50 Hz, laser power: 5,000 W, electrical fuse: 21 A, feed length X-axis: 914 mm, feed length Y-axis: 609 mm, feed length Z-axis: 914 mm, We are offering for sale an industrial Stratasys Fortus 900mc (900mc V0-A-Classic) 3D printer, manufactured in 2015. The machine is sold as is, and requires some work to be put back into service. Technical specifications: Manufacturer: Stratasys Model: Fortus 900mc (900mc V0-A-Classic) Year of manufacture: 2015 Print head: P5-1 Technology: 3D printing by fused deposition modeling (FDM) Condition: Requires repair Compatible thermoplastic materials: ABS-M30 ULTEM 1010 Gedpfx As Ahp A Hjn Eoui ULTEM 1010 CG ULTEM 9085 ULTEM BLACK ULTEM 9085 CG To enable the machine to be put back into service, the following work is required: Replacement of the fan. Replacement of the loading bay. The estimated cost of the repairs is approximately €10,000. Additional information: This machine represents an opportunity for an industrial company or a 3D printing specialist wishing to acquire a Stratasys Fortus 900mc that needs to be refurbished. For any questions, requests for additional information, or to arrange a visit, please do not hesitate to contact us by message or by phone.

Condition: good (used), functionality: not functional, machine/vehicle number: 155-11000 (K10170), Year of construction: 2017, operating hours: 3,000 h, input voltage: 208 V, input current: 18 A, input frequency: 50 Hz, laser power: 5,000 W, Industrial 3D printer – Stratasys Fortus 450mc Technology: additive manufacturing via fused deposition modeling (FDM). Year of manufacture: 2017. Compatible materials (thermoplastics): ABS-ESD7 ABS-M30 / M30i ASA Nylon 12 Gjde Ahpf Hspfx An Ejui PC-ABS ISO / PC ULTEM 1010-CG ULTEM 9085-CG Overall condition and technical information: Machine is functional at approximately 90%. Reconditioning of the spool supports is required. Software version: 6.2.6624.0. Print head number: P2-1. Industrial machine designed for the production of prototype parts, functional parts, and small production runs in technical thermoplastic materials.

Condition: used, Year of construction: 2014, Printing technology: FDM: build process using molten plastic Build volume X × Y × Z: 254 × 254 × 305 mm Layer thicknesses: 0.178 / 0.254 / 0.330 mm Model material: ABSplus P430 Support material: SR-30, soluble support material Material supply: Separate cartridges for model and support material Cartridge capacity: Approximately 922 cm³ per cartridge Network connection: Ethernet RJ45 Software: Stratasys Insight for print preparation Power supply (as per nameplate): 100–240 V, 12–6 A, 50–60 Hz Guodpfxe Ahklus An Esi Product number: 163-00500

Condition: new, functionality: fully functional, Year of construction: 2026, Industrial SLS for real production work Fuse X1 brings production-scale SLS into a compact industrial system. Its large chamber supports full-size parts and dense batches, while thermal imaging, 13 independent thermal zones and Print Intelligence help maintain stable conditions throughout the build. Large-format builds A 61.5 L chamber provides 7.5 times the build volume of Fuse 1+ 30W for full-size prototypes and dense production runs. Production throughput A 120 W fiber laser and 30%+ packing density are designed to put more parts into each build and increase weekly output. Failure prevention Print Intelligence combines computer vision with Adaptive Temperature Control to detect anomalies and protect the rest of a build. Please request current lead time and current pricing. Gsdj Agcx Rjpfx An Eoui Buy your production system from people who live and breathe SLS. IM3D is not simply a Formlabs reseller. We are an SLS specialist and service-oriented partner with the technical depth to support your system before installation, during onboarding and throughout production. SLS is our field We focus on industrial SLS systems, powders and production workflows, not a broad catalogue of unrelated desktop printers. Maintenance knowledge We know what keeps SLS equipment productive and can help with preventive maintenance, troubleshooting and practical operator guidance. SLS-trained technicians Our technical team understands the complete process, from machine setup and parameter selection to stable day-to-day production. A complete production cell We help configure the printer, powder handling, post-processing, materials and service plan around the parts you need to make.