MIX-TECH Andrzej Pliszka
MIX-TECH Andrzej Pliszka from Sorkwity
Automation service, assembly, dismantling, commissioning of machines and production lines in the woodworking industry, consulting.
MIX-TECH Andrzej Pliszka
Stama 6
11-731 Sorkwity
Poland
Województwo warmińsko-mazurskie
Current offers from similar dealers
Listing
Schloß Holte-Stukenbrock
7,720 km
Box truck
MANTGL 8.190 Koffer LBW Automatik Anhängerkupplung
MANTGL 8.190 Koffer LBW Automatik Anhängerkupplung
Call
Condition: used, mileage: 141,680 km, power: 140 kW (190.35 HP), first registration: 05/2023, fuel type: diesel, color: white, driver cabin: other, gearing type: automatic, number of seats: 3, Please note:
Isdpfozvq Sgex Ac Eetk
Despite careful review of all our price listings, errors occasionally occur. These are sometimes caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price listing also cannot be declared as part of the contract. If you place particular emphasis on a specific feature in our advertisement, please let us know when concluding the contract. Thank you for your understanding!
Listing
Cēsis
8,170 km
Pellet press
SRE Opcon Group
SRE Opcon Group
Call
Condition: used, SPE Renergi Low Temperature Dryer.
The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
Ijdozvq Rcopfx Ac Estk
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC
The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price: 35 000 EUR (VAT is not included)
Listing
Odder
7,547 km
Construction machinery
VolvoL110G
VolvoL110G
Call
Condition: good (used), operation weight: 21,000 kg, lifting height: 3,940 mm, Year of construction: 2011, total length: 8,610 mm, total width: 2,980 mm, load capacity: 11,800 kg, machine/vehicle number: 3661, additional equipment features: Rear mud guards, Weight system, Warning triangle, Centralized greasing system, Front mud guards, Equipment: lighting, Volvo L110G from Uniktruck
Itsdpfxozvq Nfo Ac Esk
Listing
Roosendaal
7,500 km
Standard tractor
ScaniaR 730 V8 + TREKKER/KIPPER + 6X4 + EURO 5
ScaniaR 730 V8 + TREKKER/KIPPER + 6X4 + EURO 5
Call
Condition: excellent (used), mileage: 594,894 km, power: 537 kW (730.12 HP), first registration: 11/2011, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of beds: 1, total length: 7,120 mm, total width: 2,550 mm, Year of construction: 2011, Equipment: ABS, cruise control, power mirror, trailer coupling, = Additional options and accessories =
- Air-suspended seats
- Aluminum fuel tank
- Beacon(s)
- Gullet
- High Beams
- Radio/CD player
- Sleeping cabin
- Sun visor
= More information =
General information
Number of doors: 2
Cab: single
Technical information
Number of cylinders: 8
Engine capacity: 16.350 cc
Axle configuration
Front axle: Steering
Rear axle 1: Double wheels
Rear axle 2: Double wheels
Weights
Empty weight: 11.095 kg
Carrying capacity: 18.905 kg
GVW: 30.000 kg
Max. towing weight: 66.000 kg
Functional
Extendable superstructure: Yes
Tipper: Back
Interior
Number of seats: 2
Condition
Technical condition: very good
Visual appearance: very good
Financial information
Price: On request
= Dealer information =
Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.
Prices do not include VAT.
No rights may be derived from the information provided.
Office phone number:
Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.
Mobile: Available via WhatsApp and Viber.
When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.
If in doubt, please call us so we can verify the invoice and/or payment.
Iedpfx Acezvq I Ij Eotk
Bank details:
Bank name: ING
Bank address: Bijlmerdreef 106 1102 CT Amsterdam
IBAN number: NL97INGB0117176699
EORI/VAT/TAX: NL810574901B(01)
BIC/SWIFT: INGBNL2A
Listing
Osnabrück
7,656 km
Special purpose truck
FordF-MAX Luxury Intarder,Standklima
FordF-MAX Luxury Intarder,Standklima
Call
Condition: used, mileage: 345,450 km, power: 368 kW (500.34 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 8,876 kg, maximum load weight: 9,124 kg, overall weight: 18,000 kg, wheelbase: 3,600 mm, next inspection (TÜV): 08/2027, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, cabin, central locking, compressed air brake, cruise control, electronic stability program (ESP), navigation system, parking heater, power assisted steering, Interior
* Automatic climate control
Comfort and Environment
* Auxiliary heater
* Cruise control
Other
* Emission standard Euro 6, Green environmental badge
* Exterior color: Metallic: BLUE LIGHTNING
* Bluetooth hands-free system
* Ford F-Max Luxury Pack (LUX)
* Air suspension on rear axle
* Hydraulic retarder
* Navigation system with map display
* Winter package/J: Heated windshield
Other:
* Nationwide delivery for €399 net plus VAT (€474.81 including VAT)
* For all vans: Optionally, a 12 or 24-month Mercedes-Benz used car warranty is available.
* We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price.
* Leasing/financing through Mercedes-Benz Bank. We will be happy to prepare an offer for you.
Itsdszvq Iujpfx Ac Eek
* No liability for printing and typographical errors
* Subject to errors and prior sale
Listing
Osnabrück
7,656 km
Double cab van
Mercedes-BenzSprinter 217 CDI DOKA Pritsche Klima, AHK, MBUX
Mercedes-BenzSprinter 217 CDI DOKA Pritsche Klima, AHK, MBUX
Call
Condition: used, mileage: 81,684 km, power: 125 kW (169.95 HP), first registration: 04/2021, fuel type: diesel, empty load weight: 2,349 kg, maximum load weight: 841 kg, overall weight: 3,190 kg, wheelbase: 3,665 mm, next inspection (TÜV): 08/2028, fuel: diesel, energy efficiency: B, CO₂ emissions: 195 g/km, fuel consumption (urban): 8.2 l/100km, fuel consumption (extra-urban): 7 l/100km, fuel consumption (combined): 7.4 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, cabin, central locking, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, soot filter, trailer coupling, Exterior
* Trailer hitch, fixed ball head
* Heated and electrically adjustable exterior mirrors
* Wheelbase 3665 mm
* Roof rack behind the cab
* All-season tires
* Spare wheel
Interior
* Outside temperature display
* Artico black imitation leather
* Armrest for driver's seat
* Adjustable passenger seat
Safety
* Adaptive brake light
* Airbag, driver
Comfort and Environment
* Hill-start assist
* ECO start-stop function
* Headlamp assistant
* Gear shift indicator
* Crosswind assist
* Mercedes-Benz emergency call system
* Multifunction steering wheel
* Cruise control can be retrofitted
* Reinforced shock absorbers
Multimedia
* Digital radio (DAB) with Bluetooth hands-free system
Condition/Documents
* COC papers
Other
* 3.0-ton vehicle
* 6-speed manual gearbox ECO Gear
* Storage compartment above the windshield
* Storage compartment under the cockpit
* Trailer load up to 3,450 KG possible
* Trailer socket, 13-pin
* Armrest for passenger seat
* Can be uprated to 3,450 KG gross vehicle weight, resulting in an increased payload of 260 KG
* Cup holders, front
* Emissions class Euro 6d-TEMP
* Suspension for comfort and cargo protection
* Mis-fueling protection
* Generator 14 V / 250 A
* Weight variant 3,190 kg
* Seat belt warning system for driver's seat
* Semi-automatic TEMPMATIC climate control system
* Hydraulic jack
* Clothes hook in the passenger compartment
* Communication module (LTE) for digital services
* Steering wheel adjustable for tilt and height
* MBUX multimedia system with 7-inch touchscreen
* OM 654 DE 20 LA 125 kW (170 hp) 3800/min
* Platform with aluminum side panels
* Signs/printed material, German
* Side marker lights
* Driver's seat occupancy detection
* Jump start terminals
* Underrun protection, EG
* USB socket 5 V
* First-aid kit
* Fleece battery 12 V 92 Ah
* Warning triangle
Itodpfozvq Injx Ac Eek
* Heat-insulating glass all around
* Vehicle registration certificate, Part II
* Axle ratio i = 3.923
Other:
* Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT).
* For all vans: On request, 12 or 24 months of Mercedes-Benz used car warranty is possible.
* We will gladly take back your current vehicle, offset it against the new vehicle, or pay you the purchase price.
* Leasing/financing via Mercedes-Benz Bank. We will be happy to prepare an offer for you.
* Ex-rental vehicle
* No liability for printing and typographical errors
* Errors and prior sale excepted.
Listing
Osnabrück
7,656 km
Double cab van
Mercedes-BenzSprinter 217 CDI DOKA Pritsche Klima, AHK, MBUX
Mercedes-BenzSprinter 217 CDI DOKA Pritsche Klima, AHK, MBUX
Call
Condition: used, mileage: 81,684 km, power: 125 kW (169.95 HP), first registration: 04/2021, fuel type: diesel, empty load weight: 2,349 kg, maximum load weight: 841 kg, overall weight: 3,190 kg, wheelbase: 3,665 mm, next inspection (TÜV): 08/2028, fuel: diesel, energy efficiency: B, CO₂ emissions: 195 g/km, fuel consumption (urban): 8.2 l/100km, fuel consumption (extra-urban): 7 l/100km, fuel consumption (combined): 7.4 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, cabin, central locking, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, soot filter, trailer coupling, Exterior
* Trailer coupling, fixed ball head
* Heated and electrically adjustable exterior mirrors
* Wheelbase 3665 mm
* Roof rack behind the cab
* All-season tires
* Spare wheel
Interior
* Outside temperature display
* Black Artico leatherette
* Armrest for driver's seat
* Adjustable passenger seat
Safety
* Adaptive brake light
* Driver airbag
Comfort and Environment
* Hill-start assist
* ECO start-stop function
* Headlight assistant
* Gearshift indicator
* Crosswind assist
* Mercedes-Benz emergency call system
* Multifunction steering wheel
* Cruise control can be retrofitted
* Reinforced shock absorbers
Multimedia
* Digital radio (DAB) with Bluetooth hands-free system
Condition/Documents
* Certificate of Conformity (COC)
Other
* 3.0-ton vehicle
* 6-speed manual gearbox ECO Gear
* Storage compartment above the windshield
* Storage compartment under the dashboard
* Towing capacity up to 3,450 kg possible
* Trailer socket, 13-pin
* Armrest for passenger seat
* Can be upgraded to 3,450 kg gross vehicle weight, increasing the payload by 260 kg
* Cup holder in the front
* Emission class Euro 6d-TEMP
* Suspension for comfort and cargo protection
* Mis-fueling prevention
* Generator 14 V / 250 A
* Weight variant 3,190 kg
* Seatbelt warning system for driver's seat
* Semi-automatic TEMPMATIC climate control system
* Hydraulic jack
* Clothes hook in the passenger compartment
* Communication module (LTE) for digital services
* Steering wheel adjustable in height and tilt
* MBUX multimedia system with 7-inch touchscreen
* OM 654 DE 20 LA 125 kW (170 hp) 3800/min
* Platform with aluminum side panels
* Signage / Printed materials in German
* Side marker lights
* Driver's seat occupancy detection
* Jump start connection
* Underrun protection (EU standard)
* USB socket 5 V
* First-aid kit
* Fleece battery 12 V 92 Ah
* Warning triangle
* Heat-insulating glass all around
* Vehicle registration certificate, part II
* Axle ratio i = 3.923
Other:
* Nationwide delivery for €399 net plus VAT (474.81 € incl. VAT).
* For all vans: On request, 12 or 24 months Mercedes-Benz used car warranty is possible.
* We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price.
* Leasing / financing via Mercedes-Benz Bank. We will gladly prepare an offer for you.
* Former rental vehicle
* No liability for printing and typographical errors
Itedpfxjzvq Ihe Ac Eok
* Subject to errors and prior sale.
Listing
Osnabrück
7,656 km
Pick-up van
Mercedes-BenzSprinter 217 CDI DOKA Pritsche Klima, AHK, MBUX
Mercedes-BenzSprinter 217 CDI DOKA Pritsche Klima, AHK, MBUX
Call
Condition: used, mileage: 81,684 km, power: 125 kW (169.95 HP), first registration: 04/2021, fuel type: diesel, empty load weight: 2,349 kg, maximum load weight: 841 kg, overall weight: 3,190 kg, wheelbase: 3,665 mm, next inspection (TÜV): 08/2028, fuel: diesel, energy efficiency: B, CO₂ emissions: 195 g/km, fuel consumption (urban): 8.2 l/100km, fuel consumption (extra-urban): 7 l/100km, fuel consumption (combined): 7.4 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, cabin, central locking, electronic stability program (ESP), power assisted steering, second-hand vehicle warranty, soot filter, trailer coupling, Exterior
* Fixed ball-type trailer hitch
* Heated and electrically adjustable exterior mirrors
* Wheelbase 3665 mm
* Ladder rack behind the cab
* All-season tires
* Spare wheel
Interior
Itsdpfszvq Ibsx Ac Eek
* Outside temperature display
* Black Artico leather-look upholstery
* Armrest for driver's seat
* Adjustable passenger seat
Safety
* Adaptive brake light
* Driver airbag
Comfort and Environment
* Hill-start assist
* ECO start-stop function
* Headlamp assistant
* Gear shift indicator
* Crosswind assist
* Mercedes-Benz emergency call system
* Multifunction steering wheel
* Cruise control can be retrofitted
* Reinforced shock absorbers
Multimedia
* Digital radio (DAB) with Bluetooth hands-free system
Condition/Documents
* COC documents
Other
* 3.0-tonne vehicle
* 6-speed manual transmission ECO Gear
* Storage compartment above the windshield
* Storage compartment under the dashboard
* Trailer load up to 3,450 kg possible
* 13-pin trailer socket
* Armrest for passenger seat
* Can be upgraded to 3,450 kg gross vehicle weight, increasing payload by 260 kg
* Cup holders in front
* Emission class Euro 6d-TEMP
* Suspension for comfort and cargo protection
* Anti-misfueling protection
* Generator 14 V / 250 A
* Weight variant 3,190 kg
* Seatbelt warning system for driver's seat
* Semi-automatic TEMPMATIC air conditioning
* Hydraulic jack
* Coat hooks in the passenger compartment
* Communication module (LTE) for digital services
* Steering wheel adjustable for tilt and height
* MBUX multimedia system with 7-inch touchscreen
* OM 654 DE 20 LA 125 kW (170 hp) 3800/min
* Platform body with aluminum side panels
* Signage / printed materials in German
* Side marker lights
* Driver seat occupancy detection
* Jump start connection
* Underrun protection (EC)
* USB socket 5 V
* First aid kit
* Fleece battery 12 V 92 Ah
* Warning triangle
* Heat-insulating glass all around
* Vehicle registration certificate, Part II
* Axle ratio i = 3.923
Other:
* Nationwide delivery for €399 net plus VAT (€474.81 incl. VAT).
* For all vans: On request, 12 or 24 months of Mercedes-Benz used car warranty is possible.
* We will gladly take back your current vehicle, offset it against the new vehicle or pay you the purchase price.
* Leasing / Financing through Mercedes-Benz Bank. We will gladly prepare an offer for you.
* Ex-rental vehicle
* No liability for printing and typographical errors
* Subject to errors and prior sale.
Listing
Osnabrück
7,656 km
Standard tractor unit
FordF-MAX Luxury Intarder,Standklima
FordF-MAX Luxury Intarder,Standklima
Call
Condition: used, mileage: 345,450 km, power: 368 kW (500.34 HP), first registration: 04/2022, fuel type: diesel, empty load weight: 8,876 kg, maximum load weight: 9,124 kg, overall weight: 18,000 kg, wheelbase: 3,600 mm, next inspection (TÜV): 08/2027, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of seats: 2, Equipment: ABS, air conditioning, airbag, cabin, central locking, compressed air brake, cruise control, electronic stability program (ESP), navigation system, parking heater, power assisted steering, Interior
* Automatic climate control
Comfort and Environment
* Auxiliary heater
* Cruise control
Other
* Emission standard Euro 6, green environmental badge
* Exterior color: metallic, BLUE LIGHTNING
* Bluetooth hands-free system
* Ford F-Max Luxury Pack (LUX)
* Air suspension on rear axle
* Hydraulic retarder
* Navigation system with map display
Itedpfx Acszvq Izs Eok
* Winter package/J: Heated windshield
Other:
* Nationwide delivery for €399 net plus VAT (€474.81 including VAT).
* For all vans: 12 or 24 months of Mercedes-Benz used car warranty can be provided upon request.
* We will gladly take your current vehicle in trade, offset it against the new vehicle, or pay you the purchase price.
* Leasing/financing via Mercedes-Benz Bank. We will gladly prepare an offer for you.
* No liability for printing and typographical errors.
* Errors and prior sale reserved.
Listing
Bovenden
7,813 km
Tipper truck
Mercedes-BenzArocs 1832 K 4x2, Fassi Kran 120.B.1.23, 9.75m
Mercedes-BenzArocs 1832 K 4x2, Fassi Kran 120.B.1.23, 9.75m
Call
Condition: used, mileage: 149,100 km, power: 235 kW (319.51 HP), first registration: 04/2017, fuel type: diesel, empty load weight: 9,965 kg, maximum load weight: 8,035 kg, overall weight: 18,000 kg, tire size: 385/65/315/80 R 22,5, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, cabin, crane, differential lock, trailer coupling, Vehicle location: en route / in transit, Mercedes PowerShift 3, steel body, short cab, air suspension seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, ABS (anti-lock braking system), differential lock, leaf spring suspension, air/light/hydraulic trailer hitch, lashing rails, rotating beacon, crane behind cab, emergency stop, grab control, 2-point mechanical support, 3x hydraulic outriggers, green environmental badge.
Isdpozvq Hwefx Ac Ejtk
Wheelbase: 3900 mm, Body: Meiller 3-way tipper, Fassi loading crane 120B.1.23, foldable, 9.75m - 995kg, steel side boards foldable and pivoting, spring-assisted front and rear disc brakes, load chart: 2.40m - 4,175kg, 3.90m - 2,645kg, 5.75m - 1,745kg, 7.70m - 1,270kg, 9.75m - 975 kg, mechanically possible up to 16 m - 495 kg, data subject to change as the vehicle is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!
Listing
Bovenden
7,813 km
Roll-off tipper truck
Mercedes-BenzActros 2645 L 6x4, Meiller RS21-70, Funk
Mercedes-BenzActros 2645 L 6x4, Meiller RS21-70, Funk
Call
Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, empty load weight: 11,583 kg, maximum load weight: 14,417 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 4,600 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, air conditioning, cabin, central locking, traction control, Vehicle location: in transit, ClassicSpace, Mercedes PowerShift 3, body from Mtlg. Haus, 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, telephone, ABS (anti-lock braking system), traction control (ASR), constant throttle, leaf-air suspension, central locking, green environmental badge.
Wheelbase: 4600 mm, body: Meiller RS21-70 roll-off system for containers up to 7m, with remote control, DISC BRAKES ON FRONT AND REAR AXLE, SEAT UPHOLSTERY VELOURS DRIVER AND PASSENGER SEAT, REVERSING WARNING, CABLE REMOTE CONTROL FOR AIR SUSPENSION, M CAB CLASSICSPACE, 2.30 M, TUNNEL 170 MM, COMFORT LOCKING SYSTEM WITH CENTRAL LOCKING, LIGHT SENSOR, RAIN SENSOR, DRIVING PROGRAM ECONOMY/POWER, TRANSMISSION G 281-12/14.93-1.0, MERCEDES POWERSHIFT 3, MULTIMEDIA COCKPIT, INTERACTIVE, TRUCK DATA CENTER 8, TANK 290 L, LEFT, 650 X 565 X 950 MM, ALUMINUM, ENGINE OM471, R6, 12.8 L, 330 KW (449 HP), 2200 NM, EURO VI, E, INTERIOR COLOR GREIGE/ANTHRACITE, ENGINE DRIVE REAR, C, HYDRAULIC PUMP ISO 7653D, AUXILIARY DRIVE, NMV OR ENGINE REAR, ESP, LANE KEEPING ASSIST, ATTENTION ASSIST, TRAFFIC SIGN RECOGNITION, TIRE PRESSURE MONITORING, ACTIVE BRAKE ASSIST 6, ACTIVE SIDEGUARD ASSIST 2, FRONTGUARD ASSIST, SENSOR POSITION, SIDE RADAR, WIDENED, MULTIFUNCTIONAL STEERING WHEEL.
New vehicle from stock, with registration date 08/2026! No guarantee for accessory information, subject to changes, prior sale and errors!
Ijdpfszvq H Rox Ac Eotk
Listing
Bovenden
7,813 km
Roll-off tipper truck
Mercedes-BenzAntos 2636 L 6x4 VDL S 21-550 Abrollanlage
Mercedes-BenzAntos 2636 L 6x4 VDL S 21-550 Abrollanlage
Call
Condition: used, mileage: 275,000 km, power: 265 kW (360.30 HP), first registration: 12/2016, fuel type: diesel, empty load weight: 11,650 kg, maximum load weight: 14,350 kg, overall weight: 26,000 kg, tire size: 385/55/315/70 R 22,5, axle configuration: 6x4, wheelbase: 4,000 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 5,500 mm, Equipment: ABS, air conditioning, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, trailer coupling, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio/CD, ABS (anti-lock braking system), lifting and lowering mechanism, differential lock, leaf-air suspension, trailer hitch with air, light, and hydraulic connections, U-shaped protection, hydraulically adjustable, DIN locking mechanism, green environmental badge.
Wheelbase: 4000 mm, Body: with VDL S 21-550 roll-off system up to 5,500 mm, container 9 tons, front axle; container available at an additional cost, disc brakes on front and rear axles, data subject to change as it is currently in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!
Itodpozvq H Djfx Ac Eok
Listing
Roosendaal
7,500 km
Tipper
ScaniaR 730 V8 + TREKKER/KIPPER + 6X4 + EURO 5
ScaniaR 730 V8 + TREKKER/KIPPER + 6X4 + EURO 5
Call
Condition: excellent (used), mileage: 594,894 km, power: 537 kW (730.12 HP), first registration: 11/2011, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 7,120 mm, total width: 2,550 mm, Year of construction: 2011, Equipment: ABS, cruise control, power mirror, trailer coupling, = Additional options and accessories =
- Air-suspended seats
- Aluminum fuel tank
- Beacon(s)
- Gullet
- High Beams
- Radio/CD player
- Sleeping cabin
- Sun visor
= More information =
General information
Number of doors: 2
Cab: single
Technical information
Number of cylinders: 8
Engine capacity: 16.350 cc
Axle configuration
Front axle: Steering
Rear axle 1: Double wheels
Rear axle 2: Double wheels
Weights
Empty weight: 11.095 kg
Carrying capacity: 18.905 kg
GVW: 30.000 kg
Max. towing weight: 66.000 kg
Functional
Extendable superstructure: Yes
Tipper: Back
Layout
Number of beds: 1
Condition
Technical condition: very good
Isdjzvq Hqopfx Ac Eotk
Visual appearance: very good
Financial information
Price: On request
= Dealer information =
Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.
Prices do not include VAT.
No rights may be derived from the information provided.
Office phone number:
Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.
Mobile: Available via WhatsApp and Viber.
When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.
If in doubt, please call us so we can verify the invoice and/or payment.
Bank details:
Bank name: ING
Bank address: Bijlmerdreef 106 1102 CT Amsterdam
IBAN number: NL97INGB0117176699
EORI/VAT/TAX: NL810574901B(01)
BIC/SWIFT: INGBNL2A
Listing
Roosendaal
7,500 km
Hook arm system
Mercedes-BenzActros 2536 + FASSI F130 A - 2X EXT. + 6X2 + HA...
Mercedes-BenzActros 2536 + FASSI F130 A - 2X EXT. + 6X2 + HA...
Call
Condition: excellent (used), mileage: 525,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Year of construction: 2004, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories =
- Lift Axle
- Radio/CD player
- Steering Axle
= Remarks =
Crane
Number of hydraulic extensions: 2
Number of support legs: 2
Load Hook: ×
Meter capacity: 8 m
Capacity kilo: 5580 kg
= More information =
General information
Number of doors: 2
Cab: single
Registration number: 1RNL674
Axle configuration
Front axle: Steering
Rear axle 1: Double wheels
Rear axle 2: Lift axle; Steering
Weights
Empty weight: 12.760 kg
Carrying capacity: 13.240 kg
GVW: 26.000 kg
Functional
Crane: FASSI F 130 A, behind the cab
Extendable superstructure: Yes
Condition
Technical condition: very good
Visual appearance: very good
Financial information
Price: On request
= Dealer information =
Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.
Prices do not include VAT.
No rights may be derived from the information provided.
Office phone number:
Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.
Mobile: Available via WhatsApp and Viber.
When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.
If in doubt, please call us so we can verify the invoice and/or payment.
Bank details:
Bank name: ING
Bank address: Bijlmerdreef 106 1102 CT Amsterdam
IBAN number: NL97INGB0117176699
EORI/VAT/TAX: NL810574901B(01)
BIC/SWIFT: INGBNL2A
Itjdpfx Acozvq E Ts Esk
Listing
Gerolzhofen
7,947 km
Spindle moulders with tiltable spindle
KÖLLEF 45
KÖLLEF 45
Call
Condition: used, GS-tested
Milling stop with fine adjustment / handwheel adjustment
Individual chuck adjustment
Machine cleaned, partially overhauled,
Test run, lubricated,
Spindle runout top accuracy, max. 3/100 mm
Used
Manufacturer: Kölle
Type: F 45
Machine No.: 889/E
Motor: 4.7 / 5.7 kW
Isdpfx Aezvq E Hsc Ejtk
Swiveling from -5° to +45°
Motorized brake
Speed stages: 3000/4000/5000/6000/8000/10,000 rpm
Right-left rotation
Table size: 1200 mm x 1000 mm
Milling arbor diameter: 30 mm
Milling stop with fine adjustment
Socket for feed device: 1 x 16 A
Extraction connection: D 2 x 120 mm
Space requirement: approx. 1200 mm x 1000 mm x 1300 mm
Weight: approx. 1000 kg
Storage location: 97447 Gerolzhofen, free loading, unpacked
Handover in the current condition as inspected,
without warranty and guarantee
Listing
Bretzfeld
7,940 km
Edge banding machine
HOLZ-HERAURIGA 1304
HOLZ-HERAURIGA 1304
Call
Condition: good (used), Year of construction: 2009, 0,4-6 mm
Workingpiece thickness from to 6-60 mm
Total length 3516 mm
Feed speed 10 m/min.
Isdjzvq Eyopfx Ac Ejtk
Weight 850 kg
Listing
Niederlangen
7,585 km
Plate Shear - Hydraulic
DURMAVS 6006
DURMAVS 6006
Call
Condition: used, Year of construction: 2019, sheet width 6080 mm
Itjdpozvq Etofx Ac Eok
plate thickness 6.0 mm
rear stop 1000 mm
cutting angle 0.5 - 2.0 °
down holder 29 Stk
no. of strokes ca. 10 Hub/min
total power requirement 22.0 kW
dimensions of the machine ca. 7300 x 2150 x 2750 mm
weight 25500 kg
Current list price: approx. 150.000 euros
Features:
- Electro-hydraulic, slide-guided sheet metal shear
- Electro-hydraulic cutting angle adjustment
- Electro-hydraulic cutting gap adjustment
- Electrically driven backgauge with ball screws
- Manual central lubrication
- Cut line illumination
- Ball bearings in the table
- Fold-up finger guard, 1.000 mm
- Side stop with T-slots, tilting stop, and scale
- 5 support arms with T-slots
- Photoelectric sensors on the rear of the machine
- 1 freely movable foot switch
Includes optional equipment:
- Pneumatic sheet metal holding device
Listing
Niederlangen
7,581 km
Clamping Table
SIEGMUNDRETRO - 3000 x 1500 - 28
SIEGMUNDRETRO - 3000 x 1500 - 28
Call
Condition: new, table length 3000 mm
table width 1500 mm
table height (lateral area) 200 mm
weight 1549 kg
dimensions of the machine ca. 3000 x 1500 mm
SIEGMUND Authorized Dealer - All Items in Stock!
!! SPECIAL OFFER !!
SIEGMUND Retro Welding Table
3000x1500x200, accessories included
SIEGMUND welding table just like 25 years ago
with plasma nitriding and modern table legs
Product Description
- Table dimensions: 3000x1500x200 mm
Iedpfxezvq Eme Ac Ejtk
- High-quality S355J2 N steel with plasma nitriding
- Material thickness: approx. 24.5-27 mm
- Hole diameter: 28 mm
- Holes arranged in a 100x100 mm grid
- Corners, edges, and holes chamfered at 45°
- Side panel height: 200 mm
- Holes in side panels arranged in a diagonal grid
- Construction reinforced with ribs
Plasma-nitrided version:
- Protection against rust, scratches, and weld spatter adhesion
- Corrosion-resistant / higher load-bearing capacity
Specifications:
- 28-hole pattern / Dimensions: 3000 x 1500 x 200 mm
- Plasma-nitrided version
- Includes 6x base feet (standard configuration)
- Includes accessory set (see Figure 3):
* 8x 280626.N
* 12x 280511
* 6x 280410.N
* 2x 280420.N
* 2x 280422.N
* 4x 280110.N
* 2x 280152.N
* 1x 283999
Listing
Roosendaal
7,500 km
Crane
Mercedes-BenzActros 2536 + FASSI F130 A - 2X EXT. + 6X2 + HA...
Mercedes-BenzActros 2536 + FASSI F130 A - 2X EXT. + 6X2 + HA...
Call
Condition: excellent (used), mileage: 525,445 km, power: 265 kW (360.30 HP), first registration: 10/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro3, number of seats: 2, total length: 9,190 mm, Year of construction: 2004, Equipment: ABS, crane, electric window regulation, retarder, = Additional options and accessories =
- Lift Axle
- Radio/CD player
- Steering Axle
= Remarks =
Crane
Number of hydraulic extensions: 2
Number of support legs: 2
Load Hook: ×
Meter capacity: 8 m
Capacity kilo: 5580 kg
= More information =
General information
Number of doors: 2
Cab: single
Registration number: 1RNL674
Axle configuration
Front axle: Steering
Rear axle 1: Double wheels
Rear axle 2: Lift axle; Steering
Weights
Iodpszvq Egsfx Ac Eetk
Empty weight: 12.760 kg
Carrying capacity: 13.240 kg
GVW: 26.000 kg
Functional
Crane: FASSI F 130 A, behind the cab
Extendable superstructure: Yes
Condition
Technical condition: very good
Visual appearance: very good
Financial information
Price: On request
= Dealer information =
Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.
Prices do not include VAT.
No rights may be derived from the information provided.
Office phone number:
Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.
Mobile: Available via WhatsApp and Viber.
When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.
If in doubt, please call us so we can verify the invoice and/or payment.
Bank details:
Bank name: ING
Bank address: Bijlmerdreef 106 1102 CT Amsterdam
IBAN number: NL97INGB0117176699
EORI/VAT/TAX: NL810574901B(01)
BIC/SWIFT: INGBNL2A
Listing
Günzburg
8,038 km
Hydr. pressbrake
DENERPX 60320
DENERPX 60320
Call
Condition: used, Year of construction: 2023, pressure 320 t
chamfer lenght 6050 mm
Itedpfszvq Eaex Ac Eok
distance between columns 5100 mm
stroke 350 mm
dayligth 650 mm
total power requirement 30 kW
weight of the machine ca. 22.500 kg
dimensions of the machine ca. 7000x2300x3200 mm
Listing
Grüsch
8,100 km
Collating systems
HORIZONMC-8a + MC-8m
HORIZONMC-8a + MC-8m
Call
Condition: used, Year of construction: 1998, stations 16
Itsdpfszvq D Njx Ac Esk
max. speed sets 3500 /h
max. paper size 32 x 47 cm
stiching folding unit SPF-10 II
Trimmer FC-10 II
Listing
Offenbach an der Queich
7,866 km
CNC Lathe
HAASSL-30THE
HAASSL-30THE
Call
Condition: used, Year of construction: 2005, turning diameter 250 mm
turning length 700 mm
control FANUC
weight of the machine ca. 3,35 t
HAAS SL-30THE CNC Lathe – Manufactured in 2005
Technical Specifications
- Max. turning diameter: 250 mm
- Max. turning length: 700 mm
- Number of axes: 2
- X-axis travel: 287 mm
Itsdpfxozvq Dvj Ac Ejk
- Z-axis travel: 864 mm
- Spindle bore: 69 mm
- Max. spindle speed: 3,400 rpm
- Tool turret: 12-station
- Tool holder: VDI 40
- Power supply: 360–480 V, 3-phase, 50/60 Hz
- Rated power: 22 kW
- Max. connected load: 70 A
- Full-load current: 40 A
- CNC control: FANUC
Features
- 12-position tool turret
- VDI-40 tool holder
- Hydraulic chuck
- Hydraulic tailstock
- Chip conveyor
- Coolant system
- Full enclosure with safety interlock
- Suitable for single-part and series production
- Technical documentation
Listing
Offenbach an der Queich
7,866 km
Lathe - cycle-controlled
DOOSANPuma TL 2500 LM
DOOSANPuma TL 2500 LM
Call
Condition: good (used), Year of construction: 2009, control FANUC 18i-TB Control
x-axis 0 mm
z-axis 0 mm
spindle taper 0
number of spindle speeds 0
engine output 0 kW
weight of the machine ca. 8.200 kg
dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m
DOOSAN PUMA TL 2500LM with IFS extraction system, multi-turret turning centres
for
shaft machining
The PUMA TL series stands out thanks to its innovative design, featuring both
Ijdozvq Dpopfx Ac Ejtk
upper and lower turrets. This advanced configuration makes it the ideal choice
for the demanding machining of shafts, such as camshafts and crankshafts.
Thanks to the capability for simultaneous 4-axis machining, complex machining
processes can be carried out precisely, efficiently and in a single operation.
--> Technical Specifications Mains connection: AC 200/220 V, 3-phase with earth, 50/60 Hz
--> Rated power: 52.33 kVA
--> Max. connected load: 22.0 kW
--> Full-load current: 137.33 A
--> Short-circuit current: 33.0 kA
--> Max. turning diameter: 350 mm
--> Max. turning length: 700 mm
--> Spindle bore: 76 mm
--> Main spindle: Integrated motorised spindle drive with oil cooling
--> Tool holder: VDI 40
--> Number of turrets: 2
--> Tool stations: 20 (12 upper / 8 lower)
--> Tailstock: Hydraulic
--> Lubrication: Automatic centralised lubrication
--> Coolant system: Separate coolant tank, 210 litres
--> Machine bed: Meehanite cast iron bed with hardened box-type slideways
--> Chuck: Hydraulic chuck Manufacturer: SCHUNK
--> Type: ROTA NC 315-86
--> ID No. > Design: 3-jaw wedge-hook power chuck
--> Chuck diameter: 315 mm
--> Through-bore: 86 mm
--> Piston stroke: 25 mm
--> Stroke per jaw: 5.8 mm
--> Max. clamping force: 155 kN
--> Max. actuating force: 58 kN
--> Max. speed: 3,500 min?¹
--> Jaw pitch: 1/16" × 90°
Listing
Offenbach an der Queich
7,866 km
CNC Lathe
HAASSL-20THE
HAASSL-20THE
Call
Condition: used, Year of construction: 2007, turning diameter 250 mm
turning length 500 mm
control FANUC
Itedpfx Acszvq Dis Eok
tool taper VDI 40
weight of the machine ca. 3,0 t
HAAS SL-20THE CNC Lathe – Year 2007
Technical specifications
- Max. turning length: 500 mm
- Max. turning diameter: 250 mm
- Swing over bed: 584.2 mm
- Swing over cross slide: 241.3 mm
- Distance between centers: approx. 609.6 mm
- X-axis travel: 214.6 mm
- Z-axis travel: 508 mm
- Spindle nose: A2-6
- Spindle bore: approx. 76.2 mm
- Max. spindle speed: 4,000 rpm
- Spindle motor power: 14.9 kW / 20 HP
- Driven/live tool stations: up to 10
- Input voltage: 360–480 V
- Power supply: 3-phase
Listing
Bremen
7,656 km
Band Saw - Vertical
MössnerSSF/ 801
MössnerSSF/ 801
Call
Condition: used, Year of construction: 1972, workpiece height 670 mm |
throat 785 mm
roll diameter 800 mm
cutting speed 26- 2000 m/min
dimensions of saw-band 6500 mm
power requirement 11 kW
table-size 900 x 900 mm
range L-W-H 2,24 x 1,1 x 2,9 mm
weight of the machine ca. 2,3 t
Machine from a university. Very good condition
Equipment:
Itodpfxozvq A Ss Ac Ejk
- welding station
- grinding stones

































































































































































































































































