Baumaxi

Condition: used, functionality: fully functional, mileage: 446,350 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Pgodpfozhm Tdjx Abzsn Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 9 mm Front right - 9 mm Rear left inner - 10 mm Rear left outer - 10 mm Rear right inner - 10 mm Rear right outer - 10 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 2,537 h, lifting height: 43,150 mm, lifting power: 272 kg/m, empty load weight: 20,262 kg, fuel type: diesel,

Condition: used, Year of construction: 2019,

Condition: used, Year of construction: 2010, We offer a used FUJI FW3710 Wrapper VI a horizontal packaging machine of the Horizontal Form Fill-Seal / HFFS type, designed for automatic packing of products in film. The machine is suitable for production plants that require an efficient and repeatable system for individual product packaging. An HFFS machine forms the package from a roll of film, feeds the product, seals the package and cuts off the finished pack. This type of solution is commonly used for packing food products, portioned products, ready-made goods and various items requiring an aesthetic and sealed film package. The FUJI FW3710 Wrapper VI can be used as a standalone packaging machine or as part of a larger production line. The construction of this type of machine allows continuous industrial operation, reduction of manual work and improved repeatability of the packaging process. The FUJI packaging machine is a good solution for companies looking for a used flow-pack machine to automate the packaging of individual products. The unit can be used in the food industry, manufacturing, co-packing and production lines where fast film packaging is required. Technical data: Manufacturer: FUJI Model: FW3710 Wrapper VI Type: horizontal HFFS / flow-pack packaging machine Machine type: Horizontal Form Fill-Seal Machine Condition: used Main advantages: horizontal HFFS / flow-pack packaging system automatic forming, sealing and cutting of the package packing products in film from a roll Podpfezhm Saox Abzsgn repeatable individual packaging process can be used as a standalone machine or as part of a production line solution for packaging automation suitable for food and industrial products renowned FUJI manufacturer construction designed for industrial operation Applications: packing food products packing portioned products packing ready-made goods packing individual products flow-pack film packaging production and co-packing lines automation of the packaging process packing products requiring an aesthetic film package

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,313 h, functionality: fully functional, working width: 700 mm, area performance: 4,800 m²/h, overall weight: 716 kg, warranty duration: 12 months, water tank capacity: 105 l, HAKO HAKOMATIC B750 R WB700 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2011 with 1,313 hours of operation. 700mm cleaning head (WB700) equipped with two new medium-hard cylindrical brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 700 Suction width (mm): 850 Theoretical capacity (m²/h): 4800 Clean/dirty water tank capacity (l): 105/105 Number of brushes (pcs): 2 Brush speed (rpm): 850 Total weight, ready to use (kg): 716 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 24V 600W suction turbine NEW 700mm PPL 0.5 cylindrical brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE Psdpezhm Rvefx Abzsgn KEY FEATURES: The 105-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (700 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 10 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 56 mm, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, total height: 2,340 mm, total length: 3,000 mm, total width: 1,080 mm, overall weight: 740 kg, table height: 812 mm, year of last overhaul: 2026, saw blade length: 4,780 mm, saw blade speed: 100 rpm, saw blade width: 34 mm, type of cooling: water, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 360×500 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ 6-month warranty ✓ Service and spare parts provided directly by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty industrial construction Pedpfx Abozhm Rcezsgn ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 360 mm Maximum cutting capacity (rectangular): 500 × 350 mm Continuously adjustable mitre cutting: 60° right to 60° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Total motor power: 3.0 kW Saw blade dimensions: 4780 × 34 × 1.1 mm Hydraulic material clamping vice Hydraulic saw head feed and return Automatic blade load control (PEGAS BRP) Mitsubishi PLC control with touch-screen display Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 740 kg Manufacturer's Showroom Machine We are the manufacturer of PEGAS band saws, and this machine has been used exclusively as our showroom demonstration unit. It has been professionally serviced by our own technicians, carefully maintained, and kept in excellent working condition. The machine is now available for sale as part of our showroom renewal programme. This is an excellent opportunity to purchase a manufacturer-maintained demonstration machine at an attractive price. Built for Demanding Industrial Production The PEGAS 360×500 SHI-LR is a heavy-duty semi-automatic horizontal band saw designed for daily industrial operation, piece production and small- to medium-batch manufacturing. It is suitable for cutting structural steel, stainless steel, tool steel, solid bars, tubes and profiles with high accuracy and reliability. The robust welded saw frame and heavy-duty construction provide exceptional rigidity, vibration damping and long service life even under intensive production conditions. The saw head is mounted in preloaded guide bushings with low-friction surfaces, ensuring precise and smooth operation. The blade speed is continuously adjustable from 20 to 100 m/min via a frequency inverter, allowing optimum cutting performance for a wide range of materials. The hydraulic semi-automatic cycle automatically performs material clamping, cutting, saw head return and vice opening, while loading and unloading of material remain manual. The integrated PEGAS BRP blade load control continuously monitors cutting load and optimizes the feed, protecting the saw blade and increasing productivity. The Mitsubishi PLC control system with touch-screen display provides clear machine diagnostics, cutting parameters and operating information. Inspection and Test Run The machine can be inspected and tested under working conditions at our manufacturing facility in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine, answer any questions, and provide additional information.

Condition: excellent (used), Year of construction: 2003, operating hours: 68,963 h, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 370 mm, displacement volume: 106 cm³, injection pressure: 1,620 bar, injection weight: 97 g, mold height (min.): 200 mm, Arburg 370S-600-150 injection molding machine (258) Number: 258 Availability: in stock Year of production: 2003 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35 Injection weight [g]: 97 Injection pressure [bar]: 1620 Closing force [kN]: 600 Column spacing [mm]: 370 x 370 Plate size [mm]: 570×570 Min. mold height [mm]: 200 Control type: Selogica Tongue: german Installed power [kW]: 22.5 Podpezhm N Sefx Abzsgn Working hours [h]: 68963 Weight [kg]: 3630 Dimensions [mm]: 4000 x 1500 Robot socket: Yes Air valve: 1x Core string: 1x Feed hopper: NO

Condition: used, functionality: fully functional, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Year of manufacture: Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (meter reading) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled rear stop 10 - 1500mm • CNC control Multibend 9000, with 13" monitor, refurbished • Automatic bending die adjustment • Goosefoot rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Sharp rail, straight, H 250 mm, segmented • Sharp rail, R 17.5 mm, L = 2,500mm, divided into 10 x 250mm Psdpezhm Nfefx Abzegn All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, mileage: 775,771 km, power: 330 kW (448.67 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 12,280 kg, maximum load weight: 13,720 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,500 mm, next inspection (TÜV): 12/2026, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space volume: 39 m³, loading space length: 7,200 mm, loading space width: 2,482 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, spoiler, tail-lift, traction control, trailer coupling, * German vehicle * Original mileage: 775,771 km * Condition: see photos * Body: Schmitz Cargobull refrigerated box, type MKO-FP45 Cool DLZ * Undercarriage refrigeration unit: Thermo King, type UT1200 * Cooling capacity up to -20°C with diesel or electric operation * Thermo King control unit in the cab * Double-deck freezer box * Dimensions: Length = 7,200 mm x Width = 2,480 mm x Height = 2,200 mm * Tail lift: BÄR, type BC2000 - C4 * Load capacity: 2,000 kg * Roll-over protection * Trailer coupling * Trailer load: 18,000 kg * ADDITIONAL PRICE, FREEZER TRAILER WITH TAIL LIFT/ THROUGH-LOAD FROM 2018: EUR 9,850,- * Cab: MegaSpace with 2 beds & 2 seats * Retarder * Automatic climate control * Refrigerator * Auxiliary heater * Two comfort seats, air-sprung, with seat heating * Lane keeping assist * ACC cruise control * Tag axle * Air suspension + raise/lower function * Emergency braking assistant * Multifunction steering wheel * Hill start assist * Attention assist * Active braking assist * Differential lock * ABS/ASR/ESP * Sunroof, electric, glass * Horn * Immobilizer * Keyless central locking * Reversing camera * Air-sprung cab * Electric windows Pedpfx Aozhm Iujbzegn * Spoiler * EBS * CB radio * On-board computer * Exterior mirrors, electrically heated and with enlarged glass * Armrest * Wheelbase: 4,500 mm * Gross vehicle weight: 26,000 kg * Unladen weight: 12,280 kg * Payload: 13,720 kg * Double-deck If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our website at: [website address] We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods so that no false impressions arise in the buyer regarding the condition and suitability. Viewing and inspections are possible and expressly desired at any time by appointment. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted.

Condition: used, Offered are used 20DV office containers. CONTAINER TYPE: Office container 20DV CONDITION ON DELIVERY: Used, wind- and waterproof, without equipment, original pictures. All containers are equipped with electrical installation and heating, the entrance door is located on the short side. Containers are sold in used condition and may show defects, contaminations, color differences, rust, etc. Pedozhm H Ropfx Abzsgn DIMENSIONS LxWxH: 6058 x 2438 x 2800 mm, internal clear height 2500 mm. AVAILABILITY: Immediately TRANSPORT: Please provide your postal code so we can send you a free and non-binding offer for the containers including delivery and, if necessary, unloading from the truck. VARIETY: We also offer sea containers in all common sizes (20DV, 40DV, 20HC, 40HC, …) to suit any requirement. Whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: good (used), Year of construction: 2013, Pallet racking system, Bito, frame height approx. 7m, 600kg / pallet space, approx. 2,120 spaces, including grid decks and back panel grating, etc. - used -: For the complete racking system: only €65,000 (net), disassembled, packed, and loaded! Price for the pallet racking system only, ex works: €29,500 (net), disassembled, packed, and loaded! Price for the 876 grid decks: €49,500 (net), disassembled, packed, and loaded! Price for larger quantities: upon request! Manufacturer: Bito Type: P3 Year of manufacture: 2013 Frame height: approx. 7m Frame depth: approx. 1.10m Support type: P3 Number of frames: 96 Crossbeams: Number of crossbeams: 876 Type: PT130M Bay width: 3,600mm Shelf load: 2,400kg Bay load: max. 10,200kg Bay spacing: 1,350mm Grid decks: approx. 876 Grid decks installed Width per grid: approx. 1.78m, 2 grids per level Price includes existing back panel grating Podpfxszhm Eyj Abzegn Condition: good Available: from approx. the end of August 2026 Location: Leipzig

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,500 mm, table load: 400 kg, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. • Table size (L x W): 1000 x 600 mm • CNC control: Heidenhain MillPlus • Tool magazine capacity: 20 tools • Through-spindle coolant: Yes Pgsdpjzhm Etefx Abzen Additional equipment • Chip conveyor Dimensions Machine Depth 3000 mm

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 31i B5, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis CHIRON DZ15W MAGNUM HS was manufactured in 2015. It features an X-travel of 730 mm, Y-travel of 400 mm, and Z-travel of 425 mm. The machine is equipped with a robust table surface measuring 1,060 mm x 430 mm. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ15W MAGNUM HS vertical machining centre we have for sale. Contact us for further details. • Quantity: 4 units available Pgsdpfezhm Emox Abzjn • Spindle drive: 14/15 kW • Max. torque: 95 Nm • Table surface: 1.060 mm x 430 mm Technical Specification Taper Size HSK 63

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 10 h, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 280 mm, control type: PLC-controlled, roller diameter: 50 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 100 rpm, total height: 1,780 mm, total length: 1,900 mm, total width: 1,050 mm, overall weight: 420 kg, table height: 795 mm, year of last overhaul: 2026, saw band length: 2,970 mm, saw blade speed: 100 rpm, saw blade width: 27 mm, number of digital displays: 1, Equipment: CE marking, cooling unit, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 260×280 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ Machine sold directly by the manufacturer ✓ 6-month warranty ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 255 mm Maximum cutting capacity (rectangular): 280 × 250 mm Continuously adjustable mitre cutting: 60° right to 45° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Motor power: 1.5 kW Podpfxjzhm Eao Abzsgn Saw blade dimensions: 2720 × 27 × 0.9 mm Hydraulic material clamping vice Hydraulic saw head feed and return Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 420 kg Built for Daily Industrial Use The PEGAS 260×280 SHI-LR is a semi-automatic band saw designed for both single-piece and small-batch production. The machine is suitable for straight and mitre cutting of structural steel, stainless steel, tool steel, solid bars and profiles. Angle cutting is continuously adjustable from 60° to the right and 45° to the left. All major load-bearing components are manufactured from high-quality cast iron, providing exceptional rigidity, vibration damping, high cutting accuracy and a long service life. The saw head is inclined at 25°, reducing blade wear and extending blade life. The hydraulic semi-automatic cycle controls material clamping, cutting, saw head return and vice opening, while material loading is performed manually. Feed pressure and cutting feed rate are easily adjustable for optimum cutting performance. Inspection and Test Run The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have.

Condition: new, Year of construction: 2026, Power: 1.1 kW Drilling capacity in steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: continuously variable, 120 - 3000 min⁻¹ Pedpezhm D Asfx Abzogn Spindle mount: MK-4 Drilling stroke: 120 mm Spindle overhang: 254 mm Table size: 475 mm x 425 mm Tilting/rotating of the drilling table: 45° to the left / 360° Column diameter: 80 mm Quick-change toolholder: 1 - 16 mm Weight: 132 kg

Condition: used, Year of construction: 1982, Pressing area: 2200mm x 1100mm Opening: 400mm Heating: electric Pedezhm Dvspfx Abzjgn Platen surface: aluminum Emergency stop: yes, pull-cord Pressing force: 60 tons Number of cylinders: 4 Power consumption: 16kW Machine length: 2500 mm Machine width: 1300mm Weight: 3000kg

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Pgodpfxezhm Dpo Abzon Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2002, Working width: 510 mm Planing height: 250 mm Planer cutterhead: Tersa Number of knives: 4 Height adjustment: electric Thickness display: digital display Feed speed: continuously variable Infeed roller: rubber Outfeed roller: rubber Table rollers: no Motor power: 5.5 kW Pedpfx Abezhm Diozsgn Dust extraction port: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 900 kg

Condition: used, mileage: 244,663 km, power: 88 kW (119.65 HP), first registration: 08/2012, fuel type: diesel, tire size: 225/65R16C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, suspension: steel, total length: 6,200 mm, total width: 2,050 mm, total height: 3,000 mm, Year of construction: 2012, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - CD player - Speed limiter - Stability control - Alternating current = Additional Information = Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Tire size: 225/65R16C; Steered; Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Rear axle: Tire tread depth left: 3 mm; Tire tread depth right: 4 mm Pedpfozhm Dcjx Abzsgn Unladen weight: 2,355 kg Payload: 1,145 kg GVWR: 3,500 kg Damage: None

Condition: good (used), Year of construction: 2007, Screen PT-R16000II, year 2007 Manual plate loading Internal plate cutter Laser head with GLV technology Plate format: 1470 mm x 1165 mm Pgodpfxezhm Are Abzen Up to 16 plates/hour in full format 199,000 exposed plates Online L bridge to G & J Quartz III 125 plate developer AGFA ST 125 SX plate stacker Screen EP-B101 network interface Eqious RIP/Workflow All offers are valid subject to prior sale.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 10 h, power: 1.4 kW (1.90 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 230 mm, cutting width (max.): 280 mm, control type: manual, roller diameter: 50 mm, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 35 rpm, rotational speed (min.): 70 rpm, total height: 1,950 mm, total length: 1,600 mm, total width: 890 mm, overall weight: 305 kg, table height: 787 mm, year of last overhaul: 2026, saw blade length: 2,720 mm, saw blade width: 27 mm, type of cooling: water, Equipment: CE marking, documentation/manual, saw blade guard, PEGAS 230x280 GH-LR Gravity Band Saw – Robust Czech-Made Metal Cutting Machine PEGAS 230x280 GH-LR is a high-quality gravity-operated band saw designed for accurate straight and mitre cutting in workshops, maintenance departments and small-series production. The saw combines a robust cast iron construction with reliable hydraulic feed control, ensuring precise cuts and long service life. Main features Cutting capacity: Ø230 mm / 280 × 220 mm Mitre cutting: 0° to +60° right and 0° to -45° left Gravity feed with hydraulic downfeed control Heavy-duty cast iron saw bow, vice and swivel table Manual quick-clamping vice Two blade speeds: 35 / 70 m/min Blade size: 2720 × 27 × 0.9 mm Coolant system included Automatic stop at the end of the cut Mechanical blade tensioning with tension indicator Carbide blade guides with guide bearings 400 V, 0.75 / 1.1 kW motor Machine weight: approx. 305 kg Suitable for Structural steel Stainless steel Tool steel Solid bars, tubes and profiles Workshop production and small batch manufacturing The PEGAS 230x280 GH-LR is known for its durable construction, accurate cutting performance and easy operation, making it an excellent choice for professional metalworking applications. Pgjdpszhm Alefx Abzjn Condition: Excellent Voltage: 3×400 V Available immediately Machine can be inspected under power CE documentation available Location: Czech Republic

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F3S171901, table width: 180 mm, table length: 600 mm, coolant tank capacity: 30 l, pump capacity: 15 l/min, TECHNICAL DETAILS Clamping table dimensions: 600 x 180 mm Tool holder: SK30 Drawbar: M12 x 220 mm T-slots: similar to DIN 650 MACHINE DETAILS Coolant tank: 30 l Delivery rate: 15 l/min Saddle adjustment: handwheels Spindle drive: 2-pole motor via multi-ribbed belt EQUIPMENT Arbor clamping Cooling system with 30-liter tank Coolant tank with quick-release fastener Control panel Work light Coolant hose CE marking Pgedpszhm Afsfx Abzon

Condition: good (used), functionality: limited functionality, 3D Printer Roboze ARGO 500 29-003 Pgsdpozhmz Uofx Abzen Includes 1 HT filament dryer and slicing software Technical data: -Build volume: 500x500x500 mm -Positional accuracy: 10 μm (ultra-precision) -Chamber temperature: 180 °C -15 advanced sensors -Versatile options (9 different industrial materials) -Serial number: A507522P For sale to commercial customers only. Net price = 120,000.00 € Gross price = 142,800.00 € You will receive an invoice with VAT shown.

Condition: good (used), functionality: fully functional, fuel type: diesel, color: green, empty load weight: 8,650 kg, lifting power: 3,800 kg/m, lifting height: 12,600 mm, mast type: telescopic, Year of construction: 2017, Equipment: cabin, pallet forks, ID111069 MACHINE: Telescopic handler BRAND: Merlo MODEL: P38.13EE Panoramic YEAR: 2017 Pjdjzhmz Ijpfx Abzjgn ENGINE: Diesel OPERATING HOURS: unknown TRANSMISSION: automatic DRIVE: 4WD MAST: Telescopic CAPACITY: 3800 kg LIFTING HEIGHT: 12.6 m TYRES: Standard CONDITION: Good

Condition: like new (used), functionality: fully functional, Gate Valve, 16" CL1500 SCH 80, Neway, Stainless Steel, Butt-Weld Ends (Unused) ASTM A182 F316 / A351 CF8M stainless steel body CL1500, butt-weld ends Pgodpfjzhmzzsx Abzen MESC 7724132191