Maszpol

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 82 mm, turning diameter: 840 mm, turning length: 6,500 mm, total length: 9,300 mm, total width: 1,560 mm, total height: 1,400 mm, spindle speed (max.): 900 rpm, spindle speed (min.): 7 rpm, overall weight: 9,500 kg, 1 pcs. used lathe Make: TOS Model: SUS 80 Year of manufacture: 1988 Technical specifications: Swing diameter over bed: 840 mm Swing diameter over cross slide: 530 mm Distance between centers: 6500 mm Spindle bore: 82 mm 22 spindle speeds: 7.5 - 900 rpm Feed rates: 0.049 – 3 mm/rev Tailstock quill taper: 6 MT Drive power: 18 kW Machine weight approx.: 9500 kg Space requirement (L x W x H): 9300 x 1650 x 1400 mm Accessories: - Complete electrical equipment 380 Volt - Rapid traverse - 3-jaw chuck - Faceplate Fsdpfx Aeyirzqjfnjpc - 3 steadies - 1 traveling steady - Quick-change tool post with 6 interchangeable holders - Change gears - Carriage gearbox renewed in 2024 Sale of the machine from foundation

Condition: good (used), turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter over bed slide: 800 mm, center height: 400 mm, Poreba TPK 80 x 4000mm Heavy Duty Lathe Model: TPK 80/4m Swing over Bed: 800mm Swing over Cross Slide: 530mm Swing in GAP: 1080mm Distance Between Centres: 4000mm Fpjdeyimzajpfx Afnsc Spindle Bore: 95mm dia. Spindle Speeds: 800 RPM Machine with: Fixed Steady

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 1,000 mm, turning diameter: 1,350 mm, turning length: 3,000 mm, Status: during general overhaul. The PORĘBA TR series lathe is a universal machine tool intended for both roughing and finishing operations. It is particularly suitable for machining shafts as well as heavy, large-size workpieces. The offered machine is currently undergoing a general overhaul – the last photo presents its current stage of refurbishment. The remaining photographs show TR series lathes after general overhauls performed by our company and delivered to end users. They serve as a reference for the final quality standard and workmanship. Scope of the general overhaul: - Complete dismantling of the lathe - Regeneration and replacement of worn components - Calibration of trapezoidal lead screws and manufacturing of new bronze nuts - Replacement of bearings and sliding bushings, including new spindle bearings - Grinding of bed, carriage and top slide guideways, followed by scraping of mating surfaces (with application of anti-friction materials) - Regeneration of the tailstock quill Fjdpfxjyh H Iys Afnjpc - Regeneration of the tool post - Overhaul and modernization of lubrication and coolant systems - Electrical scope: manufacturing of a new electrical cabinet, complete new machine wiring, and replacement of all electrical components with new ones - Inspection of electric motors together with replacement of bearings - New painting - After completion of the overhaul: trial assembly, preliminary acceptance at our workshop, positioning on the foundation, levelling and final acceptance - Adaptation of the lathe to minimum safety requirements in accordance with applicable EU Directives

Condition: excellent (used), Year of construction: 1987, turning diameter 500 mm turning length 1500 mm swing diameter over bed slide 285 mm Fpsdpfx Aeyg N Rwjfnec total power requirement 11 kW

Condition: excellent (used), Year of construction: 1972, turning diameter 175 mm Fpsdpfxsyfh Nis Afnoc turning length 750 mm swing diameter over bed slide 350 mm total power requirement 4 kW weight of the machine ca. 1,2 t

Condition: good (used), NARDINI MS 125 E / Lead and Feed Screw Lathe - Center height over bed: 150 mm - Swing over cross slide: 140 mm - Distance between centers: 500 mm - Bar capacity: 34 mm - Spindle speeds: 50 - 2500 rpm - Automatic longitudinal/cross feeds - Thread cutting / metric / imperial, etc. - Tailstock: MT 3 - Quick-action collet chuck type 173E incl. 16 collets - Multifix toolpost with inserts - Change gears - Tool cabinet incl. various tools - Machine feet - Chip guard - Drill chuck & live center Fedoyam Slspfx Afnopc - Work lamp - Documentation Dimensions: LxWxH: 1.6 x 0.7 x 1.6 meters / Weight: 1250 kg Errors and omissions excepted.

Condition: repair required (used), Year of construction: 1999, functionality: unexamined, turning diameter: 930 mm, center height: 465 mm, turning length: 2,000 mm, TRP 93 MN x 2000 with Heidenhain Manual Plus Year of manufacture: 1999, machine is in very good mechanical condition The 24 volt circuit needs to be checked Fodpfsyak Hgex Afnjpc Large steady rest 2 pieces 4-jaw face plates Weight approx. 8 tons

Condition: used, functionality: fully functional, spindle bore: 102 mm, center height: 400 mm, turning length: 2,000 mm, 26 spindle speeds from 4.5 to 1400 rpm - powered top slide - rapid traverse - 400 mm Forkardt chuck Fjdpfx Aex U Dxyefnopc

Condition: used, Year of construction: 1953, WEIPERT Lead and Feed Screw Lathe WEZ * Due to changes in our business division within the manufacturing sector and a production reorganization, we are offering for quick sale a WEIPERT WEZ lead and feed screw lathe. * The machine underwent a partial overhaul in 1982. * Year of manufacture: 1953 Serial number: 13867 Three-jaw chuck: Ø 400 mm Swing over bed: 800 mm Distance between centers: 2,500 mm Spindle bore: 90 mm Tailstock: Yes Machine weight: approx. 5,500 kg * A wide range of accessories is optionally available. * IMPORTANT: Fpedox R Tnvjpfx Afnjc For logistical reasons, sales are limited to the European area only. The buyer is responsible for removal, loading, and transport. * "The seller excludes any warranty for the purchased goods. The goods are sold as is, without any guarantee of their fitness for a particular purpose or freedom from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller accepts no liability for damages arising from the use of the goods. Any claims by the buyer against the seller are excluded." * Status: 02.02.2026 * Price: €8,500 negotiable / plus VAT Prices quoted are net, VAT not included. * If you have any questions or require further information, please do not hesitate to contact me. *

Condition: excellent (used), Year of construction: 1983, Heavy-duty lathe POREBA TPK 80 / 10 m for sale. Year of manufacture: 1983. Turning length: 10 m! Machine in very good condition. Extensive accessories. Video available. Fpedex Il R Depfx Afnsc

Condition: reconditioned (used), CAZENEUVE HB 575 x 1500 Lathe Distance between centers: 1,500 mm Center height: 250 mm Swing over bed: 575 mm Swing over cross slide: 525 mm Swing over carriage: 300 mm Spindle bore: 51 mm Tailstock taper: MT5 Max cross slide travel: 305 mm Number of spindle speeds: 18 Power: 10 Hp Spindle speed: from 32 to 1,600 rpm Electrical cabinet Dimensions (L x W x H): 2,905 x 1,175 x 1,345 mm Weight: 2,050 kg New Heidenhain DRO Multifix tool post – Fixed steady rest New 2-axis Heidenhain DRO Fpsdpfx Ajx Ebwfjfnec

Condition: good (used), VOEST DA 360 – Lead and Feed Screw Lathe -Heidenhain digital readout -Center height over bed: 400 mm -Swing diameter over bed: 800 mm -Swing diameter over cross slide: 500 mm -Turning length: 1,000 mm -Spindle bore approx. 87 mm -Speed range: 14 – 1,000 rpm / 18 speeds -Automatic longitudinal and cross feeds -Automatic Z-axis infeed -Tailstock Morse taper 5 -3-jaw wedge-type chuck 250 mm -Multifix base holder with insert -Work lamp -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3,500 kg Fsdpfx Ajx Auldofnjpc Subject to errors or input mistakes.

Condition: excellent (used), spindle bore: 140 mm, turning diameter: 800 mm, GURUTZPE lathe, model Super AT 400/10000, with 10,000 mm distance between centres, prepared for spindle manufacturing, equipped with 2 heads featuring whirlwind system, swing over bed 820 mm, over cross slide 550 mm, spindle bore diameter 140 mm, 24 speeds from 9–500 rpm, with a reducer from 1–63 rpm, overall in good condition. Fpjdoxytqgepfx Afnec

Condition: used, Year of construction: 1985, turning diameter over bed 500 mm turning diameter over slide rest 300 mm Fedoxyagbopfx Afnjpc turning length 1000 mm

Condition: used, Year of construction: 1957, turning diameter over bed 800 mm turning diameter over slide rest 540 mm Fjdpfxsxwp Ehj Afnepc turning length 4000 mm centre height 400 mm centre distance 4000 mm spindle turning speed range 9 - 1140 U/min spindle passage 96 mm weight of the machine ca. 8,0 t - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, spindle bore: 110 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 6 rpm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 224 mm, overall weight: 7,120 kg, Heavy duty lathe is in excellent condition. It is equipped with inverter, automatic and rapid feeds. Electrical system with Siemens controller, ABB 15 kW motor and all wire has been changed. Fsdjxwccgspfx Afnjpc

Condition: good (used), functionality: fully functional, 840mm x 3,500mm, swing over cross slide 530mm, spindle bore 82mm, 7,1-900 Rpm, 18,5Kw, steadys, 4-jaw plate, DRO. Fpsdsxqxvvopfx Afnsc

Condition: used, Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg Number of feed stages and threads: 99 Accessories: 3-axis digital display Mobile chip guard over the entire length (plexiglass) Coolant device Rapid traverse in Z and X axes Multifix steel holder size C with 6 interchangeable cassettes Bed stop with micrometer scale Fixed steady rest - 300 mm Taper sleeve for main spindle MK 6 Travelling center point (center point) MK 6 Bed guides in very good condition! Fsdpfxoxn Ty Rj Afnopc

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Fjdpfjxf E Rcsx Afnepc Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, turning length 4000 mm turning diameter 850 mm turning dia. in gap 1150 mm turning diameter over slide 520 mm turning speeds 5.0 - 630 U/min quill: 6 MK quill travel 250 mm spindle bore 100 mm workpiece weight max. 4000 kg bed width 600 mm travel -x axis 500 mm travel -z axis 3700 mm rapid traverse X 1800 mm/min rapid traverse Z 3640 mm/min feeds X : 0.04 - 4.8 mm/min feeds Z : 0.08 - 9.6 mm/min feeds Z1 : 0.02 - 2.4 mm/min Fpsdpfxexabh Ts Afnjc engine output 20.0 kW weight of the machine ca. 6800 kg. dimensions 6150 x 1500 x 1500 mm good / well-maintained condition (!!) original price at the time approx. 65.000 euros special price on request Description: - particularly heavy, heavily ribbed and wide machine bed - in a rigid one-piece monoblock design - induction-hardened and ground guide prisms - guarantee long-term accuracy and minimal wear - solid headstock - with high-precision, tapered roller bearing main spindle . and 100 mm spindle bore - excellent smooth running at maximum spindle speed - joystick switch for X and Z feed directly on the support - manually switched 4-stage countershaft gear, - powerful main spindle motor enables exact adjustment of the speed . and high torque for heavy machining - rapid traverse for X and Z axes enables quick positioning of the support . and reduces idle times - adjustable overload clutch in the lock case protects the feed mechanism . against damage and failures - central, handy control for feeds and thread pitches - the feed gear offers a wide range of . diametric, inch, module and metric threads - support and top slide are designed for large cutting forces - higher working precision - user-friendly functions Scope of delivery: - SINO position indicator - TOS 3x jaw chuck .. Ø 400 mm - 4-jaw faceplate chuck Ø 800 mm - 4-way tool holder - Fixed steady rest 40-350 mm - Follow-on steady rest 30-120 mm - Fixed centering point - Reducing sleeves - Chuck protection - Coolant device - Machine leveling feet - Work light - Operating tools - Operating instructions

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 570 mm, turning diameter: 800 mm, center height: 400 mm, center width: 4,000 mm, turning length: 3,800 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 800 mm Center height: 400 mm Fpjdpfx Afsw Rqrwsnec Turning length: 3,800 mm Distance between centers: 4,000 mm Max. swing diameter over cross slide: 570 mm Max. swing diameter in gap: 1,130 mm Work spindle Spindle head according to DIN: 55027, size 11, internal taper 20 Spindle diameter at front bearing: 165 mm Spindle bore: 120 mm Face plate diameter: 564 mm Max. chuck diameter: 380 mm Max. spindle speed: 750 rpm Tailstock Quill taper: Morse 6 Quill diameter: 110 mm Max. manual quill stroke: 310 mm Feed rate Longitudinal carriage: 0.092 - 1.590 mm/min Cross slide: 0.046 - 0.795 mm/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6600 x 1850 x 2250 mm Weight: 10,900 kg EQUIPMENT Comprehensive accessory package included.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 520 mm, spindle bore: 71 mm, turning diameter: 800 mm, turning length: 3,000 mm, Swing diameter over bed 800 mm, over support 520 mm Distance between centers 3000 mm Fpjdpfow Nvzzsx Afnjc Spindle nose size 8, spindle bore 71 mm Speed range 11.2 – 1800 rpm Feed range 0.06 – 13 mm/rev Metric thread pitch 0.5 – 160 mm Tailstock quill travel 210 mm, mounting MK 6 Main drive 15 kW incl. rapid traverse, fixed steady rest with roller heads Quick-change tool holder Drehblitz with 2 cassettes, Taper turning attachment, HS reducing sleeve 3-axis digital readout Heidenhain ND 970 3-jaw chuck D 315 TOS, manual

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Fpsdpfsw Ew D Dox Afnsc Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: used, Year of construction: 1976, turning diameter over cross slide: 470 mm, spindle bore: 130 mm, turning length: 1,500 mm, quill stroke: 300 mm, quill diameter: 130 mm, bed width: 600 mm, rotational speed (max.): 600 rpm, quill mount: MK 6, Manufacturer: EST Ticino Model: ET-BM 400 Turning length: 1,500 mm Swing over bed: Ø 800 mm Swing over slide: 470 mm Swing over gap: Ø 400 mm Gap length: 750 mm Spindle bore: 130 mm Spindle power: 15 kW Bed width: 600 mm Quill diameter: Ø 130 mm Quill stroke: 300 mm Spindle mount: 6 MK Spindle speed: 600 rpm Dimensions (approximate) Length: 4,500 mm Width: 1,800 mm Height: 1,800 mm Weight: 5,200 kg With accessories: - Safety equipment - Faceplate, four-jaw chuck, clamping jaws, tool holder, centers, drill chuck, tools Fjdpfxow Ewarj Afnepc Please submit inquiries by email only. All information has been provided to the best of our knowledge. Subject to change. This offer is directed exclusively to businesses within the meaning of § 14 BGB. The sale is made with exclusion of any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller or for injury to life, body, or health. For more information, please visit the Witzenmann GmbH website under the sections “Imprint”, “Terms and Conditions”, and “Data Protection”.

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm Fjdpfswwl Izjx Afnjpc total power requirement 3 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min