Schlegel AG

Condition: refurbished (used), functionality: fully functional, type of cooling: water, welding current (max.): 400 A, Oerlikon Citomig 400 XP – Water-cooled MIG Note: This is a Trade-in. Profesionally refurbished, tested, and ready-to-weld. Suitable for: heavy Steel and Stainless Steel welding, production welding, heavy agriculture. Not suitable for: Thin sheet metal, welding on location, and aluminum. Dedpfxjx Ta A Ss Agdjul Specs: 28-380 Amp 400 Volt 4 Roller drive 2/4 Step 30 Steps adjustable Spot welding and Interval welding Including: Mig welding torch, earth work lead, gas cable, interconnection hose, and transport cart. Indicative new price at the time of introduction: €7500 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (max.): 300 A, Miller Dynasty 300 DX – Water-cooled TIG ACDC Duedpox Ta A Eefx Agdel 3 Months Warranty Profesionally refurbished, tested, and ready-to-weld. Suitable for: Industrial welding, construction, and aluminum. Not stuitable for: Continuous productin welding that asks 100% ED Specs: 300 AMP 400 Volt Pulse 2/4 Takt Start current / end current Up slope / Down slope Pre gas / Post gas AC Frequency and balance adjustable Program memory including: 8 Meter Welding torch, earth work lead with clamp, gas cable, and cart with bottle holder Indicative new price at the time of introduction: €8000 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (max.): 385 A, Migatronic MigMan 385 – Gas-cooled MIG Note: This is a Trade-in. Profesionally refurbished, tested, and ready-to-weld. Suitable for: Daily workshop welding, General maintenance, Agriculture. Not suitable for: Continuous production welding Specs: 385 Ampère Dedpox S Hahjfx Agdjul 400 Volt 24 Steps adjustable 4 Roller drive 2/4 Step Spot welding Pre gas, burnbacktime adjustable Including: Mig Welding torch, earth work cable with clamp, and interconnection hose. Indicative new price at the time of introduction €7500 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, warranty duration: 3 months, type of cooling: water, For sale: Parweld XTM356i with 3 Months Warranty Suitable for Steel – Stainless Steel Refurbished – Serviced – Tested – Fully Functional 30-350 AMP 40% ED: 350A 60% ED: 280A 100% ED: 220A 400 Volt Water-cooled Synergic 2/4 Step 4 Roller drive Fixed programs Burnbacktime adjustable Stick option Including: PRO5000 Welding torch Earth work lead with clamp Gas hose Trolley Estimated New Price: €2495,- Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Dedpsx Sqkqsfx Agdoul

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 with 3 Months Warranty Suitable for Steel – Stainless Steel – Aluminum Refurbished – Serviced – Tested – Fully Funtional 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Indicative new price at the time of introduction: €9000 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Dedox Si I Ispfx Agdeul We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 with 3 Months Warranty Suitable for Steel – Stainless Steel – Aluminum Refurbished – Serviced – Tested – Fully Funtional Dujdpfsx Sg Ncex Agdol 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Indicative new price at the time of introduction: €9000 Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 24 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 30 A, welding current (max.): 400 A, OTC CPTX-i 400 2w 30-400 AMP Synergic Dujdpfxox Sd Uio Agdjl Water-cooled Fixed Programs Steel - Stainless steel Weldable Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, welding current at 60% duty cycle: 300 A, welding current at 100% duty cycle: 240 A, welding current (min.): 40 A, welding current (max.): 385 A, Note: This is a Trade-in. For sale: Migatronic Mig 385 40-385 AMP 400 Volt 2/4 Step 4 Roller drive 24 Steps adjustable Refurbished and tested Including MIG/MAG welding torch Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Dsdox Sd R Depfx Agdjul We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 285 A, welding current at 100% duty cycle: 270 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Kemppi MasterTig MLS 4000 with 3 Months Warranty Steel – Stainless Steel Weldable Refurbished – Serviced – Tested 5-400 AMP 30% ED: 400A 60% ED: 285A 100% ED: 270A 400 Volt Gas-cooled 2/4 Step Pre gas Post gas Up slope Down slope Stick option Including: 8 Meter Welding torch Earth work lead with clamp Gas hose Trolley Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. Dedpfex Ryxnox Agdjul We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 440 A, welding current at 100% duty cycle: 340 A, welding current (min.): 50 A, welding current (max.): 440 A, For sale: Tico Mig 450 C with 3 Months Warranty Suitable for Steel – Stainless Steel Refurbished – Serviced – Tested – Fully Functional 50-440 AMP 60% ED: 440A 100% ED: 340A 400 Volt 2/4 Step 4 Roller drive 30 Steps adjustable Dujdpox Rygxofx Agdjl Spot welding Including: Welding torch Earth work lead with clamp Gas hose Gas bottle holder Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, We offer a portable electric welding unit as a complete package. Dsdpfx Agex Rx Uhodeul

Condition: good (used), Year of construction: 2002, functionality: unexamined, SAW Welding System (Submerged Arc Welding/SAW) with Process Controller A2–A6 and ESAB LAF 635 DC Year of manufacture: 2000 Condition: good, operational (from educational institution) For sale is a powerful submerged arc welding system (SAW) consisting of an ESAB DC power source LAF 635 and A2–A6 Process Controller (depending on version, PEH/PEK system). The system originates from an educational institution and was primarily used for training purposes – typically well maintained and regularly inspected. Ideal for automated/mechanized submerged arc welding, e.g., in steel construction, tank manufacturing, pipe/profile fabrication, cladding (depending on welding head/tractor/gantry – if available). Technical Data – ESAB LAF 635 DC (Power Source) Type: remotely controllable 3-phase DC welding power source for SAW and mechanized MIG/MAG Mains connection: 400/415 V, 3~ 50 Hz (alternatively 440 V, 3~ 60 Hz) Duty cycle: 630 A / 44 V at 100% Adjustment range: 75 A / 18 V up to 800 A / 44 V (46 V) Open-circuit voltage: 54 V Idle power consumption: 150 W Efficiency: 0.84 Power factor (cos φ): 0.90 Protection class: IP23 Weight: approx. 260 kg Dimensions (L × W × H): 652 × 483 × 800 mm (or 652 × 483 × 916 mm incl. base) Dujdpfx Asx Ru Tgsgdjl Fusing/Mains data (reference value as per manual): e.g., 63 A slow-blow, supply line 4 × 16 mm², mains current at 100% load 52 A (at 400/415/440 V) Technical Data – A2–A6 Process Controller (PEH / A2–A6) The A2–A6 Process Controller is used for process control/regulation of the mechanized welding system and is designed for SAW welding. Rated voltage (supplied via power source): 42 V AC, 50/60 Hz Rated power: max. 900 VA Motor connections: for ESAB A2 or A6 motors Motor current: 5 A continuous, max. 10 A Wire feed control: internal EMF control or with AC tachometer (6 pulses/rev) Condition & Origin Good, well-maintained condition (training/educational environment) System is fundamentally designed for industrial use (mechanized SAW / MIG/MAG) ESAB LAF 635 DC Power Source A2–A6 Process Controller (operation/control unit)

Condition: used, Esab Warrier 500 i cc/cv, with warrier Feed 304, regulator, earth clamp, power cable and clamp, regulator, serial number 339 411 0894 Dodsx Rqidjpfx Agdoul

Condition: used, Miller Continuum 350, 907645 , MK120626C, EBT 15579.1.2013, power cable and plug, torch, arc control memory wire feed. Djdjx Rqf Sopfx Agdjul

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, For sale: Dsdpfxex Rppcs Agdjul Miller PipeWorx 400 565 AMP (60% 500A, 100% 400A) 380 Volt 2013 Water-cooled Pulse RMD Programma memory Elektrode option Steel + Stainless Steel weldable Refurbished, tested, and serviced. Test welding possible Including 1,0-1,2mm feed rolls, 2x PRO5000 MIG welding torches, earth work lead with clamp, gas cable, transport cart, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 350 A, welding current at 100% duty cycle: 300 A, welding current (min.): 5 A, welding current (max.): 400 A, For sale: Teamwelder MIG 400 Synergic Puls DW 5-400 AMP 400 Volt Synergic Pulse Water-cooled 2/4 Step 4 Roller drive Fixed programs Steel – Stainless Steel – Aluminum weldable Refurbished – Serviced – Tested Including PRO5000 Welding torch, ground cable with clamp, gas cable, interconnection package, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Duodpfsx Rgwdjx Agdjl Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, hose package length: 4,000 mm, welding current at 60% duty cycle: 273 A, welding current at 100% duty cycle: 212 A, welding current (min.): 30 A, welding current (max.): 300 A, OTC CPTX-i 300C 30-300A Synergic 4 Roller Drive Fixed Programs Steel & Stainless Steel Weldable Including: 4 meter PRO2500 Mig Welding Torch 5 Meter Earth Work lead with Clamp and Dinse plug Gas cable 0,8-1,0mm Wire feed rolls Pressure regulator Manual Visits by appointment only. Dedpex Rgvtsfx Agdsul Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Schweißring Plasmacut 65P 30-60 AMP 400 Volt Refurbished, serviced, and tested Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Dusdpox Rgvmefx Agdsl Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 19 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 370 A, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC ARXIS P403L 30-400 AMP 400 Volt Water-cooled Pulse Double Pulse Low Spatter Synergic 2/4 Takt 4 Roller drive Pre gas Post gas Start current End current Up slope Down slope Hot start Soft start Digital display Dodpfx Aex Rciisgdoul Touchscreen Fixed programs Program memory Burnbacktime adjustable Steel – Stainless Steel – Aluminum – CuSi – CuAl – Inconel – Titanium weldable Including PRO5000 Welding Torch, Earth work lead with clamp, Gas cable, Interconnection hose, and 2 Years Factory Warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), SOYER stud welding machine with a table size of 1450x2000 mm and one SK-5AP head. Automatic stud feeder and SOYER BMS-10 unit for welding studs from 2-8 mm with equipment. Engelhardt controller, the machine is fully operational with complete equipment – ready for use. Dodpfx Agox N Sb Esdjul

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (max.): 400 A, For sale: ESAB Mig 4002cw 400 AMP 400 Volt Water-cooled 2/4 Step 4 Roller drive Program memory Steel – Stainless Steel Weldable Refurbished – Serviced – Tested Including Welding torch, earth work lead, gas cable, and 3 Months Warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Dujdpfx Agox Nwihjdsl All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 60 A, welding current (max.): 450 A, For sale: Dodjx Nqh Depfx Agdsul Cal Cloos GLC 451-C 60-450 AMP 400 Volt Water-cooled 2/4 Step 4 Roller drive 30 Steps adjustable Burnback time adjustable Steel – Stainless Steel weldable Refurbished – Serviced – Tested Including a Welding torch, earth work lead, gas cable, interconnection hose, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Manufacturer: EWM Model: Phoenix 500 TG Expert Dedpfx Agjx Nc Hrodeul With Drive4 WE wire feeder and COOL 71 U41 cooling unit (filled with antifreeze) Mounted on a trolley with bottle holder. Includes manual. Machine can be demonstrated on site. All information provided without guarantee. Subject to prior sale.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 20 A, welding current (max.): 380 A, For sale ESS E2 4100 20-380 AMP (100% 320A) Djdpfsx Nau Tsx Agdjul 400 Volt 50-60HZ Pulse PowerPuls Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Down slope Bi level Burnbacktime Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, and tested Including 4 Meter PRO4000 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 205 A, welding current at 100% duty cycle: 170 A, welding current (min.): 3 A, welding current (max.): 230 A, For sale: EWM Tetrix 230 DC Comfort 5P 3-230 AMP 230 Volt 2/4 Step Pulse Gas-cooled Pre gas Post gas Up slope Down slope Start current End current Stick option Steel and Stainless Steel weldable Dodpfxsx Nat Nj Agdsul Refurbished, tested, and serviced. Including 8 Meter TIG torch, earth work cable, gas cable, 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.