Vtexx Ltd

Condition: good (used), Year of construction: 2007, Fanuc Robodrill T 21 iF, year of manufacture 2007, control system Fanuc 31 i A5, travel X/Y/Z 500/400/300 mm, spindle speed up to 24,000 rpm, 16-position tool changer, accessories, Gsdpfx Ahoxwt Rzj Eekd 12,500 spindle hours, spindle replaced in 2016,

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 500,000 m/min, feed rate Y-axis: 50,000 m/min, feed rate Z-axis: 50,000 m/min, overall weight: 12,000 kg, Special Equipment of the Machine 1. Extension of the tool magazine from the standard 30 tools to 210 tools, incl. preparation for 240 1. Pallet round storage for 10 pallets, incl. setup station, Number of pallets: 10, Pallet size: D 130 mm, Pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Gsdpfx Asxwm Adsh Eekd Pallet clamping force: 22.5 kN 1. HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor, Max. spindle torque: 70 Nm up to 1,500 rpm, Including weekly timer for starting the warm-up cycle and automatic machine shutdown 1. Spindle interface HSK 63A 1. Direct travel measuring system (Heidenhain) on X, Y, and Z axes, supplied with purge air 1. KNOLL coolant system, consisting of: - Scraper belt chip conveyor with lift pump and chip discharge to operator side - Through-spindle coolant supply with KTS25-50T coolant pump, 24 l/min at 70 bar, 5.5 kW Coolant pressure switchable in 3 stages - External cooling with coolant pump, 100 l/min at 1.4 bar - Coolant shower with coolant pump, 100 l/min at 1.4 bar - Compact filter KF200, filter capacity 200 l/min Overall unit dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume: approx. 1,400 liters 1. Cooling water recooler VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1. Coolant spray gun in the working area including pump and electrical installation 2. Spiral chip conveyors 1. TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and smoke, consisting of: - 3-stage prefilter pack - HEPA filter according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ. - Fulfills requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1. Single support with base plate for ISI air filter TEB/BV2 1. RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be changed into the spindle via tool changer: Including EASY PROBE SOFTWARE Pressure sensor for tool length measurement and tool breakage monitoring Special accessories for the control system 1. Increase in workpiece coordinate systems from 6 to 54 1. Coordinate system rotation G68/G69 1. Chamfering and rounding corners 1. Automatic zero point tracking 1. Contour re-approach 1. Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1. IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking (up to 8 different zero points available, G54.2) - TCPC (Tool Center Point Control) for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined working plane (G68.2/G53.1/G69)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, table width: 850 mm, table length: 410 mm, type of input current: three-phase, table load: 300 kg, overall weight: 2,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have 2x Fanuc Robodrill a-D21MiB5 plus units that we no longer use. They are too lightweight for our intended applications. We prefer to make someone else happy with the machines. Some specs below: • Year of manufacture: 2022-03 and 2022-06 • Large chip tray (non-standard) Gedpfxjxwiglj Ah Ejkd • High-pressure pump for through-spindle coolant (non-standard) • Extraction unit • Low operating hours • Always serviced by Humacs Krabbendam • Dataserver in both machines (FTP accessible) (non-standard) • All toolholders as shown in the photo • Fanuc program transfer tool (software) • Manuals Note: We have moved the Renishaw probes to our other machines. The listed price is per unit.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 100 h, Movement X-Axis Movement 508 mm Y-Axis Movement 305 mm Z-Axis Movement 406 mm Additional Equipment CT-style tool changer grippers / Standard program memory, 1GB / Spindle speed: 6000 rpm / Convenience Package / Early power failure detection module / Ethernet interface / HaasConnect: Remote monitoring / HaasDrop / Lifting device / User-definable macros / M-code for media playback; M130 / Run in safe mode / Standard 1-year warranty / Tool changer with 10-position carousel / Touchscreen control / Visual part programming system / Wi-Fi connection for the Haas control / Work light / Spindle orientation / Coordinate rotation and scaling / Internal high-voltage non-isolated transformer for 380-480V operation; Non-USA WIPS-R Wireless Intuitive Probe System / AAG Automatic Air Cooling System+ / AUGER Auger Chip Conveyor / AUTO LUBE Automatic Lubrication System / CPH-HF High-Flow Coolant Pump / MIN QTY LUBE Minimum Oil Lubrication System+ / P-COOL Programmable Coolant Nozzle+ / PULSEJET PulseJet System+ / RJH-TOUCH-XL Large Jog Handle with Remote Control and Touchscreen Display+ / RTAP-3 Synchronized Tapping+ / FIO Installation Field Installed Options with+ This 3-axis HAAS TM-0P was manufactured in 2022. It features a 508 mm X-axis, 305 mm Y-axis, and 406 mm Z-axis travel, ensuring versatile machining capabilities. Standard features include a 6000 rpm spindle, 10-position carousel tool changer, and touchscreen control. Additional accessories like the Wireless Intuitive Probe System and Auger Chip Conveyor enhance its functionality. If you are looking to get high-quality milling capabilities consider the HAAS TM-0P machine we have for sale. Contact us for more information. Application Types Gkedpfjxwfmhex Ah Ejd Milling

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Gkodsxwdwxspfx Ah Esd Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg weight approx. 6220 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 655050, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel paths Gedjxwc Hrspfx Ah Eekd Travel X-axis: 550 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse (X/Y/Z): 60 m/min Spindle Speed: max. 42,000 rpm Tool system Tool holder: HSK 40 E Tool positions: 32 Table Table size: 650 mm × 500 mm Table load: max. 500 kg MACHINE DETAILS Drive power: 15 / 17 kW Control: Andronic 2060 Dimensions & weight Required space (L×W×H): 2.58 m × 1.9 m × 2.26 m Machine weight: 7,200 kg EQUIPMENT Measuring probe Electronic handwheel Erowa zero-point clamping system

Condition: used, Year of construction: 2003, functionality: fully functional, HORIZONTAL MACHINING CENTER "FAMUP" MODEL MF 650 HSK 63 SPINDLES Godpfx Ahoxwccms Eekd 15,000 RPM FULLY ROTARY TABLE ATC WITH 50 POSITIONS HIGH PRESSURE CHIP CONVEYOR YEAR 2003

Condition: used, Year of construction: 2005, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 560 mm, - Manufacturer: Matsuura Gjdpfjxwbqcjx Ah Eskd - Fanuc 31i with Manual Guide - Model: V-plus 550 - Year of manufacture: 2005 - X-axis: 550.0 mm - Y-axis: 410.0 mm - Z-axis: 560.0 mm - Table length: 870.0 mm - Table width: 400.0 mm - Max. workpiece weight: 400.0 kg - Tool magazine capacity: 30 positions for BT40 - Max. spindle speed: 15,000 rpm - Through-spindle coolant - Marposs laser probe - Machine documentation

Condition: good (used), High-speed machining centre Brother TC-S2A Year of manufacture: 1999 Serial No.: 111177 Spindle hours: 9,705 h Power-on hours: 36,375 h Table: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: BT30 Spindle speeds: 12 – 10,000 rpm Tool changer: 14 stations Feedrate X/Y: 1 – 10,000 mm/min Gkedpfoxv R I Uox Ah Eed Feedrate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale The machine is fully operational and ready for immediate use.

Condition: good (used), High-Speed Machining Center Brother TC-S2A Year of manufacture: 1999 Serial No.: 111177 Spindle hours: 9,201 h Power-on hours: 26,077 h Table: 850 x 450 mm Travel range X / Y / Z: 500 / 450 / 410 mm Gkodpfxoxv R H Dj Ah Eed Table load: 300 kg Spindle taper: BT30 Spindle speed: 12 – 10,000 rpm Tool changer: 14 positions Feed rate X/Y: 1 – 10,000 mm/min Feed rate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale. The machine is in fully functional and immediately operational condition.

Condition: good (used), High-Speed Machining Center Brother TC-S2A Year of manufacture: 1999 Serial number: 111177 Spindle hours: 15,923 h Power-on hours: 44,781 h Gedpfx Asxv R Hksh Ejkd Table: 850 x 450 mm Travel (X / Y / Z): 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: BT30 Spindle speeds: 12 – 10,000 rpm Tool changer: 14 positions Feed rate X/Y: 1 – 10,000 mm/min Feed rate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale. The machine is in fully functional and immediately operational condition.

Condition: good (used), Year of construction: 2010, Matsuura MAM72-35V PC32 5 Axis Multi Pallet Loading Vertical Machining Centre With G-Tech 30i Control Maximum Component Dimension Ø350 x 240mm High. Maximum Pallet Load 60kg. Maximum Workpiece Dimension Ø350mm x 300mm High. Axis Travel 'X'=550mm, 'Y'=440mm, 'Z'=580mm, 'B'= +65/-125°, 'C'=360°. Rapid Traverse 'X,Y,Z'=60m/min, 'B'=50rpm, 'C'=100rpm. Maximum Maxia Spindle Speed 20,000rpm (11/15kW Motor). Spindle Taper BT40. 240 Position ATC. Maximum Tool Ø80mm (Ø150mm Non Adjacent Tool). Maximum Tool Length 260mm. Maximum Tool Weight 8kg. Tool Changing Time Tool to Tool 1.7sec. S/No. 18082 (2010). Gksdpexvz Tbefx Ah Ejd With Renishaw NC4 Laser Tool Measure and Breakage Detection Probe, Renishaw Spindle Inspection Probe interfaces, Auger To FSE Chip Conveyor, Filtermist FX4000 Mist Extraction Unit, SMC IDF8E Air Dryer, Daikin AKZ567 Oil Cooler, FSE Through Coolant System, Axis Scale Feedback, Visiport Spin Window, Signal Tower, Oil Skimmer, Wash Gun & Manuals. Note: Tooling Not Included. Note: Spindle Drive Needs Attention, Spindle Seems Free Running, Possibly Motor Needs Inspection.

Condition: good (used), High-speed machining center Brother TC-22A Year of manufacture: 2008 Serial number: 122085 Gkjdpfx Ahjxvy Nzo Eod Spindle run time: 4,694 h Operating hours: 16,191 h Table: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: HSK 40 Spindle speeds: 12 – 10,000 rpm Tool changer: 24 positions Feed X/Y: 1 – 10,000 mm/min. Feed Z: 1 – 20,000 mm/min. Rapid traverse X/Y: 36 m/min. Rapid traverse Z: 50 m/min. 4th axis by Lehmann The machine is in fully functional and immediately operational condition.

Condition: used, Year of construction: 2019, functionality: fully functional, OPTIMUM - OPTImill F 105 CNC Offer Details Stock number: 1039-8705 Machine type: Machining center - Vertical Manufacturer: OPTIMUM Model: OPTImill F 105 CNC Gedpfx Aexvx Snjh Eekd Year of manufacture: 2019 Control: Sinumerik 808D adv. Siemens Location: D-59302 Oelde, Germany Country of origin: - Availability: immediately Delivery terms: ex works Additional information: CNC vertical machining center OPTIMUM - OPTImill F 105 CNC - DEMONSTRATION MACHINE Technical Details Travel X-axis: 550 mm Travel Y-axis: 305 mm Travel Z-axis: 460 mm Control: Sinumerik 808D adv. Siemens Main spindle: Speed range - main spindle: 10 – 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable: Clamping area: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 – 600 mm Tool changer: Number of tool stations: 12 positions Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feedrates: Rapid traverse (X / Y / Z): 10 m/min Feed speed: up to 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm Total power requirement: 15 kVA Machine weight approx.: 2.9 t Space requirements approx.: 3.5 x 2.5 x 2.4 m Included Accessories Documentation Chip conveyor system Coolant system Tool changer Probe: RENISHAW - Primo

Condition: used, Year of construction: 2004, Immediately available ex location: CNC Vertical Machining Center HAAS Type: Super Mini Mill Year of manufacture: 2004 Haas control Table size: 914 x 305 mm Table load capacity: 227 kg Godpfx Ahexvnzxo Eskd Travel X/Y/Z: 406/356/381 mm Rapid traverse X/Y/Z: 15 m/min Spindle speeds up to 8000 rpm 10-station tool changer Weight: 2 t Accessories Offered at a price of EUR 7,000—plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements height 2540 mm Machine weight 2800 kg Control Unit Brand HEIDENHAIN Model TNC 310 Main Drive Spindle speed range 4500 Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Gkedoxuw Dmspfx Ah Ejd Table load 200 kg This 3-axis DECKEL MAHO DMU 50 M was manufactured in 2003. It features a Heidenhain TNC 310 control, electronic handwheel HR 150, and a main drive speed of 4,500 min-1. The machine offers a rapid traverse of 5 m/min and a working range of 500 x 400 x 400 mm. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 50 M machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 508 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 5-axis HAAS DM-1 vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a spindle drive of 11.2 kW, and a tool magazine with 18+1 tools. The rapid traverse rate is 61 m/min, enhancing productivity. If you are looking to get high-quality milling capabilities, consider the HAAS DM-1 machine we have for sale. Contact us for more information. Gkedpfx Aexulfljh Eed Application Types Milling

Condition: new, functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, spindle speed (max.): 10,000 rpm, XV 1060 Control SINUMERIK 828 D - ShopMill with 15.6" touch screen Clamping surface 1,160 x 600 mm, number of T-slots: 5 X-axis: 1,000 mm, Y-axis: 600 mm, Z-axis: 650 mm Min. distance spindle nose - table: 130 mm, max. 780 mm SK 40 taper, spindle max. speed 10,000 rpm Double-arm tool changer, 24 tools Standard features: Gsdsxugyqspfx Ah Eokd - Rigid tapping - Swiveling operator panel - Sliding door with interlock - Viewing windows in work area enclosure - Control cabinet with heat exchanger - 2 LED work area lights - 3-color machine status indicator light - Portable electronic handwheel - Central automatic grease lubrication for all linear axes and X, Y, Z ball screws - Power-off after program end - Compressed air at main spindle for chip removal - Chip flushing system with rinse gun - Spindle cooler for 10,000 rpm - Air gun - Coolant nozzles at spindle - Work area lighting on/off switch - 1 set of leveling elements - Electrical system in accordance with VDE regulations

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Gksdpfx Ahsxtvhus Esd Since 2014, as a machinery manufacturer, we have been developing and producing our equipment in Austria. In addition to our individually customizable standard machines, we are also capable of providing bespoke solutions. We are happy to send you our product catalog—simply get in touch with us. --- Machining Center HSC 544HP 3rd Generation Key Data - Travel: 500 x 400 x 330 mm - BT30 spindle with 30,000 rpm and 6 Nm - 18-position tool magazine - Feed rate up to 27 m/min - incl. portal elevation and rotary-swivel table with 160 mm table diameter - Compact dimensions: W 1,460 x D 1,470 x H 2,110 mm, weight approx. 2,200 kg The machines are configured and assembled according to customer specifications. Depending on your requirements, numerous options are available, such as various spindle types up to 60,000 rpm, different cooling systems, direct path measuring system, integrated automation, etc. Control System - CS-Lab / AMT | Beckhoff optional - Intuitive and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Integration of robots, pallet changers, workpiece changers, etc., possible Machine Frame - Solid mineral cast frame optimized by FEM simulations - Very high vibration damping, rigidity, and optimal thermal behavior - Use of roller guides instead of conventional ball guides for maximum stiffness - High-speed ball screws with reduced heat generation Drive Train - Precisely matched AC servo drives for high contour accuracy - Direct-drive, backlash-free ball screws Overview of Spindle Types 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We will be happy to provide you with competent and comprehensive advice in order to offer exactly the right solution for your machining task.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, as a machine manufacturer, we have been developing and producing our systems in Austria. In addition to our individually configurable standard machines, we are also able to offer custom solutions. We will be happy to send you our product catalog—just get in touch with us. Machining Center HSC 544S - 3rd Generation Key Data - Travel: 500 x 400 x 330 mm - ISO20 spindle with 30,000 rpm and 0.6 Nm - 18-position tool magazine - Feed rate up to 27 m/min - Includes gantry height extension and rotary-swivel table with a table diameter of 160 mm - Compact dimensions: W 1,460 x D 1,470 x H 2,110 mm, weight approx. 2,200 kg The machines are configured and assembled according to customer specifications. Numerous options are available depending on requirements, such as various spindle types up to 60,000 rpm, different cooling systems, direct path measuring system, integrated automation, and more… Control System - CS-Lab / AMT, optional Beckhoff - Clear, customizable user interface and simple touchscreen operation - S-curve acceleration for dynamic axis movement with high precision - Integration of robots, pallet changers, workpiece changers, etc., possible Machine Frame - Robust machine frame made of mineral cast, optimized using FEM simulations - Excellent vibration damping, stiffness, and ideal thermal behavior - Use of roller guides instead of standard ball guides for maximum rigidity - High-speed ball screws with reduced heat generation Drive Train - Well-matched AC servo drives for high contour accuracy - Direct-drive, backlash-free ball screws Spindle Types Overview 60,000 rpm I 0.3 Nm 40,000 rpm I 0.9 Nm 36,000 rpm I 2.4 Nm 30,000 rpm I 3.5 Nm Gkodoxtvhnepfx Ah Eed 30,000 rpm I 6.0 Nm 20,000 rpm I 10.5 Nm We are happy to provide you with expert and comprehensive advice to offer exactly the right solution for your machining application.

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 2349 mm Measurements depth 1640 mm Measurements height 2600 mm Machine weight 2300 kg Movement X-Axis Movement 500 Y-Axis Movement 300 Z-Axis Movement 300 Godpfxjxtq U As Ah Eskd This 3-axis Hyundai SPT-V30TD was manufactured in 2001. It features a spindle speed of 8,000 rpm, table dimensions of 600 x 380 mm, and a maximum table load of 200 kg. Ideal for milling applications, it offers X, Y, and Z travels of 500 mm, 300 mm, and 300 mm respectively. Consider the opportunity to buy this Hyundai SPT-V30TD vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2001, functionality: fully functional, MAZAK - Variaxis 200 Offer Details Stock number: 1039-9049 Machine type: Vertical Machining Center Manufacturer: MAZAK Model: Variaxis 200 Year of manufacture: 2001 Control unit: Mazatrol Fusion 640M Location: D-59302 Oelde Country of origin: Japan Delivery: immediate Freight terms: ex location Additional information: CNC Vertical Machining Center MAZAK - Variaxis 200 - 5-axis WE OFFER YOU: - Shop-inspected machines - Loaded on truck, free of charge - NO auction fee - Delivery available (surcharge applies) - Unloading and commissioning (surcharge applies) Technical Details Travel (X): 510 mm Travel (Y): 510 mm Travel (Z): 460 mm Control: Mazatrol Fusion 640M Main spindle: Max. speed: 12,000 rpm Drive power - main spindle: 22 / 15 kW Spindle taper: ISO 40 Spindle diameter: 80 mm Acceleration 0 - 12,000 rpm: 1.7 sec Table clamping area: 500 x 400 mm T-slots: 5 x 18 mm T-slot spacing: 80 mm Distance spindle / table: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Godpfjxtpa Rjx Ah Eekd Swivel range A-axis: +30 / -120° Rotary range C-axis: +/- 360° Tool changer: Number of tool stations: 40 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent positions free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Chip-to-chip time: 4.5 sec Feed rates: Feed speed X/Y/Z: 1 - 50,000 mm/min Rapid traverse X/Y/Z: 50 m/min Indexing A + C: 0.001° Swivel time 90°: A/C: 1.9 / 1.5 sec Total power requirement: 51 kVA Machine weight approx.: 7.5 t Space requirement approx.: 3.4 x 3.7 x 2.8 m Accessories Hydraulic unit Coolant system Chip tray Tool measurement Documentation

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, General Data Measurements width 2665 mm Measurements depth 3065 mm Measurements height 2840 mm Machine weight 5600 kg Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 20 – 12000 Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 550 mm Gsdexr Ryvjpfx Ah Ejkd Z-Axis Movement 510 mm Table Table load 600 kg Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 Media Power consumption 20 kVA Additional Equipment Job Shop package Renishaw PP40 wireless workpiece probe TS27R tool measurement probe Scraper-type chip conveyor Coolant tank capacity: 200 L (left side) Coolant pump: 20 bar internal through-spindle coolant Machine enclosure roof LED work area lighting This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 480 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 270 mm, table width: 300 mm, table length: 600 mm, table load: 300 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 6,000 rpm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, operating hours of spindle: 1,381 h, spindle motor power: 7 W, input voltage: 440 V, type of input current: three-phase, Equipment: documentation/manual, x-travel 480 mm Gkedoxrpahspfx Ah Ejd y-travel 360 mm z-travel 270 mm Control system: Brother Spindle speed range: 6 - 6,000 rpm Main spindle drive power: 5 / 7 kW Tool holder: SK 30 Table clamping surface: 600 x 300 mm Rapid traverse (x / y / z): 36 / 36 / 30 m/min Number of tool stations: 14 positions The machine is fully functional. Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and are provided without guarantee. Intermediate sale reserved! The machine is sold without any warranty.

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E Gedpfx Ajxrg Ddoh Eekd table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our opinion, the machine is in very good condition and can be condition and can be inspected by appointment. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information, as well as subject to prior sale!