Kohlbecker GmbH & Co KG

Condition: used, Year of construction: 1989, pressure 040 t throat 220 mm stroke 8 - 100 mm Stroke rate 32 - 160 / min Distance table/ram, max. stroke up, adjustment up 370 mm Table surface area 630 x 450 mm Hole in the table 200 mm Passage to the back 280 mm Ram surface 360 x 260 mm Power capacity 3,0 kW Weight 3,0 t Dimensions (WxDxH) 1,5 x 1,8 x 2,6 m SPECIAL DEAL as is where is Nedpfeylzxqsx Ag Ioku WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: good (used), Year of construction: 1998, throat depth: 250 mm, ram adjustment: 180 mm, table height: 830 mm, total height: 2,400 mm, drop-through hole in table: 170 mm, table width: 800 mm, table length: 500 mm, installation height: 450 mm, stroke adjustment: 102 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 4,100 kg, pressing force: 50 t, power: 3 kW (4.08 HP), compressed air connection: 6 bar, Eccentric press, pressing force 50 t, table size 800 x 500 mm, throat depth 250 mm, adjustable stroke 8 - 110 mm, 60 strokes/min, ram adjustment 180 mm, motor 3 kW, dimensions 1100x1300x2400 mm, weight approx. 4100 kg Nsdpfxeyly Evs Ag Ioku

Condition: good (used), Year of construction: 2010, pressing force: 250 t, Used Yangli press brake, 250 ton press force x 3200MM, type MB 8, 8 axes + 1. Can be inspected in operation. Year: 2010, equipped with Delem control. Bottom dies 50-65-100MM + 1 new standard upper blade. Nedpjykzq Rsfx Ag Isku

Condition: used, Year of construction: 1992, pressure 25 t Nedpfx Agoykb Ebo Ioku throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: used, pressure 35 t throat 300 mm stroke 10 - 120 mm no. of strokes 110 Hub/min ram adjustment 50 mm Nodeykb D Repfx Ag Isku total power requirement 3 PS

Condition: used, Year of construction: 2004, pressure 25 t throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW Nksdpsykb D Defx Ag Ieu weight of the machine ca. 2,8 t

Condition: used, Year of construction: 1996, pressure 45 t Nkodpfx Ajykb Dwjg Isu throat 230 mm stroke 0 - 160 mm no. of strokes 120 Hub/min ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,95 t

Condition: used, pressure 35 t Nkedpfjykb Dqjx Ag Isu throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t

Condition: used, Year of construction: 1992, pressure 25 t Nksdpoykb Dksfx Ag Iju throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: used, pressure 45 t throat 230 mm stroke 10 - 140 mm no. of strokes 80 Hub/min Nkjdpfx Agjykb Dde Isu ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,7 t

Condition: used, pressure 25 t throat 250 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW Njdpfx Agoykb A To Ioku weight of the machine ca. 1,95 t

Condition: refurbished (used), pressure 40 t throat 225 mm stroke 8 - 84 mm table surface area 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 mm hole in the table 210 x 170 mm clamping plate 570 x 450 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t Nkedpfx Ajyf N Dzeg Isu

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nedpjydlx Sjfx Ag Ioku Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm Nkedpfeyatx Esx Ag Isu ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized tappet height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reverse switch (return) - Electric stroke counter - Electric preselection counter - Cam switch mechanism The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and completely technically inspected - New paintwork (also available according to customer specifications) - New seals - New control cabinet with touchscreen, including wiring of the machine - Current press inspection

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Nkodoyath Tspfx Ag Iju Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: good (used), Stock number: 2829 Manufacturer: Eisenwerk Hensel Bayreuth - EBU Machine number: P5044070 Type: SK 25 Press force: 25 t Table: 595 x 410 mm Nodpfx Agex Uwb Ij Isku Ram: 170 x 150 mm Passage hole: 210 x 170 mm Throat depth: 200 mm Strokes per minute: 150 Stroke: 4 to 80 mm Ram height adjustment: 70 mm Table adjustment: 240 mm Condition: good Connection: 1.5 HP (1.1 kW) Weight: 1.5 t Dimensions: 800 x 1,300 x 2,000 mm

Condition: good (used), Year of construction: 1990, In good technical condition, fully functional. Year of manufacture: 1990. Nominal press force: 63 tons. Table working surface dimensions: 800 x 630 mm. Machine weight approx. 6 tons. Nksdpox Sqtfsfx Ag Isu

Condition: good (used), Year of construction: 1978, Pressing force 45 t Nsdpfxjx Rvbxs Ag Ioku

Condition: new, Year of construction: 2025, table width: 400 mm, table length: 600 mm, stroke adjustment: 45 mm, overall weight: 1,500 kg, pressing force: 35 t, stroke length: 70 mm, power: 3 kW (4.08 HP), punching force: 35 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is designed for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for serial production. Key Advantages - Consistent stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Production-ready operation with PLC control and dual-hand/foot pedal controls Applications - Cold cutting and punching operations - Cold cropping applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guideways • Spheroidal cast iron connecting rods and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Conforms to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies tailored to your specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (35 TON) Capacity: 35 Ton Usable bolster size: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Bolster–ram distance: 330 mm Adjustment (ram adjustment): 45 mm Nkedsx N Nd Rjpfx Ag Iju Bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety lock: Mechanical safety lock Lubrication system: Automatic lubrication PLC: Included Safety barrier: Included Operation system: Pneumatic clutch–brake system Mounting type: Floor-standing Frame type: C-type steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×H): 1100×1400×1800 mm Approximate weight: 1500 kg Note: Please contact us for any modifications required in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: used, Year of construction: 2007, pressure 125 t stroke 12 - 140 mm daylight, max. stroke above - ram adjustment above 495 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm total power requirement 70 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated multi-disc wet multi-plate clutch and spring-loaded safety brake - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment - Ram weight compensation Nksdpfxexx A Dts Ag Iju - Manual TDC correction - Belt drive - Press force measuring device - hanging control panel - reverse switch (return) - electric stroke counter - electric preselection counter - electronic cam switch - clamping plate - two-hand control panel, swiveling, height-adjustable - Operating hours counter - 1 set of swing elements - with feed The press is technically inspected at our premises and undergoes a current safety inspection.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: EEP-30.22070 A.D, throat depth: 180 mm, ram adjustment: 60 mm, table height: 700 mm, total height: 2,150 mm, drop-through hole in table: 150 mm, table width: 580 mm, table length: 360 mm, total width: 1,500 mm, total length: 1,250 mm, overall weight: 1,900 kg, pressing force: 45 t, distance table to ram: 350 mm, stroke length: 90 mm, power: 4 kW (5.44 HP), compressed air connection: 6 bar, input voltage: 380 V, stroke rate (max.): 145 1/min, Equipment: CE marking, documentation/manual, safety light barrier, For Sale: ELMALI EEP-PK45 C-Type Eccentric Press – Like New Condition (+ gratis compressor) We are offering a nearly unused ELMALI EEP-PK45 eccentric press machine, manufactured in 2022 in Turkey. This robust C-frame press delivers a 45-ton pressing force, making it ideal for precision metal forming applications. The machine has never been used in production and is in excellent condition — ready for immediate operation. - Steel frame construction body - Ram and similar pieces steel casting - Pneumatic clutch and brake combination - 4 guide ram - Ram adjustment - Main and extra table with T slots - Single or continous stroke - Foot pedal or double hand control - Centralized lubrication system - Gear in oil bath - Photocell safety guard - Die Adjustment and Reverse turn mode For the machine we are offering a KÄSER Premium 200/24W type compressor as a gratis. Nedpfx Aexq Sbfog Ioku

Condition: used, Manual folding machine Schuller MAH 2-2000, working width 2030 mm, sheet thickness 2.0 mm Nkodexn Avnspfx Ag Iou

Condition: good (used), – Capacity 25 tons – Table 525 x 405 mm – Stroke 75 mm – 120 strokes/min. Nkodsxk Tm Nspfx Ag Iou – Foot control or two-hand operation – Central lubrication system – 380V

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm Nedpfxsxh Sx Es Ag Ijku weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: new, Year of construction: 2025, throat depth: 175 mm, table width: 375 mm, table length: 570 mm, stroke adjustment: 60 mm, pressing force: 25 t, An eccentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, used in cold forming operations such as punching, shearing, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 25 Ton is designed for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance suited for mass production. Key advantages: - Stable stroke performance and high repeatability in series production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready usage with PLC control + dual hand/foot operation Areas of use: - Cold shearing and punching operations - Cold blanking applications - Metal die forming - High-volume production lines STANDARD FEATURES • Steel fabricated body • Four-sided guided ram • Spheroidal cast iron connecting rod and gearboxes • Crankshaft and transmission shafts made of 4140 normalized steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot operation system • Mechanical safety system • Emergency reverse motor function • Conforms to occupational safety regulations • Meets CE standards OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set customized to requirements • Eight-sided slide guidance TECHNICAL SPECIFICATIONS (25 TON) Capacity: 25 Ton Throat depth: 175 mm Bed-to-ram distance: 300 mm Slide-to-table distance: 310 mm Distance between uprights: 290 mm Ram adjustment (stroke regulation): 50 mm Approx. press width: 870 mm Approx. press depth: 1380 mm Approx. press height: 1870 mm Front anchorage dimension: 490 mm Side anchorage dimension: 670 mm Table hole diameter: Ø145 mm Table size: 375×570 mm Nedpfx Agsxg R Uco Ieku Die mounting slot diameter: Ø35 mm Ram size: 260×170 mm Floor to table height: 710 mm Stroke adjustment: 10–60 mm Strokes per minute: 120 spm Motor power: 3 kW Motor speed: 1000 rpm Approx. weight: 1300 kg Note: Please inform us if you require any modifications to the technical specifications. PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.