Härtel Laser & Wasser

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Technical Specification Model: OptiMAX 80X Working area (X × Y): 4,267 × 2,032 mm Hsdjxm Rigjpfx Aaqew Z-axis (height): 305 mm, motorized Machine footprint: approx. 7,925 × 3,937 mm Height: approx. 3,050 mm Weight (empty): approx. 4,150 kg Maximum material load: 1,950 kg/m² Power supply: 3-phase, 380–480 V, 50–60 Hz Noise level: < 80 dBA (during submerged cutting) Speed (X-Y): up to 8,890 mm/min Accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Roundness: ± 0.076 mm Pump Type: EnduroMAX 50 HP Pressure: up to 60,000 psi (≈ 4,100 bar) Flow rate: approx. 4.5 l/min (depending on nozzle) Reliable operation, energy efficient and built for long service life Equipment & Options TiltaJet cutting head for angle compensation – delivers straight cuts without secondary finishing SRS (Solids Removal System) for automatic extraction of abrasive and particles Offered exclusively within Sweden

Condition: good (used), Year of construction: 2019, Gebruikte waterstraalsnijder van Microstep (ex lease) Type: AquaVut 6001.25 WW Tafelafmetingen: 6000 x 2500 mm Hypertherm 4100 bar pomp 2 snijkoppen Bouwjaar: 2019 Hedpfxexldvqo Aaqew

Condition: used, Year of construction: 2007, High-pressure pump with 3 pistons for waterjet machines Control cabinet for the high-pressure pump Hjdjxix Dkspfx Aaqjw 5-axis cutting head with complete assembly

Condition: good (used), Year of construction: 2020, operating hours: 206 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 88 mm, Waterjet Cutting Machine Multicam V-204-W with High-Pressure Pump KMT Streamline SL-VI 50 STD and Abrasive Feeder KMT Abraline V Year of manufacture: 2020 Operating hours: Only 206h !!! (read directly from the high-pressure pump) Complete documentation available. The cutting tank is fitted with grating supports. It can also be equipped with the original plastic supports (approximate cost: €3,000). (Y) Axis ... 1524 mm (X) Axis ... 3048 mm (Z) Axis ... 88.9 mm Position accuracy: +/-0.001″ Repeatability: +/-0.002″ Rapid traverse (max): 1000 IPM Cutting speed (max): 800 IPM EQUIPPED WITH: - KMT Streamline SL-VI 50 STD, 50 Hp (37 kW) – 500 - 3,800 bar Hodjxg Nnnepfx Aaqsw - Dual side stepper motors - Multicam hand-held graphic interface - KMT Abraline V – Highly accurate abrasive feeding/hopper system

Condition: used, Year of construction: 2004, operating hours: 4,812 h, functionality: fully functional, travel distance Z-axis: 250 mm, table length: 4,050 mm, table width: 2,050 mm, pressure: 4,130 bar, table height: 950 mm, Equipment: safety light barrier, FOR SALE BY TENDER Hodexguugspfx Aaqew

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Hsdexgumcspfx Aaqsw Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 Hedpexgua Asfx Aaqjw 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,084 h, functionality: fully functional, machine/vehicle number: 13351, High-Pressure Pump HYTRON 40.37 Manufacturer: BHDT, BFT Year of manufacture: 2012, #13351 Operating hours: 19,084 h Used, fully serviced, tested, and ready for operation, Maximator JET certificate - Main drive motor power: 37 kW - Auxiliary unit oil/air cooler: 1.1 kW - Auxiliary unit pretreatment pump: 0.46 kW - Flow rate: 3.8 l/min - Design pressure: 420 MPa - Max. operating pressure: 400 MPa - Continuous operating pressure: 380 MPa - Pulsation damper: 2.5 l - Oil tank capacity: 140 l - Ambient temperature oil/air cooler: 10-35 °C - Dimensions (W x D x H): 1,900 x 970 x 1,520 mm - Weight: 1,250 kg - Max. noise level: 78 dB(A) - Pressure- and flow-controlled hydraulic drive - Oil/air heat exchanger - Pulsation damper - Primary and secondary filter units - Infinitely variable pressure adjustment from 50 to 400 MPa - Plain text display with event log - Pressure relief valve - Water feed pump - Setpoint display for operating pressure - Soundproof enclosure Price ex location Schweinfurt, plus VAT: €14,500 Additionally: Hodpfx Aaoxfil Doqjw • Transport • 1-day training for up to 4 persons in Schweinfurt or optionally at the customer’s site • Installation and assembly

Condition: refurbished (used), Year of construction: 2006, operating hours: 28,852 h, functionality: fully functional, machine/vehicle number: 13006, High-Pressure Pump HYTRON 40.30 Manufacturer: Böhler, BHDT, BFT Year of manufacture: 2006, #13006 Operating hours: 28,852 h From previous ownership, fully serviced, inspected, and operational, Maximator JET certificate, new pulsation damper with TÜV (German Technical Inspection Association) certification! Hodpjxfilkofx Aaqsw • Main motor drive power: 30 kW • Auxiliary unit oil/air cooler: 1.1 kW • Auxiliary unit booster pump: 0.46 kW • Flow rate: 3.4 l/min • Design pressure: 420 MPa • Max. operating pressure: 400 MPa • Continuous operating pressure: 380 MPa • Pulsation damper: 2.5 l • Oil tank volume: 140 l • Ambient temperature for oil/air cooler: 10–35°C • Width x Depth x Height: 1,900 x 970 x 1,520 mm • Weight: 1,250 kg • Max. sound level: 78 dB(A) • Pressure and flow rate-controlled drive hydraulics • Oil-air heat exchanger • Pulsation damper • Primary and secondary filter units • Infinitely variable pressure adjustment from 50 to 400 MPa • Alphanumeric display with event log • Pressure relief valve • Water booster pump • Setpoint display for operating pressure • Noise reduction enclosure Price ex Schweinfurt plus VAT: €16,000 Additionally: • Transport • One-day training for up to 4 people in Schweinfurt, or optionally at customer site • Installation and commissioning

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 95521, Water Jet Sweden NCP 4020 D Year of manufacture: 2009 1.1 TECHNICAL DATA 1 x Water Jet Cutting Machine, NC 4020 D 1 x FANUC 310iA control unit 1 x IGEMS CAD/CAM software 2 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed units 1 x KMT Jetline, 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit & control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit Hedpfxjw Snybe Aaqjw 1 x Machine safety enclosure 1 x PanelOne HMI "EDGECUT" operator interface 1 x Remote control for high-pressure pump 1 x Remote maintenance 2 x Diaphragm pump and extraction units 1 x Waste container, 1000 l 1 x Pressure vessel, 200 l, and 1-ton online abrasive conveyor/online abrasive container 1 x Starter hole drilling unit 1 x MPG, portable manual control unit 1.1.1 MACHINE DATA Table dimensions (W x D): 4200 x 2275 mm - Cutting area (W x D): 3980 x 2010 mm - X-axis travel (2D): 3530 mm - Y-axis travel (2D): 2010 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse X: 30,000 mm/min - Rapid traverse Y: 15,000 mm/min - Rapid traverse Z: 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V + PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS

Condition: excellent (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 2602, Waterjet 2019. In excellent condition, for more information please contact us by email. Hsdpfx Ajw N N Dvoaqow

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 178 mm, table length: 3,000 mm, table width: 2,000 mm, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, rapid traverse Z-axis: 12,700 m/min, For sale: FLOW MACH3 3020b waterjet cutting machine in excellent technical condition. The machine has been professionally operated and regularly serviced – a detailed service log, meticulously kept by the operator, is available. Technical specifications: - Year of manufacture: 2013 - Commissioning date: end of 2014 Hodow Np Ibjpfx Aaqjw - Total operating hours: 7,100 h - Working area: 3,000 × 2,000 mm - High pressure pump: Flow Hyplex Prime 30HP 4140 Bar - Condition: fully serviced, ready for immediate operation Test cuts available for interested buyers Included equipment: - Sludge removal system with a separate sludge cart - Abrasive feeder - Special tool for dismantling pump cylinders (FLOW hydraulic wrench) - Multiple spare parts The machine is fully operational, has low operating hours, and is ready for immediate use. An ideal choice for companies seeking a reliable waterjet cutting system with a large working area and a complete set of accessories.

Condition: good (used), Year of construction: 2007, operating hours: 23,504 h, functionality: fully functional, machine/vehicle number: W371, Bystronic 4-head system, including two hydraulic pumps and exchange table Working area: 3,000 x 1,500 mm All heads are operational Including drilling axis Hjdpfx Aaewzwgwjqjw Conversion from scraper conveyor to sludge removal system Further information can be obtained by phone!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10046216, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, table length: 4,000 mm, table width: 2,000 mm, TECHNICAL DETAILS Travel Paths Hjdewy Nm Hspfx Aaqsw X-Axis: 4,000 mm Y-Axis: 2,000 mm Z-Axis: approx. 150 mm Cutting Area Cutting area: 4,000 mm x 2,000 mm Max. cutting pressure: 3,800 bar Control System: Bystronic CNC control MACHINE DETAILS Pump type: High-pressure intensifier pump Drive system: High-speed linear drives Material capability: Cuts nearly all materials Cutting method: Pure water or abrasive waterjet cutting Table type: Stainless steel slat cutting table Weight: 13,000 kg EQUIPMENT High-pressure pump unit Water filtration system Operator console with control panel Safety enclosures and light barriers Operating manuals + software CD-ROMs Documentation

Condition: good (used), Year of construction: 2018, operating hours: 1,200 h, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, table length: 6,000 mm, operating pressure: 4,500 bar, Sunrise Waterjet Cutting SQ6020 Hsdpfjwyi Uwsx Aaqew Fully custom-built model to specification. High-pressure intensifier pump CUX-400H, rated pressure 4,500 bar. Cutting table 6,000 x 2,000 mm over 3 axes. Pneumatic sludge extractor. Abrasive silo. The machine is from December 2018 and was commissioned in February 2019. It is in perfect working condition. This machine cuts absolutely all materials (except tempered glass). Steel cutting capacity over 100 mm thickness. (Cuts stainless steel, aluminum, copper, bronze, stone, tiles, glass, composites, etc.) To fully refurbish, the following is required: cleaning of the cutting tank (approx. €2,800), replacement of the vanes (requires 2 sheets of 3mm 304 stainless steel), and maintenance of the HP pump (approx. €1,500). Dismantling and transport are at the buyer’s expense. Sale due to health issues.

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request Hodpownidhofx Aaqjw - Year: 2003 - Documentation available: Yes - CE marking present: Yes - Operating hours: 4428 - Control type: Siemens - Control: CNC - Travel X: 6500mm - Travel Y: 3300mm - Resonator type: 7XSE-60 - Power: 37.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Year of production: 2013 Working area: 3000x2000 Working hours: 18600 Hodpfxewmcmto Aaqow Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Location: Croatia Parity: EXW Belišće

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,200 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, pressure: 4,000 bar, TECHNICAL DETAILS Working area: 2,000 × 3,000 mm Operating system: Windows 10 Pro (64-bit) High-pressure pump (ECOTRON® 40.37) Flow rate: 3.8 l/min Operating pressure: 400 MPa Oil capacity: 130 l Temperature range: 10 – 35 °C Water consumption: 10 l/min Abrasive dosing system (ALLFI) Tank capacity: approx. 1,400 kg Flow rate: 2 kg/min Hedpfx Aaswcqi Usqjw Weight: 1,500 kg MACHINE DETAILS Dimensions (L × W × H): 1,800 × 800 × 1,150 mm Weight: 1,000 kg Pump operating hours: 1,200 h Electrical connection Connection: 400 V Total power requirement: 37.0 kW

Condition: new, Year of construction: 2025, functionality: fully functional, The EchoJet is the first of its kind, fully enclosed waterjet solution designed to improve operator efficiency while protecting the surrounding environment from water and abrasive. This enclosed, compact design mirrors the traditional machine tool look and feel, with the flexibility to cut virtually any material, and shape. The system touts a unique gantry design that optimizes the work envelope. Highlights include:  Fully integrated enclosure offers quite, clean operation  Unique gantry design offers excellent worktable accessibility while providing fast and precise motion  Leading industry drives, motors, and electrical system coupled with Flow’s ultrahigh-pressure technology  Built-in interior enclosure lights enhance visibility and safety Hsdpfxsv Szxmj Aaqsw  All machine components controlled by convenient roll-around operating console that easily spans the entire work envelope  Industrial PC provides fast and powerful operation in environments up to 55°C with full IP66 spray protection  Laser calibrated at factory and dynamically ball bar tested at customer facility to ensure accuracy standards are validated  One-piece construction and compact size provides ultimate floor space savings, quick installation to get you running quickly, and can easily be moved around later.

Condition: new, Year of construction: 2023, functionality: fully functional, The Mach 100 waterjet cutting system is a reliable and versatile cutting solution that allows you to expand your production with minimal investment. Equipped with the same core Flow components as our premium waterjet cutting systems, the Mach 100 offers you the versatility and added value you need to start your production, backed by comprehensive service and support. Whether you're looking to expand your capacity in series production or prototyping, or enter the waterjet business, the Mach 100 is the key to success. Hedpfx Aaev Szq Asqew

Condition: like new (used), Year of construction: 2011, operating hours: 210 h, functionality: fully functional, BFT Hytron 40.37 Hjdpfx Aaevw Ucvsqew

Condition: excellent (used), Year of construction: 2018, operating hours: 11,066 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 4,150 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet Technology • Produces 2D parts with tight tolerances at high speeds • 5-axis kinematic system -Pump Intensifire UltraJet 60i-S • 4.150 bar, 37 kW (50 PS), 3,8 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module Hodpfx Aaevvmi Eeqsw • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 304.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Hedpfxsvpuvgj Aaqow Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired Hedpfx Asvla U Tjaqew 2.2 Options Included Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: excellent (used), Year of construction: 2011, operating hours: 1,934 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, water pressure: 3,600 bar, TECHNICAL DETAILS Operating hours: 1,900 h X-axis travel: 3,000 mm Hsdevfm T Nopfx Aaqjw Y-axis travel: 1,500 mm Z-axis travel: 200 mm Water pressure: 3,600 bar EQUIPMENT - Two cutting heads for simultaneous processing - Drilling head for piercing holes 2 mm (e.g. MAX plates) - Glue gun for small parts - desludging unit in BIG Pack - Bysoft6 software