MPI-Solutions GbR

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl Mainspindle: Technology:Motorspindle Speed:7.000 rpm Power:16 kW Torque:75 Nm Bar capacity:50 mm Workpiececlamping:Collet chuck, Hainbuch Kombi Axfix Gr. 52 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power:16 kW Torque:75 Nm Gedpfx Ade Akgabjxoui Workpiececlamping:Collet chuck, Hainbuch Kombi Axfix Gr. 52 Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI 25 Tooldrive:8.000 rpm, 1,5 kW, 10 Nm Movement in X/Y/Z:165/70/360 mm Rapid travers in X/Y/Z:30/15/60 m/min Toolcarrier II (X/Y/Z/B): Technology:Turret with 12 stations Taper:VDI 25 Tooldrive:8.000 rpm, 1,5 kW, 10 Nm Movement in X/Y/Z:215/70/740 mm Rapid travers in X/Y/Z:30/15/60 m/min B-Axis:-23,5°/158,5° Toolcarrier III (X/Y/Z): Technology:Turret with 12 stations Taper:VDI 25 Tooldrive:8.000 U/min, 1,5 kW, 10 Nm Movement in X/Y/Z:165/70/360 mm Rapid travers in X/Y/Z:30/15/60 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement Rawmaterialfeed:Barloader, Breuning-Irco ILS-MUK 7012 Finished-part-removal:Part catcher with conveyorbelt Toolholder:Misc. static and driven holders

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 240 mm, turning diameter: 200 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 11,200 W, rotational speed (max.): 6,000 rpm, total height: 1,800 mm, total length: 2,500 mm, total width: 1,700 mm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, type of input current: three-phase, overall weight: 3,000 kg, spindle nose: A2-5, Equipment: USB port, rotational speed infinitely variable, For sale: HAAS ST-10 CNC lathe. Year 2014. 160 BISON chuck, 45mm bar capacity, VDI40 turret, manual tailstock (as shown in the picture), tool probe. Rigid tapping capability. The machine is in very good technical condition, precise, and repeatable. A sleeve is included for the spindle, allowing for the installation of a stop. Included in the set: Standard hard jaws (DKT) Hard jaws for small diameters (DKT) 4 sets of soft jaws (DKT) Approximately 25 sets of soft jaws 25 sets of jaw inserts with screws Guedpfs Akfflex Adxsi For interested parties: For an additional fee: 160 chuck - 3-jaw, pivoting SMW AUTOBLOK for forgings and castings - jaws with carbide inserts for 2 inches - price to be negotiated. The machine is in continuous operation and will be sold without the VDI tool holders visible in the pictures.

Condition: good (used), Year of construction: 1986, - Max. material diameter: 65 mm Gusdpfx Ado Akda Eexei - Spindle speed: 50 - 5,000 rpm - Turret with 8 stations - Pick-off spindle - Back-end machining, 3 axes - 2 cross slides - 2 longitudinal slides - Coolant system - Chip conveyor - Several tool holders - Bar loader INDEX MBF

Condition: good (used), Year of construction: 1986, - Max. material diameter: 65 mm - Spindle speed: 50 - 5,000 rpm - Turret with 8 stations Gsdpfx Ade Akc Txoxjui - Pick-off spindle - Back-end machining, 3 axes - 2 cross slides - 2 longitudinal slides - Coolant system - Chip conveyor - Several tool holders - Bar loader INDEX MBF

Condition: good (used), Year of construction: 1996, - SIEMENS Sinumerik control system - Bar diameter capacity: 60 mm - Max. main spindle speed: 6,000 rpm - Upper turret with 8 tool stations, including a synchronized spindle (all driven) - 2nd turret, lower: 6 tool stations (not driven) - C-axis Guedpe Akczxofx Adxsi - Working range of upper turret: X = 90 mm, Z = 280 mm - Working range of lower turret: X = 81 mm, Z = 80 mm - 2 driven/eccentric tools for rear-end machining - 3 non-driven/centric tools for rear-end machining - Incl. various tool holders - Dimensions L x W x H: 2,700 x 1,400 x 1,800 mm - Weight approx. 2,900 kg + 1,000 kg (bar feeder) Accessories: INDEX MBF bar feeder magazine Chip conveyor

Condition: excellent (used), Year of construction: 2004, - Universal milling machine, vertical head - *CNC FAGOR 8055* – the blue control panel with the full keyboard; this is a very good CNC system and is still well-maintained. Gusdpo Ai Umkofx Adxji - Complete protective cover, very clean - Video of the machine in operation is available, which is a significant advantage for the sale - *Make/Model:* CHALLENGER MB-20 - *Year:* 2004 - *Axes:* 3 axes with lead screws - *Control:* FAGOR 8055 - *Spindle:* NT40 – No. 40 taper - *Spindle speed:* 4,000 rpm - *Power:* 5.5 kW - *Travel:* X 910 x Y 510 x Z 570 mm - *Table:* 1370 x 400 mm, 5 T-slots - *Feed rates:* 7,500 mm/min *Dimensions and weight for packaging:* - *Dimensions:* *L 3000 x W 1240 x H 2800 mm* - *Weight:* *3,000 kg*

Condition: excellent (used), Year of construction: 2024, S45 TCM – SINUMERIK 2-AXIS CNC TURNING MACHINE WITH TAILSTOCK AND POWERED TOOLS, INCLUDING A C-AXIS 11 kW motor power, 0-6300 min-1 speed, linear guide system, digital drive system, direct rotary encoder on the spindle. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. NEW COLOR SCHEME Includes: • 12-position tool turret VDI 30, axial with direction logic for up to 6 powered tool holders! max. motor power 4 kW max. torque 16 Nm speed range: 0-5000 rpm • C-axis for main spindle • Mechanical spindle brake (min. division 0.01°) • Tailstock Tailstock diameter: 60mm Guodpfxe Ai Ttkj Adxei Tailstock stroke: 120mm Morse taper: MK 4 max. tailstock force: 5000N • Headstock, size 45 with spindle connection KK5 (DIN 55026) • Hollow chuck cylinder incl. draw tube • Control system Sinumerik 828D - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 10.4" TFT color monitor - 3D simulation - and more • Machine light • Coolant system • Hydraulic unit • Interface for chip conveyor • Documentation Year of manufacture: 2024 R2L240501

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, number of axes: 3, Horizontal turning machine manufactured in 2012. This DMG NEF 400 features a maximum turning diameter of 350 mm and a distance between centers of 805 mm. It includes a tool turret with 12 stations and a maximum spindle speed of 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the DMG NEF 400 machine we have for sale. Contact us for further details. - Control Unit: Siemens 840D SL- Number of Axes: 3 (X, Z, and C1-axis)- Operating Machine Hours: 1850 h - Spindle Hours: 500 h- Tailstock Travel (Z): 680 mm- Swing Diameter over Bed: 385 mm- Max Swing Diameter over Cross Slide: 350 mm- Max Turning Diameter: 350 mm - Distance Between Centers: 805 mm- Turning Length: 650 mm- Spindle Flange Height from Floor: 1000 - 1010 mm- Spindle Flange Diameter: 170h5 mm- Bar Capacity: 65 mm - Spindle Bore Diameter: 87 mm- Draw Tube Diameter: 67.5 mm - Front Bearing Diameter: 100 mm- Max Spindle Speed: 4,500 rpm - Max Spindle Power (100% / 40% ED): 8 / 11.5 kW- Max Spindle Torque S1 (100% ED): 240 Nm - Max Spindle Torque S6 (40% ED): 340 Nm- Max Workpiece Weight (Chuck): 100 kg- Max Workpiece Weight (Tailstock): 260 kg- Rapid Traverse (X / Z): 30 / 30 m/min- Feed Force X / Z (S1, 100% ED): 4.5 / 6.2 kN- Feed Force X / Z (S6, 40% ED): 6 / 8.5 kN- Ball Screws (X / Z): 32 x 10 mm- Tool Turret: 12 stations- Tool Holder Shank / Mounting: VDI 30 - Tool Shank Size: 20 x 20 mm- Tailstock Taper: MT 4 (MK 4)- Tailstock Max Feed Force: 680 daN- Main Machine Dimensions (L x W x H): 2667.5 x 2215 x 1810 mm- Machine Weight: approx. 3400 kg- Hydraulic Power Unit: 40 L capacity, 1.5 kW pump, 50 bar, 17 L/min- Coolant Tank with Chip Catch Pan: Dimensions 2408 x 799 x 445 mm, Weight 176 kg, Capacity 100 L, Pump 1.28 kW, Pressure 6 bar- Positioning Tolerance Tp (X / Z): 12 / 14 µm - Positioning Uncertainty P (X / Y / Z): 12 / 14 µm- Positioning Deviation P8 (X / Z): 8 / 10 µm - Repeatability / Scatter P5 max (X / Z): 3 / 4 µm- Reversal Error U max (X / Z): 4 µm- Mains Connection: 400 V, 21 kVA, 50 Hz, 24 V DC control voltage- Compressed Air Requirement: 5 - 8 bar • C-Axis • Driven Tools • Hydraulic Tailstock Guedpfxe Ai Sdhj Adxoi • Steady Rest • Tool Measuring System • Absolute Measuring System • Chip Conveyor • Oil / Emulsion Mist SeparatorOptional Equipment / Accessories:Schunk ROTA NCK 250-75 3-jaw chuckSchunk ROTA 2B 250 power chuck, SMW Autoblok collet chuck, full set of collets from 4 mm to 60 mm Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2007, Siemens C 200 – 4D control Turning diameter: 100 mm Turning length: 280 mm 8-position turret with driven tools 6-position turret with driven tools Gusdo Ai H Nqepfx Adxei Spindle speed: 6000 rpm Max. bar capacity: 60 mm Rear drilling unit for 5 stations Knoll chip conveyor Coolant system

Condition: used, Year of construction: 2000, functionality: fully functional, turning length: 350 mm, turning diameter: 170 mm, spindle bore: 54 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 5,500 W, rotational speed (max.): 6,000 rpm, total height: 1,600 mm, total length: 4,100 mm, total width: 1,250 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 10 m/min, type of input current: three-phase, overall weight: 2,800 kg, spindle nose: Asa B5.9 A2/5", Equipment: documentation/manual, rotational speed infinitely variable, COLCHESTER TORNADO A50 Control: FANUC 21i-TA with bar feeder MBF 1000 Year of manufacture: 2000 Specifications Swinging diameter over bed: 410 mm Swinging diameter over cross slide: 300 mm Max. turning diameter: 170 mm Z-axis travel / turning length: 350 mm Rapid traverse Z/X: 10/20 m/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.002 mm Spindle bore: 54 mm Bar capacity: 42 mm Spindle mounting: Asa B5.9 A2/5“ Spindle speed: max. 6000 rpm Spindle power: 5.5 kW Turret: 12 stations VDI 30 Bar loader: Round 6-42 mm, hexagon up to 36 mm Workpiece ejector, machine light, coolant system Fanuc Rigid Tapping Operating manual and complete documentation Dimensions Length with bar loader: 4100 mm Width: 1250 mm Height: 1600 mm Weight: 2800 kg Including accessories approx. 30 pcs. VDI 30 tool holders Hydraulic collet chuck, collets 173E approx. 90 collets (round Ø 3 to Ø 42, various hexagon and square) approx. 20 sets of material guide bushings Ø 6 to 40 Hydraulic 3-jaw chuck Ø 170 Manual 4-jaw chuck Ø 160 approx. 60 pcs. soft top jaws The machine is still in working order and can be demonstrated. Gujdpo Ai Ariofx Adxji The sale is due to retirement. Price includes loading onto a truck.

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 5,000 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,000 mm, overall weight: 5,350 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, number of slots in tool magazine: 12, number of axes: 2, This RAIS T 350 was manufactured in 2019. It features a spindle diameter of 95 mm and a maximum bar diameter of 86 mm. The machine includes a 3-jaw power chuck with a diameter of 315 mm and a 12-station turret for driven tools. If you are looking to get high-quality turning capabilities, consider the RAIS T 350 horizontal turning machine we have for sale. Contact us for further details. - CNC Control: Siemens Sinumerik 840D sl- Operator Panel: 18.5" TFT Color Touch Panel- Sub-Spindle / Counter Spindle: None (Configured with standard tailstock / live center)- Driven Tools: Yes (12-station turret, all driven)- Driven Tool Speed: 5,000 RPM- Tool Interface: BMT 55- Spindle Diameter: 95 mm- Spindle Bore (Through-Hole): 86 mm- Max Bar Diameter: 86 mm- Chuck: Chandox 3-Jaw Power Chuck, 315 mm Diameter- Spindle Motor: Siemens- Tool Measurement: Renishaw HPRA Automatic Tool Presetting Arm- Tailstock: Manual/programmable tailstock with live center / drill chuck- Workpiece Handling: RAIS parts catcher- Mist Extraction: ESTA OILMATIC 800 oil mist separator with mounting assembly- Total Electrical Capacity: 45 kVA- Voltage: 380 V (3 Phases, 50 Hz)Optional Equipment:- Assorted BMT 55 driven and static tool holders (Heimatec, WTO, and Algra)- Filtration System: Knoll fine filtration unit with paper band filter- Chip Removal: Knoll hinge belt chip conveyor Guedpo Airqvsfx Adxji Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 1977, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1977, with a three-jaw chuck, Multifix system, and collet chuck attachment with a set of collets. The machine is in working condition and can be demonstrated under power upon request. Gusdpfs Aih R Uex Adxji

Condition: good (used), Year of construction: 2003, CNC turning machine, manufacturer: INDEX, type: G 200-4, year of manufacture: 2003 Control system: Siemens Chuck diameter: 160 mm Spindle bore: 42 mm Turning diameter, max.: 200 mm Turning length: 445 mm Guedj Aicyzopfx Adxji Chip conveyor, machine, documentation included. Without tailstock. Further data can be found in the data sheet. In good condition.

Condition: good (used), Year of construction: 1996, CNC lathe, manufactured by INDEX, model G200, year of manufacture 1996, with Hydrobar bar feeder. Control system: Siemens. Maximum turning diameter: 200 mm Maximum turning length: 445 mm Gusdpfs Aicyasx Adxsi Spindle bore: 30 mm Further data can be found in the datasheets. Machine documentation available. Machine in good condition.

Condition: used, Year of construction: 2011, operating hours: 39,210 h, functionality: fully functional, spindle bore: 42 mm, spindle speed (max.): 7,000 rpm, travel distance X-axis: 70 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 250 mm, spindle motor power: 19 W, feed length X-axis: 125 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 400 m/min, overall weight: 5,500 kg, spindle nose: A2-5, Equipment: documentation/manual, We are offering this used INDEX C100 CNC turning machine, manufactured in 2011. Manufacturer: INDEX Machine type: C100 Year of manufacture: 2011 Rated voltage: 400 V Rated current: 70 A Short-circuit current I₍CU₎: 50 kA Current I₂: 3.6 kA Maximum pre-fuse: 100 A Rated power: 41 kW Connected power: 49 kVA Guedpfx As Aibutsdxoi Frequency: 50 Hz Control voltage: 24 V DC Machine type: CNC turning machine If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 220 mm, travel distance Z-axis: 650 mm, number of axes: 3, This DMG NEF 400 was manufactured in 2006. It features a maximum spindle speed of 4000 RPM and includes a 12-station tool turret for efficient tool management. The machine is equipped with a manual tailstock and a 3-jaw chuck for versatile clamping. If you are looking to get high-quality turning capabilities, consider the DMG NEF 400 horizontal turning machine we have for sale. Contact us for further details. - Number of Controlled Axes: 3 axes (X, Z, C)- Swing Diameter:- Over Bed: approx. 400 mm- Over Cross Slide: approx. 230 mm- Turning Diameter (max.): approx. 200 - 250 mm- Rotary Axis: C-Axis (main spindle indexing / positioning)- Control Unit: Heidenhain EP 4290 TP (Heidenhain Plus panel)- Spindle Speed (max.): 4000 RPM- Apparent Power: 21 kVA- Nominal Current (Jn max): 31 A- Fuse / Total Current: 35 A / FN1- Operating Voltage: 400 V (50 Hz)- Control Voltage: 230 V / 24 V- Tool Carrier: 12-station tool turret (VDI)- Clamping Device: 3-jaw manual/hydraulic chuck installed Guedpfx Ado Ah Sh Tsxji Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2017, operating hours: 7,349 h, turning length: 800 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, spindle motor power: 25 W, overall weight: 8,800 kg, Year of construction: 2017 CNC controller: Fanuc FS31iB (MAPPS IVS) Capacity Turning length mm: 800 Max. turning diameter mm: ø 320 Bar work capacity mm: 65 Upper turret X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Lower turret X-axis travel mm: 210 Z-axis travel mm: 810 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Gjdj Ah Iq Rjpfx Adxsui Main spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Counter spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: 8" Manufacturer: KITAGAWA Coolant system High-pressure bar: 10 Equipment Chip conveyor Mist collector Chuck foot switch (double) for main and counter spindle Program restart Synchronized tapping Paper band filter Automatic door Robot Automation interface Messenger V4 Working time hours Under power: 7349 Spindle 1: 1370 Rated power kVA: 94 Basic machine dimensions / weight Weight kg: 8800

Condition: good (used), Year of construction: 2011, functionality: fully functional, DMG Gildemeister CNC turning machine MSL 42|7 Year of manufacture: 2011 TECHNICAL DETAILS - Control system: Fanuc 31i - Spindle bore: 46 mm - Max. bar diameter: 42 mm - Main spindle speed (max.): 5,000 rpm - Tool holder positions: 6 - Machine weight: 3,500 kg Bar feeder FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 - 55 mm Bar length: 3200 mm Gjdpfx As Ah Hk Nodxjui Accessories: - FMB bar feeder Turbo 5-55 (bar length up to 3,200 mm) - KSS coolant supply / cooling unit - Chip conveyor

Condition: used, Year of construction: 1997, Index ABC Turning Machine, Main spindle, Bar capacity: max. 52 mm, Main spindle speed: max. 5,000rpm, Main spindle power: up to 20 kW C-axis: available, Sub-spindle, Sub-spindle speed: max. 4,500 rpm, Sub-spindle clamping diameter: max. 42mm, Turrets and live tooling, Turret 1:8 tool stations, Turret 2:6 tool stations, Linear tool carrier: max. 6 tools, Live tool speed: max. 6,000rpm, Live tool drive power: 3.3 kW, Rapid traverse: up to 24m/min, Coolant tank: 210 l, Hydraulic pressure: 90 bar, Dimensions & weight, Machine height: 1,750mm, Footprint: approx. 2.4 m², Machine weight: approx. 2,500kg, Synchronous/sub-spindle, Live tooling, Bar feeder up to Ø 52mm, Chip conveyor, Workpiece discharge via conveyor belt. S/No. 400733 (1997). Country of Origin: Germany Location: These lots are located in Leicester and Coventry, UK. Please see individual lot for dismantling and loading charges. Gusdpo Ah Hb Sofx Adxoi

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,200 kg, Equipment: documentation/manual, # TAKAMAZ SX-07 CNC lathe with FMB bar feeder – manufactured in 2002 For sale is a CNC lathe from the Japanese manufacturer TAKAMAZ, model SX-07, manufactured in 2002. The machine was fully functional until it was decommissioned and was subsequently professionally dismantled and stored. The complete system will be sold including the bar feeder magazine, chip conveyor, extraction system, and accessories. ## Technical data - Manufacturer: TAKAMAZ / Takamatsu Machinery - Model: SX-07 - Year of manufacture: 2002 - Control: FANUC Series 21i-T - Serial number: 940011 - Machine weight: 2,200 kg according to the nameplate - Tool turret - Main and counter spindle ## Operating data according to the control system - Control system switched on: 95,815 hours - Feed time: 23,599 hours - Total part counter: 8,324,144 pieces ## Equipment - FMB Turbo 3-26 bar feeder magazine (year of manufacture unknown) - Chip conveyor - Extraction system - Various tool holders and accessories as shown in the pictures - Operating manual available ## Condition and inspection The machine was fully functional until it was dismantled. It has already been dismantled and stored, but can be powered up for inspection. A complete machining demonstration cannot be guaranteed in the stored condition. Inspection is possible after prior appointment. Godpj Ah Eitefx Adxjui Sale from warehouse. Loading and transport by arrangement.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 5800-0001, RECENT OVERHAUL OF SPINDLES AND SLIDES - IEMCA BOSS 432/32 - MACHINE TO BE DELIVERED; MORE PHOTOS TO FOLLOW SOON. Gujdpfx As Ahyryedxoi

Condition: good (used), Year of construction: 1998, In good technical condition and fully functional. Year of manufacture: 1998 Bar diameter: 42 mm Max. main spindle speed: 7,000 rpm Main spindle power: 13 kW Number of tool stations: 7 + synchronized counter-spindle Axis travels: X: 90 mm Z: 280 mm Rapid traverse: X: 27 m/min Z: 36 m/min Gsdpfx Ado Ahm Atexeui Automatic bar feeder INDEX LMI, year 1998 + accessories. Bar length: 3.2 / 3.7 / 4.2 m Machine weight: approx. 2,500 kg

Condition: used, Year of construction: 2013, turning diameter max. 20 mm Gedpfxs Ahkfye Adxsui turning length max. 80 mm control Fanuc 310is max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,940 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 11,000 W, total height: 2,022 mm, total width: 1,953 mm, overall weight: 3,000 kg, controller manufacturer: FAGOR, controller model: 8055i FL, product length (max.): 4,177 mm, number of axes: 2, Horizontal turning machine manufactured in 2015. This Challenger BNC-1840 (Microturn series) features a robust Fagor CNC control with a manual/power chuck and a disc turret tooling system. It has a machine weight of 3000 kg and is equipped with dual manual electronic handwheels for precise control. If you are looking to get high-quality turning capabilities, consider the Challenger BNC-1840 machine we have for sale. Contact us for further details. Gjdpfx Aj Ahhc Dodxsui - CNC Control: FAGOR 8055i FL (with graphic cycle simulation and Microturn operator interface)- Part Counter: 264- Center Height: 230 mm- Max Turning Length: 1,000 mm- Swing Over Bed: 475 mm- Spindle Speeds: 100 - 4,500 rpm- Spindle Nose Mount: D 1-6 CAMLOCK (direct mount DIN 55029/6)- AC Spindle Motor Power: 7.5 / 11 kW- Drive Power (Total Connected Load): 20 kVA- Nominal Operating Voltage: 400 V- Frequency: 50 Hz- Phase Count: 3 + PE- Full Load Current: 52 A- Max Load Current: 320 A- Short Circuit Protection: 25 kA- Tool Turret: BARUFFALDI TB 160, VDI 40 automatic 8-station tool turret with internal coolant supply (installed in place of standard manual quick-change tool post)- Chuck: SCHUNK ROTA-S-PLUS 250-62/3 (3-jaw wedge bar chuck, Ø 250 mm, 62 mm spindle bore passage) with base jaws and hard reversible top jaws- Tailstock: Manual quill tailstock with clamping lever- Machine Dimensions (L x W x H): 3,030 mm (without chip conveyor) / 4,177 mm (with chip conveyor) x 1,953 mm x 2,022 mm- Optional Equipment: Movable control panel; electronic handwheels (2 manual on apron and 1 portable); heat exchanger; automatic lubrication for headstock, longitudinal, and cross slides; high-pressure coolant system; halogen work lamp; full machine enclosure; Pilz safety relays; Fagor servo drives Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Guodpj Ahfbajfx Adxsi Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.