Sia Melwood

Condition: used, Year of construction: 2015, Plate feed direction: from operator to the left Max. edge thickness: 2 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 40 mm Min. workpiece length: 180 mm Feed speed: 7 m/min Heating-up time: 4 min Njdpfx Afsydqg Iozjkt Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter, diameter 70 mm Infeed fence adjustment: manual Guillotine up to: 2 mm Single edge feeding: possible Gluing: glue contact roller PUR gluing: possible Crosscut saw: Yes Combination unit flush/chamfer/radius: pneumatic adjustment Corner rounding unit: pneumatic adjustment Flat scrapers: Yes, sensor-controlled Aggregate display: on display Control type: PLC line control Operation: touch screen Mobility unit: No Extendable roller support: Yes Protective hood: Yes Weight approx.: 750 kg Extraction diameter: 140 mm Storage location: Customer

Condition: like new (used), pre-milling aggregate granulate glue station maximum working height 60 mm guillotine for trimming edge band from the roll precision edge band trimming unit milling aggregate for trimming edge band excess from the top and bottom of the panel profile scraper flat scraper polishing units machine length 420 cm Nsdpfxeydpp Ie Afzekt year of manufacture 2012 CE mark

Condition: excellent (used), Edgebander SCM ME28T Pre-milling unit Glue application with roller, Pneumatic pre-cut guillotine, Pressure rollers, End-cutting saw, Top and bottom milling unit R1 – R2, Profile scraper Flat scraper, Machine length: 310 cm, Feed speed: 7 m/min, Max workpiece height: 50 mm, Min length: 190 mm Min width: 110 mm Max edge thickness: 2 mm, Used machine, very good condition Nkedpfx Afeydmkiezot Total processed: 21,850 m

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0-200-03-8334, feed rate X-axis: 24 m/min, workpiece height (max.): 60 mm, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Nsdpfx Afjydiymezekt Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: ready for operation (used), functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS: 0.4 to 3 mm Feed speed max.: 14 m/min MACHINE DETAILS Control system: TS 200 touchscreen Nodpfx Ajydircofzjkt EQUIPMENT Adjustable working height Guide for panel infeed Side roller conveyor with free-running rollers for panel support Roller holder plate Glue application unit for EVA hot-melt adhesive with glue pot Edge pressing unit for straight profiles with adjustable pressure rollers End trimming unit with 2 motors and automatic tilt adjustment Milling/trimming unit with 2 adjustable tiltable motors Corner rounding unit with 2 multifunctional motors (milling + rounding) Scraping unit for edge Scraping unit for glue Brush group

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-261-04-5659, feed rate X-axis: 14 m/min, workpiece height (max.): 60 mm, controller model: Power Control Check 20+, grinding spindle motor power: 2,200 W, TECHNICAL DETAILS Panel height: 8 - 60 mm PVC/ABS thickness: 3 mm Pre-scoring depth for wood: up to 8 mm Feed speed: 8 - 14 m/min Nodpfxoydim Te Afzokt MACHINE DETAILS Control unit: Power Control Check 20+ Output per sanding motor: 2.2 kW Supply voltage: 400Y/230 V Phases: 3 Frequency: 50 Hz Full load operating current: max. 23 A Largest motor: 4.5 A Largest heating circuit: 3.1 A EQUIPMENT Electrically adjustable working length via CNC Lateral roller conveyor with idler rollers for panel support Coil holder plate Gluing unit for EVA adhesive with pre-filler and glue tank Edge pressure unit for straight profiles, with CNC-adjustable pressure rollers Indexing group with automatic tilt adjustment Overlapping milling unit with 2 motors Rounding unit with 2 multifunction motors (chamfering + rounding) with CNC automatic adjustment Edge scraper unit Glue scraper unit Brush unit

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0-261-20-5976, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, controller model: POWER CONTROL PC 20+, TECHNICAL DETAILS Panel height: 60 mm PVC-ABS edge thickness: 3 mm Solid wood edge thickness: 12 mm Nedpfsydihdjx Afzekt Feed speed: 20 m/min MACHINE DETAILS Control system: POWER CONTROL PC 20+ Operating current at full load: max. 33 A Largest motor: 9.7 A Largest heating circuit: 2.7 A Fuse: 35 A Frequency: 50 Hz EQUIPMENT Upper motorized rubberized belt Manual infeed guide Anti-adhesive unit Jointing unit Gluing with EVA adhesive Edge support plate End trimming unit with automatic tilt adjustment Offset trimming and corner rounding unit with two motors Linear corner rounding unit with 2 motors Edge scraper unit Glue scraper unit Brushing unit

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 77503, feed rate X-axis: 25 m/min, workpiece height (max.): 60 mm, overall weight: 6,510 kg, controller manufacturer: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil holder magazine with 2 positions and automatic edge change via CNC Nsdpoydidrefx Afzskt - Adhesive unit for EVA hot-melt glue with preheating device and glue pot - Preparation for adhesive unit for PUR glue - Pressure group for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically aligned motors - Edge smoothing unit with 2 swivelling motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with numerical control in automatic adaptation - Anti-stick unit - Adjustable edge scraper unit - Glue-saving unit - Oscillating brush unit - Electronically adjustable working height - Motorized rubber belt with increased pressure - Motorized and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: H/32059, feed rate X-axis: 22 m/min, workpiece height (max.): 50 mm, TECHNICAL DETAILS Panel height: 10 mm to 50 mm Nkodjydibwspfx Afzjt Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Trimming unit with 2 motors Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: new, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0711ST0619, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Maximum material thickness: 3 mm Main trim saw motor power: 0.5 kW Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW Nkjdoyddmnopfx Afzst EQUIPMENT Guillotine for edging material up to 3 mm Teflon-coated glue pot for 3 kg EVA granulate Audio generator Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors

Condition: new, Year of construction: 2008, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 60 mm, overall weight: 750 kg, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 500! TECHNICAL DETAILS Edge thickness: 0.4-5 mm Workpiece height: 8-60 mm Feed speed: 9 m/min Spindle speed of milling unit: 12,000 rpm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Radius scraper unit: R = 2 mm Polishing unit: 2 motors at 1,400 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 1,550 mm Weight: 750 kg FEATURES High-performance chain feed Support for coiled edge material Guillotine blades for cutting coiled edges up to 3 mm Glue roller for EVA granulate from the Teflon-coated glue pot Spring-loaded pressure unit with 1 rubber pressure roller and 2 drive rollers Milling unit 0.27 kW, 100-tooth 24-tooth saw blade Nedpfx Afoyddgzezekt

Condition: new, functionality: fully functional, total length: 2,100 mm, total width: 900 mm, edge thickness (max.): 2 mm, total height: 1,250 mm, plate height: 45 mm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 200! TECHNICAL DETAILS Edge thickness: 0.4 - 2.0 mm Panel height: 10 - 45 mm Feed speed: 5 m/min MACHINE DETAILS Nkodeydc Uwopfx Afzjt Dimensions (L x W x H): 2,100 x 900 x 1,250 mm Required compressed air: 6 bar EQUIPMENT Pneumatic end-cutting guillotine Flush and radius trimming module (a = 15°, R = 2 mm) Teflon glue pot Electric temperature control (20 - 250 °C)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 21090, feed rate X-axis: 25 m/min, overall weight: 3,800 kg, controller manufacturer: SINTRA, Dismantling and loading can be carried out by the seller! TECHNICAL DETAILS Feed speed: 25 m/min 2nd pass: 18 m/min MACHINE DETAILS Control: SINTRA Weight: 3,800 kg Air supply: 7 bar Extraction volume: 30 m/sec EQUIPMENT - CNC-adjustable working height - Infeed fence controlled by CNC - Side fence with idler rollers for panel support - Upper pressure unit with motorized belt - Anti-adhesive unit - Pre-milling unit - Panel edge pre-heating unit with lamps - EVA adhesive application system - EVA glue premelter - Pressure rollers 1 + 5 - End trimming unit with 2 motors and automatic angle adjustment - Rough milling - Fine milling unit with 2 tilting motors and automatic adjustment via CNC servo motors - Multifunction unit (fine milling + corner rounding) with 2 motors and automatic CNC adjustment - R1 R2 edge scraping unit (NC pneumatic positioning) - Groove unit Nsdpfx Asydc Scsfzjkt - Glue scraping unit with anti-adhesive spray system - Polishing unit with 2 motors for panel cleaning

Condition: ready for operation (used), Year of construction: 2019, operating hours: 336 h, functionality: fully functional, total length: 4,764 mm, edge thickness (max.): 8 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edgebanding machine with only 336 operating hours & extensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control system: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edgebander configuration: • Flush trimming/scraper units, radii: 1 mm and 2 mm • Spray unit for final edge finishing • Spray unit for delicate edges • Flat scraper "RC-V" • Brushing unit "SP-V" Nksdpfxeydc Abs Afzjt • "SAVENERGY" kit • "EASY SIZE" adjustment unit • Interior lighting for the cabin and edge banding area • Ceramic infrared lamp • Electronic positioning of pressure rollers • Spare glue pot "SGP" with NC dosing • Additional glue pot "SGP" with NC dosing • Manual feed • "Nesting" tracing rollers • Diamond tools H=64 for pre-milling unit, 2 teeth • Base frame ADDITIONAL EQUIPMENT • SAC TS110 spindle moulder • Wagner EM40-15 lacquering device (year of manufacture 2018) • SCM FS 7 surface planer/thicknesser (year of manufacture 2022) • Aircraft A-K-MAX 15-10 VS screw compressor (year of manufacture 2022) • Schmalz vacuum lifter • Martin T24 spindle moulder with power feed and Aigner fence (year of manufacture 1977) • Concord AFKH surface planer • Kölle F50 spindle moulder incl. power feed • Kölle KFS 40 panel saw (year of manufacture 1980)

Condition: not inspected (used), Year of construction: 2009, operating hours: 29,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, total length: 7,755 mm, workpiece height (max.): 40 mm, working height: 950 mm, controller model: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Nodpfeyc S Hajx Afzokt Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2008, operating hours: 33,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 60 mm, working height: 950 mm, controller model: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness of 22 mm: 55 mm Minimum working width at workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strip max.: 0.4 - 20 mm Edge cross-section, strip max.: 900 mm² Edging material, coil: 0.3 - 3 mm Max. edge cross-section for PVC: 135 mm² Max. edge cross-section for veneer: 100 mm² Max. roll diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Nkedpfsyc Sr Ajx Afzot Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive on feed stop Glue pot lift-off at feed stop Glue pot clamping, workpiece actuated Infeed fence automatically adjustable Infeed lock pneumatically controlled Infeed device with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed for Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data collection Electric height adjustment Fixed stop on left side Workpiece transport system Top pressure Separating agent spray unit Jointing cutter unit, 2 x 3 kW Gluing station A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit with granulate tank and quick-change system Cross-cutting unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi-finishing unit MN21 automatic Finishing unit FA11, with finishing station, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Spare position for additional processing units Note: The machine is sold without consumable tools. Container loading and seaworthy packaging by the seller is not possible.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Single-Sided Edgebander Homag Edgeteq T-200 / Optimat KTD 720 Min. panel height: 10 mm Max. panel height: 55 mm Min. panel length: 180 mm Min. panel width: 30 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Max. feed speed: 9 m/min Coil magazine Gluing system Hot-melt glue pot Control system with touch display Nksdpfx Afsyc Sh Rjzst

Condition: good (used), Year of construction: 2020, functionality: fully functional, Heavy duty edgebander EDGETEQ S-380 (HOMAG) in rich configuration suitable for custom made and series production. Machine is equipped with MULTIRADIUS aggregates (ABS 1mm, 2mm + thin edge) with electronic adjustment from the control panel. Main technical parameters: - feeding speed: 8-18 m/min (max. 14 m/min during rounding) - panel thickness: 10-60 mm Equipment and configuration of the machine: - control panel (color LCD screen) - internal lightning of working area - automatic lubrication of the feeding chain - electronic top pressure adjustment Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter diam. 100 mm) - glue pot with roller (EVA/PUR glue) - pressure rollers (4 pcs) with timed intervention - 2 motor end cutting unit with pneumatic tilting of the blades Nkodpoyc Ntqefx Afzjt - radius trimming unit - 2 motor rounding unit - radius edge scrapers - cleaning spray - glue scrapers - brushes Production year: 2020 Status of the machine: good Availability: cca from April 2026

Condition: excellent (used), Year of construction: 2000, operating hours: 845 h, functionality: fully functional, Machine in top condition (very little use) Machine available calendar week 12/26 Panel thickness: 6 - 45 mm (up to 50 mm with reduced edge cross-section) Nkjdpfjyc Hp Nex Afzot Coiled material: 0.4 to 3 mm Strip material: 0.4 - 8 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 11 m/min 1901 Edge feeding for coil and strip material Guillotine shear: 0.4 - 3 mm 1906 M Adhesive application system for EVA & PUR glue with sensor-controlled nozzle adjustment; heat-up time approx. 4 - 5 min 1913 Pressure unit: first roller driven, two subsequent pressure rollers 1918 End trimming unit 3 x 0.35 kW, swiveling 0–10° 1942 M Multifunctional milling unit 2 x 0.6 kW, pneumatically adjustable for flush trimming, 15° bevel, radius up to 3 mm 1929 Scraper unit for radii up to 3 mm, pneumatically adjustable 1940 Buffing unit Total length: 4130 mm Electrical connection: approx. 5.5 kW Weight: approx. 1250 kg

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Single edge feeder Automatic transport for coil and strip material - Glu Jet GJ 301 adhesive application system Automatic glue height adjustment (sensor nozzle) - Pressure unit 1912-3 pneumatic - End trimming unit 1918 (60 mm) pneumatic - Extraction hoods for end trimming unit - Multifunctional milling unit FR 201 - Corner rounding unit 1832 for edge thickness up to 3 mm - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Buffing unit 1940 Nkjdpfx Afsyczi Dezet - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4–6 mm Feed speed: 10 m/min Total length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0-261-07-5143, edge thickness (max.): 12 mm, The machine is overall in very good condition. An on-site demonstration is not a problem. This machine is still in full operation. Nkedpoycxgajfx Afzet

Condition: excellent (used), SCM K260 EVO edgebander Pre-milling cutters, Glue application with roller, Njdpfx Afjycwgfjzskt Tank features quick-change option Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for finished cut, Top and bottom milling unit R1 – R2, pneumatically adjustable Profile scraper, pneumatically engaged Flat scraper, pneumatic Machine length: 340 cm, Max. workpiece height: 60 mm, Max. edge thickness: 3 mm, Used machine, in very good condition. Inspection possible before purchase. Only 11,500 meters processed.

Condition: used, • Holz Her Auriga 1308 XL FÜ + PU • Compact design - edge thickness 0.4 - 8 mm • Edge-Control PPC 231 touchscreen PLC control • Pre-milling unit for trimming prior to gluing section • Fully automatic edge magazine for both rolls and strips • GLU JET glue application station with cartridge + PU bonding • Glue application via nozzle technology • Workpiece height 6-65 mm • Automatic glue height adjustment • 1912-3 pneumatic pressure unit • 1918 pneumatic end trimming unit for roll and strip material up to 8 mm edge thickness Njdpfxoycq Dwj Afzskt • Pneumatic adjustment for trimming saws from 0-10° angle • 1827 MOT 4 milling unit for flush trimming 8 mm, radius milling, bevel milling - 15° 1827 MOT NC axes controlled via operator panel • 1832 pneumatic corner rounding unit for workpieces up to 3 mm edge thickness in throughfeed • 1929 MOT2 scraping unit for bevels and radii with 2 scraper holders, NC axes controlled via operator panel • Surface scraping unit – finish • Buffing unit - polishing • Spray system at infeed and outfeed • Complete set of tools included • First delivered in 2013 • Machine is FUNCTION TESTED and in TOP CONDITION • Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2009, This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information. • Configuration/Features: • Joining milling • Gluing unit for EVA hot melt adhesive • Pressure zone Nsdjychduepfx Afzskt • Cutting unit • Copy milling • Scrapers • Buffing unit Additional equipment • Workpiece returning system: LIGMATECH

Condition: ready for operation (used), Year of construction: 1995, This LEONHARD KURZ Fürth KTF 70737L was manufactured in 1995. It features a Mikromat stretch control, a fixed stop side on the left, and an insertion table for angular insertion of long cross pieces. It includes two grinding units for straight edges and a KURZ embossing unit with unwinding and winding capabilities. Consider the opportunity to buy this LEONHARD KURZ Fürth KTF 70737L edgebander. Contact us for more information. • Control: Mikromat stretch control • Stop side: Fixed on the left • Grinding: 2 x straight-edge grinding units, overall oscillating • Chamfering: VZK chamfer grinding units for upper and lower chamfer • Note: Free space available Additional equipment • KURZ embossing unit with unwinding and winding unit, incl. 3 hot embossing rollers • Insertion table for angular insertion of long cross pieces • Manually adjustable feed guide with plastic roller strip Nedpfsycg Uljx Afzjkt