LAMMB technology sro

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 167L1131108, feed length X-axis: 1,600 mm, feed length Y-axis: 700 mm, feed length Z-axis: 700 mm, total height: 3,100 mm, total length: 4,800 mm, total width: 3,700 mm, table width: 700 mm, table length: 1,750 mm, overall weight: 11,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase,

Condition: good (used), Year of construction: 2007, X 1,200 Y 800 Z 510mm, table 500mm diam. HSK 63, 20.000Rpm, cooling through spindle 20 bar, ATC 40 pos, Heidenhain TNC 530, weight 16.100kg Ledpfxo Abw Sne Ahajah

Condition: good (used), Year of construction: 2007, operating hours: 9,000 h, functionality: fully functional, total length: 3,200 mm, overall weight: 10,000 kg, The machine is fully functional and available immediately. Lasdpfx Ahe Abbg Noajh

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: FANUC, controller model: Series 0i-MF, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Litz CV1200A was manufactured in 2016. It features an X-axis travel of 1,200 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine includes a table dimension of 1,350 x 600 mm and a maximum table load of approximately 1,000 kg. If you are looking to get high-quality machining capabilities, consider the Litz CV1200A vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 1,350 x 600 mm Lasdps Abaz Eefx Ahaeh • Tool change time (tool-to-tool): 2.0 s • CNC control: frequently equipped with Fanuc Series 0i-MF (LCD screen, Manual Guide) • Rapid traverse (X/Y/Z): 36 / 36 / 24 m/min • Guideways: high-rigidity roller linear guideways for heavy cutting Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2009, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Fanuc Travel: 1200 x 600 x 600 mm Table: 1300 x 600 mm BT 40, 8000 rpm Laodpfxs Aa N Tne Ahash 24-tool changer Weight: 7500 kg

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,267 mm, travel distance Y-axis: 632 mm, travel distance Z-axis: 498 mm, controller manufacturer: FANUC, controller model: 18i-MB, table load: 850 kg, overall weight: 6,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Leadwell MV-50i was manufactured in 2003. It features an X-axis travel of 1,267 mm, Y-axis travel of 632 mm, and Z-axis travel of 498 mm. The machine includes a table size of 1,417 × 607 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the Leadwell MV-50i vertical machining centre we have for sale. Contact us for further details. • Table size: 1,417 × 607 mm • Spindle taper: CAT 40 • Coolant through spindle: Depending on configuration Additional equipment Lajdpfx Aho Aa A Daoaeh • Chip conveyor: Depending on configuration

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 1,270 mm, controller manufacturer: FANUC, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DOOSAN DNM650 was manufactured in 2010. It features a robust weight of 8500 kg and is equipped with a Fanuc Series control system. The machine includes a 4th axis rotary table unit mounted on the main table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM650 vertical machining centre we have for sale. Contact us for further details. - Mains Connection: AC 220 V, 3-Phase, PE, 50/60 Hz- Rated Power: 42.55 kVA- Interrupting Capacity: 5 kA- Full Load Current: 124.30 A- Short Circuit Capacity: 35 kA- Circuit Diagram Version: DM50H00ZA03- Weight: 8500 kg- Control System: Fanuc Series- Additional Equipment: signal stack light, mist extraction ducting system Ljdpfxj Aa Ax Rs Ahasah

Condition: good (used), Year of construction: 2008, functionality: fully functional, Quaser MV 154 PL, Year of manufacture: 2008, Control system: Heidenhain iTNC 530, Travel range X/Y/Z: 1000/530/560 mm, Tool changer: 30-position, SK 40, Air blow-through spindle, Internal cooling system (IKZ): 20 bar, Chip conveyor, 3D measuring probe, Thermal compensation, Ljds Aawnyepfx Ahasah Temperature-controlled oil cooling system, Spindle replaced in 2021.

Condition: used, Year of construction: 2014, x-travel 1600 mm y-travel 820 mm z-travel 700 mm Laedps Aaq Tijfx Ahaeh control Heidenhain iTNC530 weight of the machine ca. 7500 kg

Condition: like new (used), Year of construction: 2008, EUMACH SPINNER MCV 1600 MACHINING CENTER Ledpez Td Unofx Ahasah SELCA S 4045 D CNC YEAR: 2008 WORK TABLE: 1,800 mm x 810 mm TRAVELS: X: 1,600 mm Y: 800 mm Z: 700 mm SPINDLE TAPER: ISO 40 / DIN 69871 SPINDLE SPEED: 10,000 RPM RANDOM TOOL CHANGER: 30 POSITIONS EQUIPPED WITH CHIP CONVEYOR FLYING TOOL CHANGER POWER: 18.5 KW WEIGHT: 15,000 KG

Condition: excellent (used), Year of construction: 2005, operating hours: 61,150 h, functionality: fully functional, machine/vehicle number: 114900009, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: 840D, table width: 800 mm, table length: 1,000 mm, operating hours of spindle: 61,150 h, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, DMG DMC 125U – 5-Axis Machining Centre with 2-Pallet System DMG DMC 125U CNC machining centre for sale, featuring: 5-axis machining 2-pallet system SK50 tool taper 60-position tool magazine Through-tool coolant supply Oil mist separator Collection and Transport Conditions Delivery terms: EXW Veszkény, Hungary – Incoterms® 2020, at the seller’s premises, excluding loading onto the collecting vehicle. The purchase price does not include loading or transport. The buyer is responsible for arranging and paying for any dismantling required for transport, transport preparation, movement within the premises, lifting, cranage, loading, packaging, load securing, transport, insurance and unloading at the destination. All such operations shall be carried out at the buyer’s risk and responsibility, at a time and in a manner agreed with the seller in advance. The buyer shall provide a suitable transport vehicle, appropriate lifting and load-securing equipment, and qualified personnel. Any necessary transport permits, customs clearance and related administrative formalities shall also be arranged and paid for by the buyer. Lodpfxez Snvys Ahaeah

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: FANUC 0i-MF Plus, total height: 3,030 mm, total length: 3,240 mm, total width: 2,550 mm, table width: 600 mm, table length: 1,200 mm, table load: 500 kg, overall weight: 6,990 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15 W, spindle nose: DIN 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Used 3-axis vertical machining center with FANUC CNC Ljdpfez Smdwex Ahajah

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. Laodez R Rf Ajpfx Ahash It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: 840D Solution Line, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. • Table: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Probing interface: Available (probe not specified) • Electrical: 3/PE ~ 400 V, 50/60 Hz; rated current 50 A • Electrical cabinet: Habor Precise Industries heat pipe heat exchanger (Model 7A2) • Drive system: Siemens SIMODRIVE 611 modular drive system Ljdpoz Rzxrjfx Ahajah • Logistics: Crane loading on truck available (~800 EUR) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, controller manufacturer: FANUC, controller model: 21i-MB, total height: 3,100 mm, total width: 2,500 mm, table load: 2,000 kg, overall weight: 13,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, product length (max.): 4,300 mm, number of axes: 3, This 3-axis SPINNER MVC-1600 was manufactured in 2006. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1,800 × 810 mm and a maximum table load of 2,000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC-1600 vertical machining centre we have for sale. Contact us for further details. • Table size: 1,800 × 810 mm • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Electrical supply: 3/PE ~ 400 V, 50/60 Hz • Rated current: 50 A • Machine dimensions: approx. 4.3 × 2.5 × 3.1 m Laedpfoz Rzqnjx Ahaeh • Operational status: dismantled, not under power Additional equipment • E.A.-tronic Super 3 central lubrication unit • Habor heat pipe heat exchanger (Model HPM-35AR) • Coolant hoses/piping system installed Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Wele Awea Machining Center Type AA1165 Fanuc Series 18i-MB CNC Year 2008 Chip Conveyor ✅ Documentation ✅ Ljdpfez N Tf Ijx Ahaoah Video Available ✅ Inspection Possible ✅

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1575 x 584 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 (Showroom machine) • Spindle Nose to Table (max): 32.9 in / 836 mm • Spindle Nose to Table (min): 7.9 in / 201 mm • Spindle Max Torque: 340.0 ft-lbf @ 700 rpm / 460.0 Nm @ 700 rpm • Spindle Drive System: 2-Speed Gearbox • Table Length: 62.0 in / 1575 mm • Table Width: 23.0 in / 584 mm • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • T-Slot Center Distance: 3.15 in / 80 mm • Number of Std T-Slots: 7 • Max Weight on Table (evenly distributed): 4000 lb / 1814 kg • Max Cutting Feedrate: 500 ipm / 12.7 m/min • Rapid Traverse (X, Y, Z): 710 ipm / 18.0 m/min • Max Thrust X: 3400 lbf / 15124 N • Max Thrust Y: 4100 lbf / 18238 N • Max Thrust Z: 5600 lbf / 24910 N • Tool Changer Type: SMTC (Side-Mount Tool Changer) • Tool Capacity: 30+1 • Max Tool Diameter (full): 4.0 in / 102 mm • Max Tool Diameter, Large (adjacent empty): 7.0 in / 178 mm • Max Tool Length (from gage line): 16.00 in / 406 mm • Tool-to-Tool Time (avg): 4.20 s • Chip-to-Chip Time (avg): 6.30 s • Coolant Capacity: 95 gal / 360 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC (70 A Full Load) • Input AC Voltage (3 Phase) - High: 440 VAC (35 A Full Load) • Domestic Shipping Pallet Dimensions: 168.0 in x 102.0 in x 125.0 in / 427 cm x 260 cm x 318 cm • Export Crate Dimensions: 168.0 in x 102.0 in x 130.0 in / 427 cm x 260 cm x 331 cm • Shipping Weight: 16250 lb / 7371.0 kg Additional equipment • Machine vise mounted on T-slot table • Air gun attachment Ljdpfxez Nlyqo Ahasah • Spray container and cleaning brush holder mounted on control arm console Technical Specification Taper Size BT 50

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools Lodpfx Aoz Nfirohaeah - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: I Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 6700L was manufactured in 2021. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700L vertical machining centre we have for sale. Contact us for further details. Lajdsz I S E Nspfx Ahaoh • Display: 15" • Program memory: 2 MB / up to 1,000 programs • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Automatic doors • Robot interface • Tool breakage detection in tool magazine • Ball screw nut cooling • Ethernet connection • Air clamp interface on table • Seat air check • Coolant level sensor • Mist collector interface • Coolant gun • Condition: Used, excellent condition, fully functional and regularly maintained • Quantity: 4 units available Additional equipment • Chip conveyor LNS MH500 (right side) • Belt-type oil skimmer • Vacuum pump Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2020, operating hours: 900 h, functionality: fully functional, NCT304 control (Windows-based, touch screen, USB, 19-inch LCD monitor) Table size: 1750 x 700 mm Max. table load: 1200 kg "T" slots in the table: 18 x 5 x 125 mm Distance between the spindle nose and table surface 135 - 835 mm X travel: 1600 mm Y travel: 700 mm Z travel: 700 mm Taper: SK40 Tool magazine: 16-station, arm type Max. spindle speed: 10000 rpm Drive power: 20 kW Lodpfx Ajz I Sdxehajah Power supply: 22 kVA Dimensions (L x W x H): 4370 x 2915 x 3027 mm Weight: 10000 kgs Accessories, equipment: - Coolant system - CTS (Coolant Through Spindle), 20 bar - Machine feet - Central lubrication system - Signal light - Spindle cooler - Machine documentation The machine is barely used and is in absolutely mint condition.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm A-axis: 360° × 0.001° A-axis speed: 20 rpm Spindle speed: 0–9,000 rpm Speed control: stepless Tool interface: DIN 69871 SK40 Working feed rate: 5–28,000 mm/min Rapid traverse rate X/Y/Z-axis: 28,000 mm/min Table design: Bridge table with 4 sides Table length: 1,800 mm Table width: 113 mm Table load capacity: approx. 150 kg Magazine design: Chain magazine Magazine capacity: 44 Max. tool diameter: approx. 70 mm Max. tool diameter with free adjacent positions: approx. 200 mm Max. tool length: approx. 240 mm Max. tool weight: 5 kg Max. total weight of tool magazine: approx. 200 kg Tool change time: approx. 8 s MACHINE DETAILS Control system: Siemens Sinumerik 810D Total power consumption: 14 kW Laodpfoz Izdhox Ahaoh Dimensions & Weight Dimensions (L x W): approx. 6,500 x 3,500 mm Machine weight: approx. 9,000 kg Operating hours: 19,357 h EQUIPMENT Second milling spindle Exchangeable milling spindle Coolant system (coolant tank: approx. 480 l) Internal cooling External cooling Clefil RBF-E100 unit (coolant pressure: 20 bar) Clamping system Hydraulic clamping options in the machining area Pneumatic clamping options in the machining area Römheld hydraulic unit (max. hydraulic pressure: 500 bar) Additional equipment Chip conveyor Coolant nozzle in the machining area Enclosed work area enclosure according to UVV Automatic measuring probe RWP20.00 Various SK40 tool interfaces Technical documentation Layout plan

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Ljdpfoz Il Rrjx Ahajah Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 2,900 mm, total length: 5,000 mm, total width: 3,000 mm, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle motor power: 15,000 W, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, We are offering a machining center from the manufacturer Ibarmia with a controlled 4th axis/rotary table. The machine is in good condition and can be inspected and tested in our facilities while powered on. Manufacturer: Ibarmia Type: ZV25/L16000 Year of manufacture: 2002 Control: GE Fanuc Series 18i-M Technical data: Travel distances X-Y-Z: 1600x410x410 mm Travel distance B-axis: 360*0.001° Rapid traverse X: 40 m/min Rapid traverse Y-Z: 60 m/min Main spindle: Spindle speed: 15,000 rpm Main spindle power: ISO-SK-40 Tool changer: Number of positions: 24 Machining area: Table dimensions: 850x1250 mm Laodpez Ia U Eefx Ahaeh Internal coolant supply (IKZ) Machine dimensions: 5000x3000x2900 mm Weight: 8,000 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Brand: BRETON Italia Model: XCeeder 1200 RT Type of machine: Vertical CNC machining center, 3 axes Year of construction: 2002 CNC control: SELCA S4045PD Working Capacity X-axis travel: 1,200 mm Y-axis travel: 1,000 mm Z-axis travel: 600 mm Table dimensions: 1,500 × 1,000 mm Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 60,000 mm/min Z-axis: 40,000 mm/min Spindle Maximum spindle speed: 18,000 rpm Spindle taper: HSK-A63 Spindle line cooler Tool Magazine Automatic tool changer (ATC) Capacity: 30 tools Set of HSK-A63 tapers Assorted tooling Measuring Systems Measuring scales on the axes: X Y Z Coolant and Chip Management Coolant collection tank Chip conveyor Washing pumps CTS pump for coolant through the spindle High-pressure CTS system External unit for CTS system Accessories: Ledpfxoz Iakms Ahaoah Coolant collection tank Chip conveyor Washing pumps High-pressure CTS pump through the spindle CTS external unit Scales on the X / Y / Z axes Spindle line cooler Fume extractor No. 2 magnetic tables Set of HSK-A63 tapers Assorted tooling Documentation: Machine manuals Electrical diagrams CE Declaration of Conformity Key Features: Vertical CNC machining center, 3 axes Large working travels: 1,200 × 1,000 × 600 mm High rapid traverse rates up to 60,000 mm/min High-speed spindle up to 18,000 rpm HSK-A63 spindle taper Automatic tool changer with 30 tools Measuring scales on the X, Y, and Z axes High-pressure CTS system Spindle line conditioning Chip conveyor and washing system Fume extractor No. 2 magnetic tables Complete with a set of HSK-A63 tapers and assorted tooling Complete with manuals, electrical diagrams, and CE Declaration

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: 2200180, travel distance X-axis: 1,600 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 20,500 W, The Saeilo Contur KV 1600 is a used vertical machining center, manufactured in 2008 by Kent Industrial in Taiwan and distributed in Germany through Saeilo. With an X-axis travel of 1,600 mm and 815 mm in Y and Z, it is suitable for long plates, housings, and fixture components that can no longer be accommodated on smaller machining centers. It is controlled by a Siemens Sinumerik 840D. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2008 - Control: Siemens Sinumerik 840D - Travel X / Y / Z: 1,600 / 815 / 815 mm - Spindle speed max.: 4,500 rpm - Spindle drive: 15 / 20.5 kW, ball screws - Tool holder: ISO 40 - Tool magazine: 32 positions - Gearbox: ZF two-stage gearbox EQUIPMENT AND ACCESSORIES - Chip conveyor Mayfran LT 200 LS Laedpfez H Uf Njx Ahaoh - Tool holders, partially populated - Drilling and milling tools - Two vices on the table (according to the photos) CONDITION During our inspection on October 1, 2026, the machine was not in operation. Therefore, we are selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Typical applications include plates, housings, molds, and fixtures in mechanical engineering and contract manufacturing. The long X-axis travel also allows for shuttle machining with two setups. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for disassembly, loading, and transport; upon request, we can provide contact details for local freight forwarders. Price upon request. Please feel free to contact us via the contact form.