Anish Spares

Condition: used, mileage: 337,000 km, power: 105 kW (142.76 HP), first registration: 02/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 3,120 mm, loading space width: 1,610 mm, loading space height: 1,750 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, !!!!! ENGINE DAMAGE !!!!! Right-hand stabilizer link damaged !!!!! 2-seater, power steering, 6-speed manual transmission, tachometer, power steering, driver airbag, electric windows, on-board computer, electric exterior mirrors, air conditioning, central locking with remote control, Carrier refrigeration unit down to approx. -18°C, deep freezer, power supply connection, wing doors, right side door, etc. Subject to errors, interim sale and typographical errors. Sale only to businesses and for export. !!!! Fg-40509 !!!! Key code 116 !!!!! Iedey D Dc Rspfx Abgsia

Condition: used, mileage: 243,392 km, power: 103 kW (140.04 HP), first registration: 01/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 12 m³, loading space length: 3,600 mm, loading space width: 1,800 mm, loading space height: 1,930 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Vehicle No. for customer inquiries: 118 ----Additional Features in Equipment * Air conditioning * Cruise control * Rear parking sensors * Navigation system * 270° rear wing doors * Start/Stop automatic ----Other Features: * AdBlue tank * ABS * Airbag * Radio/USB * Bluetooth hands-free system * On-board computer * Truck registration * Particulate filter * Sliding door, right side * Partition wall * Immobilizer * Central locking system * Environmental badge: 4 (Green) * Base color: white * Multifunction steering wheel * 4-season tires Iisdpsy D Dbajfx Abgsa * Euro 6d-TEMP * Upholstery: fabric * Central locking with remote control * Electric windows * Electrically heated side mirrors * Electronic immobilizer * HSN/TSN: 3003/BAM ----Technical Specifications: * Wheelbase: 4,035 mm * Cargo area dimensions: L: 3,600 mm W: 1,800 mm H: 1,930 mm * Payload: 1,082 kg * Tire size: 225/75R16C ----German vehicle! * €10,850 net plus VAT * General inspection/emissions (TÜV) valid until 05/2026 * For export to non-EU or EU countries, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible – please ask us for your individual offer! * We are happy to accept your used vehicle in part exchange!! * Financing/leasing available even in difficult cases * This description serves solely for general vehicle identification and does not constitute a warranty within the meaning of sales law. * No claim to completeness. All information/descriptions/images are non-binding and do not constitute guaranteed characteristics. * We accept no liability for mistakes or obvious errors. * The buyer is obliged to inspect the condition and equipment of the vehicles independently before purchase. * Subject to changes in price, typographical errors, mistakes, and prior sale. * Dear customer, please understand that due to the age and mileage, we prefer to sell this vehicle to business users or dealers. Thank you. * We speak: * Greek / Μιλάμε Ελληνικά Tel: +49.162.6567750 * Russian / Мы говорим на русском Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * Email: * * Internal number: 118

Condition: used, mileage: 27,225 km, power: 121 kW (164.51 HP), number of beds: 4, fuel type: diesel, gearing type: mechanical, color: white, first registration: 02/2023, total length: 7,420 mm, total width: 2,320 mm, total height: 2,950 mm, axle configuration: 2 axles, emission class: euro6, overall weight: 4,000 kg, Year of construction: 2023, Equipment: ABS, air conditioning, bathroom, central locking, electronic stability program (ESP), second-hand vehicle warranty, soot filter, * Engine / Chassis: Citroen Jumper 2.2 l Blue HDI * Power: 121 kW / 165 hp * Transmission: Manual gearbox * Mileage: 27,225 km * Permissible total weight: 4,000 kg * Beds: Drop-down bed, single beds * Seating group: L-shaped lounge * Upholstery: Lecce Melange * Wood decor: Riva Loft ----SPECIAL EQUIPMENT: * Citroen Jumper 2.2 l Blue HDI 121 kW (165 hp) 4,000 kg Maxi chassis * Waste water tank heated by heating coil * Electrically adjustable drop-down bed above the central seating group * Outdoor shower * Automatic satellite dish incl. TV * Bike rack for up to two bicycles * Truma Duo Control (Automatic gas bottle changeover system incl. crash sensor and gas filter set) * 2nd body battery AGM 95 Ah * All-season tires * Alloy wheels with special black finish * Dometic FJX4 2200 roof air conditioning, black * Linnepe 12V gas detector * Prick Stop anti-break-in protection for driver's door * No rental vehicle Bürstner Limited models feature extensive standard equipment including: * 16" light alloy wheels * 90-liter diesel tank * ESP incl. ASR * Intelligent Traction Control * Daytime running lights * Tire repair kit * Tire pressure sensors * Driver and passenger airbags * Dashboard refinement with aluminum applications * Electrically adjustable and heated exterior mirrors * Cup and tablet holder * Instrument cluster with chrome rings * Manual driver's cab air conditioning * Leather steering wheel incl. gear lever * Multifunction steering wheel * Logo-style brake light * Aluminum frame windows * Premium XL body door with central locking * Coupe step * GRP hail protection roof * Anthracite awning with LED lighting * Sun roof with blackout and flyscreen blind * Ventilated overhead lockers * Multi-zone cold foam mattresses for all bed types * Riva Loft furniture decor * L-shaped lounge (except T 727 G) * Roller blinds * Three-burner cooker with glass cover and separate sink Iisdpfxey D Da Ne Abgsa * Capsule holder * Compressor refrigerator * Kitchen side wall panelling * High-performance water pump * Cassette toilet * 95 Ah AGM body battery * Illuminated chest rear panel * Wardrobe lighting * Backlit mirror in bathroom * Indirect lighting for overhead lockers * External combination socket 12 V, 230 V, TV * LED lighting * Charging booster * Power socket in garage * Digital control panel Truma Combi heating (CP Plus) * Truma Combi 6 gas heating with air recirculation * Flat-screen mount * Pioneer multimedia system incl. reversing camera * Etc. ----Affordable financing through CA Bank available, also possible without down payment. Besides selling and renting motorhomes and caravans, we also offer a wide selection of accessories, add-ons, repairs, spare parts, and a camping and leisure shop. Feel free to visit us in Celle, where a large selection of motorhomes and caravans are available for viewing. Our consultants in sales, rental, and workshop departments are happy to assist you. EXPORT SERVICE: Customers from outside Germany are welcome! We look forward to your visit! Your Bürstner Premium Partner directly on the B 214. ----Subject to changes, prior sale, and errors! ----created with SYSCARA

Condition: used, mileage: 83,370 km, power: 96 kW (130.52 HP), number of beds: 4, fuel type: diesel, gearing type: mechanical, color: white, first registration: 03/2016, next inspection (TÜV): 03/2027, total length: 7,490 mm, total width: 2,300 mm, total height: 2,890 mm, axle configuration: 2 axles, overall weight: 3,600 kg, Year of construction: 2016, * Engine / Chassis: Fiat Ducato 2.3 l * Power: 96 kW / 131 HP * Transmission: Manual gearbox * Mileage: 83,370 km * Perm. total weight: 3,600 kg * Bed(s): Drop-down bed, Single beds * Seating area: L-shaped dinette Isdpfjy D Da Aex Abgeia ----SPECIAL EQUIPMENT: * Manual air conditioning * Reversing camera * Radio (1 DIN) * Oven * Refrigerator with separate freezer compartment * Electric drop-down bed * Spacious full bathroom * Satellite system incl. TV * Awning * All-season tires * Rear folding supports * Rear air suspension * Truma Combi E * Timing belt replaced at 66,000 km Attractive financing available through CA Bank, also without down payment subject to credit approval. In addition to sales and rental of motorhomes and caravans, we also offer a large selection of accessories, add-ons, repairs, spare parts, as well as a camping and leisure shop. You are welcome to visit us in Celle, where you will find a wide range of motorhomes and caravans on display. Our consultants for sales, rental, and workshop services are, of course, at your disposal. EXPORT SERVICE: Customers from outside Germany are welcome! We look forward to your visit! Your Bürstner Premium Partner directly on the B 214. ----Subject to change, prior sale, and errors! ----created with SYSCARA

Condition: used, mileage: 25,000 km, power: 140 kW (190.35 HP), number of beds: 2, fuel type: diesel, gearing type: automatic, color: white, first registration: 04/2024, total length: 6,980 mm, total width: 2,220 mm, total height: 2,920 mm, axle configuration: 2 axles, emission class: euro6, overall weight: 3,500 kg, Year of construction: 2024, Equipment: ABS, air conditioning, bathroom, central locking, electronic stability program (ESP), navigation system, second-hand vehicle warranty, soot filter, * Engine / Chassis: Mercedes Sprinter 419 CDI * Power: 140 kW / 190 HP * Transmission: Automatic * Mileage: 25,000 km * Permissible Gross Weight: 3,500 kg * Bed(s): Single beds * Seating Group: Side seating group * Upholstery: Indiana * Wood Decor: Native Bamboo ----SPECIAL EQUIPMENT: Iiodpfx Ajy D Davobgja * Mercedes-Benz Sprinter 3.5 t - 419 CDI - 140 kW/190 HP - Euro VI-E incl. 3,500 kg chassis (Upgrading possible) * 16" alloy wheels (silver) with all-season tires * Cab exterior color: Tenorite Grey (Metallic) * 93 l fuel tank * Seat heating and lumbar support for Mercedes-Benz original seats * Premium TI equipment line (Cruise control incl. multifunction steering wheel buttons, electric parking brake, multifunction steering wheel, reinforced front axle, DAB radio pre-wiring, 9G-TRONIC automatic transmission incl. hold function, MBUX 10.25" multimedia system incl. navigation, voice control, multifunction steering wheel controls, DAB+, touchscreen, and reversing camera, leather steering wheel (for automatic), active distance assistant DISTRONIC PLUS incl. multifunction steering wheel buttons, Mercedes-Benz color display instrument cluster, Mercedes-Benz acoustic package, fully automatic THERMOTRONIC air conditioning, smartphone tray incl. wireless charging function with charge indicator, dashboard charging package with 2 x USB-C ports 5V / 1 x 12V socket, LED high-performance headlights, rain sensor, Wet Wiper System (wipers with integrated washer nozzles)) * Furniture decor: Native Bamboo (Verture S) * Living area: Indiana * Exterior color: Carrara White * Driving Assistance Package (Active Lane Keeping Assist, Attention Assist, High Beam Assist, Traffic Sign Assist, heated windscreen) * Style Package (chrome radiator grille, painted bumpers, add-on parts and radiator grille frame in body color, fog lights with cornering function) * Awning 4.0 m * Automatic SAT antenna incl. TV * Rear folding supports * Fixed tow bar ----Attractive financing available via CA Bank, also possible without down payment, depending on creditworthiness. In addition to sales and rental of motorhomes and caravans, we also offer a large range of accessories, add-ons, repairs, spare parts, as well as a camping and leisure shop. You are also welcome to visit us in Celle, where a large selection of motorhomes and caravans is available for viewing. Our consultants in sales, rental, and workshop are of course at your disposal. EXPORT SERVICE: Customers from outside Germany are welcome! We look forward to your visit! Your Bürstner Premium Partner directly on the B 214. ----Specifications subject to change, prior sale, and errors excepted! ----created with SYSCARA

Condition: new, mileage: 300 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Iiodjy D Dapjpfx Abgea Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single axle. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Iodpey D Daijfx Abgoia Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 300 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: Ijdpey D Dacefx Abgjia ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single axle. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Iijdpey D A U Ssfx Abgoa Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: used, mileage: 490,200 km, power: 302 kW (410.61 HP), first registration: 11/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, R-type long-haul cab CR 20 H Highline with 2 bunks, SCANIA Retarder Type R 4100 D, Original SCANIA stationary air conditioning, automatic climate control, rain sensor, auxiliary heater, electric glass sunroof, external sun visor, premium air-sprung and heated driver’s seat, driver airbag, foldable passenger seat, dual electric windows, electrically adjustable and heated exterior mirrors, roof and side spoilers, ABS, ESP, disc brakes with EBS, emergency brake assistant, ACC – Adaptive Cruise Control, LDW – Scania Lane Departure Warning System, traction control, 12-speed SCANIA transmission GRS 905 R with 2-pedal Opticruise, 625-liter aluminum tank (left), 80-liter AdBlue tank, digital tachograph, H7 headlamps with automatic dipped beam, fog lights integrated in bumper, LED daytime running lights, work lights, 'Exclusive' dashboard trim, on-board computer, Scania Infotainment Premium with color display including steering wheel controls, multi-function leather steering wheel, refrigerator, central locking with remote control, external storage compartments left and right, stainless steel side toolbox (right side), 4-bellow air-suspended rear axle, differential lock on rear axle, rear axle load indicator, wheelbase 3750 mm, technically permitted gross combination weight 60,000 kg, workshop-maintained, good overall condition, GENUINE KILOMETRES (verifiable), Euro 6 engine (SCR Only), low noise, German vehicle with German papers, Not a lowliner or mega tractor unit! Sale to trade customers only! All information provided without guarantee! Errors and prior sale excepted! Iedpfx Aboy D A U Eegoia

Condition: used, mileage: 656,175 km, power: 302 kW (410.61 HP), first registration: 10/2019, fuel type: diesel, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, R410 Automatic transmission Tacho Gen2 SMT2 Refrigeration unit 1x sleeper berth 2x aluminum tanks Leaf/air suspension Ijdpey D A Ufjfx Abgsia Belgian registration Very good condition

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical specifications: Roller diameter: 500 mm Motor: 1.8 kW Connection: 430 V Upper precision guide Lower guide Telescopic blade guard Cast iron bandsaw wheels Cast iron table, tiltable up to 36° With automatic motor brake Blade tension indicator Maximum cutting height: 260 mm Iisdpey D A Tzofx Abgja Maximum cutting width: 480 mm Extraction port: 100 mm Dimensions (L x W x H): 965 x 660 x 1925 mm Weight: 280 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2010, Supper mini mill specs X 406mm Y 305mm Z 254mm . Max speed 10000 RPM . Power 15 HP (11.2 KW) . Taper CAT 40 / BT40 Iijdpfjy D A S Djx Abgja

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 Iiedpfx Abey D A Swsgea EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, number of beds: 4, color: white, first registration: 02/2020, next inspection (TÜV): 03/2026, total length: 6,630 mm, total width: 2,300 mm, overall weight: 1,500 kg, mileage: 10 km, Highlights: * Further Description: Electric mover, air awning, external power socket, ATC (Anti-Trailer Control), external gas connection ---- * We strive to describe the vehicle offered as accurately as possible. However, mistakes can never be completely excluded. Therefore, please speak directly to our sales staff if you place particular emphasis on a specific feature. * Subject to prior sale and errors. ---- Used vehicle: with warranty, Model/Year: 2020, Inspection (TÜV): 03/2026, New TÜV: yes, Internal ID: D0018696, Sleeping areas: Front bed size (1960x1385/1095), Rear bed size (1952x1369/1304), Upholstery: fabric, Previous owners: 1, Additional info: new TÜV, BODY: service hatch, bathroom window, GRP construction, central supply unit, roof window, one-piece entrance door, GRP roof, awning light, blackout and insect protection blinds, full insect protection door, KITCHEN: refrigerator with freezer compartment, 3-burner stove, ELECTRICAL: additional 230 V sockets, external socket, battery charger, additional battery, HEATING/AIR CONDITIONING: hot water boiler, gas heater, air recirculation unit 230 V, GAS: external gas socket, MULTIMEDIA: TV, swiveling TV mount, OTHER: one owner, registration documents, subject to errors and modifications, awning. Iijdpfxey D A Sqs Abgsa

Condition: excellent (used), Year of construction: 2001, operating hours: 30,750 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, injection weight: 278 g, mold height (min.): 350 mm, opening stroke: 700 mm, The Krauss Maffie 200T has done low hours the controller MC4 . Heating zone 4 . Core pulls . very good condition . Iedpey D A Rtefx Abgsia

Condition: good (used), mileage: 137,007 km, power: 118 kW (160.44 HP), first registration: 04/2007, fuel type: diesel, wheelbase: 3,130 mm, fuel: diesel, fuel tank capacity: 140 l, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro4, total width: 2,080 mm, permissible axle load (axle 1): 1,800 kg, permissible axle load (axle 2): 2,800 kg, Year of construction: 2007, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Other options and accessories = - Alarm system - Front work lights - Armrest - Audio controls on the steering wheel - AUX input - Passenger bench seat - Tachometer - Third brake light - Driver airbag - Remote central locking - Tinted glass Isdpfx Aey D A Rajbgsia - Height-adjustable steering wheel - Cabin - Foldable exterior mirrors - Centre armrest - Particulate filter - Radio/CD player - Disc brakes - Headlight leveling - Immobilizer - Tachograph - Anti-theft device - Partition wall with window = Further information = General information Number of doors: 2 Cab: single Technical information Number of cylinders: 4 Engine capacity: 2,953 cc Maximum front axle load: 1,800 kg Maximum rear axle load: 2,800 kg Weights Unladen weight: 2,180 kg Payload: 1,320 kg gross vehicle weight (GVW): 3,500 kg Interior Number of seats: 3 Maintenance, history and condition Periodic Technical Inspection (APK): valid until 07/2026 Technical condition: good Visual condition: good = Company information = Nidro cars Holland is centrally located in the country and is your reliable address for purchasing your car, van, or truck. The price stated is the 'internet take-away price.' For questions or a test drive, please contact us: VIEW OUR COMPLETE STOCK AT All trade-ins possible with us! (Our listings are created with great care, however no rights can be derived from their contents.)

Condition: good (used), Year of construction: 1995, functionality: fully functional, clamping force: 300 kN, screw diameter: 70 mm, clearance between the columns: 630 mm, injection weight: 1,100 g, The Machine In Good Working Order Iedpfx Absy D A N Nsgjia

Condition: good (used), functionality: fully functional, Universal grinder BU 28/1000 Iodpfx Ajy D A N Ajbgeia

Condition: good (used), functionality: fully functional, Plate Rolling Machine XZPP 100/16 Iisdpfx Aboy D A Nvogea Shaft diameter: 100 mm Roll diameter: 450 mm Max. strength of rolled material: 392 MPa Rolling speed: 0-6 m/min Total machine power: 11 kW Machine dimensions (L x W x H): 1570 x 1434 x 1578 mm Machine weight: 3950 kg

Condition: good (used), functionality: fully functional, HACO ERMS 2650 Iodpfx Aboy D A Npsgsia

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Ijdpfx Absy D A Niegoia

Condition: used, Manipulator, lifting assistance device, industrial manipulator, INDEVA E80S3.0 intelligent lifter, used machine. Manufacturer: Scaglia INDEVA S.p.A. (Italy) Type: INDEVA® Intelligent Lifting System / Industrial Manipulator Model: E80S3.0 Year of manufacture: 2004 Maximum load capacity: 80 kg Supply voltage: 230 V Frequency: 50/60 Hz Current consumption: 3.15 A Power rating: 620 VA Control system: Electronic, intelligent (INDEVA IAD system) Design: Industrial lifting/manipulator unit The INDEVA system is an intelligent, weight-compensated lifting device developed for industrial material handling applications. The equipment uses electronic control to detect the operator’s movements and assists accordingly in lifting and positioning the load. This system enables smooth, precise, and safe handling operations while significantly reducing physical strain on the operator. Iedpfx Aey D A Ncjbgeia Applications: Production lines Packaging operations Logistics Material handling Repetitive lifting tasks

Condition: excellent (used), functionality: fully functional, Manufacturer/Type: Wieger 10 / 30 Short description: Guillotine shear Description: Immediately available from location: Guillotine shear Wieger Type 10 / 30 Isdpfxjy D A I Es Abgsia Year of manufacture: 1991 Cutting length: 3100 mm Material thickness: 10 mm Frame throat: 300 mm Electric backgauge: 1000 mm Drive power: 11 kW Weight: 7500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, Technical data: Maximum pressing force Working length between frames Horn length left + right Maximum horn load Total working length Throat depth Table width Ram width Maximum stroke Ram tilt adjustment (Y1/Y2) Rapid approach speed Return speed Working speed (approx.) Maximum distance between table and ram Rear stop (X) adjustment Rear stop (X) adjustment speed Backgauge height adjustment (R) Height adjustment travel of backgauge Backgauge height adjustment speed Adjustment of backgauge fingers (Z1/Z2) Adjustment speed Drive power Required oil filling Space requirements above floor Length: Width: Height (approx.) Weight (approx.) Press control - DNC 74 PS-Hydraulic Tool clamping: HKI/V-2 Lifting aid 1500 lg. with support consoles Tools: A4-T2-B-Sp 63 / A4-T3-M51 Die displacement with counter BLATT 631.00-1 KN mm 3150 3050 mm KN mm mm mm mm mm 3620 350 290 100 250 20 mm Iiedpfx Aboy D A Ixsgja mm/sec. mm/sec. mm/sec. mm 90 . 75 0-8.5 593 0-700 mm mm/sec. 50 mm mm/sec. - mm/sec. - KW 30 1 420 mm mm 3900 2800 mm 3900 29500 Electric-hydraulic. Manufacturer/Type: Wieger 315 / 35 Short description: CNC press brake Description: Immediately available ex site: CNC press brake Wieger Type 315 / 35 Year of manufacture 1991 CNC control Cybelec Weight 28 t