Vdw-Technics

Condition: used, Product Information "Compressed Air Diaphragm Pump" Type/Model: Verder V15 Condition: Used Technical Data Max. Flow Rate: 57 l/min Max. Discharge Pressure: 7 bar Connections Suction and discharge side: 1/2" BSP/NPT Air connection: 1/4" NPT Suction height dry: up to 4.5 m product-contacting: 7.6 m Max. Solids Size: up to 2.5 mm Max. Viscosity: up to 5,000 mPA·s Lrsdjzn Ndrspfx Agpep Dimensions: 250 mm x 200 mm x 270 mm Weight: 4.5 kg

Condition: new, Year of construction: 2022, functionality: fully functional, NEW/UNUSED Mazak PRC Laser Optics & Parts — For Turbo X510 / MYZ1501 CO2 Laser For sale: a full set of brand new laser optics and spare parts, originally purchased for a Mazak LaserPath Turbo X510 (MYZ1501) CO2 laser cutting machine, year 1990, with Mazak L1 control. The parts were installed on the machine but the machine was never actually put into operation — so everything is essentially unused, zero cutting hours. Included in this lot: - 2x Gas Return Tree (short, YZ, 3kW, LH, FH turbine) — PRC ref. A8930721 - 1x Gas Return Knee (FH-blower end, YZ-O/C end) — PRC ref. B8930213 - 1x Gas Return Knee (FH-motor end, YZ-fold end) — PRC ref. B8930214 - 1x O-ring service kit for MYZ1500 laser Lrsdezndy Iepfx Agpsp - 8x Tygon tubing, anode — PRC ref. A8931164 - 4x Tygon tubing, stinger — PRC ref. A8931165 - 2x Mirror — PRC ref. OP-118 - 1x Rear mirror — PRC ref. OP-126 - 1x Output coupler "D" mode — PRC ref. B8930074 - 4x Plasma tube, 18mm outboard — PRC ref. B8930123 - 4x Plasma tube, 18mm inboard — PRC ref. B8930124 All parts are genuine PRC Laser Europe stock (original supplier), purchased new and never run. Also available: the complete donor machine (Mazak LaserPath Turbo X510 CO2 laser, MYZ1501, 1990, Mazak L1 control) can be sold as a whole, including electrical panel, control cabinet, and resonator — if a buyer prefers to take the full system rather than parts only. Open to discussing this option on request. Located in Romania. Buyer arranges shipping/pickup, or can inspect in person.

Year of construction: 2009, condition: used, machine/vehicle number: WW12698, Product Information "Radial Medium-Pressure Fan" Radial Medium-Pressure Fan Type/Model: Elektror RD 64 Condition: Used, very good Technical Data Volume Flow max.: up to 142 m³/min Pressure max.: up to 10,600 Pa (total pressure increase) Motor Power: 1.5 kW Lrodjzm N Nxopfx Agpep Dimensions: approx. 600 x 440 x 720 Weight: approx. 42 kg Inquiry Item: Shipping costs will be provided in an individual quote.

Condition: used, machine/vehicle number: WW12700, Lowara submersible centrifugal pump Type/Model: SVI1607 Condition: Used Technical data: Flow rate Q: 8.8 to 24 m³/h (depending on the operating point) Head H: 119 to 49 m Motor power: 7.5 kW Lredpszm Nhuofx Agpep Speed: 2900 rpm Medium temperature: -10° C to +90° C Immersion length: approx. 488 mm Dimensions (L x W x H): approx. 1130 mm x 500 mm x 300 mm Weight: approx. 90 kg Inquiry item: Shipping costs will be provided in a separate quote.

Condition: used, machine/vehicle number: WW12699, Product information "Oil mist filter Filtermist FX5002" Oil mist filter Filtermist Lodpfx Agszm Itvspjrp Type/Model: FX5002 Condition: Used Technical data Air flow rate: 1675 m³/h (at 50 Hz) Motor: 1.5 kW / 400 V Dimensions (L x W x H): approx. 600 mm x 420 mm x 780 mm Weight: approx. 39 kg Inquiry item! Shipping costs will be provided in a separate quote.

Condition: not inspected (used), 2x Allmatic TITAN 2-L Vises Availability: The collection of the item must be confirmed for either August 11 or August 12, 2026. You will be informed in advance which of the two days is scheduled for you, and this will be coordinated with you. Payment terms: Payment in advance – by bank transfer Internal No.: 175-14 Technical data: Jaw width: 125 mm Max. operating torque: 30 Nm Lrjdpfx Agszm Ipwjpop Max. clamping force: 40 kN Scope of delivery: Two machine vises Dimensions & weights: Installation dimensions L x W x H approx.: 600 x 400 x 200 mm Weight approx.: 90 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►On request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to businesses❗

Condition: not inspected (used), Item: SK 40 Tool Holders Availability: Collection of the item must be confirmed on either August 11 or August 12, 2026. You will be notified in advance which of the two days is scheduled for you, and this will be coordinated with you. Payment Terms: Prepayment - by bank transfer Internal No.: 175-17 Scope of Delivery: Suitable for the Mikron VCE 1000 Pro offered by us, with the corresponding holder for the tool changer, at least 40 SK40 tool holders including existing tools, accompanying documentation, a labeling device (arkograph), and other accessories as shown in the images. Dimensions & Weights: Installation dimensions L x W x H approx.: 1200 x 800 x 500 mm Weight approx.: 200 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional Notes: Lsdpfezm Igisx Agpsrp ►Upon request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold without any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: not inspected (used), Item: SK 40 Tool Holders Availability: The item must be collected on either August 11 or August 12, 2026. We will notify you in advance which of the two dates is scheduled for you and coordinate with you. Ljdpezm H Aisfx Agpsrp Payment terms: Advance payment – via bank transfer Internal No.: 175-20 Scope of delivery: Consisting of approximately 30 tool holders, various parallel supports, a boring head, a collet chuck with various collets, and other accessories as shown in the images. Dimensions & Weights: Installation dimensions L x W x H approx.: 1200 x 800 x 500 mm Weight approx.: 250 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the desired location. ►The quoted price is net plus VAT. ►The goods are sold without any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: not inspected (used), Item: SK 40 Tool Holders Availability: Collection of the item must be confirmed on either August 11th or August 12th, 2026. We will inform you in advance which of these two days is scheduled for you and coordinate this with you. Payment terms: Payment in advance – by bank transfer Internal No.: 175-21 Scope of delivery: Consisting of approximately 30 tool holders, various shims, a boring head, a collet chuck with various collets, and other accessories as shown in the images. Dimensions & Weights: Ljdpfezm Hynex Agperp Installation dimensions L x W x H approx.: 1200 x 800 x 500 mm Weight approx.: 250 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold with exclusion of any warranty. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to businesses❗

Condition: excellent (used), Tailstock for PINACHO Lathe Centre height: 180 mm Cone: CM3 Spindle exit: 160 mm Sole dimensions: Length 210 mm x Width 160 mm Lrodpfxszmxl Ns Agpsp V Spacing: 135 mm In very good condition

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Lodezmw Upjpfx Agperp Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Lodjzmw Ucjpfx Agperp Total height under sole: 1470 mm Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: excellent (used), Manual rotary table Ø 450 mm Total height: 150 mm Base dimensions: Length 580 mm x Depth 500 mm Weight: approx 150 kg Ledpfozmw T Ejx Agpjrp In very good condition

Condition: excellent (used), Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Manufacturer: Ceag, Cooper Safety LED emergency exit sign with 3 pictograms, unused, original packaging -Type: SV EURO 1-3/D -Connection: 230 V -Cardboard dimensions: 360/220/H110 mm Lrodpjzmubyefx Agpsp -Weight: 1.8 kg

Condition: excellent (used), functionality: fully functional, Radius grinding attachment for DECKEL S11 - Ref ISOG : 2601X00 Lrsdszkur Hepfx Agpep

Condition: like new (used), For sale: Ljdpfx Ajzh It Eegpjrp Set of 49 vulcanized pulling clamps, plus a 6-inch A2 tapered mandrel. The set is almost new; some of the clamps have never been used. Price excludes VAT.

Condition: new, 2 pieces = 1 set NSK AXIAL-RADIAL THRUST BALL BEARING 76.2x110x16 76 TAC 110 A DB C11 PN7 A Lrodpfxjzh E Ige Agpjp PRESSURE ANGLE 60° INSTALLATION IN O-ARRANGEMENT

Condition: used, amount 1 Palette Primarily turned parts, shafts, spindles, and tool holders used in mechanical engineering and machining. -> Tool holders — cylindrical holders into which milling cutters, drill bits, or turning tools are clamped. Many have tapered shanks, clamping grooves, or Ljdpfxszhcgge Agporp flanges. -> Shafts and spindles — elongated components, often with mating surfaces, threads, or grooves. They transmit torque or serve as guides. -> Turned parts — precision-machined metal components, usually made of steel, with varying diameters and steps. -> Flanged parts — parts with wide contact surfaces that are bolted together.

Condition: good (used), amount 1 Palette Set of milling and lathe accessories, primarily Deckel-compatible tool holders, arbors, clamping accessories, and gears. -> SK/ISO-style tool holders — various lengths, some with clamping nuts, others with a through-hole for drive pins. -> Special Deckel tool holders — one holder is even labeled “Model Deckel.” -> Cylindrical collet holders — several sizes, neatly sorted in a red holder. -> Reducing sleeves — for adapting different tool shanks. -> Threaded adapters — short, thick adapter pieces with internal threads. -> Toothed drive shafts — several pieces, some with hex heads, some with longitudinal teeth. -> Arbors / milling mandrels — longer shafts with a pin or collar, typically used for milling cutters or disc tools. Lrjdpfxezhcgao Agpsp -> Short centering or guide pins — small cylindrical parts with threads or a press fit. -> Red tool holder block — for six collet holders. -> Green-red machine module — presumably part of a top milling machine (e.g., angle head or accessory holder). Complete package price

Condition: used, amount 1 Palette Milling, drilling, and cutting tools for CNC and conventional machine tools. These include: -> Face mills — large milling heads with multiple indexable inserts, ideal for facing large surfaces. Lredszhcf Nspfx Agpop -> Cylindrical end mills — cylindrical mills with face and peripheral teeth, often used for grooves and contours. -> Disc cutters — thin, round cutters for cutting or for deep grooves. -> Drills — various twist drills for metalworking. -> Gear hobs — gear-like cutters for producing gear teeth. -> Tool shanks (SK/ISO/BT) — the tapered tool holders on which the cutters are mounted. -> Collet chucks — holders for smaller tools, such as drill bits or end mills. -> End mills — smaller cutters with multiple cutting edges for contouring, pocketing, and 3D machining. -> Indexable-insert cutters — cutters with replaceable carbide inserts. -> Circular saw blades — round saw blades for cutting or slotting. -> Adapters and spacers — for adapting different tool holders. Complete package price Complete package price

Condition: excellent (used), functionality: fully functional, Internal article number: 26050 Pneumatics set Manufacturer: Festo Includes, among other things, cylinders, valves, connecting plates, hoses, seals, etc. This pneumatics equipment comes from an educational institution and is in good condition. It was used there for training purposes. Lrjdpfx Aezhai Sogpop

Condition: used, amount 1 Palette Wooden box containing a variety of metal parts. Ljdpezg Nk Nsfx Agpsrp -> Precision steel blocks — cleanly ground, right-angled blocks with holes. They are typically used as stops, spacers, clamping aids, or measuring aids. -> Angle and V-blocks — large, angular pieces with slanted recesses. They are used to securely clamp round or irregular workpieces. -> Clamping plates / perforated strips — long metal strips with many evenly spaced holes. Typically used for flexible fixtures where different parts can be combined. -> Small square blocks with a center hole — presumably spacers, centering aids, or modular components for fixtures. Sorting boxes — contain screws, small parts, or other clamping components. Complete Package Price

Condition: used, amount 1 Palette Wooden crate containing a variety of metal parts. These include: Lsdpfezg Nk Asx Agpjrp -> Precision steel blocks -> Mold inserts / dies -> Semicircular segments / clamping jaws -> Spacers / fitting pieces -> Clamping and jig parts -> Cylindrical and cross-section profiles Complete package price

Condition: used, amount 1 Palette Wooden box containing a variety of metal parts for a Pfauter P 250 S. Included are: -> Various gear sets -> Shafts + bolts -> Bushings + spacer rings -> Shims + clamping pieces Lrodpezgid Aofx Agpsp -> Clamping shafts -> Screws -> Pinions -> Spacer/clamping band -> Centering pins -> Broaching needles + cutting knives + forming tools Complete package price

Condition: excellent (used), Vacuum slot channel / suction channel Manufacturer: Blaschke Length: 18 meters = 59 feet 0.661 inches, 3 x 6 meter aluminum profiles Cross-section: 180 x 180 mm Including 3 vacuum carriages and fan 3 kW 380 volts Various bends and pipe sections Lodpfxozf Aqmo Agpsrp