Zurmühle

Condition: good (used), Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: OMAP, Lead screw and feed screw lathe type 180 -Turning length: 1600 mm -Turning diameter over bed: 410 mm -Turning diameter without bed: 570 mm -Turning diameter over support: 230 mm -Spindle bore: Ø 53 mm -Spindle speeds: 12 - 1650 rpm -Three-jaw chuck: Röhm Ø 250 mm -Tailstock mount: MK3 Nodsz D Tt Hepfx Afuodb -Drive: 2.2 kW -Accessories included, see photos -Dimensions: 2670/900/H1355 mm -Weight: 1460 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 47167, turning diameter over cross slide: 400 mm, turning diameter: 600 mm, turning diameter over bed slide: 400 mm, center height: 310 mm, turning length: 4,000 mm, total length: 5,800 mm, total width: 1,700 mm, total height: 1,740 mm, overall weight: 4,300 kg, Conventional lathe Center distance 4 meters Swing diameter 620 Ndodpjz D D Stsfx Afueb Center height above the carriage 210 Rapid traverse

Condition: used, Year 1989 Center height on the bed: 225 - 250 mm Distance between centers: 1500 mm Maximum turning diameter in the gap: 660 - 710 mm Maximum turning diameter on the bed: 455 - 505 mm Maximum turning diameter on the carriage: 270 - 290 mm Nsdpfx Afez Dwl Tjujdb Fixed steady rest bore diameter: 200 mm Traveling steady rest bore diameter: 130 mm Bed width: 330 mm Gap width: 250 mm Gap width at the carriage: 160 mm Maximum spindle diameter: 140 mm Spindle bore: 105 mm Reduction sleeve for spindle / Morse taper: No. 5 Tailstock Morse taper: No. 5 Speeds and Feeds • Spindle speeds: No. 16 • Speed values: from 23 to 1000 rpm (or 35 to 1500 rpm). • Longitudinal feeds: 0.06 - 0.84 mm/rev. • Transverse feeds: 0.03 - 0.42 mm/rev. Threads • Metric pitches: 0.5 - 28 mm. • Module pitches: 0.25 - 14. • Whitworth: 2 - 112 threads/inch. Motor • Standard power: 7.5 HP. Machine comes with operating and maintenance manual. All technical data provided is indicative and may be subject to change without prior notice; therefore, it should not be considered binding.

Condition: used, Year of construction: 1983, Boehringer DUE 500 lead and feed spindle lathe Condition: Used, geometrically overhauled in 2026 Year of manufacture: 1983 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked and adjusted. A test report according to DIN 8605 is available. During the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data: Center height: 250 mm Distance between centers: 1300 mm Spindle bore: 62 mm Chuck diameter: 300 mm Spindle speed: 2240 min-1 Motor power: 11 kW Space requirement approx.: 4000 x 1525 mm Weight approx.: 4300 kg Equipment: 3-axis digital display, NEW Coolant system Chuck guard with microswitch Emergency stop Roller guard Ndodez A Tt Djpfx Afusb Machine light Geometry report Inquiry item: Transportation costs will be provided in an individual offer.

Condition: used, Colchester Triumph 2000 Gap Bed Centre Lathe with Acu-rite III 2 Axis DRO, Swing Over Bed 400mm Diameter, Distance between Centres 1300mm, 250mm 3 Jaw Chuck, Spindle 25 - 2000rpm, 3 Position QCTP. S/No. 6/0044/28919 Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 12 of Auction 3500 - Ending Wednesday 30th September 2026 at 3pm (UK Time) Ndodpez Aqwcofx Afujb

Condition: good (used), Year of construction: 1979, functionality: fully functional, Lead and Feed Spindle Lathe Manufacturer: WEILER, Type: COMMODOR Year of manufacture: 1979 Technical data Manufacturer: Weiler Type: Commodor Swing over bed: 400 mm Distance between centers: 1000 mm Spindle bore: 50 mm Spindle speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital display • Drill chuck • 3-jaw chuck, manufacturer: Röhm, D200mm • Multifix holder • Additional 3-jaw chuck that is on the machine is not included in the scope of delivery! Njdpfoz Ahuxex Afusdb All information is subject to change without notice. A live demonstration is possible at any time in our showroom.

Condition: excellent (used), Lathe with Nirosta splash guard. Nsdpozzruasfx Afuodb

Condition: used, functionality: fully functional, total length: 225 mm, total width: 100 mm, total height: 130 mm, Fully functional conventional lathe with a large number of accessories! Nodpfx Aezzdqasfusdb

Condition: excellent (used), functionality: fully functional, Distance between centers: 1500 mm Center height: 220 mm Spindle bore: 52 mm Tailstock quill: MK 4 18 speeds: 25 - 2000 rpm Nodpfx Afszyyabeujdb Pole-change motor: 2.9 / 5.9 kW with gap bed bridge

Condition: used, Year of construction: 1992, turning diameter over bed 320 mm turning diameter over slide rest 180 mm turning length 1000 mm turning diameter in the gap 460 mm turning speeds 70 -2000 U/min centre height 160 mm spindle bore 27 mm total power requirement 2,0 KW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,8 x 1,2 x 1,6 m Centre lathe (lead-screw and feed-rod lathe) - 160 mm 3-jaw chuck - Faceplate - Spare jaws Ndodpezyvaqefx Afuob - Quick-change tool post (base unit) - 3 tool holders - 2 steadies - Live centre - Chip tray

Condition: used, Year of construction: 1988, centre distance 1100 mm 840 mm hollow 80 mm ja connected load 18,5 kW digital ja multifix ja weight of the machine ca. 4 t Ndedpfx Afszycrteujb

Condition: used, functionality: fully functional, spindle bore: 100 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, type of input current: three-phase, Manufacturer: Gildemeister Heidenreich&Harbeck Machine type: Centre lathe Condition: functional Centre distance: 2100 mm Swinging diameter over bed: 340 mm Swinging diameter over carriage: 200 mm Spindle bore: 100 mm Spindle speed: 9 – 1800 rpm Motor power: 15 kW Mains voltage: 380 V Ndedpszxpppsfx Afuob Carriage travel: 300 mm Compound slide travel: 140 mm Tailstock travel: ~ 2000 mm Tailstock spindle diameter: 80 mm Tailstock spindle stroke: 150 mm Tailstock mount: MK5 Bed width: 320 mm / 410 mm Digital measuring system: X-axis, Z-axis

Condition: repair required (used), Year of construction: 1969, functionality: not functional, machine/vehicle number: 41526, spindle bore: 95 mm, turning length: 8,000 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 14 rpm, type of input current: three-phase, Manufacturer: Meuser Machine type: Lead screw/feed spindle lathe Condition: Damage to the lamellar clutch Distance between centers: 8000 mm Swinging diameter over bed: 470 mm Swinging diameter over cross slide: 360 mm Spindle bore: 95 mm Spindle speed: 14 - 710 rpm Motor power: 15 kW Supply voltage: 380 V Cross slide travel: 630 mm Top slide travel: 190 mm Tailstock travel: ~8000 mm Njdpjzxpf Rjfx Afusdb Tailstock spindle diameter: - Tailstock spindle stroke: 230 mm Tailstock mounting: MK6 Bed width: 390 mm / 530 mm Digital measuring system: X-axis, Z0-axis

Condition: good (used), *SAG 210 Specifications:* Nsdpfx Afjzxiv Asuedb - Center height: 210 mm - Maximum diameter above the bed: 420 mm - Distance between centers: 1000 mm - Spindle: Camlock D1-6, 52mm bore - 12 speeds, 30 to 2000 rpm - Threading: Metric, Whitworth, Module, DP - all without changing the gear train - 5.5 kW / 400V motor - Weight: ~ 1,650 kg > *GRAZIANO SAG 210 LATHE - Refurbished by CMV Villampuy 1996* > Italian Graziano Tortona SAG 210 parallel lathe, 1000mm distance between centers, 210mm center height. > Refurbished by CMV Villampuy (plate dated 1996), bed ground, complete Norton gearbox. > 400V motor, 52mm bore, metric / Whitworth / module / diametral pitch threading.

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Nodpfx Afjzwggvsusdb Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, L & Z Lathe / DREHMA D 410x1500 / New - Unused / Showroom Machine -CE marking -3-axis digital display -Turning diameter over bed: 410 mm -Turning diameter over cross slide: 225 mm -Turning diameter in the crotch: 580 mm -Turning length: 1500 mm -Spindle bore: 52 mm -Speed range (geared): 45 - 1800 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch etc. -Tailstock MK 4 -Drive power: 3.5 kW -Central lubrication -Electric chuck guard -Chuck guard via steel support -Fixed and traveling steady rest Nsdjzv H Ikopfx Afuodb -Multifix base with inserts -3-jaw chuck 200 mm -4-jaw chuck 250 mm -Faceplate -Coolant system -Work light -Foot brake -Traveling center & drill chuck -Machine feet -Documentation Dimensions: L x W x H 2.2 x 0.1 x 1.6 meters / Weight 1850 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1961, Maximum height: 200 mm Distance between centers: 1000 mm Spindle bore: 52 mm Spindle mounting, short taper size: 6 Taper of the tailstock quill: MK 4 Nedpfxszvw Tko Afuodb 24 spindle speeds: 21 - 1300 rpm Feed rates: 0.03 - 0.88 mm Module threads: 0.5 - 15 module Inch threads: 2 - 48 threads/inch Drive motor: 380 V, approx. 10 kW Space requirement: 2600 x 1000 x 1400 mm Weight, approx.: 2.5 t

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, L & Z Lathe / Bickenbach LE-20-10-S incl. 3-axis digital display -Very well-maintained, original condition from an educational institution -CE marking -Year of manufacture 2008 -Three-axis digital display -Turning diameter 420 mm -Turning diameter over the carriage 250 mm -Turning diameter in the crotch 580 mm -Turning length 1000 mm -Spindle speed range (gearbox) 20 - 2000 rpm Ndodpfx Afszvpxxjuob -Spindle bore 58 mm -Tailstock taper MK 4 / quill travel 130 mm -Röhm 3-jaw chuck 250 mm & quick-change jaws -Fixed steady rest -Multifix base holder & 3x inserts -Coolant system -Folding protective device for tool holder -Electric chuck guard -Foot brake -Swivel machine lamp -Follower (Röhm) -Machine feet -Bed stop -Chip guard -Emergency stop -Operating tool Dimensions: L x W x H 2.1 x 0.8 x 1.7 meters / Weight 1600 kg Errors and omissions excepted.

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 87 mm, turning diameter: 380 mm, turning length: 1,000 mm, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, travel distance X-axis: 190 mm, travel distance Z-axis: 1,090 mm, VICTOR VTURN-26 / 110 – LIVE TOOLING - Manufacturer: Victor - Model: Vturn-26 / 110 - Year: 1998 - Machine Type: CNC Turning Center with Live Tooling - Number of Axes: 3 (X / Z / C) - C-Axis: Included - Live Tooling: 8 Driven Tools - Bar Feeder: Included - X-Axis Travel: Approx. 190 mm - Z-Axis Travel: Approx. 1,090 mm - Maximum Turning Length: Approx. 1,000–1,100 mm - Swing Over Bed: Approx. 520 mm - Maximum Turning Diameter: Approx. 380 mm - Spindle Speed: Up to 3,500 rpm - Spindle Nose: A2-8 - Bar Capacity: Approx. 75 mm - Spindle Bore: Approx. 87 mm - Spindle Motor Power: Approx. 18.5 kW - Turret: Live Tool Turret - Machine Dimensions: Approx. 4,400 × 1,700 × 1,900 mm Ndedpezvfrusfx Afuob - Machine Weight: Approx. 6,000 kg - Bar Feeder: Included

Condition: used, Year of construction: 1974, Technical details: Nodpfxezu Rr Ds Afuedb turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1500 mm center height measured in bed: 250 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 3,05 t dimension machine approx.LxWxH: 2,6 x 1,1 x 1,3 m

Condition: good (used), Year of construction: 1976, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 65 mm, turning diameter: 480 mm, turning length: 1,000 mm, total length: 3,400 mm, total width: 1,000 mm, total height: 1,500 mm, spindle speed (max.): 2,240 rpm, type of input current: AC, overall weight: 3,500 kg, For sale is an L+Z lathe manufactured by VDF Boehringer. The machine is in good condition and can be inspected and tested upon request. Manufacturer: VDF Boehringer Göppingen Type: D 480 Year of manufacture: 1976 Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 280 mm Turning length: 1000 mm Power feed Spindle bore: 65 mm Maximum speed: 2240 rpm Bed width: 310 mm Dimensions (L x W x H): 3400 x 1000 x 1500 mm Weight: approx. 3 tons Includes various Multifix tool holders and accessories. Ndjdpfx Aszu I A Tofusb Free loading onto a truck.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck Nsdezux Eljpfx Afujdb 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: used, Year of construction: 1954, 530 mm serial number 13436 Ndedpfxjztfygs Afuob weight of the machine ca. 1,4 t

Condition: used, Year of construction: 1971, digital ja multifix ja ja documentation ja bed bridge ja good condition ja centre distance 1800 mm Njdpjztfxcsfx Afujdb 530mm serial number 0556 hollow 60 mm weight 3,3 t

Condition: used, Year of construction: 1980, centre distance 1500 mm 3 weight 3 t ja Ndedpfx Afoztfw Sjusb