Aggregate Industries UK Limited

Condition: used, This listing is for a Stuart Scientific SB301 Magnetic Stirrer The unit is in full working condition and is ready for immediate release. Overview & Intended Use The SB301 is a robust, heavy‑duty magnetic stirring device designed for laboratory applications where relatively large volumes of liquid (up to around 30 L of water-equivalent) need to be stirred. It is used in chemistry, biology, environmental labs, or anywhere you need continuous stirring without introducing mechanical agitation (i.e. no overhead stirrer, no impeller). Fsdpfx Ahjxv Ac Do Usgi It emphasizes stable speed control, durability, and strong magnetic coupling (i.e. strong magnetic fields to drive the stir bar reliably even under load

Condition: used, This listing is for a Bibby Scientific HT2 Halogen Hotplate Stirrer The unit is in full working condition and is ready for immediate release Bibby Scientific HT2 Halogen Hot Plate Stirrer Bibby HT2 Bibby Sterlin HT2 HT2 120 Volt a high heat glass top halogen hot plate stirrer Maximum temperature 450C Stirrer speed range 0 to 1100 rpm Heater Twin infra red halogen lamps Heater area (dia) 140 mm Fgjdpsxv Acwofx Ah Usi Dimensions lxwxh 300 x 300 x 100 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Waste wood processing plant with KOMPTECH CRAMBO 5200 E direct shredder and Multistar 2-SE star screen with swivel conveyor, overband magnet, and control cabinets. Technical data: see 'Documents' section (PDF file). Fsdpfx Ajxv Acqsh Usgi

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg It supports simultaneous punching and binding thanks to its combined design Fedpfsxv Ackex Ah Uogi

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, clamping force: 2,600 kN, screw diameter: 55 mm, total length: 6,700 mm, total width: 1,700 mm, total height: 2,300 mm, overall weight: 12,400 kg, Equipment: documentation/manual, We are offering for sale a lightly used NEO-EII Series Hybrid Injection Molding Machine - model NEO.E260Ⅱ-e1100, designed for efficient and precise plastic processing. The machine is fully equipped with high-end features and is CE compliant. Key Features & Specifications: • Voltage: 380V / 50Hz • Servo drive system • Electric plasticizing, clamping, and injection • Hydraulic mold adjustment, ejector, and carriage • KEBA 15” color touch screen control panel • Multilingual interface: Chinese, English, Czech, German • CE certification • Bimetallic screw and barrel (B-type), 55mm diameter • Automatic central lubrication system • 2 air blasters included • Dual hydraulic core pull system (2x MP) • Electrical connections: o 2x 400V/32A – CEE 5-pin o 1x 400V/16A – CEE 5-pin o 2x 230V/10A – Schuko • Energy consumption display on controller • Ceramic heater bands • I/O monitoring display • Memory for 200 mold parameter sets • SSR heating system • Spare parts box including screw tips • Glass water distributor (8 in / 8 out) • Movable hopper • Top color feeder system with potential-free plug & signal • Main power switch 4P 160A • EUROMAP 13 core pull interface (HAN 16A) • EUROMAP 2 platen with screw holes • Water cooling valve • Feeding throat temperature closed-loop control • EUROMAP 67 robot interface • 20-zone hot runner controller *A detailed specification of machine dimensions and parameters is available in the attached technical catalog on page 9. Condition: Lightly Used (Excellent condition, nearly as new) Availability: In Stock – Immediate Delivery Location: České Budějovice Delivery Condition: FCA České Budějovice, CZ Price: 106 500€ without VAT Delivery & commissioning available upon request. Fgjdpfxexv Ab Te Ah Usi

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior Fgedpfx Ahjxv Ab Ho Uji The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Fodpexv Abtefx Ah Uegi Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Fgsdpfexv Abgjx Ah Uoi Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, This listing is for a SAS Super80 Air Sampler The unit is in full working condition and is ready for immediate release. The SAS Super series (by SAS / Bioscience International, also referenced under other distributors) are impaction‑type microbial air samplers. They draw a known volume of air through a sampling head so that airborne microorganisms are impacted onto an agar contact plate (or Petri dish) for subsequent incubation and colony counting. These instruments are commonly used in cleanrooms, pharmaceutical manufacturing, hospitals, and other controlled environments to assess airborne microbial contamination. Good combination of high airflow + relatively compact unit; allows efficient sampling of large volumes in minimal time. Wide usage and long track record (models from this family have been used since the late 1970s/80s) which implies reliability and a mature support ecosystem. Flexible head options (aluminium, stainless steel, resin), choice of plate types (contact plates or standard Petri dishes) in some variants. Strong traceability / data capture features, which are important for regulated environment Fodpfx Ahjxv Abao Uogi

Condition: used, This listing is for a Schott Halogen HT2 Stirrer Hotplate The unit is in full working condition and is ready for immediate release. Key Features & Specifications While exact values for the “HT2” designation are not widely published, the listed SLR Halogen model gives a very good indication of typical performance: Heating surface: glass/ceramic top plate (≈16 cm diameter in one listing). Fodpfsxv Aa Nox Ah Uegi Maximum plate surface temperature: up to ~500 °C. Stirring range: approximately 10 – 1,100 rpm (in one listing). Compact dimensions: one listing shows ~24 × 37 × 9 cm (W×D×H). k Suitable for use with a retort rod.

Condition: used, Lansing Linde Type L10 AC Battery Operated Walk-Behind High Reach Truck, Serial No. W4X375L0085 Capacity 1000kgs, Max Reach 2750mm, Fork Size 1100mm, Battery Charger Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fsdpfx Ahjxv Aa Ae Uegi Lot 3 of Auction 3435

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance Fgodpfxexv Aavs Ah Uei

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, Makino MCD1516-5XA 5 Axis Twin Pallet Horizontal Machining Centre With Makino Professional 3 Control Pallet Dimension 1,000 x 1,000mm (5 'T' Slots). Maximum Pallet Load 2,000kg. Axis Travel 'X'=1,500mm, 'Y'=1,600mm, 'Z'=1,200mm, 'A'= +10°/-100°, 'C'=360°. Rapid Traverse 'X'=12m/min, 'Y'=12m/min, 'Z'=12m/min, 'A'=1 To 360°/min, 'C'=1 To 360°/min. Maximum Cutting Feed 'X'=8,000mm/min, 'Y'=8,000mm/min, 'Z'=8,000mm/min, 'A'=1 To 360°/min, 'C'=1 To 360°/min. Distance From Spindle Centre To Pallet Top -680 To 920mm. Distance From Spindle End To Pallet Centre -500 To 1,100mm. Spindle Speed Range 10-4,000rpm (22kW Motor). Spindle Taper ISO 50. 120 Position ATC. Maximum Tool Ø300mm, Maximum Tool Length 750mm, Maximum Tool Weight 30kg. S/No. 97. NOTE - See Lot Description for Important Information on Final Bids and Equipment Collection. Fsdpfexv Aapox Ah Uogi With Hydroflow Coolant Filtration System (Tank Capacity 3,000Litres), Dual Auger Conveyors To Hydroflow Chip Conveyor, Kanto Seiki MPSD-38--N Oil Chiller, Dual Filtermist FX6200 Mist Extraction Units, 2 Renishaw Spindle Inspection Probes, Quantity Of Toolholders & Tooling, Manuals & Rotary Spin Window. Machine Weight 35,000kg. Note: Needs New Spindle Amplifier Module A06B-6102-H230#520 & Power Supply Module A06B-6087--H130, Cable & Pipe Rack Needs Attention. BIDDING NOTE: All Top Closing Bids received either through Auction or via Make Offer function will be presented to Rolls Royce for final approval. Buyers will be notified by email and/or by Invoice if their bid is successful. COLLECTION NOTE: Due to Rolls Royce Company Policy, ONLY Approved Removal Contractors are Permitted to Operate on this Site. Please See Collection Details for Contact Information.

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Fgodsxv Aaijpfx Ah Uei Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Condition: used, OTO MILLS Complete tube mill 168.7 With top of the range equipments OTO MILLS line, EUROLLS rolling, THERMATOOL welding, MAIR packaging machine, BLISSENBACH internal deburring, etc. COMPLETE Tube Mill 168.7 with: 1. OTO MILLS Entry line 2. OTO MILLS 168.7 Forming and sizing system 3. OTO MILLS Cutoff and runout system 4. Electrical and electronic parts 5. Hydraulic power units 6. EUROLLS Complete sets of tooling & spares 7. THERMATOOL HF welder CFI500 kW 8. FOERSTER Online eddy current 9. COTIMPI End facing unit | 6m to 12m length 10. COTIMPI 280 Bar hydro testing unit 11. FOERSTER Offline eddy current: Main bed with drive unit; Testing devices 12. MAIR Automatic packaging machine – Mps Rh200/D/6/Sl 13. BLISSENBACH Tube inside scarfing system – Tube Range I.D. 45 To 165mm Tube diameter: 60,3 – 168,2 mm Square sections: 50x50 – 140x140 mm Rectangular sections: 60x40 – 160x100 mm Thickness: 2,0 – 7,1 mm Tube length: 3 - 12 m Speed: 90 m/min Entry line: OTO MILLS Forming and sizing system: OTO MILLS 168.7 Cutoff and runout system: OTO MILLS Complete sets of tooling & spares: EUROLLS HF Welder: THERMATOOL 500 kW Online eddy current: FOERSTER End facing unit: COTIMPI 6m to 12m length Fedpfxjxv Aacj Ah Uegi Bar hydro testing unit: COTIMPI 280 Offline eddy current: FOERSTER Automatic packaging machine: MAIR Tube inside scarfing system: BLISSENBACH | Tube Range I.D. 45 To 165mm

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, pipe diameter (max.): 168 mm, bending angle (max.): 190 °, overall weight: 32,000 kg, total height: 2,450 mm, Tube diameter: 168.3 x 11 mm Tube insertion length: 6000 mm Max. bending radius: 700 mm Control system: Siemens 840 D Min. bending radius: 80 mm Max. bending angle +/-: 190° Dimensions (L/W/H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU Fgodpfxjxvz U Se Ah Usi - PLC: Siemens Simatic S7 - Electrical connection: 400V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tools are available: Tube Ø 48.3 mm; radius 105 mm Tube Ø 60.3 mm; radius 120 mm Tube Ø 63.5 mm; radius 150 mm Tube Ø 76.1 mm; radius 190 mm Tube Ø 88.9 mm; radius 222 mm Tube Ø 114.3 mm; radius 285 mm Tube Ø 139.7 mm; radius 350 mm Tube Ø 141.3 mm; radius 700 mm Tube Ø 168.3 mm; radius 420 mm There were a few mandrels with direct engravings indicating their specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following mandrel outer diameters were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package has an estimated value of approx. €150,000.

Year of construction: 1993, condition: used, This listing is for a Abbott 3531 Centrifuge Fedpfx Ahjxvz U Eo Uegi Listing: Abbott 3531 Centrifuge Quantity: 1.0

Condition: new, functionality: fully functional, Year of construction: 2025, At FABO, we design and install stationary type stone crushing and screening plants tailored to meet our customers’ specific requirements. Fgedpfexvz Urjx Ah Uji The production capacity of our stationary plants varies between 100 and 1000 tons per hour. Crushing & Screening Plant with 250–350 TPH Capacity: • TBX-35 / Vibrating Feeder Bunker – 1 unit • TE-1430 / Intermediate Screen (1400x3000 mm – 2 decks) – 1 unit • PDK-130 / Primary Impact Crusher – 1 unit • TE-2060 / Washing Screen (2000x6000 mm – 3 decks) – 1 unit • TK-100 / Tertiary Crusher – 1 unit • TE-2060 / Vibrating Screen (2000x6000 mm – 3 decks) – 1 unit • Hydraulic Unit for TK-100 • Hydraulic Unit for PDK-130 • Conveyor Belt System (widths: 1000 mm, 800 mm, 650 mm) • Control Cabin, Electrical Panel, Control Panel, and Automation System All our products are manufactured with great care and come with a 1-year warranty. Installation and Operator Training are FREE of charge! FOR MORE INFORMATION, PLEASE CONTACT US!

Condition: excellent (used), Year of construction: 2004, grinding width: 250 mm, working width: 250 mm, grinding height: 100 mm, Double-sided brush sanding machine / profile sanding machine Manufacturer: Quickwood Model: QL 3 Year of manufacture: 2004 Texturing and sanding machine, double-sided operation, equipped with a total of 6 brush units. Machine suitable for integration into production lines due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from below, each 1.5 kW, frequency controlled, suitable for texturing and sanding 2x brush units from above, each 0.75 kW, frequency controlled, suitable for fine sanding Pneumatically controlled pressure rollers for workpiece guidance and stabilization Fedpfsxvz Uljx Ah Uegi Feed rate steplessly adjustable, approx. 5 - 25 m/min Extraction connections: 150 mm Dimensions approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Condition: used, Year of construction: 2007, Doosan ACE-HM630 Horizontal Twin Pallet Machining Centre. Serial No. HM630262 (08-2007) with Fanuc Series 18i-MB Control, Pallet Size, 630mm x 630mm, Travel X/Y/Z = 1000/800/850mm, Full B Axis, 40 Position ATC, Spindle Taper ISO50, High Pressure Coolant, Filtermist Location: These lots are located in Middlesborough, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fgedpfx Ahjxvz Ufe Uji

Condition: good (used), Year of construction: 2007, Mori Seiki NL2000SY/500 CNC Twin Spindle Multitasking Lathe With DMG MSX-850III Control & LNS Quick Load Barfeeder Maximum Swing Over Bed Ø923.8mm. Maximum Swing Over Cross Slide Ø755mm Maximum Turning Ø356mm. Maximum Turning Length 510mm. Maximum Bar Capacity Ø65mm. Axis Travel 'X'=260mm, 'Z'=590mm, 'Y'=±50mm, 'C'=0.001°(Minimum Increment), 'B'=624mm. Main Spindle With Hainbuch Collet Chuck (Main Spindle), Maximum Spindle Speed 5,000rpm (15kW Motor), Spindle Nose A2-6. Sub Spindle With ATS Workholding Collet Chuck, Maximum Spindle Speed 6,000rpm (11kW Motor), Spindle Nose A2-5. 12 Position Turret (12 Positions Driven). Maximum Driven Tool Speed 6,000rpm (5.5kW Motor). LNS Quick Load Servo 80 Barfeeder Length 2,000mm. S/No. NL201GH2033 (2007). Fedpfxsxvz T Us Ah Ujgi With 10bar Coolant System, Chip Conveyor, Workpiece Unloader, Workpiece Conveyor, 2 Renishaw RP3 Tool Setting Arms, Foot Switches, Daikin Inverter Oil Chiller, Filtermist FX4002 Mist Extraction Unit, Signal Tower, Bar Feeder Liners & Manuals. Overall Dimensions L2,6955 x W2,000 x H2,120mm. Weight 5,800kg.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Fgodpfxjxvz T Ie Ah Uji Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: used, mileage: 297,500 km, power: 103 kW (140.04 HP), fuel type: diesel, wheelbase: 4,080 mm, first registration: 06/2007, emission class: euro4, Year of construction: 2007, Equipment: ABS, central locking, trailer coupling, = Additional options and equipment = - Front electric windows - Electrically adjustable exterior mirrors - Radio/CD player = Further information = Technical details Number of cylinders: 4 Engine displacement: 2,953 cc Maximum front axle load: 1,850 kg Maximum rear axle load: 2,060 kg Dimensions Width: 201 cm Weights Unladen weight: 2,550 kg Payload: 950 kg Gross vehicle weight: 3,500 kg Maintenance APK (technical inspection): valid until 09/2026 Fodpexvz Tzefx Ah Usgi Further information Please contact Gert Woudenberg for more details.

Condition: good (used), Year of construction: 2000, center height: 150 mm, workpiece weight (max.): 80 kg, grinding length: 1,200 mm, grinding wheel diameter: 400 mm, grinding diameter: 300 mm, incl. internal grinding device and second external grinding unit Fjdpoxvz Thjfx Ah Uogi

Condition: good (used), Year of construction: 2010, Matsuura MAM72-35V PC32 5 Axis Multi Pallet Loading Vertical Machining Centre With G-Tech 30i Control Fodpfoxvz Tbsx Ah Uegi Maximum Component Dimension Ø350 x 240mm High. Maximum Pallet Load 60kg. Maximum Workpiece Dimension Ø350mm x 300mm High. Axis Travel 'X'=550mm, 'Y'=440mm, 'Z'=580mm, 'B'= +65/-125°, 'C'=360°. Rapid Traverse 'X,Y,Z'=60m/min, 'B'=50rpm, 'C'=100rpm. Maximum Maxia Spindle Speed 20,000rpm (11/15kW Motor). Spindle Taper BT40. 240 Position ATC. Maximum Tool Ø80mm (Ø150mm Non Adjacent Tool). Maximum Tool Length 260mm. Maximum Tool Weight 8kg. Tool Changing Time Tool to Tool 1.7sec. S/No. 18082 (2010). With Renishaw NC4 Laser Tool Measure and Breakage Detection Probe, Renishaw Spindle Inspection Probe interfaces, Auger To FSE Chip Conveyor, Filtermist FX4000 Mist Extraction Unit, SMC IDF8E Air Dryer, Daikin AKZ567 Oil Cooler, FSE Through Coolant System, Axis Scale Feedback, Visiport Spin Window, Signal Tower, Oil Skimmer, Wash Gun & Manuals. Note: Tooling Not Included. Note: Spindle Drive Needs Attention, Spindle Seems Free Running, Possibly Motor Needs Inspection.