Mvautoexport

Condition: new, functionality: fully functional, Single-Stage Rotary Vane Vacuum Pump designed as a roughing/foreline pump for Liquid Chromatography-Mass Spectrometry (LC/MS) systems, • Manufacturer: Agilent Technologies (Agilent S.p.A., Via F.lli Varian 54, 10040 Leinì Torino, Italy) • Product Name: MS 120 RVP (Rotary Vane Pump) • Model / Part Number: X3702-64000 • Serial Number: IT1811N105 • Manufacturing Date: 2018-04 (April 2018) • Voltage Input: 200–240 Vac • Frequency: 50–60 Hz • Max Power Rating: 3000 VA Gsdpfx Ame Akc Rvj Eobw • Fuse Rating: T 15A-250V (Two 15A time-delay fuses) • Country of Origin: Made in Italy • Regulatory Compliance: CE Mark, CSA Certified (US/C, File 177303), RoHS 40-year symbol, WEEE compliant • QC Sticker Note: Passed quality control inspection on 26-04-18 (VLM) Technical & Performance Specifications According to the Agilent MS120 Datasheet, this unit operates with the following mechanical parameters: • Nominal Pumping Speed: Up to 156 m³/h (120 m³/h effective capacity at 5 mbar) • Ultimate Partial Pressure: ≤ 0.07 mbar (≤ 0.2 mbar total pressure with gas ballast) • Inlet / Exhaust Connections: DN40 ISO-KF (Inlet) / DN25 ISO-KF (Exhaust) • Fluid Type & Capacity: 1.8 Liters of Agilent AVF 60 Gold synthetic vacuum oil • Water Vapor Tolerance: 15 mbar (1000 g/h pumping capacity) • Acoustic Noise Level: 60 ± 1 dB(A) (housed inside an integrated quiet enclosure) • Dimensions (W × H × L): 516 mm × 539 mm × 750 mm • Weight: 100 kg (approx. 220 lbs) Brand new never used. Please check out our other listings as well.

Condition: used, mileage: 405,563 km, power: 235 kW (319.51 HP), first registration: 06/2007, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,630 mm, fuel: diesel, color: green, gearing type: mechanical, number of gears: 16, emission class: euro4, suspension: steel, Equipment: electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 10.520 cc Drivetrain Drive: Wheel Engine type: MAN D2066 LF Axle configuration Tyre size: 315/80R22.5 Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 11.020 kg Carrying capacity: 14.980 kg GVW: 26.000 kg Functional Godpe Akc Rrsfx Am Eobw Make of bodywork: AJK = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, mileage: 342,817 km, power: 199 kW (270.56 HP), first registration: 06/2006, fuel type: diesel, tire size: 315/70r22,5, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 8, emission class: euro4, suspension: steel-air, loading space volume: 13 m³, Equipment: electric window regulation, General information Applicable material: Fuel Drivetrain Drive: Wheel Make of engine: Renault Axle configuration Tyre size: 315/70r22,5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Weights Empty weight: 7.320 kg Carrying capacity: 11.680 kg GVW: 19.000 kg Functional Make of bodywork: MAGYAR Number of compartments: 3 Gsdpe Akc Rnjfx Am Ejbw = Additional options and accessories = - PTO

Condition: used, axle configuration: 2 axles, first registration: 06/1995, loading space length: 7,400 mm, loading space width: 2,280 mm, loading space height: 1,400 mm, suspension: air, tire size: 385/65r22,5, wheelbase: 1,320 mm, Tyre size: 385/65r22,5 Suspension: air suspension Drive: Wheel Empty weight: 8.040 kg Carrying capacity: 23.460 kg Gedpfx Aj Akc Rkom Eobw GVW: 31.500 kg Make of bodywork: LANGENDORF Tipper: Back

Condition: good (used), A complete and updated ULMA Miniload AS/RS system that maximizes storage density and picking efficiency across approximately 450 m². The system is currently undergoing professional dismantling in Barcelona, offering the next owner a unique opportunity for rapid delivery and significantly reduced lead times at a fraction of the original price. This automated miniload system from ULMA offers a proven and high-performance total solution for compact box handling and rapid order picking. The system has been in full operation with updated software until the dismantling and combines a 9-meter-high racking structure with an integrated conveyor system and mezzanine floor. With an original investment value of approximately 1.2 million euros, the system represents a rare business opportunity for companies looking to scale up their level of automation without long lead times or new production costs. As the dismantling is already underway, the system is immediately ready for packing, transport, and rapid integration into a new facility. Benefits: Rapid access & delivery: The dismantling process has already begun on-site – minimizing lead time. Modern software & operational status: The system has been running in production until dismantling with fully updated software. Maximum space optimization: Accommodates approximately 5,000 boxes in a compact footprint of 450 m². The system is available immediately. Manufacturer: ULMA Handling Systems Number of picking stations: 2 Number of cranes: 1 Footprint: 450 m² Height: 9,000 mm Gedpfx Ao Akc N Ujm Eebw Maximum weight per box: 30 kg Number of boxes: Approx. 5,000

Condition: new, Year of construction: 2026, CORMAK RO20 Manual Pallet Stretch Wrapper Godo Akc N Rspfx Am Ejbw The CORMAK RO20 is a manual pallet wrapper designed to secure palletized goods using stretch film. It facilitates the preparation of cartons, bulk packaging, and other loads for storage and transport. The stretch film helps keep individual items together, reducing load movement during logistics operations. Wrapping is performed directly around the pallet, without the need to place it on a rotating wrapping platform. The operator guides the machine around the stationary load, gradually applying stretch film to successive sections of the goods. Compared to traditional manual wrapping using only a roll of stretch film, the device makes it easier to guide the film at the appropriate height and reduces the need to manually support the roll during operation. Key Benefits - Pallet wrapping without moving the pallet – the wheeled design allows the wrapper to be brought directly to the prepared load. This reduces additional pallet truck movements between the order picking area and the wrapping station. - Control over the number of film layers – manual operation allows the number of wraps to be adjusted according to the arrangement of the goods. The operator can apply additional layers around the lower part of the pallet or in areas requiring extra protection. - Adjustable film dispensing height of 40–1370 mm – adjusting the position of the lower part of the film roll allows the film dispensing level to be adapted to the section of the load being wrapped. This makes it easier to start wrapping close to the pallet base and move upwards to secure packages stacked at higher levels. - More convenient stretch film handling – the film roll is mounted on the wrapper, eliminating the need for the operator to hold its weight by hand. Adjustable roll positioning reduces the need to bend down or manually lift the roll when wrapping different levels of the load. - Suitable for multiple packing stations – a single wrapper can be used in different areas of the warehouse, making it a practical solution for order picking across several zones and varying shipping volumes. Applications in Warehouses and Shipping Areas The CORMAK RO20 is suitable for preparing palletized loads for storage, warehouse dispatch, and transport. The adjustable film dispensing height makes it easier to secure packages stacked at different levels, while manual operation allows the number of film layers to be adapted to the characteristics of the load. This solution is useful for both individual pallets and regular order preparation for shipment. The device is effective for wrapping goods arranged in various configurations. The operator can begin wrapping from the lower sections of the load, then adjust the film dispensing height to secure successive layers of packaging. This allows the wrapping process to be adapted to the actual arrangement of products on the pallet. Technical Specifications – CORMAK RO20 Parameter Specification Model CORMAK RO20 Wrapper type Manual, wheeled Operating method Operator-guided around the pallet Adjustment range of the lower part of the film roll 40–1370 mm Height 2035 mm Width 490 mm Length 900 mm Weight 31 kg

Condition: used, functionality: fully functional, machine/vehicle number: 16205528, Year of construction: 2020, operating hours: 1,170 h, load capacity: 2,500 kg, lifting height: 3,600 mm, fuel type: diesel, motor manufacturer: Yanmar, gearing type: automatic, DGUV certified until: 05/2027, Equipment: 4th hydraulic function, UVV, adjustable boom, all wheel drive, cabin, head guard, lighting, retractable fork, sideshift, For sale is a Terberg TKL-M-3x3-4w reach truck. The truck is in very good condition and ready for immediate use. Gbedpfx Ao Akc N Hjm Esw Type: TKL-M-3x3-4w Operating hours: 1170h Factory number: 16205528 UVV inspection valid until: 05/2027 Load capacity: 2500 kg Lifting height: 3600 mm Drive: all-wheel drive Forks: 4-way function Side shift Hydraulic supports Work lights, front Work lights, rear Rotating beacon Protective roof Power steering Offer subject to change, errors and omissions excepted, and prior sale reserved. Financing possible upon request. We will also gladly arrange customs clearance for you. You can reach us at 0170/7299477. Opening hours: Mon-Fri 8-4 pm or by appointment. Price is NET/negotiable. An invoice with VAT will be issued upon sale. Location of the vehicle: Im Gewerbepark 11 99441 Umpferstedt

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, operating hours: 2,779 h, axle configuration: 4x4, power: 55 kW (74.78 HP), fuel type: diesel, maximum speed: 40 km/h, color: red, empty load weight: 2,775 kg, overall weight: 4,700 kg, number of seats: 1, number of cylinders: 4, displacement volume: 2,482 cm³, total length: 3,866 mm, total width: 1,950 mm, motor manufacturer: KOHLER, total height: 2,308 mm, gearing type: hydrostat, number of previous owners: 1, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, power assisted steering, Lof. Tractor/implement carrier: + Sauerburger + Grip4-75 S + Registered: 06/12/2017 + Kohler diesel engine, 2482cc; 75 hp + Hydrostatic, fast/slow; max. speed 40 km/h + Front and rear lift + Front and rear hydraulics + Side shift + Front PTO + All-wheel drive / differential lock + All-wheel steering + Radio + Air conditioning + 3866mm x 1950mm x 2308mm (l x w x h) + Unladen weight: 2,775 kg; permissible GVW: 4,700 kg + Municipal vehicle, first owner ACCIDENT / ROLLOVER: + Rear left axle housing broken (rudimentarily welded) + All-wheel steering currently not functioning + Tractor running in limp-home mode + Various parts bent / broken (see pictures) + Tires/rims do not match Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale! Gbodpfxs Akc Nuj Am Eow

Condition: new, Year of construction: 2026, CORMAK DSA1000 Workshop Crane with 230 V Electric Hoist The CORMAK DSA1000 is a workshop crane equipped with a 230 V electric hoist. The unit is designed for lifting and positioning machine parts, components, and materials during workshop, servicing, assembly, and loading operations. The electric hoist motor winds the cable onto the drum, eliminating the need for the operator to manually operate the mechanism when lifting loads with the crane. The option of mounting the crane on a vehicle or trailer extends its applications to mobile loading and servicing operations. The DSA1000 assists in lifting parts, equipment, and materials directly beside a vehicle, making it easier to prepare loads for transport and unload them at their destination. Key Benefits - Electric hoist drive – winds the cable onto the drum without the need for manual crank operation, reducing operator effort when lifting parts and components with the crane. - Increased hoist lifting capacity with pulley block – using a pulley block allows loads of up to 1000 kg to be lifted at a speed of 5 m/min, making it easier to handle heavier components. - Faster operation without pulley block – with loads of up to 500 kg, the lifting speed reaches 10 m/min, improving efficiency when lifting lighter components. - Vehicle or trailer mounting – enables the crane to be used for loading and unloading materials, machine parts, and equipment at various work locations. Lifting Capacity and Speed With and Without a Pulley Block The CORMAK DSA1000 is equipped with an electric hoist offering two operating configurations. Using a pulley block increases the permissible lifting capacity of the mechanism, while operation without a pulley block provides a higher lifting speed. This allows the operating mode to be adapted to the weight of the load and the nature of the task. With a pulley block, the hoist can lift loads of up to 1000 kg at a speed of 5 m/min. This configuration facilitates the handling of heavier machine parts, mechanical components, and materials requiring greater lifting force. Without a pulley block, the permissible lifting capacity is 500 kg, while the lifting speed increases to 10 m/min. This configuration speeds up the lifting of lighter components during assembly, repairs, and preparation of materials for loading. The pulley block is a practical advantage of the hoist, as it allows a higher lifting capacity at the expense of operating speed. The two configurations make it possible to adjust the mechanism's parameters to the type of load being handled, while the electric drive reduces operator effort during everyday workshop and loading operations. Technical Specifications – CORMAK DSA1000 Parameter Specification Gbodpj Akc Nqefx Am Eew Model CORMAK DSA1000 Type Workshop crane with electric hoist Hoist power supply 230 V Hoist lifting capacity with pulley block 1000 kg Lifting speed with pulley block 5 m/min Hoist lifting capacity without pulley block 500 kg Lifting speed without pulley block 10 m/min Hoist motor power 1800 W Hoist dimensions 170 × 265 × 470 mm

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Gsdpfx As Akc Nmsm Esbw

Condition: good (used), functionality: fully functional, mileage: 552,064 km, empty load weight: 8,419 kg, maximum load weight: 16,481 kg, overall weight: 24,900 kg, axle configuration: 6x2, Year of construction: 2018, Manufacturer: Iveco Type: Stralis 510 6x2 Gbedpe Akc Nfsfx Am Ejw Year: 2018 Unladen weight: 8,419 kg Payload: 16,481 kg Gross vehicle weight: 24,900 kg Mileage: 552,064 km Emission standard: Euro 6 Air-assisted leaf spring suspension

Condition: used, axle configuration: 2 axles, first registration: 11/2009, suspension: air, tire size: 425/65R22.5, wheelbase: 1,300 mm, Applicable material: Concrete Tyre size: 425/65R22.5 Suspension: air suspension Drive: Wheel Gjdpfx Ams Akc Nbo Ejbw GVW: 33.000 kg Make of bodywork: DE BUF

Condition: used, mileage: 255,386 km, power: 375 kW (509.86 HP), first registration: 03/2021, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Equipment: air conditioning, electric window regulation, navigation system, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Drivetrain Drive: Wheel Engine type: MAN D2676LF76 Axle configuration Suspension: leaf suspension Front tyre size: 385/65R22.5 Rear axle 1: Tyre size: 315/80R22.5; Double wheels Rear axle 2: Tyre size: 315/80R22.5; Double wheels Weights Empty weight: 12.840 kg Carrying capacity: 13.160 kg GVW: 26.000 kg Functional Make of bodywork: HIAB = Additional options and accessories = - PTO - Tipper hydraulics Gbodpfs Akc I Tsx Am Eew

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. Gedpfx Ae Akc I Nom Eebw - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw power chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: used, mileage: 480,125 km, power: 368 kW (500.34 HP), first registration: 07/2018, fuel type: diesel, tire size: 385/65r22,5, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, brakes: intarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, electric window regulation, navigation system, spoiler, Front axle: Tyre size: 385/65r22,5; Suspension: leaf suspension Rear axle: Tyre size: 315/80r22,5; Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Gjdpfs Akc Izox Am Eebw GVW: 19.000 kg Make of engine: MAN = Additional options and accessories = - PTO - Roof spoiler - Tipper hydraulics

Condition: new, Year of construction: 2026, CORMAK DSD500 Workshop Crane with 24 V Electric Winch The CORMAK DSD500 is a workshop crane equipped with a 24 V electric winch. The unit is designed for lifting, lowering, and positioning mechanical parts, components, and materials during servicing, assembly, and loading operations. The electric winch motor winds the cable onto the drum, eliminating the need to operate the mechanism manually. The adjustable boom allows the reach to be adapted to the load position and available working space. The crane is suitable for both workshop applications and mobile servicing operations. The option of mounting it on a vehicle or trailer extends its functionality to loading and unloading parts, tools, and equipment directly beside the vehicle. The 24 V winch power supply provides a practical solution for applications using an electrical system with this voltage. Key Benefits of the CORMAK DSD500 Workshop Crane - High electric winch pulling capacity – up to 1361 kg on the first cable layer at a speed of 1.5 m/min. The electric drive assists in lifting heavy parts and components while maintaining the permissible lifting capacity of the crane structure. - Adjustable boom reach of 760–1500 mm – allows the distance between the lifting point and the crane column to be adjusted. A shorter reach provides a higher lifting capacity, while a longer reach facilitates access to components positioned farther from the crane base. - Electric cable winding – the 1000 W motor reduces the need for manual effort, making it easier to lift and lower components during repairs, assembly, and loading operations. - Vehicle or trailer mounting – enables the crane to be used for loading and unloading parts, tools, and materials directly beside a vehicle, expanding its applications beyond the workshop. - Compact 24 V electric winch – with dimensions of 105 × 106 × 310 mm and a weight of 7 kg, the mechanism combines high pulling capacity with compact dimensions, making it a practical component of the crane. Adjustable Crane Boom and 24 V Electric Winch Capabilities The CORMAK DSD500 workshop crane features an adjustable boom length of 1180–1680 mm, providing a horizontal reach of 760–1500 mm. The overall structure height ranges from 1220 to 2140 mm. This design makes it easier to adjust the hook position to the component being lifted, the height of the workstation, and the available space around the crane. Technical Specifications – CORMAK DSD500 Parameter Specification Maximum crane lifting capacity – shortest reach 500 kg Crane lifting capacity – intermediate reach 250 kg Crane lifting capacity – maximum reach 100 kg Structure height 1220–2140 mm Horizontal boom reach 760–1500 mm Boom length 1180–1680 mm Base dimensions 215 × 215 mm Base bolt spacing 170 mm Main column height 1160 mm Electric Winch Technical Specifications Parameter Specification Model Electric DSD500 Winch power supply 24 V Winch pulling capacity without pulley block – first cable layer 1361 kg Cable pulling speed – first cable layer 1.5 m/min Winch pulling capacity without pulley block – fifth cable layer 620 kg Cable pulling speed – fifth cable layer 12 m/min Winch motor power 1000 W Godo Akc Iwspfx Am Esbw Winch dimensions 105 × 106 × 310 mm Winch weight 7 kg

Condition: used, Year of construction: 2017, Spindle speed range: 12000 1/MIN Spindle motor power: 22.4 kw Gsdpfs Akc Ihsx Am Eobw X-AXIS Movement: 1270 mm Y-AXIS Movement: 508 mm Z-AXIS Movement: 635 mm Table: 1321 x 495 mm Distance table to spindle nose 742 mm ISO 40 ATC 30 + 1 positions Chip conveyor High pressure through spindle 20 bar 4th axis preparation The machine is available for inspection and test run at our stock!

Condition: new, Unused pump unit with switchgear and accessories, intended for an infrastructure project. The complete lot consists of five pallets. The unit includes, among other things: - 2 Grundfos pumps, type SE1.100.100.40.4.51D.B., each 4 kW. - 2 Grundfos base elbows DN100. - Piping and fittings, including DN100, DN150, and DN200, and HDPE Ø160 mm. - 2 check valves DN150. - 1 gate valve DN150 with extension spindle and operating key. - 3 floats. - 2 lifting chains of 500 kg each, approximately 7 meters long, with lifting eyes. - 4 guide tubes of 2 inch, each approximately 5.3 meters long. - 2 Grundfos guide tube holders of 2 inch. - Various suspension, fastening, and mounting materials. Godpfj Akc H Sox Am Eobw This pump unit is offered via an online auction. Lot number: 9784-1 Opening bid: € 10 View the auction page for the complete lot specifications, photos, auction terms and conditions, and information about collection and possible transport by an external carrier.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_202500025, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Gbedps Akc H Iefx Am Ejw Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!

Condition: new, Year of construction: 2026, The CORMAK BS320SA is an automatic metal band saw designed for batch cutting of steel pipes, bars, and profiles. Automatic material feeding, hydraulic clamping, and a programmable cutting cycle reduce the need for manual intervention between successive operations. The operator sets the required cutting length and number of pieces on the control panel, and the machine performs the programmed operating sequence. This solution streamlines the production of repetitive batches of material, particularly in manufacturing plants and workshops processing large quantities of identical components. The feeding accuracy of ±0.2 mm and 300 mm feeding stroke ensure repeatable material positioning before cutting. Another advantage is the ability to perform straight and angled cuts at angles of up to 60°, expanding the machine's applications in the preparation of steel structural components. The 2.2 kW main motor, variable-frequency drive with stepless blade speed adjustment, and cooling system allow cutting conditions to be adapted to the type of material being processed. Key Advantages of the CORMAK BS320SA Automatic Band Saw - Automatic material feeding – eliminates the need to manually advance successive sections of material, improving efficiency when producing repetitive batches of components. - Feeding accuracy of ±0.2 mm – supports precise material positioning and reduces variations caused by manual length measurement. - 300 mm automatic feeding stroke – allows material to be advanced through successive feeder cycles, facilitating the execution of programmed cutting jobs. - Automatic cutting cycle – includes material feeding, clamping, cutting, and saw arm return, reducing repetitive operator tasks. - Hydraulic vice and saw arm control – automatic material clamping and controlled movement of the cutting assembly streamline the cutting cycle. - Programmable cutting length and quantity – enables the production of batches of identical components according to manufacturing requirements. - Variable-frequency drive with stepless blade speed adjustment – allows cutting parameters to be adapted to the type of metal being processed and the characteristics of its cross-section. Gbedpo Akc Hyefx Am Eow - Angle cutting up to 60° – enables the preparation of pipe and profile ends for structural, welded, and assembly connections. - Stable construction and cooling system – the machine's weight of 450 kg provides a solid base for the cutting assembly, while the 0.04 kW coolant pump helps dissipate heat from the cutting zone. Technical Specifications – CORMAK BS320SA Parameter Specification Saw blade dimensions 2680 × 27 × 0.9 mm Blade tensioning Mechanical (manual) Saw arm descent adjustment Stepless – hydraulic cylinder Vice base height 950 mm Saw wheel diameter 300 mm Power supply 3-phase, 400 V Main motor power 2.2 kW Coolant pump motor power 0.04 kW Material feeding accuracy ±0.2 mm Automatic feeding stroke 300 mm Conveyor length 2450 mm Dimensions 2000 × 860 × 1500 (1900*) mm Weight 450 kg Machine height with the saw arm fully raised.

Condition: good (used), ABB 3HAC029818-001 ABB Type Designation: 55x40x30 Gbedpfo Akc Hrox Am Ejw Catalog Description: DSQC 663 Drive Unit

Condition: like new (used), ABB Main Computer 3HAC025097-001 DSQC639 Gsdj Akc Hnspfx Am Esbw

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Kodak Magnus 400 II S – Thermal CtP System B2, manufactured in 2010 Gbjdpfe Akc Hkex Am Esw For sale is a Kodak Magnus 400 II S thermal CtP system in very good condition with only approximately 35,000 exposed printing plates. Equipment and technical data: * Kodak Magnus 400 II S, manufactured in 2010 * B2 thermal CtP system * 6-page thermal imaging unit * Performance: up to 14–17 plates/hour, depending on the plate type * Prinergy EVO RTPO workflow * Includes computer with software (RIP) * Multi-cassette unit (MCU), fully automatic * Automatic removal of interleaving paper * 4 punching heads (Heidelberg) * 3 magazine drawers * Conveyor for Magnus 400 II * Plateslider Magnus 400 * Stacker 860 * Machine number: M4I2622 The system is in very good condition and is ideal for printing companies looking for reliable and automated printing plate exposure with extensive features.

Condition: used, functionality: unexamined, Year of construction: 2005, machine/vehicle number: AE103003, next inspection (TÜV): 02/2027, Articulated boom lift from Haulotte. Gjdpfo Akc Hgex Am Eebw

Condition: like new (used), fuel type: diesel, Year of construction: 2023, FIAT DOBLÒ, 5-SEATER, DECEMBER 2023, DIESEL 1.5 ENGINE, 100 HP, AIR CONDITIONING, CARPLAY, STEERING WHEEL CONTROLS, CRUISE CONTROL, DOUBLE SLIDING SIDE DOOR, 187,000 KM, SERVICED, 1-YEAR WARRANTY, FINANCING AVAILABLE. Gjdj Akc E Hspfx Am Eobw