M. Koeleman

Condition: used, Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Machine No.: A05036-02 Year of manufacture: 2006 Machine type: Eccentric press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Ram adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected power: 100 kW Bedpfozrz Ecsx Aaiewr Weight: 47,000 kg Draw cushion: No Condition: Used Machine is leaking hydraulic oil Several leaks are present in the hydraulic system Tension pins for the ram adjustment have been deactivated due to the hydraulic leaks Sold without conveyor system Videos available upon request Location: Freiburg

Condition: used, Manufacturer: Hylatechnik Paul Chrubasik GmbH Type: HSSP 300-3-XA4 Machine type: Hydraulic press Year of manufacture: 2000 Condition: used Press force: 3,000 kN Press force: 300 t Stroke: 300 mm Maximum installation height: 800 mm Bodpfxezrz D Ss Aaiewr Table area: 2,000 × 1,550 mm Ram area: 2,000 × 1,540 mm Front opening: 2,000 mm Side opening: 1,050 mm Table height: 800 mm Rapid traverse: 340 mm/s Working speed 1: 32.5 mm/s Working speed 2: 19.5 mm/s Retraction: 340 mm/s Maximum working pressure: 280 bar Drive power: 75 kW Power supply: 400 V Frequency: 50 Hz Machine weight: approx. 38,500 kg Hydraulic oil tank: approx. 2,000 l Pulling cushion: no Equipment: Complete DREHER strip system DREHER strip unwinder DREHER strip feeder DREHER strip conveyor system Hydraulic die cushion with parallel movement Hydraulic roll blocks Tool changing consoles Siemens SIMATIC control panel Note: The system is currently running at a slow speed but has no significant damage. We will gladly send you videos of the machine in operation upon request.

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. Bjdpfezrz Dxex Aaiewr We will gladly provide videos of the system in operation upon request.

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00631, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2015.11. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2015.11 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Bwsdpfxezrz Dfe Aaisr Weight (kg): 540   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2015.10 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00632, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2700 Prime manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2700 Prime Model Number: KR210R2700 Year of Manufacture Robot: 2016.11   Payload (kg): 210 Reach (mm): 2696 Repeatability (mm): Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1111   Controller: KRC 4 Bjdezrz A Uspfx Aaiswr Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00634, load capacity: 210 kg, arm reach: 2,696 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2700 Extra manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2700 Extra Model Number: KR210R2700 Year of Manufacture Robot: 2016.11   Payload (kg): 210 Reach (mm): 2696 Repeatability (mm): Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1068   Controller: KRC 4 Bwjdpszrz A Iefx Aaier Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: R-00635, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA manufactured in 2017.02. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR360 R2830 Model Number: KR Fortec Year of Manufacture Robot: 2017.02   Payload (kg): 360 Bwedpfx Ajzrz Azjaior Reach (mm): 2826 Controlled Axes: 6 Installation Type: Floor Weight (kg): 2385   Controller: KRC 4 Year of Manufacture Cabinet: 2017.02 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00636, load capacity: 210 kg, arm reach: 2,900 mm, controller manufacturer: KRC 4, teach pendant manufacturer: KCP 4, Refurbished KUKA KR210R2900 Prime K manufactured in 2016.11. The robot comes with an KRC 4 controller including iPendant.   Brand: KUKA Model: KR210R2900 Prime K Model Number: KR210R2900 Year of Manufacture Robot: 2016.11   Payload (kg): 210 Bsdpfx Aaszrz Aujiewr Reach (mm): 2900 Repeatability (mm): Controlled Axes: 6-axis Installation Type: Floor Weight (kg): 1180   Controller: KRC 4 Year of Manufacture Cabinet: 2016.11 RCC Length (m): 7   Teach Pendant: KCP 4 Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2021, machine/vehicle number: R-00644, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC R-2000iC/165F manufactured in 2021.12. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/165F Model Number: A05B-1333-B201 Year of Manufacture Robot: 2021.12 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Bwedpozrz Anjfx Aaisr Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2021.12 RCC Length (m): 14   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Automatic bandsaw AMADA HFA 400 W (Year of manufacture: 2016) Cutting capacity: Round material: diameter 420 mm Square material: 400 x 400 mm Feed length: 5 - 470 mm Multiple feed length: up to 9999 mm Chip conveyor Drive power: 5.5 kW Saw blade speed: 15 - 90 m/min, infinitely adjustable Piece counter Weight: 2200 kg *The saw is in very good condition and fully functional.* Bwedpfx Aaszrz Aheijr

Condition: used, mileage: 309,450 km, power: 338 kW (459.55 HP), first registration: 05/2024, fuel type: diesel, overall weight: 26,000 kg, tire size: 315/70 R22,5, axle configuration: 3 axles, wheelbase: 4,950 mm, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Scania Approved, color: White, permissible total weight: 26000 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , 3rd axle: , seats: fabric, interior color: anthracite, air suspension, lift axle, retarder, electronic braking system EBS, electronic stability program ESP, automatic climate control, adaptive cruise control ACC, LED headlights, headlight cleaning system, automatic headlights, headlight range adjustment, hands-free Bluetooth system, rain sensor, adjustable steering column, sunroof, roof spoiler, fog lights, electrically adjustable and heated exterior mirrors, curb mirrors, wide-angle mirrors, tire pressure monitoring system, immobilizer, wind deflectors, axle load indicator, work lights, hill start assist, LED daytime running lights, connection plug 1x15-pin, gliding function, cornering light, telematics system, EGR, SCR, non-binding offer, subject to errors and prior sale. Image may not match the offer. Bsdpfx Aaszrz Abeiowr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, STC-Ref:G-791-0205 Plockmatic 61 Pro ,Year: 2010 equipped with: - brochure finisher Plockmatic 61 Pro - brochure fomat A4 + A5 - 2 stitching heads Bwjdpszrzz Rjfx Aaisr - Folder/press folder

Condition: used, Year of construction: 2021, total length: 7,800 mm, - Max. Arbeitshöhe Straße: 14,10 m - Max. Arbeitshöhe Maschine stehend Schiene: 14,40 m - Max. Arbeitshöhe bei Fahrt Schiene: 12,90 m - Max. Plattformhöhe Straße: 12,10 m - Max. Plattformhöhe Maschine stehend Schiene 12,40 m - Max. Plattformhöhe bei Fahrt Schiene 10,90 m - Max. seitliche Reichweite Straße 9,30 m - Max. seitliche Reichweite Maschine stehend 9,30 m - Max. seitliche Reichweite bei Fahrt Schiene Bwsdpfxszrzzws Aaior - Max. Traglast Arbeitskorb 400 kg - Drehbereich 180 Grad - Steuerung: proportional - Max. Fahrgeschwindigkeit Straße: 4 km/h - Max. Fahrgeschwindigkeit Schiene 18 km/h - Korbdrehung: 90 Grad

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,300 mm, - Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar Bwsdpfxjzrzzqs Aaijr - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: used, Year of construction: 2026, total length: 11,660 mm, Telescopic work platforms Bwedozrzzkjpfx Aaisr Magni DTB28RT Drive Diesel Year built 2026 Work height (mm) 28,500

Condition: excellent (used), High-quality FANUC wire erosion machine in excellent condition. The machine is well-maintained, operational, and suitable for precise wire erosion operations in tool, mold, and precision machine construction. Manufacturer: FANUC Model: ROBOCUT α-1iD Type: A04B-0320-B001 #E5 Machine No.: P089D1671 Bedpfx Aszrzzdsaiswr Year of Manufacture: 09/2008 Control: FANUC Series 310iS-WA Machine Type: CNC wire erosion machine X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U-axis: 200 mm V-axis: 200 mm Rapid traverse X: 900 mm/min Rapid traverse Y: 900 mm/min Rapid traverse Z: 900 mm/min Rapid traverse U: 450 mm/min Rapid traverse V: 450 mm/min Max. workpiece weight: 1,000 kg Machine weight: 3,000 kg Power supply: 200 V AC, 3-phase, 50/60 Hz Connected load: 13 kVA Automatic wire threading Processing in a full bath Suitable wire diameter: 0.10–0.30 mm

Condition: used, empty load weight: 7,840 kg, maximum load weight: 34,160 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2019, next inspection (TÜV): 10/2026, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 8,100 mm, color: white, Year of construction: 2019, mileage: 174,451 km, Equipment: ABS, tail-lift, Tomvekt: 7840kg, tillatt totalvekt: 42000kg, Lasterom (L B H): 13.403 mm x 2.490 mm x 2.700 mmdekkdimensjon: 385/65 R22.5, Lasteromsvolum: 90 m³, Foraksel: , 2. aksel: , 3. aksel: , Luftfjæring, Underkjøringshinder, Boggi, Bakløfter, Elektronisk bremsesystem EBS, Tilkoblingsplugg 1x15 og 2x7 pin, Anti-spray, Internal ref.: 5494105WSM000005233169HW6212, Bodpezrzy Tjfx Aaiewr

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel engine) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled total control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Bwsdpfxozrzymo Aaijr Standard bucket volume: approx. 0.60 – 1.00 m³ 5826

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Bedpfx Ajzrzygsaiewr Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 430 mm Bowl internal height: approx. 100 mm Sorting track width: approx. 12 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Power connection: 230 volts, 50 Hz - Control unit REO Type Reovib RS6 439-459 for adjustable vibration speed Space required: Ø x H: 430 x 390 mm Weight: 52 kg Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned. 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations, thereby setting the parts in motion.

Condition: used, Vacuum pump, rotary vane pump, sliding vane pump, vacuum pump, cleanroom pump BECKER Type VX 4.40 High Vacuum Pump Serial No.: 2583674 Year of manufacture: 2011 Capacity: 40 m³/h Vacuum: -0.8 bar (determined during test run) Vacuum: -0.9 bar (manufacturer's specification) Suction connection: G 3/4" Motor speed: 1420 rpm Motor power: 1.25 kW Power connection: 400 Volt, 50 Hz - dry-running, oil-free rotary vane vacuum pump Bwsdpfx Aezrzyasaisr - sound insulation made of polystyrene (Styrofoam) Dimensions with sound insulation housing L x W x H: 820 x 460 x 350 mm Dimensions without sound insulation housing L x W x H: 540 x 250 x 280 mm Weight: 45 kg Very good condition

Condition: used, mileage: 21,006 km, power: 174 kW (236.57 HP), first registration: 08/2025, fuel type: diesel, empty load weight: 2,475 kg, maximum load weight: 725 kg, overall weight: 3,200 kg, fuel: diesel, color: black, gearing type: automatic, suspension: other, number of seats: 5, total length: 5,140 mm, number of beds: 4, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), onboard computer, parking heater, second-hand vehicle warranty, soot filter, traction control, trailer coupling, Air conditioning for the driver’s cab, pilot seats, rotating, Mercedes chassis, blower heater, air conditioning for the living area, pop-up roof with double bed, refrigerator with freezer compartment, rear double bed, touchscreen, lumbar support, 5 seat belts, heat-reflecting glass, clock and tachometer, brake pad indicator, dimmable exterior mirrors, 360-degree camera, metallic paint, 4 doors, first owner, Euro 6e, green environmental badge (4), fabric upholstery, tinted windows (privacy glass), trailer maneuvering assistant, inductive charging for smartphones, fully digital instrument cluster, Apple CarPlay, Android Auto, glare-free high beams, distance warning system, reversing camera, black, passenger airbag, front side airbags, front window/head airbags, sliding door on the right, navigation with color monitor, color monitor for navigation system, leather steering wheel, shift paddles, parking assistance camera, parking assistance sensors in the rear, parking assistance sensors in the front, digital radio, electrically foldable exterior mirrors, electric windows (2), seat heating, heated front seats, multi-function steering wheel, live information system, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, automatically dimming interior mirror, power steering, non-smoking vehicle, electric exterior mirrors, alarm system, brake assistant, distance control cruise control, light alloy wheels, detachable tow hitch, rear-wheel drive, third brake light, center armrest, country version Germany, new TÜV/emission test, additional equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will create a customized offer for you. Nationwide delivery possible. 553 Trailer maneuvering assistant, B2 Electric parking brake, BA3 Active brake assistant, BH1 HOLD function, C6L Multifunctional steering wheel, CA3 Active steering assistant, CA4 AIRMATIC, CA5 Camper level control, CK8 Steering wheel heating, CL1 Steering wheel adjustable in height and tilt, CL3 Leather steering wheel, CU4 Aerodynamic package, E07 Hill start assist, E1D Digital radio (DAB), E1E Digital extra: hard drive navigation, E1T Touchpad, E2 Bsdpozrzxpofx Aaiswr

Condition: used, Year of construction: 1996, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 434 mm Control Siemens Sinumerik 840D total power requirement 54 kW weight of the machine ca. 10 t dimensions of the machine ca. 6000x2800 mm Spindle speed (max): approx. 0–4500 rpm Spindle speed (max): approx. 0–4500 rpm Spindle bore: approx. 65 mm Spindle taper: mostly DIN 55026 A6 / ISO taper X-axis travel: approx. 220 mm Z-axis travel: approx. 950 mm Feed rate: approx. 25 m/min Tools & equipment Tool turret: usually 2 turrets with ~12 tool positions Powered tools: possible depending on equipment Bodpfxjzrzxij Aaiowr Tailstock: optional, often NC-controlled (SK30)

Condition: used, Year of construction: 2002, turning diameter 290 mm turning length 850 mm Bedszrzxcepfx Aaiowr swing diameter over bed slide 600 mm Control Siemens SINUMERIK 840D total power requirement 58 kW Automation: Portal with 2 belts Number of turrets: 3 Spindle: Yes # Stepping wheel: No X-axis (transverse) travel: approx. 220 mm Z-axis (longitudinal) travel: approx. 950 mm Feed rate: approx. 25 m/min (x/y) Rapid traverse: approx. 25 m/min

Condition: used, Year of construction: 2008, turning diameter 280 mm turning length 600 mm control Fanuc Series 32i-Model A Bwedpfxszrzw Ss Aaior Turning diameter: 280 mm Turning length: 600 mm

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - Bjdezrzt Hepfx Aaiewr ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual