Tummy Love DE

Condition: good (used), Control system: Siemens 840D Powerline with ShopTurn 3D simulation and SlimLine panel X-axis: 250 mm Z-axis: 635 mm C-axis with tool drive Chuck diameter: 250 mm Turning diameter: 320 mm Turning length: 600 mm Swinging diameter: max. 505 mm Spindle speed range – main spindle: max. 5,000 rpm Drive power – main spindle: 21 kW, 240 Nm Spindle bore: 87 mm Chuck diameter: 250 mm Sauter disc turret: 10 positions Tool holder: VDI 30 Machine weight: approx. 6.0 t Space requirement: approx. 8.1 x 2.4 x 1.80 m Accessories: - 1x collet chuck - 1x jaw chuck - 2x fixed tool holders - 1x driven tools - Chip conveyor - Documentation Fpedpfj Ai Uiysx Am Ejp Operating hours: approx. 47,500 h (reading on 08/04/2026) Runtime: approx. 19,500 h (reading on 08/04/2026) Machine condition: Unchecked – last used in production The accessories shown in the picture may not be included in the scope of delivery. Only accessories confirmed in writing by us will be included.

Condition: used, axle configuration: 3 axles, first registration: 02/2008, total length: 13,700 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5, color: other, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes - Lift Axle = More information = Year of construction: 2008 Tyre size: 385/65 R22.5 Make axles: Gigant Brakes: disc brakes Suspension: air suspension Empty weight: 6.640 kg Carrying capacity: 31.360 kg GVW: 38.000 kg Fedpfx Ams Ai Uive Espp Registration number: CM456QA

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, The VR 88 automatic vertical strapping machine is ideally suited for strapping pallets. It is suitable for installation in both powered and non-powered conveyor systems. The lower lance allows the strap to be threaded through the pallet. During the strap tightening process, the strapping head moves horizontally to compensate for tolerances and ensure uniform strap tension and high stability. The system control program allows for the execution of one or more strapping cycles, depending on the customer's specific packaging requirements. The machine has been completely refurbished by us and is fully functional. Technical data: Supply voltage: 230 V / 400 V / 3-phase / 50 Hz Fjds Ai Uirjpfx Am Eopp Power consumption: 3 kW Strap types: PP or PET Strap width: 12 mm Strap thickness: 0.6 – 1.0 mm Strap tension: up to 200 kg (optionally up to 500 kg) Closure type: Hot wedge welding Closure time: approx. 1 – 3 s, depending on strap type Strap feed speed: 2.5 – 5.5 m/s Strap retraction speed: 2.5 – 5.5 m/s Strap tensioning speed: approx. 0.25 m/s Strap reel core: 405 mm Strap frame: 1,200 × 1,600 mm

Condition: used, TECHNICAL DETAILS - CNC : Siemens OP27 - Pressure : 2 - 125 [t] - Working speed : 0 - 7.6 [mm/sec] - Vertical rapid speed : 440 [mm/sec] - Compressor piston stroke : 0 - 130 [mm] - Upper extractor stroke : 15 [mm] - Passage between uprights : 404 / 104 [mm] POWER SUPPLY - Supply voltage : 3x400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 1500 [mm] - Machine height : 2450 [mm] Fedpfxj Ai Uins Am Eepp - Machine weight : 2300 [kg] MACHINE HOURS - Number of hours under power : 28895 [h] - Number of strokes : 8'135'532 - Robot * Order : UNIOP * Number of hours (powered) : 4135 [h] * Aspiration : Elbaron RON/A * Lubrication : Siegfried EQUIPMENT - Oil mist extraction - Uncoiler

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top press Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly output: approx. 20 pallets/hour (depending on pallet height and wrapping type) Conveyor height: 500 mm Technical specifications: • Wrapping cycle, programmable via the electronic control panel and SIEMENS S7-1200, KTP700 control panel • Control system SIEMENS PLC S7 1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop in the end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photo cell for automatic detection of pallet height • Clamp for attaching the film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting the turntable speed from 5 to 15 rpm • Frequency inverter for adjusting the film carriage speed • Powerstretch 250 % • Film welding with hot pads and counter blade • Standard colors: Gray RAL 7001 for fixed parts, Gray RAL 7016 for moving parts and plastic covers. • Potential-free contacts Itsdpowxrh Dsz E Rbxef • 1 frequency inverter for controlling the conveyor on the turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3 phases + PE > Frequency: 50 Hz > Installed power: 3 kW Fpedpfxe Ai Uiks Am Esp > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLLER CHARACTERISTICS > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Inner diameter of the roll: 76 mm > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outer diameter of the roll: 250 mm Powered roller conveyor for discharge, with double chain sprockets, frequency-controlled Length 1470 mm Usable width 1000 mm Height 500 mm Roller diameter 89 mm Pitch 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light barriers, safety class 4, safety fences, height: 2200 mm with access door, two-channel safety magnetic sensor integrated into the safety control system

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 12,400 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, total length: 13,550 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385/65 R22.5, color: other, Equipment: ABS, = Additional options and accessories = Fpode Ai Uh Uopfx Am Ejp - Air suspension - Disc brakes = More information = Year of construction: 2013 Tyre size: 385/65 R22.5 Make axles: Meritor Brakes: disc brakes Suspension: air suspension Empty weight: 7.250 kg Carrying capacity: 30.750 kg GVW: 38.000 kg

Condition: excellent (used), mileage: 427,022 km, power: 120 kW (163.15 HP), first registration: 07/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: AdBlue, Despite the care taken to ensure the data is entered correctly, we cannot be held responsible for any errors in this listing. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = General Information Year of manufacture: 2015 Technical Information Engine displacement: 2,143 cc Fsdpfxe Ai Uh Rj Am Ejpp Front axle: Steered Rear axle: Dual tires Weights Unladen weight: 2,550 kg Payload: 950 kg GVW: 3,500 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for further information.

Condition: not inspected (used), Year of construction: 2006, Travel range X/Z: 210 / 450 mm Turning diameter: max. 246 mm Distance between centers: 600 mm Control system: Siemens 840D Powerline with ShopTurn Spindle speed: 6,000 rpm Spindle power: 16 kW Spindle bore diameter: 68.5 mm Rapid traverse rate XZ: 60/45 m/min Tool turret: 12 positions Tool holder: VDI 30 Operating hours: approx. 50,000 h Accessories: - Collet chuck - Set of fixed tool holders - 2 driven tools - Chip conveyor - Various reduction sleeves - Bar feeder Breuning/Irco (Type: 50.10.5, Serial No. 40003394; Year of manufacture 2003) - Documentation Fpjdpfxe Ai Ugwo Am Ejp The accessories shown in the image may not be included in the scope of delivery. Only accessories that have been confirmed in writing by us will be included.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 86645881, input voltage: 400 V, input frequency: 50 Hz, year of last overhaul: 2026, power: 15.6 kW (21.21 HP), used universal dishwasher Hobart UXS-10N, overhauled, serial no. 86645881, 400 V, 50 Hz, 15.6 kW, 24.8 A, for baskets 60 x 76 cm, year of manufacture: 2025 Fpodj Ai Ugtjpfx Am Ejp

Condition: used, Year of construction: 2024, travel -x axis 5.550 mm travel -y axis 4.000 mm travel -z axis 2.000 mm control HEIDENHAIN - TNC 640 surface area 4.000 x 2.000 mm faceplate diameter 3.500 mm turning speed range - faceplate 0 - 150 U/min max. workpiece weight on faceplate 20.000 kg Spindle speed 15 - 6.000 min -1 tool adaptor HSK 100-T spindle drive 38 kW numbers of positions in the tool changer 40 Travelling Column Gantry Milling Machine for 5-Axis Simultaneous Machining with Integrated Rotary Turning Table | MECOF / EMCO – DYNAMILL HP5 equipped with Coolant system with internal coolant supply ITC (40 bar), Chip conveyor, Heidenhain TS 460 touch probe, 40-position automatic tool changer, The machine has only approx. 1.108 H spindle hours. Additional Equipment and Features: - NC milling head (infinitely variable positioning) - Heidenhain HR 550 FS wireless handwheel - Kinematic optimisation of the milling heads Fpjdpfxj Ai Ughj Am Eep - Laser tool measurement system - Interpolation turning The machine is in a very well-maintained, like-new condition and can be inspected under power at any time in the factory location. Videos of the machine at its current location are available upon request. Please refer to our quotation for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DYNAMILLHP5 | DYNAMILL HP 5 | DYNAMILL HP-5

Condition: used, Year of construction: 2009, travel -x axis 1.760 mm travel -y axis 800 mm travel -z axis 850 mm control SIEMENS - 840 D Spindle speed 30 - 6.000 min -1 numbers of positions in the tool changer 52 tool taper SK50 table dimension (L x W) 1.350 x 900 mm rotary table dia. 800 mm Total clamping area 2.200 mm Milling Machine - Vertical | AXA - VHC3 - 1760 XTS 50 equipped with 52-position automatic tool changer, NC rotary table (Ø 800 mm), Chip conveyor, Coolant system with belt filter unit. Additional information: - 1 NC swivel head, continuously positionable - 1 NC rotary table, type: RTA 4L – 800 - Electronic handwheel, type: BHG, manufacturer: Siemens - 3D touch probe, type: OMP 60, with receiver, manufacturer: Renishaw The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VHC3-1760XTS | VHC 3 1760 XTS | VHC-3-1760-XTS | VHC3-1760 | VHC1760XTS Fedpfx Amo Ai Ugds Eopp

Condition: good (used), mileage: 661,247 km, power: 353 kW (479.95 HP), first registration: 07/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, retarder, seat heater, soot filter, spoiler, - Aluminum fuel tank - Brake booster - Roof spoiler - EPS - Low noise - Tipping hydraulics - Air horn - Particle filter - Radio/CD player - Sunroof - Sleeper cab - Side door - Seat heating - Tool box Year of construction: 2016 Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Technical condition: good Optical condition: good Reference number: 77 Vehicle number: 77 MAN 18.480 TGX / Tipping hydraulics / Retarder / Euro6 .: WMA06XZZ2GW492 Transmission: Automatic Suspension: Leaf / Air Air conditioning Retarder Engine brake Cruise control Fpjdpfx Amj Ai Uf Is Esp Cooling box Auxiliary heater Navigation system Distance control assistant Lane keeping assistant Tipping hydraulics Emission standard EURO 6 Special equipment: Storage compartment, Aero kit, Roof fairing, Mobile phone antenna, Work lights (2) on cab roof, Battery 225 Ah, Mechanical battery disconnect switch, Cab: with air suspension, Driver's seat comfort, air-suspended and heated, with lumbar support and shoulder adjustment, Flame starter system, Gearbox 12-speed - Type: ZF 12 AS, Tipmatic, Air deflector against dust swirl, Heated air dryer, Auxiliary air heater Eberspächer Airtronic D2, Auxiliary drive NH/1C without flange, Retarder, Exterior sun visor, Sound system, Start/Stop system on the engine, Control module fleet management system, Door extension for cab, Additional long-range/fog lights with cornering light, Additional fuel filter heated with water separator Additional equipment: Axle configuration: 4x2, Ambient lighting, Approach/front mirrors, Trailer socket 24V / 7-pole, Trailer socket ABS, Anti-slip control (ASR), Audio system: Radio MAN Media Truck Advanced 12V with navigation system preparation, Exterior mirrors electrically adjustable and heated, Wide-angle mirror heated, On-board computer MAN-Tronic, Curb mirror right, Differential lock rear axle, Electronic braking system MAN-Brakematic, EURO 6 engine, Cab: with Nordic insulation, Cab: XLX, Lower bunk with storage space, Suspension: Leaf / Air, Power windows, Remote central locking, Windshield tinted, Generator 28 V 80 A, Lifting roof manual, Body/superstructure: Semi-trailer tractor, Rocker arm - Brake EVB, Automatic climate control, Fuel filter heated, Fuel tank: Combination tank - 400 liters diesel + 60 liters urea solution (AdBlue), Steering wheel with multi-function, Air intake raised, Air compressor 1-cylinder 360 cc, Engine 12.4 L - 353 kW Diesel, Engine compartment encapsulation, Wheelbase 3600 mm, Spare wheel jack side, Fifth wheel coupling: Jost JSK 37 C, Disc brake rear axle, Disc brake front axle, Rear side windows tinted, Seat cover / upholstery: Comfort quality, Sun visor for windshield, Sun visor side window, Driver's door, Spray mist reduction, Stabilizer on one rear axle, Stabilizer front axle, Storage box accessible from outside, TGX, Door windows tinted, Viscous fan, Central locking, Permissible total weight 18.00 t No liability for printing & typing errors, changes, prior sales and errors reserved! No liability for printing & typing errors, changes, prior sales and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: ...

Condition: good (used), Year of construction: 1978, Table dimensions 2.900 x 1.400 mm throat rechts 1.100 x 150 mm motor power 7,5 kw Fedpfe Ai Ufksx Am Espp sanding belt measurements 7.800 x 150 mm 320 mm 2.500 mm Working width 1.100 mm Dust suction hood 180 mm

Condition: good (used), Year of construction: 2022, 0,4 - 3 mm Workingpiece thickness from to 10 - 45 mm Total length ca. 2.800 mm Fjdpfxe Ai Ufgj Am Ejpp Feed speed 8 m/min. total power requirement ca. 7,1 kw

Condition: good (used), first registration: 03/2017, Year of manufacture: 2017 Unladen weight: 7,640 kg Payload: 31,360 kg GVWR: 39,000 kg Tipping body: Rear APK (Technical Main Inspection): valid until 04/2027 Technical condition: good Optical condition: good Vehicle number: Semi-trailer - Tipper. 31 Kloos / Steel / Lift axle / 3 axles / 50m³ .: W09SKF335HWKC0010 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 7,640 kg 3 axles Lift axle Steel 50m³ No liability for printing and typographical errors, changes, prior sale, and errors. = Company information = No liability for printing and typographical errors, changes, prior sale, and errors. Fodpfx Ae Ai Ufcom Eopp Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: excellent (used), mileage: 152,685 km, power: 88 kW (119.65 HP), first registration: 10/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: AdBlue, Despite our diligence in ensuring the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Fjde Ai Ud Rjpfx Am Eopp Belgium Tel: Leemans Thierry Tel: Leemans Dino = Further Information = General Information Year of construction: 2014 Technical Information Engine displacement: 1,968 cc Front axle: Steered Rear axle: Double-tired Weights Unladen weight: 2,835 kg Payload: 2,165 kg GVWR: 5,000 kg Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.

Condition: good (used), Year of construction: 1997, sheet width - max. 2035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control FM 5 total power requirement 5.5 kW weight of the machine ca. 4600 kg range L-W-H 2426 x 2124 x 1606 mm From a chamber of crafts/trades (vocational training center) In good condition (!!) Equipment: - Robust NC electro-hydraulic guillotine shear - FASTI NC touch control system "FM 5" * Pivoting control panel (front left) - NC motorized backgauge - Electro-hydraulic cutting angle adjustment - Electro-hydraulic blade gap adjustment - 1x side gauge with scale - 1x front support arm - Support table with recessed grips - 1x mobile foot switch - Rear safety guard (protective fencing) - Original operating manual * Special accessories included: Fpodpfx Amo Ai Ud Hj Eop - Sheet metal support/lifting device for cutting thin sheet metal

Condition: good (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 5.500 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm From a maintenance workshop In good condition (!!) Equipment: - Electro-hydraulic "swing-cut" sheet metal shear - Machine frame: all-steel welded construction - ELGO NC control (model P8721), control panel located on the front left * For positioning the motorized backgauge * Allows for input of target/actual position values * Adjustment via three-phase motor and toothed belt - Support table equipped with ball transfers * Recessed grips integrated between the table plates - Front finger guard - Hydraulic sheet hold-downs - 1x extra-long side gauge with mm scale * 3.000 mm length, includes support leg - 1x front support arm with mm scale - 1x mobile foot switch - Spare blades - Rear safety enclosure (protective fencing) - Front-mounted emergency stop button - Original operating manual and circuit diagram Special accessories included: Fedpfj Ai Ud Aox Am Espp - EHT pneumatic sheet support device (for cutting thin sheet metal)

Condition: used, Year of construction: 1991, pressure 60 t passage width 1000 mm stroke 600 mm table-size 990x400 mm table height over floor 600-900 mm working pressure 300 bar oil volume 60 l total power requirement 1 x 5,5 / 1 x 7,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1250 x 1000 x 2450 mm Features: - Two-hand operation - Emergency stop Fpjdpfx Ame Ai Udxe Esp - Depth adjustment via limit switches - Pressure preselection - Work table with 3 T-slots - Rear protective screen with mesh - Work area light - Machine feet

Condition: used, Year of construction: 2007, Punching capacity 165 kN working area 2175 x 1250 mm Fpedpfx As Ai Udusm Eep laser capacity in Watt 100 - 2000 plate thickness 4 mm control Bosch PNC-P 18 Stück weight of the machine ca. 13.900 kg dimensions 6800 x 6600 x 2400 mm Standard Equipment: - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 slots for tools and clamping jaws - 2 clamping jaws - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for repositioning - Brush tables - Workpiece flap 300 x 500 mm for laser station - 1 bin for good parts - Laser unit: High-frequency-excited CO2 laser TruCoax 2000, vibration-isolated, integrated into the machine frame, incl. cooling unit and TASC 3 laser control - FocusLine - NitroLine high-pressure cutting - High-speed processing with SprintLine - Programmable cutting gas pressure adjustment - Laser cutting head: 7.5" lens, quick-change mechanism, ControlLine distance control - Punching head: hydraulic mono-tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, second lubricant reservoir, punching scrap extraction, chip bucket - Bosch PNC-P control system, 15" TFT color touchscreen, easy operation, online help, diagnostic functions, maintenance log, technology data, job tables, teleservice, 3.5" floppy disk drive, USB flash drive interface, RJ45 network connection - Safety: multi-beam photoelectric sensors, emergency shutdown for hydraulics, extraction system, and compact dust collector, protective device against scattered radiation at the cutting head - Network connection via installation by Teleservice Advanced Features: - MultiTool function - MultiBend function - Signing/rapid beading function - Adaptive stroke calibration - Die spray lubrication - 1 additional clamping jaw - Adjustable-height repositioning cylinder - Sensor for part chute - Vibration-dampened mounting - MDE integrated machine data acquisition - Sheet-friendly die ball - MDE interface - SheetMaster preparation Operating hours: Machine ON: 54,698 h Laser ON: 55,959 h Beam ON: 5,535 h (As of September 2025)

Condition: used, Year of construction: 2007, pressure 85 t chamfer lenght 2720 mm column daylight 2260 mm stroke 445 mm X-axis travel 600 mm 445 mm R-axis travel 250 mm useable dayligth 385 mm control TASC 6000 weight of the machine ca. 8600 kg dimensions 3620 x 1740 x 2835 mm Fsdpfj Ai Udqjx Am Ejpp Features: - Pressure beam with high flexural strength - Spherical mounting of the pressure beam with pressure beam tilt - Electrohydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable dual pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Wedge crowning integrated into the table, manual - Upper die clamping system “New Standard Clamping,” manual, hardened, self-centering, for vertical die change - Lower die clamping system with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers with secure adjustment from the front - Machine control: TRUMPF TASC 6000 - Control panel with LCD keypad, foot switch for emergency start and emergency stop - Safety features: integrated side doors and automatic rear roll-up cover - Control cabinet cooling (air-to-air heat exchanger) - Oil cooler - Network-ready - Modern machine design Advanced machine features - Increased installation height/stroke: +230 mm - BendMaster preparation - 4-axis backgauge system - Hydraulic upper die clamping - CNC crowning - CNC lower die shift - BendGuard - Foot switch - ACB preparation - Rear work area lighting - Front work area lighting Operating hours: 87,934 h (as of November 2025)

Condition: used, Year of construction: 1993, max. paper size 36 x 52 cm max. printing speed sheets 8000 /h dampening system Varn Kompac numbering unit include Fedpfxo Ai Udme Am Eopp

Condition: used, Year of construction: 2006, impressions 44 Mio. max. printing speed sheets 13000 /h max. paper size 37 x 52 cm Fedpfx Amj Ai Udio Espp dampening system Alcolor plate clamping system Easyplate

Condition: used, Year of construction: 1985, max. printing speed sheets 8000 /h max. paper size 32 x 46 cm dampening system Standard numbering unit yes dampening system Varn Kompac Fedpfx As Ai Udfom Ejpp

Condition: used, Year of construction: 1997, impressions 42 Mio. max. printing speed sheets 15000 /h max. paper size 37 x 52 cm plate clamping system Autoplate Fodpo Ai Udbefx Am Ejpp dampening system Alcolor automatic blanket wash-up device optonal serial no. 201.207