Dealer profile

IT-CSV from Ahrensburg

IT-CSV


Herr Lutz Rucktäschel

Buchenweg 119
22926 Ahrensburg

Germany


Show phone number


IT-CSV ist ein seit 2003 existierendes Unternehmen.
Spezialkenntnisse im Bereich Windows Netzwerke, Virtualisierung, Hochverfügbarkeit. Hardware: von PC über Laptop bis hin zu leistungsfähigen Serversystemen.

Go to top offers › 

current listings & special promotions
4128634.jpg
CNC Lathe Takisawa EX 106
CNC Lathe with parts catcher. turning diameter 220 mm turning length 325 mm control FANUC 21i TB swing diameter over slide rest 360 mm turning speed range 50 - 5000 1/min main drive 7,5 kW rapid trave... more »
4128633.jpg
Horizontal machining center Mori Seiki SH 403
This horizontal machining center has a triple palett changer, 40 tools magazine and coolant through spindle. x-travel 560 mm y-travel 510 mm z-travel 510 mm control Fanuc MSG 501 spindle speeds 12000 ... more »
4105207.jpg
5-axis M/C with horizontal spindle Mori Seiki NMH 10000 DCG
Fast state of the art universal machining center with 7 palletpool, Pallet size 1000 mm full A- and B-axis, high Bfkyxewwlx pressure coolant through spindle 70 bar, chip conveyor, tool lenght measure... more »
Send inquiry to IT-CSV

Company Name

Name*, First name

Street and house number

Postcode & Town

Phone

Fax

E-mail*

Your enquiry*

Please reply via*



more listings & machinery on offer
4128634.jpg
CNC Lathe Takisawa EX 106
CNC Lathe with parts catcher. turning diameter 220 mm turning length 325 mm control FANUC 21i TB swing diameter over slide rest 360 mm turning speed range 50 - 5000 1/min main drive 7,5 kW rapid traverse Z-axis 10 m/min rapid trav ...
4128633.jpg
Horizontal machining center Mori Seiki SH 403
This horizontal machining center has a triple palett changer, 40 tools magazine and coolant through spindle. x-travel 560 mm y-travel 510 mm z-travel 510 mm control Fanuc MSG 501 spindle speeds 12000 1/min spindle drive 22 kW rapi ...
4105207.jpg
5-axis M/C with horizontal spindle Mori Seiki NMH 10000 DCG
Fast state of the art universal machining center with 7 palletpool, Pallet size 1000 mm full A- and B-axis, high pressure coolant through spindle 70 bar, chip conveyor, tool lenght measurement and tool breackage detector. 140 tool ...
4105205.jpg
5-axis M/C with horizontal spindle Mori Seiki NMH 6300 DCG
Fast state of the art universal machining center with twin 630mm pallet changer, full A- and B-axis, high pressure coolant through spindle 70 bar, chip conveyor, tool lenght measurement and tool breackage detector. 140 tool magazi ...
4105203.jpg
5-axis M/C with vertical spindle Mori Seiki NMV 5000 DCG
Full 5 axis universal high speed machining center with turning and swivelling table and vertical spindle. x-travel 730 mm y-travel 510 mm z-travel 510 mm control Mori Seiki MSX 711 MAPPS III turning speeds 12000 1/min spindle driv ...
4105202.jpg
Horizontal machining center Mori Seiki NH 6300 DCG APC6
Fast state of the art horizontal machining center with 6 palletpool 630mm pallets, full B-axis, high pressure coolant through spindle 50 bar, chip conveyor, 240 tool magazine HSK-A100 Machine is in excellent condition. Additional ...
4105200.jpg
Horizontal machining center Mori Seiki NH 4000 DCG APC3
Horizontal machining center with full B-axis, coolant through spindle and 60 tools magazine. x-travel 560 mm y-travel 560 mm z-travel 630 mm control MSX 711 MAPPS IV spindle drive 27 / 22 kW turning speed range - stepless 14.000 1 ...
4103236.jpg
5-axis unversal machining center Matsuura MAM 72-63V APC 2
Full 5 axis universal machining center with turning and swivelling table and vertical spindle. Machine is in excellent maintenance condition. A new spindle was installed in 2018 x-travel 760 mm y-travel 845 mm z-travel 610 mm cont ...
4088075.jpg
Horizontal Machining Center Mori Seiki NHX 5000
Excellent high speed horizontal machining center with full b-axis and coolant through spindle. x-travel 730 mm y-travel 730 mm z-travel 880 mm control M730BM MAPPS IV turning speeds 12000 1/min spindle drive 15/11 kW tool taper BT ...
4086319.jpg
CNC milling and turning center Mori Seiki NZ 1500 T2Y
CNC Turning-and Milling Center The NZ1500 T2Y has 2 spindles and 2 turrets, the upper turret has Y-axis function and built-in milling motors. This not only allows synchronized machining using 2 turrets, but also achieves heavy-dut ...
4086315.jpg
Vertical machining center Mori Seiki NV 6000 DCG
Very rigid vertical machining center in excellent condition. x-travel 900 mm y-travel 600 mm z-travel 450 mm control MSX 701 MAPPS 3 (Fanuc) spindle drive motor 30/20 kW spindle turning speed - stepless 20000 min-¹ spindle taper ...
4069446.jpg
Barfeeder magazine IEMCA TAL 65 Auto
Bar stock feeder magazine for large volume turning up to dia. 65mm. Actually there are available 16 mm and 25 mm channels and pusher. Was installed at Benzinger machine. bar material dia. max with puchase of channels 65 mm bar len ...
4044305.jpg
Tool Presetter Elbo Controlli Amon Ra 106V
The ELBO Amon Ra 106V is a servo controlled Tool Presetting machine with interchangeable spindle for highest precision. Actually there is a HSK-A 100 spindle installed. Via DNC System tool offset data can be transferred directly t ...
4040583.jpg
Lasersinter System EOS M290
This Laser Sinter Unit is in like new condition, little used only, The user has given up this part of the business. Software: EOS RP Tools; EOSTATE; EOSPRINT; Materialise Magics RP with SG+ and more Moduls Accessories: Airfiltersy ...
4027999.jpg
Rotary tool holder for Mori Seiki Sauter / Mori Seiki T32260 A 01
This tool holder is like new, never used tool clamping by collet shaft cross dia 40 mm Beujvlyt89 tool taper DIN 6499-40-A transmission ratio 1:1 RPM: 6000 1/min
4027998.jpg
Rotary tool holder for Mori Seiki Sauter / Mori Seiki T32262 A 01
This tool holder is like new, never used tool clamping by collet shaft cross dia 40 mm Beujvchok8 tool taper DIN 6499-40-A transmission ratio 1:1 RPM: 6000 1/min
4027995.jpg
Two-axis rotary table with 4 spindles Nikken CNC 5 AX-200 4MT-120 FA
2-axis 4-spindle CNC Rotary table comes with two encoder- and power cables. For hydraulic clamping, a separate hydraulic system is supplied. Iexi87o2 It fits to nearly all Fanuc 16 iM or 18 iM controls, which are prepared for 4t ...
4027992.jpg
Two-axis rotary table with twin spindles Nikken CNC 5 AX-200 2MT-105-120 FA
2-axis 2-spindle CNC Rotary table comes with two encoder- and power cables. For hydraulic clamping, a separate hydraulic pump will be required. It fits to nearly all Fanuc 16 iM or 18 iM controls, which are prepared for 4th and 5 ...
4027991.jpg
Two-axis rotary table Nikken Nikken CNC 5 AX-200 FA/001
2 - axis CNC Rotary table comes wqith two encoder and power cables. For hydraulic clamping, a separate hydraulic pump will be required. It fits to nearly all Fanuc 16 iM or 18 iM controls, which are prepared for 4th and 5th axis. ...
4027896.jpg
Barfeeder Magazine for 3 m bar stock TOP Automazioni TOP LOAD 4-42 (RSX 342)
Fully automated bar loader magazine for CNC lathes with a maximum bar capacity of 25 mm. Actually fits to small EMCO machines, but the loader can be upgraded to 42 mm bar stock diameter for larger machines of all brands. Idzy0qpy
4027214.jpg
Universal Machining Center Handtmann UBZ NT 200/100 T-1
UBZ NT 200 / 100 T-1 Highspeed Universal-Machining center for Aluminium, Magnesium, Plastics and Steel (finishing only) The machine has external minimum quantity Luibrication. x-travel 3000 mm y-travel 1800 mm z-travel 1000 mm con ...
23 Show offers ›
Try our app for used machines now!
Machineseeker app for iPhone and Android.