Zphu Regsonik

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,838 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2020. It features an X-axis travel of 1100 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a clamping area of 1400 x 560 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. Rjdpfxszibzxs Aa Isw • Distance spindle nose to table: 120–630 mm • Clamping area: 1400 x 560 mm • Spindle power: 13 kW (40% DC) / 9 kW (100% DC) • Spindle torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool magazine: 30 pockets (double gripper, loaded through spindle, programmed via control panel) • Max. tool diameter: 80 mm (130 mm with free adjacent pockets) • Max. tool length: 300 mm (from spindle face) • Max. magazine load: 120 kg • Feed drives: AC drives with ball screws • Feed rate (X/Y/Z): 30 m/min • Rapid traverse (X/Y/Z): 30 m/min Additional equipment • Renishaw tool probe • Renishaw workpiece probe • Clamps/workholding set Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, torque: 118 Nm, controller manufacturer: FANUC, controller model: FANUC I SERIES, spindle speed (max.): 12,000 rpm, distance table to spindle center: 150 mm, spindle nose: BT40, number of slots in tool magazine: 30, Equipment: chip conveyor, CNC milling machine of medium dimensions, intended for both rough and fine processing. A powerful motor in combination with high rigidity and a high-precision base spindle enable large Redpfx Aaezh Uzcs Iew removals and precision. The machine is a suitable answer to a wide range of requirements in production, especially in toolmaking. The machine is sold as a set with the equipment described in the listing. Machine is is good condition and regularly maintained. -15 " display -2MB part program storage - 1000 programs - 12.000 RPM spindle 18,5kW, 118Nm -BT40 -30 tools magazine - 12 bar through the spindle cooling -oil skimmer belt type -ethernet connection -coolant gun -ball screw nut cooling -tool breakage detection in magazine -automatic doors -robot interface -4th axis preparation -Hiwin RCV 250 rotary table -HIWIN RTS 250 suport -Hidraulic aggregate 200 bar 2 A+B -4th axis fixture support hydraulic (3x oil, 2x air) -seat air check -level sensor for coolant liquid -LNS MH500 chip conveyor -mist collector interface

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 600mm C axis Table (360 degrees) +/- 90-degree head (B axis), Rsdpfezh Nczex Aa Ijw 37kW Spindle Motor, 40 station side arm ATC, din 40 spindle taper, 12,000rpm spindle, Hurco Winmax 5 control, through spindle coolant, swarf conveyor, spindle probe.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, CNC Vertical Machining Center DECKEL MAHO DMC 100 V For sale is a CNC-controlled vertical machining center, DECKEL MAHO DMC 100 V, with Heidenhain control. This machine is ideally suited for tool and die making, single-part production, and general CNC milling operations. Technical specifications: Manufacturer: DECKEL MAHO / DMG Type: DMC 100 V Control: Heidenhain Travel distances X/Y/Z: approx. 1000 / 800 / 500 mm Table size: approx. 1250 × 800 mm Max. table load: approx. 1200 kg Tool holder: SK40 / ISO40 Tool changer: 30/60 positions, depending on the model Spindle speed: up to approx. 15,000 rpm Redpjzh Hxmjfx Aa Iow Equipment: Heidenhain CNC control Tool changer SK40 tool holder Renishaw measuring probe Coolant system Chip conveyor Condition: Used Machine is complete Inspection under power possible by arrangement.

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 1016mm x 508mm x 508mm, table size 1168mm x 508mm, 10000rpm spindle, Rodpfxszh Hw Ns Aa Ijw 20 station ATC, BT40 spindle taper, input 15kW, Hurco WINMAX 5 control, coolant, swarf auger.

Condition: good (used), Year of construction: 2012, operating hours: 5,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: 530, table width: 560 mm, table length: 1,150 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 5,800 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine in good condition! Machine was sold due to the owner's retirement. Vertical machining center BAZ Posmill C 1050, year of manufacture 2012 Travel ranges X/Y/Z: 1050 mm x 530 mm x 630 mm Control system: Heidenhain ITNC 530 30-position tool changer Spindle: SK 40, 10,000 rpm Internal coolant system with 20 bar Rodpfxszh Hr Ho Aa Isw Chip conveyor Table size: 1150 mm x 560 mm Infrared measuring probe Electric handwheel Table probing system

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, This machine is in excellent technical condition and is available immediately. Tools and a vise are not included in the scope of delivery. This machine is in excellent technical condition and is available immediately. Tools and a vise are not included in the scope of delivery. Technical data is attached in PDF format. Optional features: Cooling with air through the rotating milling spindle Coolant/air switchable in combination with the optional coolant supply through the spindle High-level production package (LNS left) Includes: Tool length measurement & tool breakage detection Air blow device on the workpiece High-pressure coolant supply through the spindle (15 bar) Flushing system for the cover Chip conveyor, hinge belt, (LNS MH500), ejector on the left Prepared for Mazak Monitoring System B OMP 60 (optical) Synchronized tapping Max. program memory 8 MB Rsdpfx Aajzh Ewuj Ijw Input-constant inclination angle during movement The following options have also been retrofitted: Measuring probe CMP 60 Handwheel Engraving function

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Speed:10,000 rpm Rsdpezhzarefx Aa Isw Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, 5-axis machining center. Redpfxozhxngj Aa Iew

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, table load: 800 kg, spindle speed (max.): 1,100 rpm, number of axes: 3, This 3-axis DAEWOO Mynx 500 was manufactured in 1999. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 575 mm. The machine includes a T-slotted table size of 1200 mm x 500 mm and a maximum table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO Mynx 500 vertical machining centre we have for sale. Contact us for further details. • CE Marked: Yes • Part Counter: 2,430 • Cycle Time: 0 h 3 min 14 s • Current Active Tool: T0006 Rsdpozhb I Njfx Aa Iow • Table Type: T-Slotted • Table Size: Typically 1200 mm × 500 mm

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3001033048, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: FANUC, controller model: 0i-MC, workpiece weight (max.): 1,000 kg, total height: 2,715 mm, total length: 3,260 mm, total width: 3,060 mm, table width: 660 mm, table length: 1,250 mm, table load: 1,000 kg, overall weight: 6,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of spindles: 1, number of slots in tool magazine: 24, For sale: a DAHLIH DL-MCV1020BA CNC vertical machining center from 2008, equipped with a FANUC control system. The machine is currently still operational in our production environment and has not been dismantled. This means that, if interested, it can be inspected while powered on and, upon agreement, tested in working order. This robust vertical machining center is suitable for a wide range of milling, drilling, and tapping operations and represents an attractive solution for companies looking for a reliable CNC machining center with a large machining capacity. The machine is sold in its current condition. Any tools, fixtures, or other accessories visible in the photos are only included if explicitly agreed upon. Rjdpfx Aezhbq Rea Iow Inspection and functional testing are possible in Kuurne, Belgium, by appointment only.

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Redpfozg Shqjx Aa Isw Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel

Condition: used, Year of construction: 2009, FADAL VMC 3016 FX MACHINING CENTER YEAR OF FIRST INSTALLATION: 2009 CNC: GE FANUC SERIES 0i - MC TRAVELS: X: 762 mm Y: 406 mm Z: 508 mm SPINDLE SPEED: 10,000 RPM Redpfx Aozg Ivwsa Iew TOOL MAGAZINE: 20 POSITIONS TAPER: ISO 40 INTERNAL COOLANT SYSTEM CHIP CONVEYOR

Condition: used, Year of construction: 2006, Hurco VMX 42 i, Year of manufacture: 2006, Control system: Ultimax 4, Travel range X/Y/Z: 1060/610/610 mm, Tool changer: 40 positions, Tool holder: SK 40, Spindle speed: up to 10,000 rpm, Chip conveyor, Rjdpozg E Nujfx Aa Ijw Internal coolant system (IKZ), X and Y axes have slight play.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 540 x 540mm, Table 1120 x 540mm, siemens 810 Control, 24 Station ATC, Spindle power 15Kw, Rsdpfx Ajzg Enkea Iow 10,000rpm, BT40 Spindle, Coolant,

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating hours: 15,950 h, POSmill E 1100 machining center ITNC 530 (2014) Manufacturer: POSmill Type: E 1100 machining center ITNC 530 Year of manufacture: 2014 Condition: used, good under power ready for demonstration, X-spindle NEW Switch-on hours approx. 43,559h Spindle hours approx. 15.789h Control ITNC 530 Travels POsmill E 1100 X-axis 1100 mm Y-axis 600 mm Z-axis 510 mm Rapid traverse up to 32 m/min Ball screw drives up to 50 mm Feed rate 1 - 10,000 mm/min. Tool holder ISO 40 Speed, max. 10,000 rpm Power, max. 25 kW Spindle/table distance 120-630 mm Table dimensions 1300 x 600 mm Distance floor/table approx. 855 mm Load, max. 1,000 kg Distance spindle/stand approx. 600 mm Number of tools 60 pcs. Tool length, max. 300 mm Tool weight, max. 8 kg Changing time from 5.5 s Weight 8,500 kg - Original documentation - 3D measuring probe - Belt filter system with IKZ 20 bar Rjdpfszgu Utex Aa Isw - Water gun - Air gun - Machine feet - Chip conveyor - HR 410 handwheel - Prepared for 4th & 5th axis Note: Without vices

Condition: used, Year of construction: 2018, Milling machines Rsdpezguh Hofx Aa Iew Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Redezguhyjpfx Aa Iow Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: PV10150642, MACHINE SPECIFICATION Table size 1200 x 480mm Rodszguf Sepfx Aa Ijw X axis traverse 1050mm Y axis traverse 540mm Z axis traverse 560mm Spindle nose to table 80 – 640mm Spindle BT 40 Spindle speeds 20 – 10,000rpm Spindle motor 15kW Rapid feed rate X/Y/Z 32/32/24m/min Toolchanger capacity 24 Tools Approximate weight 6600Kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control Swarf auger Coolant system Lighting Guarding

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Bridgeport VMC 1000/30 was manufactured in 2002. It features an impressive X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN TNC 530 control and a NIKKEN 5-axis rotary table. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000/30 vertical machining centre we have for sale. Contact us for further details. Redpfx Aaezf Iqrs Iew • Axis travel: Y 600 mm (note: another line lists Y = 300 mm; to be confirmed) Additional equipment • Nikken 5-axis rotary table, model 200ZA (200 mm) • Nikken 4th/5th axis interface Technical Specification Taper Size BT 40

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, Work area Travel range X: 1,000 mm Travel range Y: 550 mm Travel range Z: 500 mm Clamping area (L x W): 1,100 x 502 Table load: 700 kg Spindle Speed: 12,000 rpm Power: 20.9 kW (25% duty cycle) Torque: 178 Nm (25% duty cycle) Tool holder: BBT 40 (conversion to SK 40 possible) Redszf Hupjpfx Aa Iew General Tool changer: 30-position (double gripper) Machine bed: High-strength Meehanite casting Rapid traverse rate: 36 / 36 / 30 m/min Equipment Chip management: Chip conveyor incl. chip flushing in the work area Coolant management: Internal coolant supply (IKZ 30 bar) Cooling air: Programmable external cooling Temperature management: Cooling unit for spindle oil Run-in assistance: Electronic handwheel Network connection: Ethernet interface 4th axis: PLC-side preparation Conversion kit to SK 40: Included

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller model: Okuma OSP-P300MA-e, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, Travel X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Distance from table surface to spindle nose: 150 – 610 mm Distance from column front to spindle center: 720 mm Table Dimensions: 560 x 1,300 mm Working area: 560 x 1,300 mm Table surface: 4 T-slots (width: 18 mm, pitch: 125 mm) Rjdpfozf A R Hex Aa Isw Distance from table surface to floor: 800 mm Max. table load: 900 kg Spindle (Cabezal) Spindle speed: 50 – 15,000 rpm Speed ranges: Two ranges, infinitely variable speed Motor: 22 / 18.5 kW (10 min / continuous rating), VAC type Torque: 199 N·m Spindle taper: 7/24 taper, No. 40 Spindle bearing inner diameter: 70 mm Feedrates (Avances) Rapid traverse rate (X, Y axes): 40,000 mm/min Rapid traverse rate (Z axis): 32,000 mm/min Cutting feedrate (X, Y, Z axes): 1 – 32,000 mm/min Automatic Tool Changer - ATC Changer type: Twin-arm type (Double-arm) Tool shank: MAS BT40 Retention knob (Pull stud): MAS Type 2 Magazine capacity: 32 tools, random memory Max. tool diameter (adjacent): Ø 90 mm Max. tool diameter (without adjacent tools): Ø 125 mm Max. tool length: 300 mm Max. tool weight: 8 kgf Dimensions and Weights Machine height: 2,750 mm Floor space (Footprint): 2,470 x 3.105 mm Machine weight: 7,500 kgIncluded Options Chip conveyor: MAYFRAN MT 10 (Rear side discharge) Coolant through spindle - CTS: (15 bar, 20 L/min) Workpiece measurement probe: RENISHAW Tool length measurement and breakage detection probe: RENISHAW Tool Life Management function Helical cutting function Rigid tapping DNC-T1

Condition: excellent (used), Year of construction: 2011, Siemens Sinumerik 828D control system with ShopMill Travel ranges X/Y/Z: 1020 x 635 x 610 mm Redpezfx Uuofx Aa Iow Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Measuring probe

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Redpezfx T Defx Aa Iow Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 1,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis Bridgeport VMC 1000 was manufactured in 2003. It features an X-axis travel of 1,000 mm, Y-axis travel of 300 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN 530 control unit, a BT40 spindle holder, and a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 vertical machining center we have for sale. Contact us for further details. Additional equipment • Chip conveyor Technical Specification Redpfx Ajzfqacsa Isw Taper Size BT 40