Jadimex

Condition: used, 900mm steering wheels Automatic trainer Air pressure Fpsdpfxsyy R U Eo Aa Aof 11 kW motor 380V

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 176, functionality: fully functional, input voltage: 600 V, cutting height (max.): 150 mm, cutting width (max.): 1,600 mm, total length: 6,000 mm, overall weight: 4,100 kg, Equipment: CE marking, documentation/manual, motor brake, Fully functional machine for cutting timber and surfaces. Fpjdpfjyyvdxjx Aa Asf

Condition: used, Year of construction: 1993, cutting speed 15 - 125 m/min cross cutting section 260 mm band length 4.115 x 41 x 1,1 mm cutting width 260 x 260 mm Band Saw | KASTO - SSB 260 VA Fpedpfsywzxcjx Aa Asf The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VA

Condition: used, Year of construction: 1989, cutting speed 15 - 125 m/min cross cutting section 260 mm² band length 4.115 x 41 x 1,1 mm cutting width 260 x 260 mm Band Saw | KASTO - SSB 260 VA The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Fsdpsywzw Sefx Aa Aepf #Tags: SSB260VA | SSB-260VA | SSB260 VA | SSB 260VA

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Horizontal thin-cut band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm Fjdoywibrjpfx Aa Aspf * same as new *

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 5,840 h, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, control type: PLC-controlled, roller diameter: 1,400 mm, actuation type: hydraulic, total height: 3,540 mm, total length: 36,000 mm, overall weight: 15,700 kg, table height: 1,150 mm, Equipment: CE marking, Vertical bandsaw in very good condition, little used, high performance, automatic log sawing line. Fsdpfxsywgnio Aa Aepf

Condition: used, Technical data: Max cutting height: 300 mm Max cutting width: 675 mm Wheel diameter: 700 mm Blade adjustment range: 5140–5010 mm Max blade width: 40 mm Min blade width: 5 mm Worktable dimensions: 850x1100 mm Extraction port diameter: 110 mm Fpsdpfx Aeyv At Eea Aof Emergency stop switch Motor power: 3 kW Voltage: 400 V Overall dimensions: Length: 850 mm Width: 1280 mm Height: 2300 mm

Condition: used, total height: 2,500 mm, total length: 1,500 mm, total width: 2,450 mm, Weight: 3.000 kg Fodpfx Ajyu Sgksa Ajpf Price: On request - Documentation available: No - CE certificate present: No - Serial number: AB670 - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1050 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 330 - Max. cutting width to column [mm]: 600 - Max. total opening [mm]: 570 - Max. cutting height [mm]: 500 - Table width [mm]: 1150 - Table length [mm]: 1100 - Max. band saw width [mm]: 90 - Feed roller type: Automatic hydraulic - Extraction port diameter [mm]: 150 - Options: Tiltable fence - Transport dimensions: 1500mm x 2450mm x 2500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 800 mm, Equipment: CE marking, – DTR technical documentation in Polish TECHNICAL PARAMETERS: – flywheel diameter: 815 mm – max. cutting height: 500 mm – max. cutting width: 800 mm – table dimensions: 1030 x 600 mm Fedpfeyuf Tqjx Aa Aepf – table tilt: 0° – 20° – blade dimensions: 5643 x 38 x 0.65 mm – blade speed: 20 m/s – motor power S1: 4.5 kW – large tilting cast iron table – high-quality steel construction – precise bandsaw guidance system above and below the table – rubber-coated wheels for extended bandsaw blade life – overall dimensions (L/W/H): 122 / 77 / 254 cm – weight (net/gross): 680 / 770 kg

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Fpjdpfx Aajyub Hme Ajf Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 - Saw direction: vertical Fodpfeyrpmcjx Aa Aepf - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), Year of construction: 1974, machine/vehicle number: 720, power: 11 kW (14.96 HP), Robinson EF/T Machine no. 720 Year of manufacture: 1974 Robinson heavy-duty saw 36″ diameter wheels 3″ saw blade (75 mm) 11 kW / 15 HP motor Motorized feed Central lubrication system Quick-adjust pressure blade guides Deep roll fence 3 different speeds via toothed belt drive *incl. 1 saw blade Fjdoyqxhgopfx Aa Aepf

Condition: used, total height: 2,980 mm, total length: 2,000 mm, total width: 1,600 mm, Weight: 2.000 kg Price: On request - Documentation available: No - CE certificate present: No - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1220 - Max. cutting to feed roller opening [mm]: 210 - Max. cutting to stop opening [mm]: 390 - Max. cutting width to column [mm]: 650 - Max. total opening [mm]: 600 - Max. cutting height [mm]: 380 - Table width [mm]: 1150 - Table length [mm]: 1200 - Max. band saw width [mm]: 120 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 250 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 45 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 2000mm x 1600mm x 2980mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fjdpfjyna Dwox Aa Ajpf Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Details: - └ Description: Shaft of the drive rollers is loose with the machine Fpsdpfx Aaeym Rt Hs Aef - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, cutting diameter 1600 mm saw band length 14000 mm cutting width 1600 mm hydraulic motor 3 kW total power requirement 11 kW / 7525 Nm weight of the machine ca. 20 t required space 4020 X 2220 X 7600 mm Custom-made: KSY 1600 × 1600 horizontal band saw Technical specifications: - Max. cutting diameter: 1,600 mm - Saw blade length: 14,000 mm - Cutting width: 1,600 mm - Machine weight: approx. 20 t - Installation dimensions (L × W × H): 4,020 × 2,220 × 7,600 mm Delivery time: approx. 5 months Customised adaptations in terms of dimensions and design are possible by arrangement. Optional equipment: - Clamping devices (choose from conventional, semi-automated or fully automated) - Motorised roller table system - Laser cutting line display - Additional double roller table Fpsdpfxoymf Rgs Aa Ajf - PLC control with operating screen - Vibration damping system

Condition: new, cutting diameter 1600 mm Fpedsymf N Aopfx Aa Ajf saw band length 11000 mm cutting width 1,6 mm capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a different size.

Condition: new, Year of construction: 2026, The CORMAK HBS421 wood band saw is designed in a vertical configuration, allowing convenient material guidance across the table and enabling both straight and curved cuts. In production environments, rigidity is crucial—therefore, the body and main structural components ensure stable wheel alignment and, consequently, smooth and accurate blade tracking. Drive Wheels and Blade Guidance In professional band saws, cutting quality largely depends on the geometry of the blade guidance system. Properly selected drive wheels ensure correct blade operation along its entire length, reduce slippage, and limit localized overloads. In practice, this results in: Reduced vibration at higher feed rates Improved edge quality—especially in harder wood species Extended blade life thanks to stable operation and correct tension Worktable and Angle Adjustment The worktable provides material support and cutting repeatability. In the CORMAK HBS421 wood band saw, both stability and adjustment capability are essential, allowing for angled cuts. This solution is particularly valued in carpentry workshops where quick transitions between different operations (sizing, structural component preparation, trimming) are required. Drive System and Continuous Operation The band saw drive system is designed for load-intensive operation, while the three-phase power supply enhances smooth running and torque stability. As a result, this vertical wood band saw maintains cutting performance even when processing thicker materials—an important factor in serial production. Adjustable blade speeds allow optimization for specific tasks, reducing edge burning and improving cutting control. Dust Extraction and Workstation Ergonomics Cutting wood generates significant amounts of dust and chips. The integrated dust extraction port enables connection to an extraction system, which significantly improves: Work safety (reduced airborne dust) Visibility of the cutting line Service life of working components by limiting dust accumulation Precision and Productivity In industrial practice, it is not only the ability to cut material that matters, but also maintaining repeatability. The rigid construction, stable blade guidance, and controlled blade tension ensure straight cuts and reduce the need for corrections in subsequent processes (planing, sanding, fitting). As a result, the CORMAK vertical wood band saw supports shorter production cycles and minimizes material waste. Standard Equipment High-voltage release switch Dust extraction port 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Optional Equipment 100 mm extraction hose Galvanized clamp Mobile base (up to 260 kg capacity) Technical Specifications Wheel diameter [mm]: 480 Fodpfxsyk Apno Aa Ajpf Maximum cutting height [mm]: 240 Maximum cutting width [mm]: 405 Blade width [mm]: 9.5 – 38.1 Blade length [mm]: 3345 Blade speed [m/s]: 7 / 14 Table tilt range [°]: 0 to +45 Table dimensions [mm]: 535 × 435 Overall dimensions [mm]: 830 × 550 × 2070 Weight [kg]: 160 Motor power: S1 – 2.2 kW / S6 – 3.1 kW Power supply: 3-phase, 400 V Manual (DTR): Yes CE Declaration: Yes

Condition: new, Year of construction: 2026, The CORMAK HBS321 vertical wood band saw operates in a vertical configuration, providing the operator with full control over guiding the material across the worktable. A key component is its rigid frame, which maintains the geometry of the wheel and guide system. This ensures smooth blade tracking and consistent cutting accuracy. In practice, this means a lower risk of blade drift—particularly important when cutting harder wood species or working at greater cutting heights. 350 mm Wheels and Blade Tracking Control Cast Iron Worktable and Angle Adjustments Fpsdpfx Aaoyk Alij Ajf The band saw features a 545 × 400 mm worktable, providing adequate support for workpieces—essential for precise straight and angled cuts. The table tilt range of 0–45° allows for bevel cuts without the need for additional attachments. The cast iron construction effectively dampens vibrations, helping maintain stable operating parameters. Drive System and Operating Parameters This woodworking band saw is equipped with a motor rated at 1.1 kW (total power), ensuring stable performance for typical carpentry tasks such as ripping, trimming, preparing components for gluing and assembly, and contour cutting. The use of blades with widths ranging from 6–15 mm allows the operator to select the appropriate blade depending on the task—from precise curved cuts to stable straight-line cutting. Laser – Enhanced Control and Reduced Material Waste The integrated laser guide supports quick material alignment and accurate cut tracking. In practice, this reduces the need for test cuts, minimizes material waste, and makes working with detailed elements (e.g., profiled components or shaped cutouts) easier and more efficient. Precision and Work Efficiency In professional applications, repeatability is just as important as cutting capability. The rigid construction, stable table, and quick blade adjustment system reduce machine setup time and limit the need for corrections during subsequent processing stages (planing, sanding, fitting). As a result, the CORMAK HBS321 band saw supports smooth workflow and improves overall process efficiency. Applications The HBS321 wood band saw is designed for a wide range of woodworking and wood-based material applications, including: Cutting boards, squared timber, beams, and glued elements Trimming furniture and carpentry components Angle cutting (using the tilting table) Cutting shapes and profiled elements Workshop use in carpentry shops, craft businesses, and training facilities Technical Specifications Wheel diameter [mm]: 350 Maximum cutting height [mm]: 175 Maximum cutting width [mm]: 300 Worktable dimensions (L × W) [mm]: 500 × 400 Table tilt [°]: 0 to +45 Blade width [mm]: 6 to 15 Blade length [mm]: 2240 Blade speed [m/s]: 6 / 12 Overall dimensions (L × W × H) [mm]: 750 × 650 × 1730 Gross weight [kg]: 88 Motor power [kW]: S1 – 0.75 kW / S6 – 1.1 kW Power supply [V]: 230 Manual (DTR): Yes CE Declaration: Yes Standard Equipment On/off switch with low-voltage release Quick blade tension/release lever Precision rip fence Cutting blade 2560 × 10 TPI 6.3

Condition: used, Year of construction: 2020, machine/vehicle number: 31213, functionality: fully functional, input voltage: 400 V, cutting height (max.): 570 mm, cutting width (max.): 880 mm, overall weight: 700 kg, table height: 950 mm, saw band length: 6,400 mm, table length: 1,030 mm, table width: 770 mm, For sale: Professional Centauro CO900 band saw, purchased new in 2020, very lightly used and in excellent technical condition. The machine was used occasionally, not for serial production, making it ideal for a joinery workshop or manufacturing plant. Fpedpeyhhytofx Aa Asf Key technical specifications: • Wheel diameter: 900 mm • Max. cutting height: 570 mm • Max. cutting width: 880 mm • Blade length: 6400 mm • Motor power: 5.5 kW (7.5 HP) • Table dimensions: 1030 × 770 mm • Table height: 950 mm • Weight: approx. 700–750 kg • Voltage: 400V / 50Hz • Mechanical/foot brake • Blade tension indicator • Extraction connection: 2 × Ø120 mm The machine is in full working order and ready for immediate use. The only drawback is the good but not perfect visual condition, as a result of slight surface rust, mainly on the worktable. This is due to the machine standing unused in an unheated room for the past several months. Delivery available at an additional cost. 23% VAT invoice issued. Net price, negotiable. A set of several saw blades included with the machine.

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, PRIMULTINI bandsaw model 1600 in very good working condition. 2 units available. I speak Italian, Bosnian, and Serbian. 1 PRIMULTINI manufactured in 2016 and 1 unit manufactured in 2017. Fpjdpfsyha A Tox Aa Asf

Condition: used, Automatic Horizontal Bandsaw Year: 2011 Serial Number: 11042134 Model: LX – 460AE Blade Size: 4770MM x 41 MM x 1.3MM Fsdpeydv Rrofx Aa Aopf Hydraulic Cutting Capacity: 460MM x 430MM

Condition: like new (used), Year of construction: 2025, Flexible horizontal band resaw with tiltable conveyor Modern resaw with impressive features : Cast iron dynamicly balanced wheels Hydraulic blade tension Inverter controlled feed system Fsdpsydk Hnefx Aa Aopf Automatic pressurised lubrication system with reservoir tank External control panel 22.0 KW motor - latest IE-3 energy efficient motor Tilting conveyor up to 45 degrees * very suitable for shiplap cladding, wall cladding * Maximum material size (W X H): 300mm x 300mm Feed speed (variable): 0~18 m/min same as new

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, power: 22.5 kW (30.59 HP), cutting height (max.): 990 mm, cutting width (max.): 1,100 mm, total height: 3,000 mm, total length: 13,100 mm, total width: 2,090 mm, table height: 950 mm, saw band length: 6,320 mm, saw band width: 100 mm, table length: 11,070 mm, table width: 1,400 mm, Used Holzhäuer Wide Band Saw – 22.5 kW Machine Data: Manufacturer: Holzhäuer Model: Mobilsäge HD90 Machine type: Stationary wide band saw for wood Year of manufacture: 2006 Availability: from calendar week 08/2026 Fpodpfxoycwncs Aa Aef Technical Specifications: Max. log diameter: 1,400 mm Saw band length: 6,320 mm Band width: 100 mm Motor power: 22.5 kW Scorer: yes Hydraulic stops: 4 units Manual stops: 2 units Operation: Joystick – up to 12 functions Extraction connection: yes Condition & Maintenance: Machine in used condition due to daily operation. Hydraulic pump unit replaced in 2025. Known defects: 1. Bent support surface 2. Digital cutting thickness setting defective → Optical scale retrofitted All details regarding defects and maintenance given to the best of our knowledge, errors excepted. Inspection of the machine possible.

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Fsdpeycuqnsfx Aa Aspf Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: used, Year of construction: 2022, machine/vehicle number: 15084, functionality: fully functional, cutting width (max.): 420 mm, empty load weight: 3,100 kg, cutting length (max.): 200 mm, saw blade length: 5,500 mm, motor model: IE3, Equipment: documentation/manual, SECOND-HAND TS 400 THIN CUTTING HORIZONTAL BANDSAW CE RULES TECHNICAL DATA: SPECIAL DEVICE "OFFSET": DEVICE "DOUBLE SPEED": - Max. cutting capacity 420x200 mm - Distance from blade to conveyor 2-150mm - Min. cutting thickness from the top 0.75 mm - Saw wheel diam. 800 mm. - Saw wheel thickness 50 mm - Sawblade length 5500 mm. - Sawblade width 50 mm. - Sawblade speed 17-34 m/s - Conveyor belt size 400x4200mm - Oil mist cooling system Fpsdeyam U Topfx Aa Aof - High accuracy hydraulic blade tension system (2500 kg) - Variable feed speed 0-25 m/min - Feed motor 2HP with inverter - Main motor 30 HP with inverter - Blade lift motor 2 HP - Dust hood outlet diam. 125 mm x 2 - Machine net weight Kg. 3100 - Air loaded pressure roller - Slow cutting start function - Spraying jets for blade lubrication - Motor IE3 INCLUDED - S/N 15084 - Year 2022