Precisteh Doo

Condition: used, Year of construction: 2004, operating hours: 77,366 h, STAMA MC 326/TWIN-Plus – Technical Specifications General Information: Manufacturer: STAMA Maschinenfabrik Model: MC 326 / TWIN-Plus Year of Manufacture: 2004 Control Unit: Siemens Sinumerik (840D Powerline) Machine Type: Twin-Spindle Vertical Machining Center Working Range / Travels: X-axis: 520 mm (Standard for MC 326) Y-axis: 300 mm (Standard for MC 326) Z-axis: 360 mm (Standard for MC 326) Spindle Distance: 200 mm (Distance between the two spindles) Milling Spindles (Twin Setup): Number of Spindles: 2 (Simultaneous operation) Max. Spindle Speed: 10,000 / 12,000 RPM (Typical for this model) Tool Taper: HSK-A63 Tool Changer: Type: Chain magazine Dkedeyh Nruopfx Afnoh Magazine Positions: 2 x 20 or 2 x 30 slots (Independent magazine for each spindle) Performance & Electrical: Connection Voltage: 400V / 3~ / 50 Hz Nominal Current: 72 A Operating Hours: 77,366 hours (Shown on meter) Dimensions & Weight: Machine Weight: approx. 6,500 kg Footprint: approx. 3.0 m x 4.2 m x 2.8 m (Excluding chip conveyor) Equipment & Features: Twin-Spindle Technology: Massive productivity boost by machining two workpieces at once. Control: Siemens 840D with full alphanumeric keyboard. Table: Stationary table for mounting fixtures or rotary units. Chip Management: Integrated bed flushing and chip disposal area.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 8,596 h, travel distance X-axis: 820 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3s Huron VX8 DNU was manufactured in 2019, featuring a table size of 1,000 x 530 mm and a load capacity of 500 kg. With an X-axis travel of 820 mm and a rapid traverse speed of 24,000 mm/min, it offers efficient machining capabilities. Consider the opportunity to buy this Huron VX8 DNU vertical machining centre. Contact us for further details. • Spindle hours: 2,586 • Table size: 1,000 x 530 mm • Rapid traverse speed: 24,000 mm/min • Spindle motor power: not specified • Tool magazine: 24-position random arm • CNC: Siemens 828D ShopMill • Air-conditioned electrical cabinet • Electronic handwheel Dkodpfx Afjyh Hh Teneh • Ethernet connection • High-flow coolant system: 50 L/min • Preparation for through-spindle coolant • Wash-down gun • Air blow through nozzles • Condition: Excellent; very good appearance Additional equipment • Chip conveyor + chip bin • Isolation transformer • 28 tool holders and cutting tools • 2 complete sets of collets • Clamping elements set • Machine vice • Technical documentation and CD-ROM Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2005, operating hours: 108,310 h, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Year of manufacture: 2005 Heidenhain iTNC 530 Machine ON: 108,310 h, Spindle ON: 34,700 h - Milling head manual swivel/clamp - Main spindle 18,000 rpm - SK 40 - 16 tool positions - Rotary/angle table - Standard coolant system Dsdpfoyhv Eqsx Afnekh - Chip tray - Observation windows - German documentation - Heidenhain measuring probe - Electronic hand control module - Chip flushing gun - Air blow-off device - Central blow air - U 740 with fixed table

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 83156, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: DECKEL GRUNDIG MILL PLUS, spindle speed (max.): 6,300 rpm, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Table length: 1,100 mm Table width: 650 mm Milling head indexing (B): 90° Number of tools: 25 Tool diameter: 80 mm Diameter with adjacent free positions: 160 mm Maximum tool length: 315 mm Tool holder: ISO 40 Maximum spindle speed: 6,300 rpm Feed rate: 1–15,000 mm/min Rapid traverse: 15 m/min Spindle motor: 16.2 kW MACHINE DETAILS Control: DECKEL GRUNDIG MILL PLUS Dkodpfoyhnkxjx Afnjh Total power requirement: 29 kW Dimensions & Weight Dimensions (L x W x H): 3,100 x 2,300 x 2,500 mm Machine weight: approx. 5,500 kg EQUIPMENT Coolant system Lighting

Condition: used, Year of construction: 2021, Dahlih DMX320 4+1 Machining Centre with Fanuc Series Oi-MF, Table Size 320mm dia, Travel (X/Y/Z)=600/550/500mm, 15000rpm Spindle, 40 Position ATC, 20 Bar Through Spindle Coolant, Qty of Spindle Tooling as Lotted. S/No. 3013010024 (2021) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Djdpfx Ajyhdd Iofnjkh

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast Dkjdpfx Afeyhcvienjh • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2007, CNC Machining Centre DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D Technical specifications: X-axis: 835 mm Dodpfxoyhbx Aj Afnskh Y-axis: 510 mm Z-axis: 510 mm Table size: 1000 x 560 mm Spindle speed range: 20 to 10,000 rpm 3D path control Tool holder: SK40 Tool changer with 30 positions

Condition: used, Year of construction: 2007, Immediately available ex works: CNC Vertical Machining Center CHIRON Model: Mill 2000 highspeed Year of manufacture: 2007 Control: Siemens Sinumerik 840 D Clamping area: 2600 x 550 mm Travel (X/Y/Z): 2000/500/550 mm Reinforced spindle drive: 47.2 kW, 17 kW at 100% duty cycle Spindle speed: 20 – 12,000 rpm Spindle taper: SK 40 2 x 4th axis with horizontal faceplate Tool changer: 40 positions instead of 24 Drilling capacity: 45 mm, Tapping: M 33, Milling capacity: 700 cm³/min Fixture table: 100 mm deeper Through-spindle coolant (IKZ) Coolant unit HL 450/900 Chip conveyor Rotary table package with horizontal faceplate, fully assembled NC rotary table, 280 mm diameter Remote diagnostics and teleservice Portable mini handwheel High-speed package on all axes, rapid traverse 60 m/min 2 x extraction units as air cleaners Probe for automatic in-machine measurement Renishaw probe package OMP 40 X-axis bellows in stainless steel Central partition wall Numerous tools and holders Weight: 13.5 t Dsdpfx Aoyg Epijfnekh Offered at EURO 17,500.— plus VAT ex works.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 220 294-0025, travel distance X-axis: 1,650 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, controller model: HEIDENHAIN TNC 426 PB, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Dksdpfx Afjyg Dmmensh X-axis travel: 1,650 mm Y-axis travel: 810 mm Z-axis travel: 810 mm Spindle taper: ISO 40 Spindle speeds: 30 - 6,000 rpm Spindle motor: 17 / 20.5 kW Number of tools: 2 x 16 Table dimensions: 1,800 x 780 mm Number of T-slots: 5 Rapid traverse x/y/z: 20 m/min MACHINE DETAILS Control: HEIDENHAIN TNC 426 PB Dimensions & Weight Space required: approx. 5,585 x 2,440 x 2,360 mm Machine weight: approx. 11,400 kg EQUIPMENT 2x tool magazine with 16 positions each Chip conveyor Cooling system Operating manual

Condition: used, Year of construction: 2008, number of spindle speeds 10.000 U/min numbers of positions in the tool changer 60 tool taper SK50 control HEIDENHAIN - iTNC 530 5-axis simultaneous machining center | DMG - DMU 80P duoBlock equipped with NC rotary table and swivel head (B-axis), 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Tool measurement The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU80PduoBlock | DMU80 P duoBlock | 80P Dkedpfx Afjygm T Njnjh

Condition: good (used), Year of construction: 2011, operating hours: 12,113 h, functionality: fully functional, machine/vehicle number: 702110, spindle speed (max.): 50,000 rpm, operating hours of spindle: 7,805 h, spindle motor power: 1,800 W, number of slots in tool magazine: 13, Tip stroja 5-osna CNC dentalna glodalica Dkedeygl Npjpfx Afnoh Snaga spindle (kontinuirana) 1,8 kW Maksimalna brzina spindle 50.000 rpm Radni sati spindle 7.805 h Tip stezanja alata HSK-E25 Broj alata (ATC) do 13 Maks. angulacija osi A ±25° Maks. angulacija osi B ±45° CNC kontrola DATRON proprietary kontrola CAM / ulazni format Standardni CAD/CAM (G-code) Upravljanje Touchscreen / iPad sučelje

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 9,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine. Djdpeyglh Ejfx Afnokh • Tool interface: HSK-A63 • Tool magazine: 30 positions Additional equipment • Chip conveyor • Complete set of tool holders and tools (as shown in photos) • BILZ ThermoGrip shrink-fit system with CoolDown (induction device for mounting/dismounting tools in shrink-fit holders; manufacturer: BILZ)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, controller model: FANUC Oi-MD, table width: 420 mm, table length: 900 mm, number of spindles: 2, number of slots in tool magazine: 20, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, 4th axis: rotary table included; Dkjdpfx Afsygg Itjnsh

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Oil mist extraction Internal coolant supply Dkodpfxjyfum Ue Afneh

Condition: used, Year of construction: 2006, functionality: fully functional, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions : 1000 x 560mm Table load capacity: max. 800kg Workpiece height max: 720mm Tool positions: 20 Tool holder: SK40 Dkjdpfxsyftvbe Afneh Weight: approx. 4,500kg Accessories/options: Chip conveyor Documentations Remote control Tool holders

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Dksdpfx Afsyfgtajnjh Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 8 000 min⁻¹ Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Condition: excellent (used), Year of construction: 2011, CNC Control: FANUC Series 31i-A5 X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis rotation (mm): +160 / -180 C axis rotation (degrees): 360 Number of pallets: 1 Table dimension (mm): Ø500 Table load capacity (kg): 300 Cutting feed rate X, Y, Z (mm/min): 50,000, 50,000, 40,000 Maximum rapid traverse X, Y, Z (m/min): 50, 50, 40 Spindle speed (rpm): 12,000 Dkodpfx Asydh Hljfnjh Spindle power (kW): 18.5 / 15 Taper type: BT-40 Spindle torque (Nm): - Tool changer type: Chain Number of tool positions: 61 Max. tool diameter (mm): 90 Max. tool diameter with adjacent positions empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Rotary table with digital readouts Included Work light Included Through-spindle cooling Included Electronic handwheel included on CNC panel Coolant oil skimmer Tool life management 3D tool compensation Cylindrical interpolation MORI-APM programming software LANG Palletizing System MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: good (used), Year of construction: 1997, functionality: fully functional, Dahlih MCV-1500 – Technical Specifications Machine Type: Vertical Machining Center Dsdpoycqx Uofx Afnekh Manufacturer: Dahlih Model: MCV-1500 Axis Travels X-Axis: approx. 1,500 mm Y-Axis: approx. 630 mm Z-Axis: approx. 700 mm Spindle Spindle Taper: BT / ISO 50 Spindle Motor Power: approx. 15–17 kW Max. Spindle Speed: approx. 4,500 rpm Tool System Automatic Tool Changer: approx. 24 tools Table Table Load Capacity: approx. 1,300–1,500 kg (depending on configuration) Control System Typically equipped with Fanuc CNC control

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 800 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: 31i-B5, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, tool weight: 8,000 g, number of axes: 5, This 5-axis CHIRON FZ18W was manufactured in 2019, featuring a FANUC 31i-B5 control system and continuous 5-axis control. It boasts a spindle speed of up to 12,000 rpm, a tool capacity of 70, and rapid traverse rates of 75 m/min. Ideal for complex machining tasks with its automatic pallet changer and dual rotary tables. If you are looking to get high-quality milling capabilities consider the CHIRON FZ18W machine we have for sale. Contact us for more information. • Number of axes: 5 (X, Y, Z + 2 rotary axes via pallet/rotary table) • Spindle: • AC spindle motor: 7.5 kW (100% duty), 22.0 kW (10% duty) • Max torque: 140 Nm • Taper: HSK-A63 (DIN 69893) • Drilling capacity: Ø 42 mm • Tapping capacity: M30 • Milling capacity: 500 cm³/min (steel E355) • Tool changer: • Type: Fully enclosed chain magazine • Capacity: 70 tools • Max tool Ø: 78 mm (160 mm with free adjacent positions) • Max tool length: 380 mm • Max magazine load: 240 kg • Tool change time: ~0.9 s • Chip-to-chip time: ~2.6 s • Feed rates & dynamics: • Rapid traverse (X/Y/Z): 75 m/min • Acceleration: 0.6 – 1.2 – 1.4 g • Drives: Direct digital drives with absolute measuring system • Machine functions/utilities: • Automatic washdown of work area and fixtures • Automatic centralized grease lubrication • Hydraulic unit: 200 bar • Compressed air treatment with filtration to 0.01 µm • Cooling unit for machine components • Measuring, monitoring, software: • FANUC 3D collision control • Tool monitoring and sister tool management • Electrical & interfaces: • Ethernet RJ45, USB, PCMCIA • Remote diagnostics: CHIRON remoteLine • Data monitoring & OEE: CHIRON dataLine • Compliance: CE Additional equipment (robots, automation, peripherals) • Automation/palletizing: • Automatic pallet changer IWV 0°/180° (change time ~3.5 s) • Rotary table ATU 200, 2 units • Positioning accuracy/repeatability: ±5″ • Max clamping torque: 1,200 Nm Dkodpfx Aoyaz Emjfnsh • Max load per side (APC): 250 kg • Max weight difference between pallets: 0 kg • Coolant and chip management: • Through-spindle coolant (predisposition) • High-pressure coolant system up to 30 bar • Coolant filtration: Drum filter TPF 350 S (50 µm) • Chip conveyor: Hinged belt • Coolant tank: 230 L • Pump: 250 L/min @ 1.4 bar • Probing/tool control: • Renishaw RLP40Q probe (predisposition) • Laser tool breakage control (Single F1000)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Feed rate Programmable up to 15 m/min - rapid traverse 30 m/min Dksdoyaywbepfx Afnsh Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Weight approx. 6.5 t

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Operating voltage: 400 v / 3-phase / 50 hz • Control voltage: 24 v • Total current: 44 a Djdpeyarzrjfx Afnokh • Magazine for 30 tools, sk40. Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,700 h, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 505 mm, controller manufacturer: FANUC, total height: 2,735 mm, table load: 500 kg, overall weight: 4,850 kg, number of axes: 3, This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine. Additional equipment • Through-spindle cooling 20 bar with pump and tank Dksdjyarzfepfx Afnsh Machine Benefits Technical Machine Benefits • Machine in perfect working order and very accurate • Table size: 425 × 950 mm • T-slots: 18 mm × 3 × 100 mm • Tool changer: 22 tools (arm-less) • Equipped with renishaw ts27r automatic tool setter • Includes several mat bt40 tool holders and a vise Extra Information Power Capacity: 15 kVA Air Pressure: 6–8 bar Dimensions Machine Depth 2435 mm

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,243 h, functionality: fully functional, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 620, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 810 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm Table width: 900 mm Table length: 400 mm Spindle speed (max.): 10,000 rpm Number of spindles: 1 Number of tool magazine positions: 23 Tool holder: BT40 MACHINE DETAILS Control unit: Heidenhain TNC 620 Total weight: 3,500 kg Input voltage: 400 V Controller on-time: 25,243 h EQUIPMENT Documentation/manual Continuously adjustable speed Chip conveyor Internal coolant supply: 20 bar Dedpsyaq Siefx Afnskh Disc wiper in coolant tank Air blast cooling through spindle or external External coolant gun Spiral chip conveyor Centralized lubrication

Condition: used, Year of construction: 2010, x-travel 1.050 mm y-travel 530 mm z-travel 510 mm Control MSX-504 IV Mori Seiki turning speeds max. 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle bearing diameter 70 mm distance spindle /table 150 - 660 mm table surface area 1.350 x 600 mm max. table load 1.000 kg T-slots 6x 18 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool 1,3 sec change-time chip to chip 4,1 - max. 9,2 sec Dksdpfsx R Enzjx Afnjh rapid traverse ( X / Y / Z ) 36 / 36 / 20 m/min feed speeds 1 - 5.000 mm/min Tipp feed 0 - 5.000 mm/min total power requirement 27 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 3,5 x 3,0 x 2,8 m CNC - Machiningcenter Vertical MORI SEIKI - DuraVertical 5100 -618

Condition: used, Year of construction: 2013, x-travel 835 mm y-travel 510 mm z-travel 510 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min feed power 5.000 N total power requirement 28 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,8 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 40.108h operating hours, 12.656h spindle hours - incl. Lehmannn 4th Axis Dedpfxox R Enue Afnokh - incl. Lehmann tailstock - incl. 20x SK 40 tools