PHU "POLAK" Karol Polak

Condition: ready for operation (used), Year of construction: 2010, Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details. • Working height adjustment • Pre-selection of pressing time • Press area control Nwsdpfxoy Hrv De Akcof • System configuration: Integrated assembly line setup (total length approx. 26 m including entry section) Additional equipment • Cross-transport belt drive • Light curtain safety with 4-way muting

Condition: used, functionality: fully functional, mileage: 474,980 km, power: 338 kW (459.55 HP), first registration: 08/2022, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Nwedpfxoy Hru Ho Akcjf Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Engine Brake Type: Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with sun sensor Driver Seat: Comfort 4: suspended - belt in seat Passenger seat: Comfort 4: suspended - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor

Condition: used, This HOBART dishwasher, model CARES-10C, is being auctioned in our industrial auction / machinery auction Metzgerei Böhmfelder – warehouse clearance including, among others, combi steamers, stainless steel furniture, and butchery accessories, via online auction. Nedoy Hru Tepfx Akcswf

Condition: excellent (used), Year of construction: 2008, operating hours: 75,979 h, functionality: fully functional, Screw compressor Atlas Copco ZR90VSD Integrated frequency inverter. 90 kW Nwedpfxoy Hrumj Akcjf 9 bar 15.50 m3/min Year of manufacture: 2008 Operating hours: 75,979

Condition: ready for operation (used), Year of construction: 2016, Edgebander manufactured in 2016. This HOMAG KAL 370 features a continuously adjustable feed speed of 18-20 m/min and accommodates workpiece thicknesses from 8 to 60 mm. It includes advanced gluing and trimming units, as well as a comprehensive software package for efficient operation. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG KAL 370 machine we have for sale. Contact us for further details. • Feed speed: Continuously adjustable 18–20 m/min • Fixed stop side: Left • Workpiece thickness: 8–60 mm • Workpiece overhang: 30 mm • Throughput equipment: Pre-installation for Boomerang TFU140 • Feed lock: Available • Feature packages: Future-Paket 5; Foil/High-Gloss Package (bottom) • Infeed features: Sliding carriage; Workpiece alignment at infeed; Workpiece support with roller track; Infeed barrier • Workpiece transport: Transport device; Top pressure • Cleaning/Prep: Release agent spraying unit (top/bottom) • Jointing/Milling: Joint trimming unit; I-System-DIA jointing cutter set WD60; Workpiece pre-heating (up to 60 mm thickness) • Gluing: Gluing unit; Preparation for Airtec activation unit; Adhesive application system; Application units QA60 and PU60; Pressure tank for PU application unit • Magazine/Pressure: Edge magazine; Pressure zone • Spraying: Lubricant spraying unit (top, bottom, side) • Trimming/Milling: Snipping unit HL81 (bevel/straight, 0.8 kW); Pneumatic adjustment for flush/overhang trimming; Pre-milling unit BF10; HM milling cutter set (straight); Form milling unit FK11 Nedey Hrtpspfx Akcjwf • Tooling/Changeover: I-Exchange head system (automatically adjustable/FK); I-DIA radius cutter set (for FK, R=2 mm, Z=4); Standard milling unit SF21; Multi-profile scraper MN21 (automatic); Profile knife set for MN20/21 • Additional units: Joint scraper FA20 BASIC; Automated scanning for joint FA20; Buffing unit FA06 (top/bottom); Powercontrol PC23 Powertouch • Control/Software: Software package WoodCommander; Antenna sequence control; Machine data acquisition and evaluation; Error diagnosis; Teleservicenet-soft • System/Networking: Emergency stop interlock; Network connection (Ethernet); Manual control for setup mode; Language: German • Documentation: On data carrier and paper Additional equipment • Boomerang return system TFU140/20/08-Optimat • Workpiece detection (sensor-based) • Basic outfeed return line • CE for cells (systems)

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, overall weight: 12,000 kg, Special Equipment for the Machine: - 1 Extension of the tool magazine from the standard 30 tools to 210 tools, including preparation for 240 tools - 1 Pallet rotary storage system for 10 pallets, including setup station - Number of pallets: 10 - Pallet diameter: 130 mm - Pallet mounting: Capto C6 - Maximum workpiece size: Ø 250 x H 250 mm - Maximum workpiece weight: 40 kg - Pallet clamping force: 22.5 kN - 1 HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor - Maximum spindle torque: 70 Nm up to 1,500 rpm - Including weekly timer for initiating spindle warm-up cycle and automatic machine shutdown - 1 Spindle holder HSK 63A - 1 Direct path measuring system (Heidenhain) on X, Y, and Z axes, equipped with purge air - 1 KNOLL coolant system, consisting of: - Scraper-belt chip conveyor with lift pump, chip discharge to operator side Njdpfx Akoy Hrtcecewf - Coolant supply through the spindle with KTS25-50T pump, capacity 24 l/min at 70 bar, 5.5 kW - Coolant pressure adjustable in 3 stages - External coolant with coolant pump, capacity 100 l/min at 1.4 bar - Coolant shower with coolant pump, capacity 100 l/min at 1.4 bar - Compact filter KF200, filtering capacity 200 l/min - Dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m - Tank capacity: approx. 1,400 liters - 1 Cooling water recooler VWK 90 – D emulsion - Cooling capacity: 11.5 kW - Ambient temperature up to 42°C - Refrigerant: R407c - 1 Coolant spray gun in the working area, including pump and electrical installation - 2 Spiral screw conveyors - 1 TEBARON mechanical air filter TEB/BV2 for extraction of emulsion mist, oil mist, and smoke, consisting of: - 3-stage pre-filter pack - HEPA filter per DIN EN 60335-2-69 with BIA test certificate, separation efficiency >99.995% for particles ≥ 0.3μ - Meets category K1/K2 (carcinogenic substances and pathogens) and dust class H requirements - 1 Single support with base plate for ISI air filter TEB/BV2 - 1 RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, insertable into spindle via tool changer - Includes EASY PROBE SOFTWARE - Pressure gauge for tool length measurement and tool breakage monitoring Special Equipment for the Control: - 1 Increase in part coordinate systems from 6 to 54 - 1 Coordinate system rotation G68/G69 - 1 Chamfering and rounding of corners - 1 Automatic reference point transfer - 1 Resume contouring function - 1 Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 - 1 IZ2/150NF HSC precision controller for simultaneous 5-axis machining, including: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero-point transfer, up to 8 different zero points available (G54.2) - TCPC Tool Center Point Control for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined work plane (G68.2/G53.1/G69)

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 6,000 mm, grinding diameter: 800 mm, Cylindrical Grinding Machine STANKOIMPORT 3M196 / 6000 We offer a heavy-duty cylindrical grinding machine from STANKOIMPORT, model 3M196 / 6000. The machine is designed for machining large and heavy workpieces and is suitable for heavy industry, energy sector, shipyards and shaft production. 🔧 Technical data: Manufacturer: STANKOIMPORT Nwsdpfx Ajy Hrr Sjkcsf Model: 3M196 / 6000 Grinding length: 6000 mm Grinding diameter: 800 mm Center height: 410 mm Max workpiece weight: 10,000 kg Grinding wheel diameter: 750 – 900 mm Spindle taper: Morse 6 Dimensions (L x W x H): 12,000 x 3,000 x 2,500 mm Machine weight: 45,000 kg 📌 Description: Heavy-duty and rigid construction Suitable for continuous industrial operation Ideal for long shafts and large components Proven and reliable design 📍 Location: Poland 🚚 Terms: Price: on request Machine can be inspected Loading included Transport can be arranged

Condition: ready for operation (used), Year of construction: 2010, number of axes: 4, This 4-axis HOMAG BAZ 211/40K was manufactured in 2010. It features a vacuum clamping system with multiple configurations, a powerful vacuum pump, and a Flex5+ sawing, milling, and drilling aggregate. The machine is equipped with three tool changers and an edge banding package for enhanced processing capabilities. If you are looking to get high-quality CNC wood machining capabilities, consider the HOMAG BAZ 211/40K machine we have for sale. Contact us for further details. • Vacuum clamping system: 8x 120x50 mm (0/90°) K-Table • Rotating vacuum clamping system: 8x 125x75 mm (360°) K-Table • Vacuum pump: Reinforced 100/140 m³/h • Aggregate: Flex5+ sawing, milling, and drilling aggregate for tool changer (WZW) • Tool changers: 3x tool receivers for Flex5+ (WZW) • Edge banding package: Power EDGE 360° for BAZ 211/311 Venture • Edge processing: Workpiece edge blow-off nozzle • Milling/Scraping: Combination flush milling and scraper aggregate (WD 60 mm) Nwjdpfey Hrr Eox Akcsf • Profile blades: 2x for scraper • Radius cutter head: 2x WPL radius cutter head • Material handling: Tool transfer station for B200/300/K • Software: Upgrade to woodWOP 6.0

Condition: used, Year of construction: 1993, Tools IV 68, 78, and preservation protection. Tenoning and slotting spindle – 3 tools Motor 7.5 kW Profiling spindle – 3 tools Motor 5.5 kW Nodpfoy Hrrxox Akcjwf

Condition: used, mileage: 151,321 km, power: 96 kW (130.52 HP), first registration: 09/2019, fuel type: diesel, wheelbase: 3,680 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 5,870 mm, total width: 2,070 mm, total height: 3,250 mm, Year of construction: 2019, Equipment: air conditioning, central locking, cruise control, power mirror, = Additional options and equipment = - 12-volt socket - Armrest - Heated exterior mirrors - Remote central locking - Radio/CD player - Rear-view camera = Further information = Nedpfx Akjy Hrrrjcswf Number of cylinders: 4 Engine displacement: 2,299 cc Unladen weight: 2,980 kg Payload: 520 kg Gross vehicle weight: 3,500 kg Body manufacturer: France elevateur 121 FT Registration number: 205519 Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 6,684 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-1HE-D was manufactured in 2020. It features a working area with X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine includes a maximum spindle speed of 8,100 RPM and comes equipped with a Renishaw OTS tool setter and a tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-1HE-D vertical machining centre we have for sale. Contact us for further details. • Electrical • Voltage: 400 V • Frequency: 50/60 Hz • Short circuit capacity: 10,000 A • Enclosure type: NEMA Type 2 (indoor use) • CNC / Control • HAAS CNC control • Control version: Aug 4, 2020 • Software release: 100.20.000.1101 • MOCON: 1.16.K • Machine data • Tool changes: 30,278 • Power cycles: 711 • Power on time: 6,684 hours • Active features / options • Macros • Rotation & Scaling • Rigid Tapping • M19 Spindle Orient • High Speed Machining • VPS Editing • Media Display • Max memory: 1 GB Nedpfxey Hrq Ue Akcjwf • Wireless Networking • Compensation Tables • Tooling/ATC • Tool magazine (ATC) • Standard HAAS control Additional equipment • Renishaw OTS tool setter • Machine vise

Condition: good (used), mileage: 136,000 km, Year of construction: 2022, Land Rover Discovery Sport P300E 1.5 R-Dynamic 2022 Automatic / Meridan Sound / Plug-in Hybrid Video can be sent via Whatsapp. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees. (see our general terms and conditions) For a viewing and/or test drive you can make a non-binding appointment. Please call in advance as we are not always present. Nwodjy Hrqzspfx Akcof Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 1991, functionality: unexamined, Max. cutting length: 4100 mm Air cushion tables Nwedpfx Aksy Hrqhecsf

Condition: ready for operation (used), Year of construction: 2002, This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine. • Workpiece clamping: • Self-centering product clamp, gripping the tube from the outside • Interchangeable clamping jaws for different tube/profile types • Adjustable clamp position for accurate alignment • Workpiece dimensions: • Max product width (single-sided punching): 100 mm • Max product height (single-sided punching): 80 mm • Max product height for through holes: 60 mm Nwsdpfxsy Hrp Re Akcof • Max travel of product clamps: 3,100 mm • Minimum distance from tube end to first punchable hole: 30 mm • Punching capacity: • Max punching diameter (as delivered, through holes): Ø40 mm • Punching station: Single vertical punching cylinder • Max punching force: 250 kN at 220 bar working pressure • Max vertical stroke of punching cylinder: 80 mm • Performance: • Max strokes per minute: Dependent on cylinder stroke setting and hole pitch • Clamp carriage travel speed: approx. 40 m/min • Positioning repeatability: ±0.1 mm • Machine size and range: • Punching machine working range: > 3.10 m • Support table length: 3.00 m

Condition: excellent (used), machine/vehicle number: YV2AS02F08A658333, mileage: 627,219 km, power: 324 kW (440.52 HP), first registration: 03/2008, fuel type: diesel, axle configuration: 8x2, wheelbase: 6,970 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 9,520 mm, total width: 2,530 mm, Year of construction: 2008, Equipment: crane, Structure Construction year: 2008 Crane Number of hydraulic extensions: 5 Remote control: ✓ Rotator: ✓ Meter capacity: 18 m Capacity kilo: 7650 kg = More information = General information Number of doors: 2 Cab: single Registration number: BT-XP-53 Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 15.580 kg Carrying capacity: 21.660 kg GVW: 37.000 kg Max. towing weight: 50.000 kg Functional Crane: HIAB 377 EP-5XS, behind the cab Make of bodywork: HIAB 377EP-5 HIPRO Maintenance, history and condition APK (MOT): tested until 09/2026 Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Nwjdpfsy Hrp Dex Akcof IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2006, overall weight: 403 kg, fuel tank capacity: 270 l, operating pressure: 10 bar, input voltage: 400 V, ATLAS COPCO GA 7 VSD ff screw compressor Mounted on 270 l pressure vessel Variable speed (inverter) With refrigerant dryer Motor 7.5 kW Capacity 1.21 m³/min Njdey Hrpwopfx Akcswf Pressure 13 bar Year of manufacture 2006

Condition: good (used), Boku SK 240 Spiral Mixer Nedpfx Aoy Hrpqskcswf - used - capacity: 240 kg dough - manual control - 2 speeds - bowl guard - machines from production - technically functional - offer includes 2 mixers + 12 bowls - collection from warehouse/shipping option - price on request

Condition: used, Year of construction: 1991, functionality: unexamined, 1 mortising unit 2.2 kW Work table 1000 x 310 mm Nedpoy Hrpkofx Akcswf Max. working depth 130 mm Weight approx. 750 kg

Condition: good (used), Year of construction: 2015, Ref. -No.: 10647 Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2015 Type of control: CNC Nwedsy Hrpdspfx Akcof Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Serial no.: 2903XXXX Machine-No.: 591XX X-Travel: 3600 mm Y-Travel: 1100 mm Z-Travel: 900 mm Max. Workpiece Weight: 8000 kg Max. Tool Weight: 5 kg Max. Tool Length: ab Spindelnase 300 mm Workpiece Diameter With 2 Vacant Positions: 130 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 120 Tool changer: 60 Spindle Speed: 20000 RPM Max. Torque: 288 / 187 Nm Rapid Travel X/Y/Z: 80 x 60 x 60 mm / min Main Drive: 35 / 25 kW Internal cooling: 40 bar coolant reservoir: 600 L. Further information: - Fixed table, often with an integrated NC rotary table (FD version) - Spindle: Standard speed is typically 10,000 rpm; more powerful variants are available as an option - Traveling column design: Ideal for pendulum machining and long workpieces - Stability: The mineral cast machine bed ensures high damping and precision - 5-axis: Usually equipped with an NC swivel milling head (B-axis) The machine can be viewed while powered on by appointment. Translated with (free version)

Condition: ready for operation (used), Year of construction: 1988, pressing force: 326 t, number of axes: 3, This 3-axis EHT EHPS 32-40 was manufactured in 1988. It features a pressing force of 3200 kN and a working length of 4050 mm, making it suitable for various bending applications. The machine is equipped with a Cybelec DNC control unit and safety features including vertical light curtains. If you are looking to get high-quality bending capabilities, consider the EHT EHPS 32-40 press brake we have for sale. Contact us for further details. • Working length: 4050 mm • Current type: 3-phase AC • Frequency: 50 Hz • Operating voltage: 380 V • Control voltage: 220 V • Nominal current: 70 A • Main fuse nominal current: 80 A Nodpfjy Hrn Tex Akcjwf • Wiring diagram no.: 209-179/115 • Control unit: Cybelec DNC (or similar graphic CNC interface) Additional equipment • Safety: Vertical light curtains (Fiessler/Sick style) • Safety: Side guarding Technical Specification Bending Length 4000 mm

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Njdpfx Akoy Hrn Hocswf Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: used, mileage: 279,700 km, power: 302 kW (410.61 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 12,490 kg, maximum load weight: 13,510 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,500 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,000 mm, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, Scania G410 6X4 hooklift truck First registration: 10/2014 279,700 km with documentation Short cab with emergency berth Opticruise transmission Air conditioning, auxiliary heater Trailer coupling 6X4 drive Rear axles with air suspension Wheelbase 4500 mm Tyres 385/65 R22.5, tread approx. 50% Tyres 315/80 R22.5, tread approx. 50% Hooklift system Meiller RK 20.70 Unladen weight 12,490 kg German vehicle, first-hand, in well-maintained condition. TÜV valid until October 2026. Export/net price: 44,900 Euro All information without guarantee, errors excepted. Nedpfxjy Hrnye Akcjwf

Condition: ready for operation (used), functionality: fully functional, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,200 mm, table width: 1,000 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nodpfxsy Hrnte Akcowf Spindle diameter: 100 mm Spindle taper: ISO 50 Table size: 1,120 x 1,000 mm Table load capacity: 3,000 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (max.): 5,000 rpm, quill diameter: 60 mm, quill stroke: 80 mm, ATTENTION: A total of 3 machines available. There are 2 additional identical machines with the same equipment (chip conveyor, etc.). EQUIPMENT - Chip conveyor for side mounting and chip bin - Short bar loader magazine - Interface for bar feeder device - Workpiece catch tray (parts catcher) - Chuck confirmation switch (open/close) - C-axis indexing - Driven tools - Programmable tailstock - Linear guides - Manuals Control: Fanuc 0i-TD Control power-on hours: 30,811 h Machining time: 7,738 h Spindle motor power: 15/7.5 kW Feed motor power X/Z-axis: 3.0/1.8 kW Milling spindle motor power: 3.7/2.2 kW Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Swing diameter over bed: 550 mm X-axis travel: 170 mm Z-axis travel: 335 mm Rapid traverse X/Z-axis: 36 m/min Main spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6,000 rpm Spindle bore diameter: 56 mm Max. bar capacity diameter: 45 mm Turret Number of turret stations: 12 positions Turret indexing time: 0.15 s Tailstock Quill diameter: 60 mm Quill stroke: 80 mm Taper bore/tailstock mounting: MT 4 Nwodpfxjy Hrngo Akcsf Milling Spindle Max. spindle speed: 5,000 rpm Bar feeder magazine Model: Fedek Machine Co. DH-65 Bar length min./max.: 280/1,200 mm Bar diameter: 5-65 mm Dimensions Dimensions (L x W x H): approx. 1,620 × 1,200 x 1,400 mm

Condition: used, Year of construction: 1980, Table length approx. 3000 mm Njdoy Hrnaspfx Akcowf 3 mortising units Pneumatic workpiece clamping