Die Schreinerwerkstatt Team Gronbach

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: TRK 3 5220A Fpsdsxwb Sgepfx Ah Eop Year of manufacture: 1994 Cutting length: 430 cm Cutting height: 220 cm Cutting depth: 80 mm Power: 4.4 kW Saw blade diameter: 300 mm Speed: 4,750 rpm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Fodpfx Ajxvz T Ieh Eepp Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, The machine is in very good condition. Fpodpfxexvybqs Ah Eop

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Fsdpext Sgtjfx Ah Ejpp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, cutting height (max.): 90 mm, cutting depth: 3,300 mm, TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Cutting depth (material pusher positioning): 3,300 mm Cutting height: 90 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Fpsdoxtfhwspfx Ah Ejp Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Other Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Machine height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at infeed) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Performance and Speeds Main saw motor power: 15 kW Forward saw unit speed: 5 – 120 m/min Return saw unit speed: 120 m/min Forward feed speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Reverse feed speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Fpsdsxranpopfx Ah Esp Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,250 mm, controller model: Power Control CADmatic 4.0, Set consisting of Holzma panel dividing saw and Bargstedt area storage system! Holzma HPP 380/43/43/R TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Main saw motor: 18 kW Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz MACHINE DETAILS Control: Power Control CADmatic 4.0 – control unit with 17-inch flat display Operating voltage: 400 V (+10%/-5%) / 50 Hz Total connected load: 29 kW EQUIPMENT Grooving program Cut-out and tension relief program Fodpfx Ahoxpu Rgs Eopp Labeling / labeling program / label printer PICA 108 Data interface for storage systems Cutting optimization software: Schnitt-Profit Professional Bargstedt Optimat TLF210/10/05 TECHNICAL DETAILS Carriage length: 13.45 m Span: approx. 12.5 m Upper edge of stack in storage: max. 1,700 mm Max. workpiece size: 4,200 x 2,070 mm EQUIPMENT Rotation drive 1 loading station and 1 unloading station

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight Fpsdpjxmk Ebjfx Ah Esp MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Machine no.: 211.178 Year of manufacture: 1998 With front and rear feed Fsdpfjxf Idxox Ah Eopp Technical data Saw length 4200 Pusher 4100 Setup 7×10 m (length×depth) Lifting table 6.5 tonnes

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 021.06.440, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, controller model: G-DRIVEAXS BASIC, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Saw blade protrusion: 105 mm Main blade diameter: 380 mm Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Fodsxf Eg Depfx Ah Eopp Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Return speed of pushers: 60 m/min MACHINE DETAILS Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading

Condition: excellent (used), Year of construction: 2003, operating hours: 12,608 h, functionality: fully functional, machine/vehicle number: 0-241-06-5232, cutting length (max.): 4,300 mm, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026. Fjdpfxsxfvp As Ah Espp

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 04946, cutting length (max.): 4,350 mm, saw blade diameter: 400 mm, cutting width (max.): 4,455 mm, saw blade bore: 80 mm, TECHNICAL DETAILS Fedpfx Asxcn Tush Eopp Max. cutting length: 4,350 mm Max. cutting width: 4,455 mm Max. cutting height: 110 mm Saw blade bore diameter: 80 mm Max. saw blade diameter: 400 mm Scoring unit: Yes Max. feed speed: 25 m/min MACHINE DETAILS Dimensions Dimensions (L x W x H): 7,600 x 1,400 x 1,800 mm Transport packages: 5

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0-240-14-5243, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Max. cutting length: 4,300 mm Max. cutting width: 4,300 mm MACHINE DETAILS Fpjdpoxcnv Aefx Ah Ejp Voltage: 400 V Power consumption: 38 A Fuse: 50 A EQUIPMENT Documentation available CE marking present

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0-341-07-8718, feed length X-axis: 3,800 mm, feed length Y-axis: 3,800 mm, feed length Z-axis: 85 mm, cutting length (max.): 3,800 mm, cutting height with scoring (max.): 85 mm, saw blade diameter: 420 mm, power: 14 kW (19.03 HP), For Sale: HOLZMA HPP 250/38/38 Beam Saw Year of manufacture: 2013 Model: Optimat HPP 250/38/38 Cutting dimensions: 3800 mm x 3800 mm Condition: very good, used in single-shift operation Maintenance: regularly serviced Equipment: PICA 2 label printer Without optimization software CutRite Power supply: 400V / 50Hz, 3-phase Maximum operating full load current: 26.8 A Fpedpfx Aow Ud Rueh Esp Control voltage: 24V The machine is in excellent working condition, immediately available, and can be inspected under power.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 0-240-05-2296, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, Holzma Hpp350/43/43, machine in working condition. Used in single-shift operation in a joinery workshop. Manufactured in 2012, factory refurbished in 2019. The machine is functional and has been regularly serviced. Includes CAD matic 4 optimization software and labeling software. Infeed tables are 280 cm long. The machine can be collected from February 2026. Work video available on request. Price €45,000 + VAT. Fedpfxew Sxb No Ah Eopp

Condition: excellent (used), operating hours: 565 h, functionality: fully functional, machine/vehicle number: 0-240-10-3388, incl. panel storage and loading system, Bargstedt, Type: OPTIMAT TLF210 /12 /12 Recorded operating hours: 565h Cutting length: 4300 mm Cutting width: 4250 mm (program pusher travel) Saw blade projection: 95 mm Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW POWER CONCEPT ANGLE CUTTING PACKAGE GROOVE CUTTING PACKAGE AUTOMATIC EJECTION FENCE (pushes panel remnants from the rear machine table to the front over the cutting line) Fpedpfx Ajw R Ur Ueh Eep LABELING PACKAGE CONTROL: POWER CONTROL: CADmatic 4-Professional DATA CONNECTION TO STORAGE SYSTEMS

Condition: used, Year of construction: 2008, operating hours: 3,438 h, cutting length (max.): 4,200 mm, cutting width (max.): 4,200 mm, Panel Dividing Saw Panhans S45, Year 2008 Read Operating Hours (Main Saw): 3,438 h Max. Cutting Length: 4,200 mm Max. Cutting Width: 4,200 mm Saw Unit Swivel Range: 0 – 45° Angle Cuts: ±45 degrees Angular Accuracy: ±0.01 mm Mitre Cuts Mitre Angles up to 46° Saw Blade Projection: 72 mm with blade vertical at 0° Saw Blade Projection: 50 mm with blade vertical at 45° Max. Stack Height: 60 mm Main Saw Blade: 350 x 4.4 x 30 mm Scoring Saw Blade: 180 x 4.55/3.5 x 30 mm Main Saw Motor: 14 kW Scoring Saw Motor: 1.5 kW Saw Unit Feed Motor: 1 kW Saw Unit Feed Rate: 0–80 m/min, stepless Saw Unit Return Speed: 100 m/min Cross Fence (Material Pusher): 1.1 kW Cross Fence Feed Rate: 0–25 m/min, stepless Fodpow N D S Ijfx Ah Espp Cross Fence Return Speed: 120 m/min Scrap Cutting Facility Brush-sealed notches in the pressure beam for complete panel separation. Clamping Grippers: 8 pieces Gripper Spacing: 65/245/395/985/1605/2845 mm Fully Automatic Side Pressure Device, stepless 50–100 mm Sensor Cutting: Optical Device for Automatic Workpiece Measurement with variable trimming cut 3 Air Cushion Tables 600×1800 mm Air Supply by Blower: 2.2 kW Operating System: WIN EX Embedded Screen Control: VGA Monitor 17"/19" Control Functions Processing Mode: Production Manual Processing Mode: Production Order Processing Mode: Production Optimization PIOS PRO Processing Mode: Production Manual All necessary programs and machine functions for processing can be entered directly in a clear menu in this mode. Processing Options Single Cut, Series Cutting, Sensor Cut, Groove, Insert Grooves, Front Rabbet, Rear Rabbet, Formatting, Cutouts, Notches Processing Mode: Production Order In this mode, cutting plans, panel cutting plans, block cutting plans, and angle cutting plans created via the PIOS PRO optimization can be processed. Groove Program Convenient production of grooves, rabbets, and insert grooves in single and series cuts using: 2 presettable groove cutting depths Formatting Device End trimming stops mounted directly on the clamping grippers for sizing of panels with overhanging surface layers. Cutout Device For making precise glass cutouts (e.g. doors), notches (e.g. ventilation slots), and for insert grooves. Cutting Height Adjustment Electro-pneumatic, stepless Positioning Accuracy of Cutting Height: ±1 mm Label Printer Operating Pressure: 6 bar Operating Voltage: 400 Volt, 50 Hz Rated Power: 20 kW Weight: approx. 4,000 kg Dimensions (L x W x H): approx. 6,500 x 7,500 mm (Subject to changes and errors in the technical data. Prior sale reserved.)

Condition: used, Year of construction: 1996, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 272 / 9-604, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, main saw diameter: 300 mm, total width: 5,700 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee. Fedpew I Er Tofx Ah Espp

Condition: used, Year of construction: 2016, Casadei AXO 300 Beamsaw (4.500mm) Technical description Working height 950mm 1 fixed airtable 2500 x 600mm 3 moveable airtables 1500 x 600mm Central fan for airtables Footpedal for start/stop of saw cyclus (ideal for large panels) Optimized pneumatically, double guide 2.200mm Linear prism guide with ballbearings for 4.500 Length of sawcarriage 4.500mm Usefull depth of saw 3.200mm Length recognition by photocell Saw height 87mm Max. sawblade diameter 350mm Diameter of the scoring unit sawblades160mm Speed of the sawcarriage 6-30 mtr./min upgrade to 0-135mtr./min Speed of the pusher 24 mtr./min (due to CE regulations) Fpjdpfx Asw E H Hboh Eep Motor power of the main saw 9,0kW (50Hz S6) Motor power of the scoringunit 1,9 kW (50Hz S6) Number of clamps 5 Dustextraction points 3 x 120mm + 1 x 150mm Dimensions 7.000 x 7.200 System PC/API PC Control 1000 (WinNCC 12 Software - Cut I optimization CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen vorbehalten! Keine Garantie auf gedruckte Daten!. Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 105,000 EURO!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase a NEW, premium panel saw—HOMAG SAW-TEC B-400 Pro Line, extended version for automatic storage integration. The SAWTEQ B-400 is a panel saw from HOMAG equipped with automatic loading for high-speed cutting. This efficient saw is designed for handling large panel volumes and delivers superior-quality finish cuts. It is renowned for reliability, precision, high power, and rapid processing speed. The unit offered here is BRAND NEW. It was bought from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our facility by the manufacturer. The HOMAG POLSKA Sp. z o.o. service team performed only the initial startup; the machine has never been used since. In the woodworking machinery industry, both Homag and this model are benchmarks—Homag is a global leader in modern, top-quality equipment. Our unit is exceptionally well-equipped, offering almost all available options. A similar saw in its standard version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and equipped with additional features, is valued at around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput thanks to automatic loading and extended saw blade reach. - High productivity with relatively low space requirements. - Designed for efficient material flow and precise logistics. Fodpfow Exk Ejx Ah Ejpp - Network-ready for digital production processes. We maintain direct contact and support from HOMAG for installation and commissioning at the buyer’s site if needed. In our view, the discount of over 45% off the new price represents an extremely competitive offer for anyone seeking a modern saw with or without future automatic storage needs—resulting in potential savings of about 90,000 EURO net (approx. 400,000 PLN net)*. The saw can be operated independently without connection to an automatic storage system. General details regarding this sales offer: - The machine is BRAND NEW, but was manufactured in 2020; therefore, no warranty or guarantee is provided. - Returns are not accepted. - The advertised price does not include VAT (23% for Polish buyers), which will be added to the invoice—please check our listed price presentation. - Single owner. * Price in EUR converted at the NBP rate—1 EUR = 4.25 PLN. Welcome to all MachineSeeker users. We are new to MACHINESEEKER. We are not a furniture manufacturer, machinery trader, or production company. We are a developer with extensive property holdings in Poland, constructing homes and apartments in Warsaw. The machines we offer are our property, acquired as settlements from tenants in the furniture industry. We know their full history and confirm their condition as described. We also maintain relations with machine manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—who can provide further support. As we do not require these machines, our pricing is extremely attractive, especially considering their almost-new state. We can assist with delivery anywhere in Poland or the EU. Prospective buyers are welcome to inspect equipment before purchase. Kind regards.

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Fpsdjw Ec Rijpfx Ah Esp Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: excellent (used), Angular sawing plant Numerical Control Power Touch - CADmatic professional (Tapio ready) No. 1 Double-deck Rollers table for pre-loading (useful mm 2200 x 5500 approx) Lifting table (mm) 4300 x 2200 Fsdpfx Ahjwydnxe Eepp 1° Rear-pusher, with No. 6 (ca.) clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 (110) Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (420) Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 130 m/min 2°Rear-pusher, with No. 8 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 (110) Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (420) Kw 18 Adjustable speed of the saw carriage (m/min) 1 - 130 m/min No. 3 Front supporting tables with Air blowing system (2 x mm 650 x 2160 + 1 x mm 800 x 2160) Total power Kw 66 Stacking system of the cut panels (No. 2 stations) OPTION: No. 1 Waste grinder

Condition: excellent (used), Roller Conveyors for the Furniture Industry – WTT Fördertechnik GmbH, Type 121 750 units of complete roller conveyor sections, each 3 m in length Total length – 2,300 linear meters Pricing: 1 unit = €80 (total length 3 m) 5 units = €300 (total length 15 m) 10 units = €500 (total length 30 m) For larger quantities, price on request. Detailed Description: Fpsdpfx Aewwmitsh Eep Roller conveyor length (L) = 3,000 mm Installation length (EL) = 500 mm Roller pitch (T) = 200 mm Conveyor height (H) = 280 mm, adjustable by +/- 25 mm Number of support feet (FA) = 1 per running meter Consisting of: 1. Side profiles, each 3,000 mm long, made from 20/80/40/3 mm profile, with a 25 mm grid, perforated to accommodate 12 mm diameter axles, powder-coated in RAL 6011 green. 2. Insertable carrying rollers Type 4.5.80.1.12.1.5.00 Steel tube – 80 x 2.0 mm wall thickness Axle – 12 mm spring axle Bearing – Steel insert with reinforced, pressed special ball bearings. Roller surface untreated steel. Installation length (EL) = 500 mm 3. Bolt-on bridge support feet in a robust welded construction from special profiles with cross brace, height-adjustable by +/- 25 mm via M16 threaded spindle and screw slot. With base plates for floor mounting and dowel hole. Powder-coated in RAL 3000 red. Weight – 2.5 kg. (Technical data subject to change and errors excepted. Interim sale reserved.)

Condition: used, Year of construction: 1999, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 30 mm, cutting height (max.): 90 mm, cutting width (max.): 4,500 mm, power: 16 kW (21.75 HP), Cutting length 4500 mm Cutting width 4300 mm Cutting height 90 mm Saw blade diameter max. 350 mm Main saw motor: 7.5 kW Fodpfx Aswu Ib Soh Eepp Scoring saw blade diameter max. 160 mm Scoring unit motor power 1.5 kW Air cushion tables: 3 pcs 1230 x 400 mm Clamping jaws 7 pcs Saw carriage height adjustment on THK guides Pressure beam with slots (pass through) Side aligner Pneumatic quick-release saw blade system Extraction diameter 4 x 120 Installation dimensions L x W 6700 x 7100 mm Weight approx. 2500 kg

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Fodpewrz Dbefx Ah Eopp Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)