Werksmaschinen

Year of construction: 1999, operating hours: 12 h, condition: new, functionality: fully functional, Equipment: Android Auto, Kozmatik textile wadding machines, Kozmatik boiler Lodpfx Agex I Nquszeta

Year of construction: 2018, operating hours: 200 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 908011821811131, The oven was purchased for annealing aluminium parts but can also be used for powder coating curing. The equipment is lightly used with less than 200 operating hours. Maximum achievable temperature: 350℃ (temperature is adjustable as required). Dimensions: 2x2x2m. The unit is equipped with a hot air collector and exhaust via a ventilation duct. Specially adapted transport trolleys are included. Ljdpfox H Rxwsx Agzjta

Year of construction: 2017, condition: like new (used), Manufacturer: Nabertherm (Germany) Model: NRA 25/06 Year of manufacture: 2017 Serial number: 211983 Condition: Used, in excellent technical condition (has been serviced) Equipment: Fume extraction hood, built-in recirculation fan Technical Specifications Working chamber dimensions (W×D×H): 225 × 500 × 225 mm Usable chamber volume: 25 liters Maximum temperature: up to +650 °C Ljdpfox Encwox Agzsta Temperature uniformity: ±5 °C within the working area External dimensions (W×D×H): 750 × 1700 × 1800 mm Control system: Controller P470, with data logging (NTLog Basic, USB) Gas system: Use of protective gas possible (inert/reactive) Vacuum: Operation under vacuum possible, final pressure down to 5 mbar Cooling: Water cooling for door (connection of a system required) Construction: Stainless steel housing, retort made of steel 1.4571, fan for uniform temperature distribution The machine can be inspected near Gießen by appointment. We will load onto your truck. The buyer is responsible for transport. Technical data, accessories, and description of the machine are non-binding.

Condition: like new (used), Used only five times, like new. Maximum temperature: Tmax = 1100 °C. Ltedox Ena Aepfx Agzoa • Internal chamber dimensions: 230 × 240 × 170 mm (W × D × H). • Chamber volume: 9 liters. • External dimensions of the furnace (with doors closed): approx. 415 × 455 × 515+240 mm (W × D × H – "+240" indicates additional space with the lift door open). • Rated power / supply: ~ 3.3 kW (or 3.0 kW depending on version), single-phase 230 V 1/N/PE (or 400 V 3/N/PE depending on configuration).

Year of construction: 1993, condition: good (used), machine/vehicle number: 86317, Offer 25335 Technical specifications: - Nominal / continuous temperature, stepless: up to 1280 °C Lodpfx Asx D U Eyjgzjta - Three-sided heating (bottom and sides) - Temperature control via NABERTHERM Controller C 19 - Drive: 400 V / 5.5 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L - Base frame: W 900 x H 900 x D 950 mm - Required space approx.: W 800 x H 600 x D 750 mm - Weight approx.: 80 kg

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Offer Plan: No. A8 28 441 Internal dimensions: width 1,500 mm – height 1,740 mm – length 2,500 mm Working temperature: 380 to 420°C. Maximum operating temperature: 450°C / air. TEMPERATURE HOMOGENEITY Homogeneous volume dimensions: width 1,300 mm – height 1,440 mm – length 2,200 mm Temperature homogeneity guaranteed: ±5°C within the homogeneous volume when it is at an average temperature of 420°C. Measurements taken in the empty chamber under stabilized thermal conditions. Slightly higher temperatures are expected near the walls. At floor level, the temperature will be approximately 80°C. A standard concrete floor is sufficient. FLOOR Constructed from aluminized steel sheet placed over 60 mm thermal insulation. This floor is equipped with embedded running rails (supplied by the customer). ACCESS DOOR TO THE INTERNAL VOLUME Number of doors: 1 Type: double-leaf, hinged on the right. DOOR SEAL Refractory fiber gasket. VENTILATION Horizontal air circulation. Number of units: 2. Type: centrifugal fan. Construction: mild steel. Individual air flow: 6,600 m³/h. Drive motor: brand A.B.B. or LEROY SOMER. HEATING Type: natural gas with combustion gas recirculation. Total power: 90 kW. Number of heating zones: 1 Burner type: modulating burner by WEISHAUPT, compliant with EN 746-2 standard. TEMPERATURE CONTROL Number of controlled zones: 1. Controller: EUROTHERM microprocessor-based PID controller. Safety: Torque break safety device. Ltjdex Dhrmjpfx Agzsa Relay output for contactor control. Cabinet equipment includes: - main switch - multiposition switches to prevent incorrect operation during start-up - transformer for control circuits - fuses for power and control circuits - contactors for the heating system - circuit breakers and contactors for motor control - panel switches - indicator lights - control and regulation instruments - CE marking will be affixed to the machine (subject to compliance with safety instructions) - A certificate of conformity or incorporation will be supplied by SAT.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,400 kg, loading space volume: 2.78 m³, inner dimension height: 1,500 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Ltedpjxurx Sofx Agzsa Maximum temperature: 190 °C Interior dimensions Internal usable volume: 2.78 m³ Internal dimensions (H x W x D): 1,500 x 1,600 x 1,100 mm Recirculation fan speed adjustable range min.: 50% Recirculation fan speed adjustable range max.: 120% Minimum exhaust air volume flow (exhaust mode): 360 m³/h Reduced exhaust air volume flow (recirculation mode): 90 m³/h Air change rate: 5 times per 300 sec. Total steam chamber volume: 4.5 m³ MACHINE DETAILS Weight: approx. 1,400 kg Filter class: H13 EQUIPMENT S!MPATI software Vacuum connection Cleanroom certification

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, inner dimension height: 230 mm, inner dimension length: 600 mm, inner dimension width: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 600 x 300 x 230 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 1,700 mm Weight: 400 kg Ltodpfsxqnzbox Agzsa

Year of construction: 2002, condition: not inspected (used), functionality: unexamined, overall weight: 150 kg, inner dimension height: 140 mm, inner dimension length: 320 mm, inner dimension width: 250 mm, temperature: 1,100 °C, machine/vehicle number: 168493, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Submitting a bid obligates timely collection between 26.01.2026 and 29.01.2026! Lsdpfx Agjxqny Dezeta TECHNICAL DETAILS Max. temperature: 1,100 °C Internal dimensions: 320 x 250 x 140 mm MACHINE DETAILS Electrical data Operating voltage: 230 V Frequency: 50 / 60 Hz Rated current: 13 A Connected load: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 600 x 550 x 1,500 mm Weight: 150 kg

Condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, inner dimension height: 300 mm, inner dimension length: 440 mm, temperature: 650 °C, machine/vehicle number: 0001614, No minimum price – guaranteed sale to the highest bidder! Lodpfx Agsxqfwmjzeta The machine is being auctioned due to business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Rated temperature: 650 °C Internal dimensions: 440 x 300 x 300 mm MACHINE DETAILS Electrical Specifications Operating voltage: 380 V Frequency: 50 Hz Rated current: 7 A Dimensions & Weight Dimensions (L x W x H): 1,000 x 700 x 1,600 mm Weight: 300 kg

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Lsdexpf I Nepfx Agzeta Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Condition: defective spare-parts repository (used), Year of construction: 2009, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: 870420, Electrically heated recirculation oven. Control system is defective. Repair offer is available. The control system needs to be repaired and the seals need to be replaced. Dimensions: width 2700 x length 2500 x height 1200 mm. Usable volume: 7.4 m3. Steam chamber: 10 m3. Heating capacity: 180 kW. Maximum temperature: 600°C. Max. air volume flow: 5000 m3/h. The oven also features a car bottom for loading/unloading and a wide, split door. The oven has seen little use. It is currently dismantled and in storage. Lsdpfoxnx E Sex Agzeta

Condition: new, functionality: fully functional, Year of construction: 2025, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside Ltsdpsxna U Usfx Agzsa - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: used, Year of construction: 1997, For sale is the enamel stove shown in the pictures. If you have any questions, we are happy to assist you. Ltedpfx Aoxlq Elsgzea

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, industrial oven VMD GRYGOV TKS 300°C /ct2252b/ 1.95 m x 2.4 m x 1.5 m internal dimensions air-mixed oven drying cabinet manufacturer: HV VMD GRYGOV TKS 080 EKZVO Year of manufacture 2004 Operating dimensions mm 1950 width x 2400 height x 1520 depth Ht Industry Programmable PID temperature controller volume: 7.2 m3 Temperature max. 300 ° C Air circulation: up to 2x 6120m3/h 2pcs heat-resistant radial fans 2x 1.5kw VNG315-4-1.5 Power supply Electric Nominal power 83 kW Voltage 380 V Frequency 50-60 Hz external dimensions: length:3400mm Ltodpfjxhnn Nex Agzea width: 2560+300mm height:3100mm door type: 2 door -Ex lock Warming up time 15-30 minutes (180° C) Homogenity

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: Ltedpfxoxfcdyo Agzsa - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Used rotary hearth furnace with mandrel hardening press Make: Aichelin and mandrel hardening press MAP DHM 1-350 S / year of manufacture: 2004 Ltedpfew Rrxfox Agzoa Type: Rotary hearth furnace Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS

Year of construction: 1992, condition: used, max. temperature 1100 Grad size of opening ca. 250 x 120 mm depth of chamber ca. 290 / 310 mm Ltjdpjw Rrf Sofx Agzea heating capacity 2,7 kW control "Thermocomputer TC 5040"

Year of construction: 2004, condition: excellent (used), functionality: fully functional, industrial oven VMD GRYGOV TKS 300°C 1.95 m x 2.4 m x 1.5 m internal dimensions air-mixed oven drying cabinet manufacturer: HV VMD GRYGOV TKS 080 EKZVO Year of manufacture 2004 Operating dimensions mm 1950 width x 2400 height x 1520 depth Ht Industry Programmable PID temperature controller volume: 7.2 m3 Temperature max. 300 ° C Air circulation: up to 2x 6120m3/h 2pcs heat-resistant radial fans 2x 1.5kw VNG315-4-1.5 Lodow Rb Snspfx Agzeta Power supply Electric Nominal power 83 kW Voltage 380 V Frequency 50-60 Hz external dimensions: length:3400mm width: 2560+300mm height:3100mm door type: 2 door -Ex lock Warming up time 15-30 minutes (180° C) Homogenity

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, input frequency: 50 Hz, usable tank capacity: 2,100 l, temperature: 100 °C, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Ltedpfxjw H I A Ts Agzja Oven data Usable volume: 2.1 m³ Drying temperature: 100 °C MACHINE DETAILS Electrical data Voltage: 400 / 230 V, 50 Hz

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,180 mm, total height: 3,060 mm, total width: 1,460 mm, temperature: 200 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 1,700 mm, inner dimension width: 2,200 mm, inner dimension height: 1,200 mm, overall weight: 1,040 kg, FOR SALE: New industrial Powder Coating Oven by ROMER – Model SL High-efficiency electric curing oven from ROMER, Europe’s leading powder coating equipment manufacturer. 🔹 Internal dimensions: 1700 × 2200 × 1200 mm 🔹 Max. temperature: 200°C 🔹 Heating power: 30 kW Lodpow Hq Ufefx Agzeta 🔹 Air circulation: Forced, vertical flow 🔹 Smart control: Touchscreen, PLC + HMI, SCADA-ready 🔹 Cycle time: 40 min (fully loaded to 180°C) 🔹 Includes: iCure software, MTS & ThPID systems, USB data logger 🔹 Delivery time: in stock 🔹 External dimensions: 2180 × 3060 × 1460 mm 🔹 Power supply: 400V

Year of construction: 2002, condition: good (used), functionality: fully functional, Temperature max: 700° Celcius Opening LxH: 1.500 x 30 mm Lsdpfx Agjwi Ry Hezjta Country of origin: The Netherlands Electric power: 14 kW Machine LxWxH: 2.000 x 1.000 x 1.700 mm Machine weight: 1500 kg

Condition: good (used), Year of construction: 2002, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Lodpfx Aswg Hlaogzsta and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, fuel type: electric, tank capacity: 1,000 l, continuous power: 14 kW (19.03 HP), total length: 1,000 mm, total width: 1,000 mm, total height: 1,000 mm, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request. Fast delivery: Only 4 weeks after receipt of payment! ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ⭐ Powder furnace with electric heating - MATOVENB-101010 ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1000 mm H ✔️ External dimensions: 1500 mm L * 1300 mm W * 1900 mm H ✔️ Electric heating output: 12 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan output: 0.75 [kW/h] ✔️ Total 14 kW/h +- 10% ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function are adjustable ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 🔥 MATOVENB-101010 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-101010 is your reliable solution for professional drying and curing processes up to 230°C! 🌡️ 🚚 Maximum loading flexibility • Use with a mobile workpiece trolley possible • Optionally with a loading rack system for small batches ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process ♨️ Ramp heating mode (optional) Precisely control the temperature profile and holding times, e.g. E.g.: Ledpfxswfpp Ej Agzsta • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events 🛡️ Safety is our priority 🟢 Safety sensor to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume extraction via automatic venting ⚡ Customized energy and heating system 🔌 Selectable heating systems: Gas, Diesel, Electric, or Hybrid (two combined heating modes) (optional) 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! Request now – Make your business fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - MATOVENB-101610 ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1600 mm H ✔️ Electric heating capacity: 18 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan capacity: 0.75 [kW/h] ✔️ Total 45 kW/h +- 10% ✔️ Digital heat control: Continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.2 mm galvanized steel Exterior: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function Ltodpfxowd Nwaj Agzea ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) 🔥 MATOVENB-101610 – Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastics processing, or other thermal processes – the MATOVENB-101610 is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️