Used heavy-duty shelves for sale (197)

Condition: used, dimensions 1000 x 1100 mm Fpodpfx Ahevpr Tie Uop Ideal as a floor for heavy duty shelving Pressed grating galvanized DIN EN ISO1461 Support bar: 30x2mm cross bar: 9x1,6mm Mesh: 31x31mm Edge bar: 30x3mm

Condition: used, Beams 3,100 mm, 200 pieces or alternatively Beams 2,800 mm, 200 pieces Fedouc T Enopfx Ah Ujpp Uprights 1,050 mm x approx. H 8.5–10 m, 15 pieces The number of beams can be increased for an extra charge. Loading facility available.

Condition: new, High quality grating supports with high load capacities, low priced alternative for grating - new -. Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (for a 2,70m truss then 3 supports are needed = 2.655mm) 1335mm Frame depths: Fpsdpfxjiuvxbs Ah Usp 1,05m 1,10 1,20m Other depths on request! Uniformly distributed load: between 250 and 1.500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Grid size: 50 x 100 or 25x100mm Please also indicate which type of beam (truss type) you have when making an inquiry! So whether box profile (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of the rack beams Can be tested for permissible deflection and structural failure Wide range of standard sizes and load capacities MantaMESH is our market leading wire mesh shelving solution. MantaMESH delivers certainty with more than 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration - we will be happy to create a configuration for your application!!! Depth 1102mm width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the support beams Front: fold 30mm outwards Rear: Fold outside 30mm downwards Item weight 9.43kg

Condition: good (used), Selling our beams or purchasing frames for them: SSI PR350 2700*100 IPE mm, 3000 kg/level, approx. 682 pcs Stow 2700*120 mm, 2400 kg/level, approx. 292 pcs – €15/unit Feralco 2740*100 mm, 2400 kg/level, approx. 112 pcs – €10/unit Metalsystem 2700*100 mm, 2400 kg/level, approx. 210 pcs – €10/unit Meta 2700*100 mm, 2400 kg/level, approx. 544 pcs – €10/unit Jungheinrich Esmena 2700*120 mm, 3000 kg/level, approx. 90 pcs Selling our frames or purchasing beams for them: Promag: 5500/4500*1050 mm, approx. 45-15 pcs Dexion SL: 5700*1100 mm, approx. 29 pcs Jungheinrich MPB uprights: 9000*100 mm, approx. 22 pcs If you require racking or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking and accessories and are happy to support you with your planning. Additional accessories available, such as: Frame-, corner-, and impact protection, pallet stop beams, chipboards, wire mesh decks, mesh rear panels, depth support bars. Shipping: Please enquire about freight costs by providing your postcode, location, and the desired quantity. Additional services offered: Fpsdeq Tpk Ispfx Ah Usp Planning, racking assembly/disassembly, purchasing and selling Subject to changes and errors in technical data, details and prices, as well as prior sale!

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Fjdpomhhy Nefx Ah Uepp - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), Year of construction: 2019, 2.87 meter Jungheinrich pallet racking with 2 levels Jungheinrich pallet racking base bay with a total length of 2870 mm. The bay has two levels (incl. floor space) with two cross beams (2700 mm). The bay can store 3 Euro pallets next to each other and 6 pallets (incl. floor space) on top of each other The bay offers space for 6 Euro pallets Manufacturer: Jungheinrich Type: MPM Overall length: 2870 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear bay width: 2700 mm Number of storage levels: 2 (incl. floor space) Number of bays: 1 Max. shelf load: 3000 kg Max. bay load: 7100 kg Pallet spaces: 6 Racking according to standard: DIN EN 15512 Fjdpfxewyc S Ae Ah Uepp Uprights surface: powder-coated Uprights RAL color: RAL 5010 gentian blue Uprights type: B'12 Cross beam RAL color: RAL 1007 daffodil yellow Cross beams surface: powder-coated Scope of delivery: 02 x Jungheinrich pallet racking uprights blue 3000 x 1100 mm 02 x Jungheinrich pallet racking cross beams yellow 2700 x 140 x 50 mm 04 x locking pins Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen Fpsdpfxoq S Rr Ns Ah Uep WE OFFER STOW pallet racking 3 bays 27 pallet spaces incl. floor spaces 4 frames: 2,750 mm x 1,100 mm x 85 mm 12 cross beams: 2,800 mm x 100 mm x 50 mm 8 fixed anchors 24 securing pins This is a used item. PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will be happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We constantly offer you interesting second-hand offers from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2012, Pallet sliding rack for Euro pallets etc., SSI Schäfer, 1,000kg / pallet, 2,552 Euro pallet spaces - used -: Price ex location: €79,500 (net), plus dismantling etc.! Manufacturer: SSI Schäfer Type: PR600 / mobile longitudinal beam rack A6/A7 Year of manufacture: 2012 Manufacturer: SSI Schäfer Type: mobile rack system PR 600 2 wall racks 4 mobile racks with double racks Cart length = 39,432mm Cart width = 2,700 mm PAL spaces = 2,552 Euro pallets Data for mobile racks: Rack height (top shelf): 7,094mm Frame height (inside): 7,100 mm Frame height (outside): 7,600 mm Rack depth: 1,050mm Number of storage levels: 7 Lower shelf height: 2,444mm Support profile: P 15 Shelf loads: Level 1: Clear bay width: 2,700mm, profile IPE 100, shelf load 3,000kg Level 2-7 Clear bay width: 2,700mm, profile CE 110, shelf load 3,000kg Max. pallet weight: 1,000kg Max. usable bay load: 21,000kg Number of trolleys: 4 Max. load per trolley: 540,000kg 3x400 / 240 V AC, 28A, Motor power per trolley: 4x 0.75kW = 3kW Control voltage: 24V Fixed shelf: Type: PR600 / longitudinal beam shelf A1 Year of construction: 2012 Shelf height (top shelf): 7,042mm Shelf depth: 1,050mm Number of storage levels: 3 Lower shelf height: 2,942mm Support profile: P 15 Shelf loads: Fpjdpfx Ajvnzgcoh Uop Clear Field width: 2,700mm, profile CE 110, shelf load 3,000kg Clear field width: 3,600mm, profile CE 160, shelf load 4,000kg Max. pallet weight: 1,000kg Max. usable field load: 9,000 / 12,000kg Condition: good - very good Available: from the end of March 2025 Location: 78713 Schramberg-Waldmössingen

Condition: good (used), load capacity: 650 kg, Dexion pull out unit for pallet racking system. Load capacity: 650kg. It can be pulled out up to 70%. There are 2 versions: one can be mounted on a pallet, the other one can be laid on the ground. Fpedpfx Aheukq R Ss Uop Size: 860*1270*130mm

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Fjdpfx Aomhh Dtjh Uopp Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2019, 5.60 meter Jungheinrich pallet racking with 2 levels Jungheinrich pallet racking with a total length of 5600 mm, consisting of one base and one add-on bay (2700 mm each). Each bay has two levels (incl. floor space) with two cross beams (2700 mm). Each bay can store 3 Euro pallets next to each other and 6 pallets (incl. floor space) on top of each other One bay offers space for 6 Euro pallets Manufacturer: Jungheinrich Type: MPB Total length: 5600 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear bay width: 2700 mm Number of storage levels: 2 (incl. floor space) Number of bays: 2 max. shelf load: 3000 kg Max. bay load: 7100 kg Pallet spaces: 12 Scope of delivery: 03 x Jungheinrich pallet racking uprights blue 3000 x 1100 mm 04 x Jungheinrich pallet racking cross beams yellow 2700 x 140 x 50 mm 08 x Locking pins Fpsdpfx Ajwya Hksh Uop Further items - new and used - can be found in our store! International shipping costs on request!

Condition: used, Four wins - The building blocks of success from DLK - Lagertechnik | Levelmaker® | Logistik | Lösungen WE OFFER Stow pallet rack 1 bay 9 pallet spaces incl. floor spaces 2 frames: 2,750 mm x 1,100 mm x 85 mm 4 cross beams: 2,800 mm x 100 mm x 50 mm 4 fixed anchors 8 securing pins This is a used item. Fsdpfxsq Rb Rue Ah Ujpp PROJECTION Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will be happy to help you with the transportation and assembly of your goods. TERMS OF PAYMENT Terms of payment must be agreed in the event of an order. The price is understood to be the unit price/net price or as stated in the description text (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, warehouse platforms, textile warehouses and machines for trade, industry and crafts. We are constantly offering you interesting used products from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us.

Condition: good (used), approx. 250x stanchion racks / storage racks / stacking racks, approx. 1.98 x 1.40 x 2.45m - second-hand - : Price per piece ex location: only 155.-€ (net)! Manufacturer: unknown Type: unknown Fjdpfx Aju Himreh Uspp Year of construction: unknown Load capacity: unknown Interior dimensions: 180 x 139 x 225 External dimensions: 198 x 140 x 245 Own weight: approx. 150 kg Load capacity: approx. 500 kg (no guarantee) Load capacity: approx. 1000 kg (no guarantee) Stackability: 3-fold Base material: Plastic Each unit consists of: - 2 removable side panels - 3-piece plastic base - Base profile - Stiffening strut (red rods 3x) Condition: good Available: immediately Location: 72379 Hechingen

Condition: good (used), Frame: 7000*1050 mm 105 EUR/piece (53 pieces) Beams: 1800*100*50 mm 2400 kg/level 10 EUR/piece (315 pieces) Fedpfouf Snajx Ah Ujpp If you need shelving or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories and are happy to assist you with your planning. Additional accessories available, such as: Frames, corner and collision protection, push-through guards, chipboards, mesh shelves, back mesh panels, depth supports. Shipping: Please enquire about shipping costs by providing your postal code, city, and the desired item quantity. Other services offered: Planning, rack assembly/disassembly, purchasing/sales Subject to changes and errors in technical data, information and prices, as well as prior sale!

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Fpjdpfx Aefdkb Tsh Uep - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: good (used), Year of construction: 2019, 11 meter Jungheinrich pallet racking with 2 levels Jungheinrich pallet racking with a total length of 11000 mm, consisting of a base bay and three add-on bays (2700 mm each). Each bay has two levels (incl. floor space) with two cross beams (2700 mm). Each bay can store 3 Euro pallets next to each other and 6 pallets (incl. floor space) on top of each other One bay offers space for 6 Euro pallets Manufacturer: Jungheinrich Type: MPB Total length: approx. 11000 mm Shelf height: 3000 mm Shelf depth: 1100 mm Clear bay width: 2700 mm Number of storage levels: 2 (incl. floor space) Number of bays: 4 Max. shelf load: 3000 kg Fodpswyaz Iofx Ah Uepp Max. bay load: 7100 kg Pallet spaces: 24 Scope of delivery: 05 x Jungheinrich pallet racking uprights blue 3000 x 1100 mm 08 x Jungheinrich pallet racking cross beams yellow 2700 x 140 x 50 mm 16 x locking pins Further items - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), 73 pieces of 7000*1000 mm frames 512 pieces of 3600*100 mm beams Fpsdsu Ibnwjpfx Ah Usp Storage capacity: 1,280 pallet spaces Load capacity: 400 kg/pallet

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Fpedemhh Dhjpfx Ah Uep Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Armes pallet racking system for storing documents. Frame: 9500*1720 mm Beams: 1540*70 mm 1910*70 mm 2270*70 mm Fpjdpfewrzhmex Ah Usp Mesh: 730*1720 mm 930*1720 mm 1100*1720 mm

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth Fpodpfsguk Dkjx Ah Uop - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Fpodsmhh Anopfx Ah Ujp Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. Fpedpfx Ajguk Dvsh Uop We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Fodsmhh Dzjpfx Ah Uspp When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Fpjdpfx Ajguk A Hjh Usp - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Fpjdpsmhhypofx Ah Uep - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.