Condition: used, This listing is for a Watson Marlow 604S Peristaltic Pump The unit is in full working condition and is ready for immediate release. The Watson‑Marlow 604S is a laboratory/industrial peristaltic (tube) pump, designed for dosing, metering, and fluid transfer tasks where the fluid must remain isolated from moving parts. It’s part of the “600” series of Watson‑Marlow pumps and is intended for relatively high flow rates in a controlled environment (e.g. labs, pilot plant, certain chemical or processing setups). Because it’s a peristaltic pump, the fluid only contacts the inner wall of a flexible tube, which makes it suitable for shear‑sensitive, corrosive or potentially particulated fluids, without contaminating the pump internals Strengths Clean & Isolated Flow: Because only the inner surface of the tubing contacts the fluid, there is no risk of cross‑contamination or fluid leaking into mechanical parts. Fsdpfexv Ad Uex Ah Ujpp Good Flow Capacity: With a relatively high maximum flow (≈ 11 L/min), it can handle moderate bulk transfer in addition to dosing. Robust Housing: The IP55 rating makes it resistant to dust ingress and water spray, which is beneficial in industrial or lab environments with splashes. Variable speed control: The broad control range allows fine tuning of flow. Relative simplicity of maintenance: Replacing tubing is straightforward compared to more complicated pump mechanisms (valves, seals, diaphragms, etc.).

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Fpjdpfjxtb Efjx Ah Uep Noise: At a wavelength:

Condition: used, Item: D-5730-Dickow Pump Wilhelm Dickow, Type NCL 50/165 Centrifugal pump / explosion-proof centrifugal pump with shaft seal Fedpsiiyrksfx Ah Uopp 7,5 kW, 2890 r/min

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Fodpfxoxrnuwo Ah Uopp

Condition: excellent (used), Couloscope v18, Couloscope CMS2 STEP Fsdpfx Asvzb Umjh Uspp

Condition: used, This listing is for a Thermo Scientific Multi Blok heater 2050 1CE The unit is in full working condition and is ready for immediate release. The Multi Blok Heater is a laboratory heating device used to heat samples in tubes, vials, PCR plates, etc., by conduction via a metal block, rather than using a water bath. “2050” is the model number, while “1CE” (or “1CEQ”) denotes a single‑block, CE‑certified version suited for use with one interchangeable modular block. Fpodpfjxv Aduox Ah Usp The device is compact and bench‑top, intended for fixed temperature incubations, sample pre‑heating, enzyme reactions, and other lab protocols where stable heat is required.

Year of construction: 2016, condition: excellent (used), I am selling a Leica RM2255 in very good condition, after inspection. Fsdpfsvygd Rox Ah Uopp

Condition: used, This listing is for one of 2 Mettler Toledo Seven Excellence Multi parameter Metres Fpsdpfx Ahexv Adbe Uop The unit is in full working condition and is ready for immediate use The METTLER TOLEDO SevenExcellence series includes a line of advanced benchtop meters designed for high-precision electrochemical measurements. These meters are ideal for applications in pharmaceuticals, food and beverage quality control, and environmental testing. Key Features Across the Series Measurement Capabilities: Models support pH, conductivity, resistivity, redox/ORP, TDS, salinity, ISFET, ion selective electrodes (ISE), and dissolved oxygen (DO). User Interface & Workflow Optimization: Large touchscreen display for intuitive, efficient navigation. Plain language menu structure eliminates confusion during setup. One-click operation launches one of 17 predefined or 60 customizable methods, boosting throughput. Choose from uFocus™ view, which displays only critical data, or standard view for detailed information including setup and measurements. Data Management: Export results to printers, Excel, or LIMS. Compatible with LabX software for 21 CFR Part 11 compliance and advanced data control. Time and date stamps from a radio-controlled clock ensure compliance with GLP standards. Security & Compliance: User management settings and PIN protection prevent unauthorized method changes. Integrated Sensor Management (ISM®) pH electrodes are automatically recognized and retain their own calibration data—ensuring accuracy even when electrodes are swapped. Modular and Ergonomic Design: Electrode arm enables easy one-handed operation and precise vertical movement to reduce spills and save time. Modular construction allows for easy upgrades and expansion as your lab's needs change. Connectivity options include USB, Ethernet, and RS-232 ports for integration with PCs and peripheral devices.

Condition: used, This listing is for a Stuart Scientific SB301 Magnetic Stirrer The unit is in full working condition and is ready for immediate release. Overview & Intended Use The SB301 is a robust, heavy‑duty magnetic stirring device designed for laboratory applications where relatively large volumes of liquid (up to around 30 L of water-equivalent) need to be stirred. Fjdpfxsxv Ac Do Ah Uopp It is used in chemistry, biology, environmental labs, or anywhere you need continuous stirring without introducing mechanical agitation (i.e. no overhead stirrer, no impeller). It emphasizes stable speed control, durability, and strong magnetic coupling (i.e. strong magnetic fields to drive the stir bar reliably even under load

Condition: used, This listing is for a Bibby Scientific HT2 Halogen Hotplate Stirrer The unit is in full working condition and is ready for immediate release Bibby Scientific HT2 Halogen Hot Plate Stirrer Bibby HT2 Bibby Sterlin HT2 HT2 120 Volt a high heat glass top halogen hot plate stirrer Maximum temperature 450C Stirrer speed range 0 to 1100 rpm Heater Twin infra red halogen lamps Fodpfxoxv Acwo Ah Ujpp Heater area (dia) 140 mm Dimensions lxwxh 300 x 300 x 100 mm

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once Fpodpjxv Ackjfx Ah Uep 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg It supports simultaneous punching and binding thanks to its combined design

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior Fsdpfx Ahsxv Ab He Uepp The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Fpsdpfx Ahexv Abts Uop Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: used, This listing is for a Sartorius Combics 3 Balance The unit is in full working condition and is ready for immediate release The Combics 3 is described as a weighing terminal / indicator rather than the weighing pan or scale itself. It is designed to connect to one or multiple load‑cells / scales and manage/control them. Housing: It uses a stainless‑steel enclosure rated IP69K, meaning it is highly resistant to dust and powerful water jets — suitable for very demanding industrial or hygienic environments (food, pharma, chemical production). Display & Interface: Has a back‑lit graphical LCD display for clarity in industrial conditions. Connectivity/Interfaces: Comes with standard communication ports (for example RS‑232) and various optional ones such as RS‑485, Profibus-DP, Ethernet TCP/IP, Modbus TCP, and analog/digital I/O for integration into automated systems. Multi‑scale support: Capable of managing up to three scales simultaneously. This allows e.g. combining inputs or workflows from multiple platforms. Fsdpfxsxv Abge Ah Uepp Applications: The terminal supports a number of weighing‑related functions: piece counting, recipe/formulation support (multi‑component weighing), target weight monitoring, classification, dynamic weighing (items in motion), percentage weighing, etc. Traceability & certification: Optional alibi memory (for trace logging of weighing data) is available, supporting compliance requirements (GMP, ISO, ATEX in some cases) for industrial/regulated environments.

Condition: used, This listing is for a SAS Super80 Air Sampler The unit is in full working condition and is ready for immediate release. The SAS Super series (by SAS / Bioscience International, also referenced under other distributors) are impaction‑type microbial air samplers. They draw a known volume of air through a sampling head so that airborne microorganisms are impacted onto an agar contact plate (or Petri dish) for subsequent incubation and colony counting. These instruments are commonly used in cleanrooms, pharmaceutical manufacturing, hospitals, and other controlled environments to assess airborne microbial contamination. Good combination of high airflow + relatively compact unit; allows efficient sampling of large volumes in minimal time. Fpedoxv Abaepfx Ah Ujp Wide usage and long track record (models from this family have been used since the late 1970s/80s) which implies reliability and a mature support ecosystem. Flexible head options (aluminium, stainless steel, resin), choice of plate types (contact plates or standard Petri dishes) in some variants. Strong traceability / data capture features, which are important for regulated environment

Condition: used, This listing is for a Schott Halogen HT2 Stirrer Hotplate The unit is in full working condition and is ready for immediate release. Key Features & Specifications While exact values for the “HT2” designation are not widely published, the listed SLR Halogen model gives a very good indication of typical performance: Heating surface: glass/ceramic top plate (≈16 cm diameter in one listing). Maximum plate surface temperature: up to ~500 °C. Fedoxv Aa Nopfx Ah Uopp Stirring range: approximately 10 – 1,100 rpm (in one listing). Compact dimensions: one listing shows ~24 × 37 × 9 cm (W×D×H). k Suitable for use with a retort rod.

Condition: used, This listing is for a Sartorius F1 10KG Cylindrical Calibration Weight The unit is in full working condition and is ready for immediate release. Fsdpfoxv Aavsx Ah Uspp This is a high‑precision reference/test weight manufactured by Sartorius, made of stainless steel, with a nominal mass of 10 kg. It’s used primarily for calibrating, verifying and testing weighing instruments such as balances and scales. For example, the “Cylindrical Calibration Weight” line covers nominal masses from 1 g up to 10 000 g (10 kg) and this item falls at the top end of that range for the 10 kg value. Because it’s manufactured to a high class (F1 / OIML F1) and often comes with traceable certification, it serves as a “standard” weight for checking or adjusting high‑capacity lab or industrial balance

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Fpjdpfx Ahjxv Aaie Uep Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Year of construction: 1993, condition: used, This listing is for a Abbott 3531 Centrifuge Listing: Abbott 3531 Centrifuge Fpsdpfx Asxvz U Eoh Usp Quantity: 1.0

Condition: used, This listing is for a Sartorius MSA4202S 8.2g-2500g Precision Balance The unit is in full working condition and is ready for immediate release. Modular design (part of the Cubis® series) – the system is built of a weighing module + display/control unit + interface modules, designed for flexible configuration. High-resolution colour TFT display + touchscreen interface, offering an intuitive user interface. Fedpfx Asxuu Hloh Uopp Multiple interfaces standard: USB, Ethernet, RS-232, SD card reader for data transfer and traceability. Functions typically include: weighing, density determination, averaging, formulation, percentage-weighing, check-weighing, totalising. Assisted (and optionally motorised) levelling; the system detects inclination and assists the user in levelling the instrument. Automatic internal calibration (isoCAL) for improved stability and lower drift. GLP/GMP/traceability ready: audit trail functions, user profiles, etc

Condition: used, This listing is for a Sartorius MSA124S Balance The unit is in full working condition and is ready for immediate release. The MSA124S is part of the Sartorius “Cubis” series of analytical balances, which are modular, high-performance instruments designed for milligram-level weighing. Very fine resolution / readability: it supports a readability of 0.1 mg (0.0001 g) in many configurations. Weighing capacity: around 120 g (for the “124” model) in the typical configuration. Excellent repeatability and linearity: e.g., repeatability ≤ ±0.1 mg, linearity ≤ ±0.2 mg. High-end interface and connectivity: E.g., Ethernet, USB, RS-232, optional Bluetooth; also SD-card reader for data transfer. Advanced ergonomic features: tiltable and removable display/control unit, motorised draft shield (in certain variants) to minimise environmental influences. Compliant with GLP/GMP/laboratory traceability requirements: audit trails, user profiles, leveling assistance etc in higher-end configurations Because of its high precision and fine resolution, the MSA124S is best suited for: Analytical laboratories performing gravimetric measurements, chemical/ pharmaceutical labs, material science labs. Applications where small sample masses must be weighed accurately (e.g., formulations, dosing, microparticles). Environments requiring audit-trail/logging, connectivity, and data export (e.g., regulated labs). Use cases where drift/offset must be minimised and environmental effects (drafts, vibrations, static) must be managed. Fjdpfx Ahjxuqmnj Uepp

Condition: used, This listing is for the Cole Palmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Fedpsxuqh Ejfx Ah Uspp Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Condition: used, This listing is for a Grant Bio McFarland DEN-1 Densitometer The unit is in full working condition and is ready for immediate release. The DEN-1 is a compact benchtop turbidity/densitometer instrument manufactured by Grant Bio (part of Grant Instruments). It is designed primarily for life-science and microbiology applications — for example, measuring the turbidity of cell suspensions (bacterial, yeast) or other particulate suspensions. Typical uses include: Determining cell concentration in fermentation or culture processes Fedpfxoxup Nhs Ah Uspp Assessing microbial susceptibility (via turbidity changes) Identifying microorganisms in test systems Measuring optical density / turbidity at a fixed wavelength for dyes or suspensions

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. Fpjdpfxsxukkye Ah Ujp The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Fsdpfxsxukh Ej Ah Uopp Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes