Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Fjdpfxjxukkyo Ah Ujpp Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Fpjdpfx Ahoxqnvrj Uep Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, Used X-ray system type Bochumer Röntgenwerk - floor-ceiling stand - Picker control console - Q 60 developing machine. Not dismantled - for 2,500 euros. Fsdpfxsxvrnvj Ah Uspp

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 7007811, total width: 800 mm, total length: 900 mm, total height: 1,670 mm, power: 4.5 kW (6.12 HP), Offered for sale is an as-new ultrasonic system from the manufacturer MS-Ultrasonic. The system was only used for development purposes and therefore has low operating hours. The system was purchased in 2022 for EUR 53,932. Fsdpfx Ahow Imkwo Uopp If you have any questions, feel free to contact us.

Condition: ready for operation (used), A Büchi laboratory spray dryer is available. Evaporation capacity: 1l/h, heating power: 2300W, max. inlet temperature: 220°C, air flow rate: 35m³/h, spray gas flow rate: 200l-800l/h, pressure: 5bar-8bar. Machine dimensions X/Y/Z: approx. 650mm/700mm/1100mm, weight: approx. 50kg. Documentation available. An on-site inspection is possible. Fpedpfx Ahjxvruce Ujp

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Fodpfx Aju Udp Ijh Uepp

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities Fpedpfx Asxukh Ejh Ujp The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: excellent (used), Hopper milling machine for orthopaedic technology, prosthetics manufacturing Suitable for precise and easy production (grinding, milling) of prostheses or other orthopaedic work. Spindle speed: 2880 rpm Motor power: 1.5 kW Adjustable new extraction hopper, new extraction hose Good technical condition, the machine has been partially refurbished and newly painted. Fodpfx Aexu Nayeh Ujpp

Condition: good (used), Year of construction: 2020, Fully automatic assembly line for MA disposable face masks Manufacturer: PIA Automation Model: PIA-M200101 Year of manufacture: 2020 Mask type - 1-ply non-woven masks - 3-ply non-woven masks Mask size: 17.5 × 9.5 cm (adult) Output: 80 pieces/min Ultrasonic frequency: 20 KHz Machine dimensions: 6000 x 5000 x 2800 mm Voltage: 400V – 50 Hz Compressed air: 5–7 bar Power supply: 12 kW Cycle time: 80 pieces/min Fpedpfou T Rydjx Ah Ujp High output: 100,000 pieces per day Easy and safe operation Automatic alarm system Integrated intelligent control system One-man operation The manufacturing process includes the feeding of filter material, pleating and pressing, feeding of nose bridge clips, mask forming, mask cutting, ultrasonic welding of earloops, stacking for packaging, and other auxiliary processes. Especially suitable for the production of three-layer disposable masks. Additionally, a UV unit has been installed to increase the hygiene standard, as well as a stacking device for preparation for subsequent packaging.

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace Fpedexurpwjpfx Ah Usp 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Very well maintained blood analyzer type Reflotron IV of the world brand Roche, wave range: 567-951 nm. The device has a printer interface and connection for keyboard, and is supplied with the accessories shown. All devices were manufactured in Germany and used very little by federal companies, condition is optically and technically flawless. The following measurements can be carried out with the Reflotron system: - Glucose - cholesterol - triglycerides - HDL cholesterol - GPT (ALAT) - GOT (ASAT) - GGT (gamma-GT) - creatinine - urea - uric acid - Potassium - Alkaline phosphatase - Hemoglobin - Bilirubin - Creatine kinase (CK) - Amylase - Pancreatic amylase Scope of delivery: - Reflotron IV blood analyzer - Rack for accessories - Pipette for Reglotron IV - Applicator - Power supply unit - Manual German, English Fpedpfjq Stvusx Ah Uop All components are in very good optical and technical condition and can be used immediately. Some discoloration on the housing is due to storage and does not limit the usability of the system in any way - see pictures. The system shown is for illustrative purposes only, all systems offered are in comparable condition. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the opportunity to purchase the device "on behalf of a customer", a direct commercial sale to private individuals expressly does not take place! For professional use, the tests prescribed by the respective national law, such as STK / MTK, must be carried out. The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. If you have any queries, please contact us directly using the contact details provided.

Condition: used, Year of construction: 2001, JOUAN SA Centrifuge KR25i Fjdpsw Hcxcsfx Ah Uepp - one accessory included in the machine, see photo - shipping possible at extra cost

Condition: used, This listing is for the Sartorius Tare ENTRIS2201-1S Balance + Tare Printer The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2201‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Fpjdpfx Aexui S Ajh Uop Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: ready for operation (used), PRODUCT INFORMATION Total weight (standard jib, without accessories): 64.5 kg (142 lb) Lifting capacity (SWL): Regular jib: 227 kg (500 lb); Extended jib: 130 kg (287 lb) Battery pack weight: 5.0 kg (11 lb) Turning diameter: 1222 mm (48 in) Minimum door requirement: Standard Base (KMCS…) & Low Height Base (KMCL…): 717 mm (28.25 in); Extra Low Height Base (KMCEL…): 770 mm (30 3/8 in) Operating forces of controls: 2.5–3 N ELECTRICAL Degree of protection: IPx7 (Hand control), IP24 (MAXI MOVE) Internally powered: 24 Vdc Battery type: Rechargeable (Sealed Lead Acid) Battery capacity: 24 Vdc, 4.0 Ah to 5.5 Ah Battery charger input (part #NDA8200): 100 to 240 Vac / 50 to 60 Hz Up and down current limiting: 12 ± 1 Amp Duty cycle: 15% (max. 2 min continuous use) Sound power level (up): 61.9 dBA Sound power level (down): 61.7 dBA Medical equipment classification: Type BF protection (IEC 60601-1 compliant) COMPLIANCE / WARNINGS Compliance: IEC 60601-1-2 (Electromagnetic Compatibility), ISO 10535 (except with stretcher) RF communication warning: Keep portable RF equipment at least 30 cm away from device DIGITAL SCALE SPECIFICATIONS Weight range: 227 kg (500 lb) Display resolution and type: 0.1 kg (0.2 lb), liquid crystal display Accuracy (in service): • 2–50 kg ±50 g / 4–110 lb ±0.1 lb Fpjdpoxvxf Isfx Ah Uop • 50–200 kg ±100 g / 100–440 lb ±0.2 lb • 200–227 kg ±150 g / 440–500 lb ±0.3 lb OPERATION AND STORAGE CONDITIONS Ambient temperature range: Operation: 5° to 40°C (+41° to +104°F); Storage: -25° to 70°C (-13° to +158°F) Relative humidity range: Operation: up to 93% (non-condensing); Storage: up to 93% (non-condensing) Atmospheric pressure range: Operation: 795 hPa to 1060 hPa (2000 m max); Storage: 500 hPa to 1060 hPa Comes with a wall-mounted charger block, and strap. We have 4 pcs in stock with fully functional battery. Good working condition. Please check out our other listings as well.

Year of construction: 2020, condition: good (used), FFP2 Mask Machine Production Line Manufacturer: Ruhlamat Model: MPL FFP2/016 Year of manufacture: 2020 Mask Production Line for N95/FFP2 Masks Dimensions (LxWxH, installed): 8921 x 1494 x 1985 mm Clearance around the machine: 1500 mm on all sides 50 Hz / 2.6 kVa Pressure: 6 bar Weight approx.: 2500 kg FFP2 masks consist of 3 to 6 layers of nonwoven fabric. This machine can produce masks with up to 6 layers. The machine is comprised of five stations: Station 1: Unwinding unit Station 2: Nose clip punching and welding, embossing roller Station 3.1: Ear loop printing and welding Station 3.2: Fold alignment Fpjdpfxsrm R Hdj Ah Uep Station 4: Contour welding and mask cutting

Condition: used, Fully functional Infors shakers (2 units available). Both machines are equipped with a cooling system, though it is not operational – we did not require it. The machines have been upgraded with advanced control systems, featuring a touch panel with sophisticated automation. Fpjdpfx Asxvlkqeh Usp Adhesive mats are attached inside both Infors units. Price is per unit. Specifications: Operating temperature range: 10–40°C Platform motion range: 60–250 rpm Max. program duration: 1000 h Height of a single chamber: 350 mm Platform size (WxL): 840x440 mm Dimensions (WxLxH): 1250x870x1990 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10404807, Professional recirculating chiller, purchased (used) via Amikon GmbH in January 2024. Always serviced and inspected by Julabo themselves. In 2025, among other things, the pump and power board were replaced. Invoices and reports are available and will be supplied. Specifications: - Type: FLW4006 (water-cooled) - Power supply: 400V, 50Hz, 3P+N+PE, 16A - Refrigerant: R452A, 700g - Capacity: approx. 4 kW - Temperature range: –15 °C to +40 °C Fpedpsw U Exgjfx Ah Uep - Temperature stability: ±0.5 °C - Serial number: 10404807 Condition: - In very good technical condition - Immediately ready for use - Including documentation and maintenance invoices

Condition: used, This listing is for a Hulme Martin 10/3319 Heat Sealer The unit is in full working condition and is ready for immediate release. Fpedpfx Asxuiv Ijh Ujp This is an mpulse heat sealers (for like-for-like thermoplastic film welding), constant heat sealers (for laminated or foil materials), vacuum sealers and other ancillary equipment. Designed for durability (20+ years or more in service according to their marketing) and easy servicing via plug-in heater bars and affordable consumables.

Condition: ready for operation (used), The Systec DX-150 is a front-loading, horizontal benchtop autoclave with a 162-liter chamber, measuring approximately 500 x 1000 mm. It features microprocessor control, automatic water feed, flexible temperature sensors, multiple programs for solids, liquids, and waste, and interfaces for data transmission. The autoclave operates with a maximum temperature of 150 °C and 4 bar pressure and includes safety interlocks for door opening. Fjdpfxoxvp Uts Ah Uspp Key Specifications: Made in 2015 Chamber Volume: 160 L Chamber Dimensions: Ø 500 mm x 1000 mm Maximum Temperature: 150 °C Maximum Pressure: 4 bar Power: 380 – 400 V, 50/60 Hz, 16 A Good working condition. Please check out out other listings as well.

Condition: like new (used), Thermo Scientific ThermoChill II Recirculating Chiller For sale: Thermo Scientific ThermoChill II recirculating chiller – a professional device designed for precise cooling of laboratory and industrial systems. The unit is in factory-new condition, fully operational and ready for use. Ideal for use in laboratories, research processes, cooling of analytical equipment, lasers, spectrometers, vacuum systems, and cooled process circuits. Technical specifications (ThermoChill II): Cooling capacity: up to 1000 W Fodpfx Ahjxuzt So Uepp Temperature range: -10 °C to +30 °C Stability: ±0.1 °C Reservoir capacity: approx. 9.5 L Pump performance: up to 13.6 L/min Power supply: 115V/230 V / 50 Hz Dimensions: 62 × 36 × 60 cm Built-in manometer and digital control panel Manufacturer: Thermo Fisher Scientific (USA) + CE Inspected and ready for operation

Condition: used, This listing is for a Waters fraction Collector 111 chromatography system The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Fpedsxtbcqspfx Ah Uop Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Condition: excellent (used), Hirayama HV-110L Autoclave – 2017 – Excellent Condition – Ready for Operation For sale: Hirayama HV-110L steam autoclave (manufactured in 2017) – fully functional, ready for immediate use. The device comes from a university laboratory, where it was used only occasionally, exclusively for sterilizing laboratory glassware. Regularly serviced – the autoclave is in excellent technical and visual condition. Technical specification: Manufacturer: Hirayama (Japan) + CE Model: HV-110L Year of manufacture: 2017 Chamber capacity: 110 liters Temperature range: up to 135°C Operating pressure: up to 0.26 MPa Power supply: 230 V / 50 Hz Control: microprocessor with digital panel Working modes: automatic sterilization, drying, and cooling programs Fpodpoxuztxofx Ah Usp Safety features: safety valve, lid lock, temperature and pressure sensors Condition and origin: - Used equipment, fully operational. - Pressure and temperature tests performed. - Clean, no corrosion, chamber interior in perfect condition. - Ready for use without the need for additional investment.

Condition: used, This listing is for a 2Mag MIXcontrol 20 control unit for MIXdrive The unit is in full working condition and is ready for immediate release. It is a universal control unit for connecting one MIXdrive stirring drive. Fpjdpfxexrt U Ae Ah Ujp Speed range: 100 to 1,600 rpm. Maximum stirring power: 20 W. 4-step power setting for 25 %, 50 %, 75 % and 100 % output power — helpful when stirring large or viscous media (so you can choose “high power” vs “reduced power for continuous operation”). SoftStart feature: ensures reliable catching/centering of the stirring bar and safe acceleration at different speeds/viscosities. QuickSet: allows rapid setting of start‐ and maximum speed. Automatic memory function: remembers the last settings after power‐off, so when you power on you resume from last speed/power. Housing: Stainless steel material — robust, easy to clean, intended for intensive lab use. Interfaces: Besides standard model, versions are available with RS232, and optionally 0-10 V, 4-20 mA, USB, Ethernet, OPC UA, etc for integration into automation/data acquisition systems. This unit is designed to work with MIXdrive stirring drives of various sizes: e.g., MIXdrive 1, MIXdrive 6, MIXdrive 15, MIXdrive 60 and their high‐temperature “HT” versions. The manual emphasises that the choice of control unit greatly affects performance & comfort of the stirring drive Important: Proper matching of the stirring drive model and the control unit is required to avoid overload or damage. For instance, some smaller drives require the “eco” version.

Condition: excellent (used), Laboratory Freezer -86°C Thermo Fisher Scientific 88700V61 Fsdpfxsxuzp To Ah Uopp . Professional ultra-low temperature freezer for long-term storage of biological and laboratory samples within a temperature range from –86°C to –50°C. Model Thermo Fisher 88700V61 — a reliable unit with a capacity of 949 L, ideal for laboratories, research facilities, and biotechnology companies. . Technical data: • Temperature: –86°C • Capacity: 949 L • Power supply: 230 V / 50 Hz • Power consumption: 9.5 A • Climate class: N . Condition: used, 100% technically functional. Available: 4 units, price per unit

Condition: used, This listing is for a IKA Midi MR1 Digital Magnetic Stirrer. We have 4 available Fedpjxrt Ivjfx Ah Uopp The unit is in full working condition and is ready for immediate release. The IKA Midi MR 1 is a digital magnetic stirrer (without heating), designed for laboratory mixing tasks. It is part of IKA’s IKAMAG line of magnetic stirrers. “Magnetic stirrer” here means that a magnetic stir bar inside the vessel is rotated by a rotating magnetic field created by the unit, thereby stirring the liquid. Because it doesn’t include a heating function, it’s suitable where temperature control must be handled separately (e.g. with external heating or thermostatic baths)