Used sand blasting equipment for sale (143)

Condition: new, Year of construction: 2025, Desciption in english language after demand. Gjdpfx Aodulhvsh Eokd

Condition: refurbished (used), The system has been overhauled and is in very good condition. Is ready for immediate use. Has material discharge chute. Without filter system. Is under power. From location. Gksdpfsi Dt Dyjx Ah Esd

Condition: repair required (used), Year of construction: 1984, operating hours: 6,646 h, functionality: fully functional, total width: 4,300 mm, total height: 6,030 mm, total length: 3,750 mm, GUTMANN Shot Blasting Machine type PH315 Hook-type shot blasting machine for workpieces up to 2100 mm in height, 900 mm in diameter, and a maximum weight of 500 kg. The machine requires an overhaul and has not been started since it was dismantled and transported from Germany. Technical documentation is available in German. The machine is disassembled and stored outdoors. No CE mark. Currently equipped with 3x 1TZ90011DA234FB4Z turbines from Motorenmaier, 11 kW/12.6 S1. As spare parts: 3x TYP RF132S/20K from AGTOS, 7.5 kW (blades require repair). Tungsten plates for internal repairs of the shot blasting chamber are also included as spare parts. Godpfx Aswtpxijh Eokd Total width with guides: 4300 mm Total height (assembled): 6030 mm Total length with guides: 3750 mm

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. Gksdjwdgrzepfx Ah Eod The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: good (used), Hook type shotblasting machine 1800x2500 with motorised hook with crane SIRSI Type: Hook type Max. diameter of workpiece: 1800 mm Max. height of workpiece: 2500 mm Max. workpiece weight: 3.000 kg Machine hoist capacity: 1x 3.000 Kg Nr. Of turbines: 3 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 3x 7,5kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Gksdpfx Ahswrxczs Ejd Total length of machine:

Condition: repair required (used), Year of construction: 2008, operating hours: 4,000 h, functionality: limited functionality, Shotblasting machine for plates and europrofiles. 2.6 m width, 0,5 m height, 12 m infeed and 12 m outfeed motorised rollers. Machine is in working condition but needs a specialist that can do some refurbishments. Some refurbishments made already: - new suction ventilator motor, new turbine blades, interior protection plates like new, new elevator belt, new coupling between 1 turbine and motor. Needs refurbishments: - electrical cabinet (machine runs with a new controlling system, old control panel is not setup and not functional) Gkjdpfovgbcuox Ah Ejd - brush repair (present but defective - we are not using it) - electrical connections and sensors (some of them present but not used)

Condition: used, Year of construction: 2004, functionality: fully functional, air demand: 3,400 m³/h, DISA shot blast machine Model : SPH 2-5.5/12 Year : 2004 Max.loading limit of hook spindle : 300kg Height of hook spindle up to floor : 2018mm Max.⌀ of workpiece : 550mm Max. length of workpiece : 1200mm Number of blast chambers : 2 Air consumption of dust collector : 3400m³/h Blast wheel ⌀ : 342mm ( 13.5´´) Power : 2x7.5KW Godpjwpquqjfx Ah Eskd Installed power (without dust collector) : 25KW Control : SIEMENS Weight : 4600 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: 27324-1/1, input voltage: 400 V, Shot Blasting Machine Parts Three new Gostol tst turbines for shot blasting machines/surface treatment of metal elements. Godpfx Aowrp Nfsh Eskd

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Gkodswdgpgopfx Ah Ejd

Condition: good (used), Year of construction: 2008, Hook type shotblasting machine 2700x3500 with motorised hook with crane CARLO BANFI Type: Hook type Max. diameter of workpiece: 2700 mm Gkodpfxjwq Ru Hs Ah Eod Max. height of workpiece: 3500 mm Max. workpiece weight: 12.000 kg Manual blasting chamber: YES Blow off chamber: YES Machine oppening width: Nr. Of turbines: 16 Turbine type: 360 Turbine wheel diameter: 360 Power of turbine: 16x 11kW Max. turbine flow: Type of transport rail: I Cleaner type: airwash Foundation: YES Housing protection: Mn+ rubber Filter: YES Total width of machine: Total height of machine: Total length of machine:

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). Gjdpfx Aswdgi Hsh Ejkd The process can be manual or fully automated as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: excellent (used), OMSG CWB 850 4/FAC Type: Wire mesh conveyor Max. width of workpiece: 850 mm Max. height of workpiece: 450 mm Nr. Of turbines: 4 Turbine wheel diameter: 350 mm Gksdpfx Ahjwm Dbxj Esd Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min x 4 Transport speed: 0,5 - 5 m/min Cleaner type: Airwash Filtering unit: Included Foundation: no Total width of machine: app. 3.000 mm Total height of machine: app. 5.000 mm Total length of machine: app. 7.000 mm Max installed power: app. 70 kW

Condition: good (used), Year of construction: 2018, Hook type shotblasting machine 500 kg TECNOBLAST GHIBLI 500 S/2 - 10x15 Type: Hook type Gedpswm Attofx Ah Ejkd Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm !!! YEAR OF PRODUCTION 2018 !!! Machine is in very good condition. Ready for operationa !!! VERY GOOD !!!

Condition: good (used), Hook type shotblasting machine 250 kg Gjdpfx Aswm Ar Neh Eokd TURBOTECNICA DELTA GR 7-10 Type: Hook type Max. diameter of workpiece: 750 mm Max. height of workpiece: 1000 mm Max. workpiece weight: 250 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 260 Turbine wheel diameter: 260 mm Power of turbine: 5,5 kW Max. turbine flow: 74 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 2.000 m3/h Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is ready for operation

Condition: good (used), Year of construction: 2012, COGEIM STL A 2200 / 4TR Mesh wire shotblasting machine for stone Type: Wire mesh Max. width of workpiece: 2200 mm Max. height of workpiece: 400 mm Max. workpiece weight: kg/m Machine oppening width: mm Nr. Of turbines: 4 Turbine type: 380 Turbine wheel diameter: 380 mm Power of turbine: kW Max. turbine flow: 155 kg/min Gedper Nbyzsfx Ah Eskd Transport speed: Cleaner type: airwash Foundation: needed Housing protection: Filter unit: Included - bag type Machine is selling in current condition. Refurbishment is also possible!

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 125 L Max. batch weight: 300 kg Max. component weight: 10 kg Compartment diameter: 700 mm Gsdpfx Aovpgr Tjh Eekd Compartment width: 875 mm Nr. Of turbines: 1 Power of turbine: 5,5 kW Max. turbine flow: 75 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES 2.000 m3/h Max. installed power: app. 11,5 kW

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 800 L Max. batch weight: 2000 kg Max. component weight: 150 kg Compartment diameter: 1350 mm Compartment width: 1350 mm Nr. Of turbines: 2 Power of turbine: 11 kW Max. turbine flow: kg/min Cleaner type: air Foundation: no Housing protection: Mn Req. air flow: yes Gedpfolf Hq Njx Ah Eskd Total width of machine: mm Total height of machine: mm Total length of machine: mm

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Gkjdpfsvpgq Nox Ah Eed Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!