Catalog No. : 5249
Type: COMBI-CUT
Producer: Boschert
Made in: 2006
Characteristic:
Total hours: 30 000 h
Maximum punching force: 280 kN
Table length (X): 2500 mm
Table width (Y): 1250 mm
Brg0pzmid2
Maximum travel length X-axis: 2500 mm
Maximum travel length Y-axis: 1250 mm
Maximum table load (evenly distributed): 200 kg
Maximum feed rate in X-axis: 60 m/min
Maximum feed rate in Y-axis: 60 m/min
Max. Sheet thickness: 12 mm
Plasma power: 160 A
Plasma source: Kjellberg HiFocus
Machine...
Control Heidenhain
x-travel 450 mm
y-travel 400 mm
z-travel 320 mm
4.800 mm
table load capacity - central/maximum 400 kg
tool adaptor SK40
Bihbhl8ckw
tool adaptor 14 Stück
weight of the machine ca. 1,9 t
TWIN 1500 x 3000 CNC building year 2005
E3bd8qt
- Trumpf tooling system
- Head 1: Rotation
- Head 2: RevoTool (6-ways)
- X-Axis: 3000 mm
Y-Axis: 1500 mm
- Automatic repositioning of the clamp
- 2-Axis CNC control Labod
- Fast hydraulic
- Waste removal suction
- Brushes on the table
The punching machine will be technical checked and broken parts changed. We grant 6 months used machinery warranty on all punching machines which have been technical checked and offered by us. If needed setting in...
Standard equipment:
- Security light barriers
- 17 cartridges and die carrier
- 2 sheet clamps
- Full rotation of all tools
- NC-controlled, maintenance free three phase current drive
- automatic repositioning
- compensation of tool length variation
- part removal chute (500mm x 500mm) with 2 containers
- Good part box
- punching slug suction system
- Programmable spray tool lubrication with 2 containers
- Programmable stripper
- adaptive stroke-length control
- network connection RJ 45
- 3,5’’ ...
Maximum force (pressing): 300 kN
Working range without position: 1 270 x 2 080 mm
Working range with position: 1 250 x 3 000 mm
Reposition in X axis allows to process sheet metal up to dimension 3 000 x 1 250 mm. Maximum weight of sheet metal is 95 kg. 120 kg when moving only the X axis.
Wmbusoyv
Maximum material thickness (sheet metal): 6.3 mm
Maximum weight of material (sheet metal): 49 kg
Maximum material thickness (flat bar): 10 mm
Maximum weight of material (flat bar): 100 kg
Pressi...
sheet width 1250 mm
plate length 2500 mm
plate thickness . mm
Gb29dymbc
Control Siemens
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Rotation head is as good as new with 8 tools, other extensive accessories available.
Btobcyiwzr
The punching machine is currently still in operation and fully functional.
Due to reasons of age, company abandonment. All sheet metal working machines are for sale and can be inspected.
There is a good loading possibility.
Punching, nibbling and forming center with 30 tons punching force
reconditioned machine with 12 months warranty
FANUC® - CNC - control with 15" touch screen - CAD/CAM software
Machining range 1.500 mm x 3.000 mm (with repositioning up to 6.000 mm)
Maximum sheet thickness 6 mm
Maximum workpiece weight 150 kg
Tool magazine for 15 indexable tools
Maximum 150 tools when using a Multitool - TRUMPF® tool system
Ga0ck88bk
Dimensions 6.2 x 5 m
Drive power 12.5 kW
TWIN 1250 x 3000 CNC building year 2005
- Trumpf tooling system
- Head 1: Rotation / RevoTool Index (7-ways)
- Head 2: RevoTool (8-ways)
- X-Axis: 3000 mm
Y-Axis: 1250 mm
- Automatic repositioning of the clamp
- 2-Axis CNC control Labod
- Fast hydraulic
- Waste removal suction
- Lubrication of the tools
- Brushes on the table
Btmn2bdmvt
The punching machine will be technical checked and broken parts changed. We grant 6 months used machinery warranty on all punching machines which have been te...
Amada cnc punching machine type Vipros 2510 KING
General data
Dimensions width 5330 MM
Dimensions depth 5125 MM
Dimensions height 2160 MM
Weight of the machine 11000 KG
Bte29877kd
Control system
Brand FANUC
Model SERIE 18-P
Main drive
Punching force 196 KN
Movement
X-axis travel 2500 MM
Y-axis movement 1270 MM
Tools
Number of index 2
Media
Electronic main connection 400V
Power consumption 24 KVA
Chip conveyor Yes
Internal cooling Yes
This AMADA VIPROS 2510 KING punching machine was manufactured ...
Maximum force (pressing): 20 t
Maximum thickness of the sheet metal: 6 mm
Maximum travel length X-axis: 2500 mm
Maximum travel length Y-axis: 1250 mm
Maximum table load (evenly distributed): 120 kg
Maximum punching speed (number of impacts per minute): 1100 1/min
Maximum marking speed (number of impacts per minute): 2800 1/min
Maximum stroke of the upper tool: 40 mm
Maximum feed rate in X-axis: 100 m/min
Maximum feed rate in Y-axis: 75 m/min
Accuracy of programming: -0.1 mm
Machine he...
Service-maintained punching centre Trumpf TC 500R, year 1996.
max. working area (without repositioning) 3000x1600mm.
Btidam2shy
Due to procurement of new equipment for sale ex place.
Dismantling takes place in week 28.
Immediately available from site :
CNC Trumpf punching - nibbling machine Trumatic
Type Trumpf Trumatic TC 260 R
Year of manufacture 1990
CNC control Trumagraph CC 300
X working range ( without repositioning ) 2700 mm
Y working range 1600 mm
X Speed 90 m / min
Y Speed 60 m / min
Speed Simultaneous 106 m / min
Dmle7s2
Stroke sequence max 320 strokes / min
Punching capacity 25 to
max punching diameter 76,2 mm
Sheet thickness max 6,4 mm
max. workpiece weight 200 kg
Numb...
Control system: Pentium
2skroy
Maximum force (pressing): 30 t
Table length (X): 2520 mm
Table width (Y): 1900 mm
Maximum travel length X-axis: 1250 mm
Maximum travel length Y-axis: 1000 mm
Head stroke: 60 mm
Total power demand: 4 kW
Machine weight: 3850 kg
Large format sheet metal working center/CNC punching nipple machine
Only about 19,800 operating hours!
With function forming and turning
Manufacturer: FINN POWER (now Prima Power)
Model: F6-25 SB V
Control: Siemens Sinumerik 840 D
Year of construction: 2000
TECHNICAL DATE:
Punching force: 300 kN
Max. material thickness: 8 mm
Number of tool stations: 20 pieces
Tooling system: Thick Turret
Max. tool diameter: 89 mm
Sheet size: Large format 3,000 x 1,500 mm
small parts flap, max. part size:200...
Immediately available from location CH :
CNC punching - nibbling machine Finn Power
Type F 5 - 25 SB / AM
Year of manufacture 1996 TOPCONDITION
CNC control Sinumerik 840 D
pressure capacity 30 to
Max sheet thickness 8 mm
Punching stroke hydraulic
Number of tool stations 21 pieces
CNC turning tool
Number of turning tool stations 10 pieces
Max table load 200 kg
Bswhifceji
Clamping claws pneumatic 2 pieces
Max sheet size 1270 x 2530 mm
Speed of axes X 80 m / min, Y axis ...
A used punching / nibbling machine
Manufacturer: FINN-Power
Model: A5 SV
Year of manufacture: 2002
Operating hours: approx. 47.350h
Sheet size: 2530x1270mm
The machine is in a good condition and currently still in operation.
Last repairs:
January 2021 a major repair, the punching head was renewed, the old one incl. new seal set is included, as well as a few other things were replaced too. Only the punching cylinder itself has cost 12.800Eur net.
November 2020 a position sensor was exchanged, cos...
Punch capacity: 20 Ton
Sheet thickness: 6,4 mm steel
Punching area: 2.500 x 1.500 mm
Punch. area with repositioning: 5.000 x 1.500 mm
X-axis travel: 2.552 mm
Y-axis travel: 1.550 mm
Positioning speed: 50 m/min.
Sheet clamps: 3 pcs.
Punch station: 20 positions, incl. 4 auto index stations
Auto index stations: 0° - 360° x 0.01° incr. punch upto Ø 88,9 mm
CNC control: LVD MNC 32000
Including:
- Large variety of tooling
- Safety light guard
- Vibration absorbers
- Documentation & Manuals
En...
Max. Cutting force 220 kN
connected load 29 kVA
Compressed air connection 7-14 bar
working area X+Y without setting back 2500 x 1250 mm
traversing range X -50 - +2550 mm
traversing range Y -7 - 1280 mm
max. sheet thickness 8 mm
active downholder power programmable in steps 4,5-20 kN
Max. Workpiece weight 200 kg
max. speed X-Axis 100 m/min
max. speed Y-axis 60 m/min
Ibtotvq
max. speed C-axis 330 rpm
simultaneous X+Y m/min
stroke sequence punching E-1 1200 1/min
stroke sequence signing 2800 1/min
...
- later converted to a pincer machine
- can be used as slinging machine 3000/650 mm
- can be used as tong machine 1500/625 mm with 25 tons punching power - - the machine is optically and technically in a very good condition
Bygnk2pc
- with standard accessories
- with programming instructions and circuit diagram
- incl. tool set and tool setting device
- Trumpf tool holder size 3:
105mm diameter.
Tools:
- Punch needle: 2 x 3.0, 1 x 6.0/8.2/10 mm
- oblong punch: 2x 2.5x38, 1x 22.3x57.3 mm
- oblong...
please only inquiries from Germany Postcode area: 2,3,4,5!
Technology
A new reinforced and even more massive frame, double motor in the Y-axis
Volume + 30% - Velocity + 30% - Acceleration +50
D8ds7xh
With the new punching machine STX Plus the C-frame block has been enlarged in width and height. This means that in future punching work will be even more stable and precise.
Boschert Combicut TWIN 1500 x 3000 CNC Z Rota Index Revo
TRUMPF quick tool change system
Plasma cutting head with Kjellberg 160i plasma source
punching force: 2x 280 kN (28 tons)
+ Suhner thread cutting and drilling head - M16
Travel: x- 3000 mm (repositioning up to 9999 mm)
y- 1550 mm
punching arm throat: 1850 mm
Tool system Trumpf Gr1-3(105mm)
Head 1 punching rotation (Trumpf system up to tool size 3) with
Revotool Indexable
head 2 punching machines Revotool/Trumpf system up to too...
We sell two Finn Power punching presses TP 2525 BIF2 / AM; year 1996 (ready for use)+ TP 2525 IF2 / 21 / AM, year 1996 (responsible for the repair, or for the spare parts).
Finn Power TP 2525 BIF2 / AM punch press, regular maintenance, overhaul of the tool holders in the magazine
Finn Power TP 2525 IF2 / 21 / AM punch press, machine out of service, for spare parts.
Technical parameters:
Finn Power TP 2525 BIF2 / AM
Control: Siemens Sinumeric 3N
Bmb3w7dics
Compressive force: 30 t - 300 kN
sheet s...
Boschert Combicut EL 1250 x 2500 CNC Z Rota IndexQuick tool change system TRUMPFPlasma cutting head with generally overhauled Kjellberg 160i Plasma sourcePunching force: 280 kN (28 tons)Traverse x- 2500 mm (repositioning up to 9999 mm) y- 1250 mmPunching arm unloading:1650 mmTool system Trumpf Gr1-3(105mm)Head 1 Rotation (up to tool size 3)) with Revotool Indexable Head 2 Plasma cutting control Labod 32060 Graphics control / workshop programmable incl. external programming workstation Metalix Ma...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.