1 cultivator Lemken agate completely refurbished with new tips / flock
Approx. 2.50 m
Depth: approx. 2.60 m incl. cage roller, approx. 1.90 of only the cultivator
with 11 tines
Frame height approx. 600 mm below
Frame height 750 mm above
Total height 1350 mm on the three point linkage
1 cultivator | Heavy cultivators of Lemken Onyx
Approx. 2.60 m
Depth: 2 m
with 9 tines
Frame height approx. 540 mm down (forward)
Frame height approx. 700 mm above
Total height 1260 mm on the three point linkage
Working width 1.40 m for three-point linkage for tractor with 30/40 HP gear drive with a 1 - speed gearbox (540 RPM)
Chain transmission for main motor 4 blades per flange, a total of 28 knife depth control via slide poles 1-piece rear door adjustable lifting device points PTO shaft with shear bolts new knife weight approx. 226 kg ABM. approx. 650 mm deep, 1530 mm wide, 990 mm high, depth 165 mm
Dozer blade for corn, silo Dozer blade, corn Dozer blade shield is round-shaped for better material flow working width 3000 mm sign height 1250 mm wall thickness 18 mm-Lieferzeit approx. 2 weeks weight can according to customer requirements are manufactured to approximately 1000 kg weight
- 4 skibowy
- możliwość odkręcenia ostatniej skiby i używanie jako 3 skibowy
- kołkowe zabezpieczenie przed kamieniami
- kółko podporowe
- węże hydrauliczne
- sprowadzony - nie używany w Polsce
Stan Bardzo Dobry
Cena 7500zł more
Sturdy, thick-walled gear trough with large cross section - extremely robust design of the propulsion organs - angled and rotated teeth made from boron steel - toothed packing roller, PTO, cardan shaft combination with seed drills possible.
Working width (m): 2.5
Power at the power take-off shaft (PS): 50
PTO speed (min-1): 540 and 1000
Maximum permissible tractor power (HP): 140
Cardan shaft with adjustable clutch
Weight with Zah... more
Land roller, green country roller, lawn roller, bottom roller, roller
-Lawn roller, diameter 1200 mm wall thickness of the pipe 18 mm.
Transport width 3000 mm
Working width ca. 2750 mm
-with seal and warning signs
Bearings with polyamide jacks
-Leergewicht approx. 2100 kg
platter approx. 5000 kg
Levelling sand, route planer, road sign, way Dozer blade
Working width 1800-2500 mm
Plate height 600 mm
-with HARDOX wear track 200 x 20 mm Höhenverstelbar
-with 2 x smoother from HARDOX angle adjustment bar
-Lieferzeit approx. 2 weeks
Weight according to customer requirements
Dimensions 1800/1900/H1500 mm
Weight 1000 kg
Hitch-on rack cat. II and III
Stable double tubular frame 100 x 100 mm
Diameter 560 mm
Stone protection rubber segments
Maintenance-free bearings SKF agri hub
Parallel-run edge plates
Harrow can be retrofitted
Folding edge discs 3 m working width
Mechanical working depth adjustment on
V-ring platen 600 mm
Agripol blue power short disc Harrow
Blue power disc Harrow new machines from 3.590 EUR Excl. 19% VAT
Very clean process, sand blasted and powder coated.
Working widths of 2, 0 m-6 m 4 m hydraulic folding.
Basic equipment: serrated washers 560 mm, cage roller, maintenance-free closed camp.
Depending on the execution from 3.590 EUR Excl. 19% for the extra you get VAT price:
Roof ring roller spring stamp roller
Rubber knife ring roller
Lighting with warning signs edge ... more
The root cutter is equipped with 6 hard inserts you can rotate several times at blunting. The plates have a long service life. There are the plates with 3 different chip angles to optimally handle various hard woods. You can also place the cutter to cut out flower troughs or perform other milling.
Article number: MT18 WF220
Hydraulically retractable and hydraulically driven Auger.
The machine is NEW and if necessary will be built according to your requirements.
This Auger is used in forestry, viticulture, fruit and horticulture plants setting.
He has a three-point shot and a coupling to attach with the materials Halim to even one.
Drill bit diameter is 150 mm
on the side he is hydraulically extendable approx. 500 mm
The price is after execution of 1750.-to 2850.-Please ask!
The machine can be seen... more
The root cutter is equipped with 9 hard indexable inserts that you can rotate several times at blunting. The plates have a long service life. There are the plates with 3 different chip angles to optimally handle various hard woods. You can also place the cutter to cut out flower troughs or perform other milling.
Article number: MT18-WF300
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
All brand names are the property of their respective owners. Thorsten Muschler GmbH
does not accept any liability for the content of linked websites.