Your location was not recognised (Change)
Enter e-mail address
or
Move
Model makers lathe lathe Zimmermann FZ DZUS 1000
Lathe Manufacturer Zimmermann Type DZUS 1000 Ma. No. 159 Built in 1984 5.2 kW Speeds from 55 to 1,700 rpm. Top width 1000 mm Tip height 500 mm support 220 mm With autom. Feed Weight approx. 1,100 kg Item location: 59457 Werl The machine can be visited like to see power and tried out. A truck loading is available. We reserve the right to a sale. There is the way learned to examine suburb for sale articles. Specific questions should be clarified in advance. The inform... more
Profiling lathe LOCATELLI DISHMATIC 3
Copying lathe for round dishes, stool seats etc Workpiece diameter max. ca. 700 mm. Motor ca. 10 kW 3 frontal and 2 transversal copying units, hydraulic stroke Vakuum-clamping Manual feed more
Plate, shell u. Disc Lathe Hempel ERH-6
Maximum turning diameter: 600 mm Board thickness: 100 mm Spindle motor: 7.5 HP 2800 RPM. Power requirement: 10 HP Vacuum chucks with Vakumpumpe & Behaelter.Mit different,. Can performed in operation and be adjusted according to your pattern. more
Copying lathe Hempel CKS-12
Copying lathe Manufacturer: Hempel Model: CKS-12 For the production of shaped turning parts in small series Without the use of form steels scanning sheet metal stencil or wood model Maximum turning length: 1200 mm Drehdurcmesser Max: 250 mm Spindle motor: 5.5 KW Hydraulic motor: 2.2 KW more
lathe-conventional-electronic COMEV Pico CM
turning diameter unbek. mm turning length unbek. mm swing diameter over bed slide mm centre distance mm swing diameter mm travel of tool-carriage mm Working widths mm Loading Number of cylinders total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
CNC-wood-turning-lathe hapfo 5000-CNC
hapfo 5000-CNC: fully refurbished, all motors and bearings replaced, new electronic Center distance 1500mm Center height 250mm max copy Diameter 250mm Accessories: two four-jaw followers two ring-followers V-steel sharpening machine ..... more
lathe semi-automatic LOCATELLI MK 1200 SP
Equipment: 5 hydraulic driven supports at the back, movable over the machine width. 3 units at the top. Maximum workpiece length: 1200 mm. Maximum workpiece diameter: 180 mm. Automatic cycle: workpiece tension, walking ahead and walking backward of the trimming units ( according to the model), cutting fine by means of the profile-knifes, returning. Motors: shaft 12 kW (with brake) more
Wood lathe with copy EV Elio Valenti hydraulic
Hydraulic wood lathe with copying EV Elio Valeri Distance mm 1300 more
Woodturning lathe Elu DB 180

Woodturning lathe Elu DB 180

Hösbach Rottenberg Germany
1984
USED
ELU DB 180 ELU turning machine type. 180 DB table machine Distance between centers 980 mm center height 200 mm Motor 1.1 KW 230 V 550 Hz 7.4 A turning diameter max. 380 mm Speeds: 800-1500-2350 U / min Year 1984 more
Centauro copying lathe type T2 100 Centauro T2 100 (35349)
cleaned, function checked, test run Concentricity max. 3/10 mm Customized Copy rotator used, good condition manufactured by Centauro type T2 100 top width ca. 1000 mm top height ca. 250 mm hand copying unit live grain cone point motor 380 V motor 2 revs/motor pole switch speed steps 510 / 700 / 900 / 1020 / 1400 / 1800 rpm required space ca. l x w x h mm 2300 x 1000 x 1600 weight ca. 500 kg located in  97447 Gerolzhofen sale in current condition as seen - free on truck - more
VERTICAL COPYING LATHE BALESTRIERI MATIC 120/4A
TECHNICAL DATA: Max turning length mm. 1200 Max turning diameter mm. 150 Cutter motor power KW 4 V380/ 50 Hz Spindles rotation motor power KW 0.75 V380/ 50 Hz Oleodynamic installation motor power KW 0.75 V380/ 50 Hz Tools-holder diameter mm. 145 Tool diameter mm. 35 Variable carriage advance speed mm/min 0/600 Variable spindle rotation speed RPM 20/50 Carriage advancement speed connected with spindle rotation mm/min 70/180 Tools speed RPM 4500 Overall dimensions mm. 2600 x 1000 x 170... more
lathe-conventional-electronic WEISSER UNIVERTOR C-1
turning diameter unbek. mm turning length unbek. mm swing diameter over bed slide mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
automatic copying lathe TORMADEX HIDROPAL 1400 E
Max. length: 1400 mm Max. diameter: 250 mm Hopper feed at the rear Reproductive tracer (tamplate or real modell) 2 front units and 3 jump-in knife tools on top more
TURNING DEVICE FOR PANELS HOMAG TD 31/25/12
- CE mark - Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) - To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) - Built-in electric cabinet and command panel - Total lenght mm 5500 Composed of: a) 1st table with motorized rollers, estimated dimensions mm 1300 x m... more
Automatic lathe Locatelli Dishmatik 3 | mit 1. Auftrag
Automatic NC-turning machine for end machining, with 3 frontal slide rests, 1 side and 1 backsupport, incl. 2 vacuum plates and vacuum unit 400V, 1. Hand Dimensions L: 190 cm, W 180 cm, H: 230 cm Accessories: Grinding Stock LEV D Built in 1994, with removable dust cover and 2 vacuum plates, 400V, 1. Hand Dimensions L: 80 cm, B: 60 cm, H: 140 mm Suitable for production of wooden plates and wooden bowls. There is the possibility, via a first, large order (initial order) to negotiate. The manufa... more
Copying lathe Killinger KM 5000 S-Hydro
Hydraulically controlled Copying lathe 380 V 2.2 kW spindle speeds: 190-250-400-550-600-450-800-1400-2200-2800 spindle as a hollow spindle: external thread M 33, inside cone MK 3 Copying length: 1500 mm copying diameter: 320 mm Hand turning length : 1600 mm height 250 mm length: 2.50 m width: 0.80 m height: to see about 600 Kg Accessories on pictures: 1.20 m weight more
Wood lathe Killinger Typ KM 2000 S
Killinger wood turning lathe 2000 S type KM Tip height 220 mm Top width 1050-1150 mm Turning diameter over bed 440 mm Turning diameter with turned spindle stocks 600 mm 450-800-1400-2200-2800 RPM. as shown with accessories like new condition - from training workshop checked Operating instructions more
Drechselmaschine HAPFO Albus AHDK 125 D / 650
Turning Machine Make HAPFO type Albus AHDK 125 D / 650 mach 64 Year 1978 Specifications: Center height 200 mm turning length 1150 mm spindle bore 15 mm spindle M 33 / MK 2 8 spindle speeds 400-3200 rpm. Tailstock taper MT 2 Motor power 380 V / 2 HP Weight approx 220 kg Overall dimensions 2000 x 700 x 1250 mm - hand support - Three-jaw chuck - collet chucks - 10 Drechselbeitel - chuck used, in very good condition more
carving machine REICHENBACHER RM 1220 L
Copying carving machine for round or flat pieces 1 Modell in the middle, 12 positions to copy Centerdistance of the spindles: 200 mm. Max. workpiece length: 1,20 m. 12 motors each 0,5 kW, 17300 rpm more
TURNING DEVICE FOR PANELS (LONGITUDINAL  RBO (BIESSE Group) LTC (CONO)
TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) - Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) - To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) - Built-in electric and command panel - 1st Table (longitudinal) with motorized rollers - Motorized turning de... more
Copy lathe Hempel CH 8
18 years reliably in our operation started. Semi-automatic copying lathe with templates, suitable for rotating parts such as ladder rungs and legs, hydraulic 1 x Precutting and 1 x contour steel 2 x hand support for cross processing Turning length: up to 800 mm Turning diameter: up to 100 mm Power 2.4 kW (unfortunately, no nameplate present on machine, vintage inaccurate) more
Woodturning machine Hapfo AP 2000
-Year of production 1992 -0.55 KW motor (230V) -Tip height 200 mm -Top width 1100 mm -Adjustable speed of 340 - 4000 RPM -incl. Copy Setup -incl. Proxys facility -incl. tool accessory set for mediation on behalf of customer more
Drexel lathe unbekant
stabile : 2 Stufen 700/1400 U/min 0,7-0,95 KW 50 Hz 380 Volt Drehlaenge: ca. 1000 mm Drehdurchmesser ca. 400 mm Spitzenhoehe: 210 mm Ausstattung: Reitstock, lange Aufliegekonsole, 4-Backendrehfutter TOS 125 more
Wood copying lathe HEMPEL CHS 12
Wood copying lathe HEMPEL Fabr type CHS 12 Specifications: Turning diameter 250 mm turning length 1200 mm 6 spindle speeds 1100 to 5800 rpm. hydr. Clamping pressure of the tailstock 20 bar Power 12.5 hp Dimensions 2230 x 1500 x 1450 mm with - used 2 Einstechsupporte, in good condition more
Copy lathe Hempel CHS 9
Heavy duty machine - with hydraulic feed Capacity app.: 60 - 150 pcs./h Max. workpiece length : 900mm Max. workpiece diameter: 250mm Hydraulic profiling units: 4 pcs. more
Lathe / turning machine Hapfo Albus AHDK-P 125-D
Hand machine Year built: 1980 Condition: Function tested Specifications: Engine: 1.36 / 1.90 rpm: 1500/3000 Location: Hochheim Availability: Immediate more
Drechsel machine Scheppach DE-I50

Drechsel machine Scheppach DE-I50

Hösbach Rottenberg Germany
1980
USED
Scheppach Drechseleinrichtung - Root Drechselvorrichtung - 2 Drehzahlen 1100 and 2500 rev / 1 - Spitzenweite 720mm - Spitzenhöhe 150mm - with Handauflage condition: very good cpl. Checked! Sonderpreis: G-2906-M3MXY (Without Thickness Planer) more
Woodturning machine Zimmermann
Manufacturer: Zimmermann Tip diameter: 94 cm Centre distance: 187 cm Kreuzsuport multi fix Removable bed 30 cm 18 speeds price net plus VAT more
Turning machine Hempel CH 12
Turning machine Hempel type: CH 12 working length 1200 mm including 1 box with tools approx. 30 profile knifes backrests in different diameter approx. 25 – 70 mm with drilling unit in working condition more
Technical wood turning and wood turning machine  FAUST PBE 315 x 2000
wood turning and wood turning machine Fabr FAUST Type PBE mach 800 111 Built in 1965 for model details: Height 315 mm turning diameter over bed 630 mm turning length 2000 mm turning diameter in the bend 1000 mm Spindle speeds, stepless to 2000 rpm. Drive power 4.0 kW Dimensions L x W x H 3300 x 1000 x 1200 mm Weight 1500 kg - 190 mm chuck - add. Flans on the face plate 800 mm [...Technical data truncated] more
Button wood lathe HEMPEL
Turning with lots of accessories The machine is fully operational more
fully automatic lathe of scantlings Hempel VKG
Max length: 700 mm Maximum turning length: 64 mm Maximum turning diameter: 64 mm (when balls 50 mm) Continuous power: 300 to 1600 pieces / hour. Spindle motor: 5,5 kW; 2800 RPM. more
Turning device Scheppach

Turning device Scheppach

Hösbach Rottenberg Germany
USED
Scheppach Woodturning Attachment Add-turning device Distance between centers Center height 700mm 150mm palmrest live center G & -2645-M3LCE more
Drechsel machine Holzmann --
 - Motor 1.1kW - ​​copying device - Height 210mm - Distance between centers 1580mm - Bezel more
Disc- bowl- and ring turning machine Hempel ER/Sp
Disc- bowl- and ring turning machine Hempel type: ER/Sp turning diameter max. 250 mm clamping length max. 400 mm turning speed variable by belt disc with vacuum pump with sanding stand for connection to the vacuum pump more
Wood-turning machine SCHEPPACH DMT 180
Wood-turning machine Fabr SCHEPPACH type DMT 180 fabr 156 Year 1993 Specifications: Center height 180 mm diameter over bed 380 mm Distance between centers 1000 mm 5 Spindle speeds rpm 600/900/1400/2100/3100. Spindle head M 33 / DIN 800 tailstock taper MT 2 quill travel in the tailstock 60 mm Power 0.9 / 0.55 kW Power supply 220 V, 50 Hz Dimensions L x W x H 1520 x 520 x 1240 mm with - Steel Edition - 5 Drechsel Ahlen - stand very little used, in very good condition more
Plate lathe Hempel
Tell lathe The lathe is fully able to function Various accessories for the machine is given more
Lathe lathe Killinger KM 5000 S
Wood lathe copying Drechsler Bank lathe Killinger KM 5000 S Spindle speeds / 4 levels: 670 / 970 / 1580 / 2800 RPM. Tip height - 250 mm Top diameter - 1600 mm Copy length – 1200 mm Kopierdurchm. length - 200 mm,. maximum diameter of 195-500 mm incl. accessories more
Scantling lathe Hempel  Type O
Scantling lathe Hempel type O To the manufacture of short form parts such as buttons balls or similar, from the square or round bar,. Turning length ca, 60 mm turning diameter approx. 60 mm Power requirement 3 HP Machine can visit and be tried. more
Stencils Lathe HEMPEL CKS 120
Turning length max. 1200 mm more
Furniture knob sanding automat Hempel PK
Furniture knob sanding automat Hempel type: PK sanding diameter max. 100 mm sanding length max. 100 mm compressed air need 6 bar input power approx. 2,55 kW The machine is in a very good condition, can immediately start to work again. more
CNC Drechsel machine Killinger  KM 8000 Lignotronic CNC
Tip height 300 mm Top width 1700 mm Engine 4.0 kW Spindle speed 500-4000 R/min Feed continuously variable 0-10 m / min Using the color monitor 14" more
Woodturning machine semi-automatic HEMPEL CL 8
Woodturning machine with accessories The machine is run repeatedly inserted so words, for special parts to zumVerkauf You can now work with the machine more
Lathe GOMAD DNXA Lathe GOMAD DNXA Lathe GOMAD DNXA
Lathe GOMAD DNXA location Gorzow Wielkopolski Terms of delivery Pick your own Cost of delivery Application Startup Type Application description Comments Lathe GOMAD support length 1000 mm Diameter 400mm more
Grinding - and polishing drum Unbekannt keine
For grinding and polishing of small parts, balls and similar items; Geared motor 3-stage Riemenschbeibe with timer; Power 2 kW; Drum diameter of 100cm; Drum width 35 cm with 4 compartments Machines can be seen in the Betrienb and tried. Pricing at the factory. more
Grinding length max. 1200 mm more
Lathe Magma PDB 1000 G
-Top width 1450 mm -Tip height 200 mm -Motor 1PS -Year of construction 2005 more
Hydraulic trays - Tellerdrehvorrich
Hydraulic shell plate turning device -to the turning of bowls and plates in series -the copier scans a stencil -HDF board 3-6 mm or wood pattern from -Copy stroke: 80 mm -Transverse movement of the copy slide, adjustable -with hydraulic pump -fits on each hand lathe with a centre height 250 mm more
Turning machine Hager HK 330
Drechselmaschine Hager Kannellier- und Wundfraese Type: HK 330 Spitzenweite 1500 mm Spitzenhoehe 200 mm more
Save search

to

to

Change search