Condition: like new (used), knife: WP Z2 V2 flight circle (ø): 160 mm drilling: 40 mm length: 17 mm material: steel Labelling: MEC Fedpfx Ahexvy Abe Ujpp

Condition: used, Tenoning spindle 1 St. Fpodpfxjxvtgge Ah Uop Number of milling agregates 4 St. Spindle diameter 50 mm 1 used Weinig Unicontrol 6 ----- Technical Specifications Summary ----- 1. Crosscut saw ----- Pneumatic crosscut saw, against 8-way turret stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for detecting the saw cut: Manual length stop 4100 mm 1. Tenon and slotting spindle ----- Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle - synchronous and counter-rotating spindle ----- Position: vertical right Number of tools: 1 Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 Tool clamping length: 320 mm Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool radius: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 Spindle speed: 6000 rpm Spindle diameter: 40 mm Maximum tool radius: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bead saw (horizontal-vertical) Cycled ----- Position: horizontal, top Number of tools: 1 Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial cycle, 2 positions Radial cycle, 2 positions Other features ----- Flanging device for tear-free flanging Double parts package Return device for 1-person operation at working height: Swivel bath Screen control, 99 programs Sloped window device Electronic angle display for sloped windows INCLUDING window tools OPPOLD, year of manufacture 2013: Oppold IV 68/78/92 Wood Oppold IV 68/78 Wood-Aluminum Sale of tools in the condition, scope and with accessories as available in our warehouse. Note on window cuts, tool drawings, tool system listings: Engelfried does not guarantee that the tools actually available correspond to the systems mentioned and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Fodpfx Ahoxlt Ebo Ujpp

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Fpjdpfx Ajxwaz Hsh Usp

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Fsdpfx Asxvivqsh Uopp Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Fpedpfx Ahewka N Te Ujp Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, knife: Reversible blade Z4 flight circle (ø): 125 mm drilling: 40 mm length: 130 mm Fodpfx Asxvyzweh Uspp material: steel

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Fodpfx Ajw I A N Ajh Uopp

Condition: not inspected (used), Used machine Fpedpfsxviuaex Ah Ujp Used vertical panel saw by Holz-Her, type 1210 Older model; suitable only for coarse cutting Technical data: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Maximum saw blade diameter 300 mm Motor power 4 kW Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2001, Used machine Year of construction: 2001 Fpodpfx Ahsw I Ug Ho Uop Condition: Function tested Equipment and technical data: Milling aggregate 4.4 kW HSK 63 F tool holder Speed 1,000 - 18,000 rpm water-cooled Tool changer: 4-fold lateral Drilling head: 9 vertical drilling spindles in 32 mm increments Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAm 32 Vacuum pump 40 cbm/h Incl. vacuum cups Travel distances: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg Machine is delivered complete in all mechanical, electrical and electronic components and overhauled where necessary All guides checked; console guides replaced New PC control unit for the TWIN CAM control system All axis modules checked and serviced Location: Hochheim Availability: by arrangement

Condition: used, knife: planer blade Z4 flight circle (ø): 125 mm Fpodpoxvyy Hjfx Ah Ujp drilling: 40 mm length: 180 mm material: steel

Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel in welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir - Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg) Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Very easy operation - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm height min: 150 mm, max: 1400 mm depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Fodpfx Ahoxvitij Uopp Operating manual in German language Completely overhauled by Ganner, 6 months parts warranty Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: Well-maintained / Function-tested Equipment and technical details: Number of drilling spindles: 21 pcs., 32 mm pitch Drilling direction: from below & frontal Tilting: 0–90 degrees by handwheel Pneumatic material clamps: 3 pcs. Passage: max. 100 mm height and max. 640 mm width Motor: 1.5 kW Extraction diameter: 120 mm Fodpfexvnnfsx Ah Ujpp Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Warehouse location: Wetterau

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Fpjdpoxvirfofx Ah Usp Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1998, Used deduster Year of manufacture NE 250 W, right-side pneumatic filter regeneration Including suction nozzle d = 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on/off switch, potential-free contact for machine monitoring and automatic start/stop function, motor protection switch, airflow monitoring / differential pressure indicator, 3 mobile dust bins with inserted chip bags and clamping brackets, robust filter module made of galvanized sheet steel with automatic extinguishing system. Technical data: Maximum airflow: 5,050 – 5,600 m³/h Fedpfx Aexvnnlsh Ujpp Nominal airflow: 3,532 m³/h Corresponding negative pressure: 2,500 / 2,960 Pa Suction side connection: d = 250 mm Mode of operation: continuous duty Power supply: three-phase current Power consumption: 5.5 kW / 9.8 A Filter area: 25.2 m² Filter cleaning: automatic, pneumatic Total chip collection volume: 480 liters Chip bags (PE): 600 x 600 x 1,100 mm Weight: approx. 1,100 kg Noise level according to EN 23744: 72 dB(A) L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: Compressed air standard coupling NW 7 approx. 6 bar, serviced and cleaned compressed air Extinguishing water connection 1" at 3 bar 1 x 32 A CEE socket Due to varying extraction volumes and differing chip/dust contents, the uniform filling of the bins cannot be guaranteed in every operating situation with this system. Dedusters of this series are suitable for the extraction of wood dust and similar types of dust, whereby an H3 residual dust content of 0.1 mg/m³ is reliably maintained. Availability: by arrangement Location: Frankfurt

Condition: used, Year of construction: 1998, Manufacturer: Altendorf Model: F45 Elmo 3 Year of manufacture: 1998 Equipment: - Electric scorer H+S F45 - RAPIDO scoring system - Automatic guard control - Digital speed display Fpodpjxvnnrefx Ah Usp - Digital angle stop display - Cutting width 1300 mm (CNC controlled) - Parallelogram guard device F45 - Table extension 800 mm - Digital tilt display - Digital cutting width display 1300 mm - CE compliant version - Cutting length 3400 mm - Anodized version - Automatic brake - Motor 5.5 kW Availability: approx. mid-April 2026 Storage location: Wetterau

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Equipment and technical data: Planing width: 410 mm Number of knives: 3 Tersa knives Max. thicknessing height: 240 mm Min. thicknessing height: 3 mm Chip removal: max. 7 mm Thickness table adjustment: mechanical Thickness display: mechanical Feed speed: 6/12 m/min Infeed roller: steel Fpedpfxjxvnn Eo Ah Usp Outfeed roller: steel Motor: 4 kW Extraction diameter: 120 mm Availability: approx. mid-April 2026 Storage location: Wetterau

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Condition: factory-refurbished by Osama Technologies Features and technical specifications: - Automatic gluing machine with two rollers - Working width: 1000 mm - Usable working thickness: 0-100 mm - Application rollers Ø 185 mm - Feed speed: 24 m/min - Working table height: 800 mm - Roller groove spacing: 2 mm - Motor power: 0.37 kW - Glue distribution tank made of painted sheet metal Fodpfswkbb Dsx Ah Uepp - Water tank made of galvanized sheet metal - CE marking - 400 V / 50 Hz / 3 phase Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1999 The machine will be completely factory-refurbished! Cutting length: 2600 mm Anodised version Format cuts: 2600 x 2600 mm Crosscutting to scale at the mitre fence: 2600 mm Cutting width: 1000 mm Tiltable up to 45° Digital display for tilt angle Motor: 5.5 kW Speed: 4200 rpm Saw spindle: 30 mm Tool diameter: 300 mm Cutting height, vertical: 0-75 mm Cutting height at 45°: 0-53 mm Table extension: 840 mm With DUPLEX double mitre fence Weight: approx. 880 kg Fpodpfxsxvnmuj Ah Uop Pictures show the machine in unrestored condition! Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Achieving optimal work results starts with precise, consistent processes, accurate working methods, and reduced error tolerance. The outcome is quality down to the last detail – and our processing machines are designed to meet your standards of professionalism. That's why we've developed a drilling and fitting insertion machine that makes operation and setup even easier – MINIPRESS top. New features enable fast and precise handling and improve your workflow for greater accuracy, efficiency, and quality. In combination with EASYSTICK, MINIPRESS top is your complete processing solution for all drilling operations on carcasses, doors, and fronts. EASYSTICK is the automated and easy-to-adjust fence system for drilling and fitting insertion machines. Your entire process is optimized, from quick and simple machine setup to perfect results: Drilling positions are digitally determined, the fences adjust automatically, and guide you step-by-step to the correct locations: place the panel, drill, done! Equipped with EASYSTICK, planning and processing on the MINIPRESS top is digitized. You either plan directly on the machine or import your planning data from the cabinet configurator – quickly and easily via Wi-Fi or USB stick. The imported production data can be accessed directly and further processed. The EASYSTICK computer also allows you to make processing settings directly on MINIPRESS top. Enter casework and front panel dimensions, select fittings: EASYSTICK automatically determines the drilling positions for you. Thanks to EASYSTICK, MINIPRESS top automatically moves to the required fence positions. The drilling carriage moves along the Y-axis automatically, while the worktable and ruler remain in the same position – easy to set up and precise. MINIPRESS top allows for a throat depth of up to 350 mm by adjusting the drilling carriage. This, for example, allows you to drill centered rows of holes for large cabinet depths. Fjdpfxexvnm Uj Ah Uepp With MINIPRESS top, you only need one machine for all vertical and horizontal drilling operations. With the horizontal drilling unit of MINIPRESS top, you can accurately perform construction drilling, e.g., for dowels and connectors. The horizontal drilling unit is easily accessible and simple to adjust and operate. • with 9-spindle row drilling head, 32 mm pitch, with positioning pin • with horizontal drilling head (3 spindles) • with gearbox for furniture hinges (3 spindles) • with gearbox for straight mounting plates for cabinet connectors (2 spindles) • with gearbox for cabinet rails/front fittings (8 spindles) • with extraction kit, 125 mm Availability: approx. mid-April 2026 Location: Wetterau

Condition: used, Year of construction: 2013, Used machine Fjdpfx Ajxvnn Sjh Ujpp Year of manufacture: 2013 Veneer unit and feed console – quick conversion between veneer sanding and solid wood sanding. • Large sanding belt – 2600 x 200 mm. • Electromechanical oscillation – maintenance-free, separate oscillation motor. • Auxiliary table with contour sanding attachment – included in the standard scope of delivery. Height-adjustable idle disc table with adapter for dust extraction for sanding at the belt tensioning roller. Additionally equipped with a sanding arbor. Supplied with rubber rollers and sanding sleeves Ø 30, 40, 50, and 60 mm. • Digital display – for precise adjustment of sanding unit inclination. • Torsionally rigid, heavy machine stand made of solid steel – high running smoothness and stability (machine weight: 405 kg). • Large, heavy worktable with sliding coating – very smooth operation, easy height adjustment with handwheel, additional adjustment towards or away from the sanding belt, table size 935 x 460 mm. • Sanding unit tiltable by handwheel – from -10° to 90°, easy and precise thanks to a digital angle display. • Exact angular precision – sanding unit with mechanical locking. • Large mitre stop – with stepless angle adjustment and sliding ruler. • Adapter for dust extraction – on both sides: 1x at the idle disc table, 1x each at the right and left extraction hood, each Ø 100 mm. • 2 x 400V sockets on machine stand – one for machine connection and one for feed unit (included in delivery). • Cutout in the machine stand for pallet truck – facilitates easy in-plant transport and repositioning of the machine. Belt dimensions: 2600 x 200 mm Worktable: 935 x 460 mm Auxiliary table at belt tensioning roller: 350 x 350 mm Sanding arbor with rubber rollers Oscillation (can be switched on/off) Table height adjustment by handwheel Sanding unit tiltable -10° to 90° via handwheel Digital display for sanding belt inclination Motor: 2.2 kW Belt speed: 15 m/sec Feed console with 3-roller feed unit with veneer attachment Extraction: 2 x 100 mm External dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: approx. mid-April 2026 Location: Wetterau

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Fjdpfx Ahjxvnpcj Uepp - Cutting length: 5,300 mm - Cutting height: vertical 2,150 mm, horizontal 2,100 mm - Maximum cutting depth: 60 mm - Saw blade diameter: 250 mm; bore: 30 mm - Motor: 4 kW - Speed: 5,100 rpm - Material support with rollers - Fixed support elements for stable positioning of workpieces - Central support: robust support elements at working height, can be folded out individually by hand - Measurement readouts for: - Horizontal saw cuts via scale - Horizontal saw cuts via strip stop from 50–500 mm - Vertical saw cuts via stop from 0–1,300 mm - Compressed air connection for pneumatically retractable slatted frame (required air pressure: 6 bar) - Scoring system: achieved by double cut of the main saw blade. The plunge depth of the saw blade is limited by simply repositioning a stop, allowing the blade to score the workpiece along the feed direction. Availability: Approx. end of January 2026 Location: Hesse

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Equipment and Technical Data: Dimensions and Weights Product length approx.: 1170 mm Net weight approx.: 660 kg Product width/depth approx.: 1003 mm Connection for extraction Extraction port diameter thickness: 150 mm Installation Information Required space length: 1170 mm Machine body width/depth: 705 mm Required space width/depth: 1003 mm Working area length: 1000 mm Fedpfskwg Unex Ah Uepp Required space height: 1197 mm Working area width/depth: 2000 mm Note on required space: The specified dimensions consider the maximum travel paths or the usable area of the working range. Please add the stated dimensions to the required space to determine the recommended free installation area for the machine. Machine body length: 1170 mm Thickness planing Thickness table length: 520 mm Max. working height (thickness): 250 mm Thickness table width: 1000 mm Min. working length (thickness): 210 mm Min. working height (thickness): 3.5 mm Max. chip removal (thickness): 8 mm Electrical Data Main drive motor power: 7.5 kW Mains frequency: 50 Hz Connection voltage: 400 V Cutterhead type: TERSA Cutterhead speed: 4500 rpm Cutterhead diameter: 120 mm Max. planing width: 520 mm Number of planer knives: 4 pcs. Feed speed: 5/8/12/18 m/min Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 1996, Used system Year of manufacture: 1996 Fedjxvnm Ispfx Ah Uepp Berkmann systems operate on the principle of displacement flow, meaning a negative pressure is created on one side of the room wall, while positive pressure is generated on the other side by the supply air system. As a result, nearly the entire room air flows directionally and with minimal turbulence from the supply air side toward the exhaust air side. Paint mist generated within the airflow area is captured and extracted. With Berkmann extraction systems, extraction takes place across the entire area, unlike conventional systems which only extract in the intake area of the spray wall. This enables the coating of larger components. Additionally, it is not necessary to work directly in front of the extraction device. Thanks to the patented 'gap extraction' method, high gap extraction speeds are achieved on all sides (including the floor area, where solvents accumulate). Due to its special configuration, extremely large filter surfaces could be installed, resulting in exceptionally long filter service lives. Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. Includes: - Paint mist extraction unit - Supply air system - Solvent evaporation unit System is installed below floor level with grating cover Grating dimensions: approx. 3500 x 3400 mm Filter area of the device: approx. 3.7 m² Supply air system: approx. 82 kW Solvent evaporation unit: approx. 3,000 m³/h exhaust air volume Motor: 1.1 kW Equipped with supply air ceiling with explosion-proof lamps Used Kremlin paint spraying unit included Note: This system will be in operation until approx. mid-April 2026 and must then be dismantled. Price includes disassembly, removal, and on-site pickup. Location: Wetterau

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Condition: Function tested Machine was regularly serviced Features and technical data: Jointing unit Glue application system – glue pot with roller Cross-cut saw End trimming shears Pressure zone Extendable workpiece support Quick-heating glue pot Combination milling unit Special equipment: Surface scraper Chassis Availability: approx. mid-April 2026 Fpsdpfx Asxvnmzeh Ujp Storage location: Wetterau