Amada Guillotine 3050 x 12 mm
AMADA PROMECAM
GS-II 1230
Amada Guillotine 3050 x 12 mm
AMADA PROMECAM
GS-II 1230
Year of construction
2015
Condition
Used
Location
Transito 21, 6909 DA Babberich, NL
MACHINE DATA
- Machine type:
- Amada Guillotine 3050 x 12 mm
- Manufacturer:
- AMADA PROMECAM
- Model:
- GS-II 1230
- Year of construction:
- 2015
- Condition:
- good (used)
PRICE & LOCATION
LISTING DETAILS
- Listing ID:
- A9479000
- Reference number:
- 7607
- Update:
- 01.06.2023
DESCRIPTION
Make: AMADA
Type: GS-2 1230
Control: AMADA TOUCH
Year: 2015
High performance, accurate and reliable shearing from AMADA
It is crucial that the flow of blanks, the starting point for the entire manufacturing process, is managed with utmost quality and speed. These two criteria are entrenched in the design and manufacture of AMADA’s GS-II and GX-II sheet metal shears.
The rigidity of the frame, as well as the drive and adjustment solutions, ensure an exceptional degree of reliability and safety of use.
Beyond the technical considerations, these machines were developed with an improvement in working conditions, safety and ergonomics features in mind.
Specifications
Metric US Standard
Maximum sheet thickness
12 mm
Max. cutting length
3050 mm
Cwgycnpx0y
Strokes on full length
22 mm
Strokes in short 1000 length
29
Cutting angle
0,40 - 2,50 °
Length backgauge
0 - 1000 mm
Number of down holders
16
Approach speed
100 mm/sec.
Dimensions (Estimate)
Length
3900 mm
Width
2390 mm
Height
2040 mm
Weight
8800 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Type: GS-2 1230
Control: AMADA TOUCH
Year: 2015
High performance, accurate and reliable shearing from AMADA
It is crucial that the flow of blanks, the starting point for the entire manufacturing process, is managed with utmost quality and speed. These two criteria are entrenched in the design and manufacture of AMADA’s GS-II and GX-II sheet metal shears.
The rigidity of the frame, as well as the drive and adjustment solutions, ensure an exceptional degree of reliability and safety of use.
Beyond the technical considerations, these machines were developed with an improvement in working conditions, safety and ergonomics features in mind.
Specifications
Metric US Standard
Maximum sheet thickness
12 mm
Max. cutting length
3050 mm
Cwgycnpx0y
Strokes on full length
22 mm
Strokes in short 1000 length
29
Cutting angle
0,40 - 2,50 °
Length backgauge
0 - 1000 mm
Number of down holders
16
Approach speed
100 mm/sec.
Dimensions (Estimate)
Length
3900 mm
Width
2390 mm
Height
2040 mm
Weight
8800 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
SELLER
Mach4Metal
Contact person: Herr Mach4Metal Mach4Metal
Transito 21
6909 DA Babberich, Netherlands

Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Über uns
Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Geschichte
Mach4Metal wurde 1992 als Handelsunternehmen für gebrauchte Metallbearbeitungsmaschinen gegründet. Im Laufe der Jahre hat sich das Unternehmen zu einem weltweit führenden Unternehmen für gebrauchte Metallbearbeitungsmaschinen und verwandten Kategorien entwickelt. Wir sind ein angesehenes Mitglied zahlreicher Gewerkschaften weltweit.
Ruf
Derzeit verkaufen wir mehr als 500 Maschinen pro Jahr. Gewährleistet wird dies durch mehr als 6.000 unserer zufriedenen Kunden. Wir erhalten viele positive Google-Bewertungen und sorgen dafür das unser guter Ruf weiter bestehen bleibt.
Lage
Mach4Metal liegt zentral in Babberich, Niederlande, Europa, nahe der deutschen Grenze. Flughäfen, Bahnhöfe und Autobahnen befindet sich alles in unserer Nähe. Schauen Sie für nähere Informationen auf unsere Seite mit den Reiseinformationen.
Maschinen Bestand
Wenn Sie nach einer gebrauchten Metallbearbeitungsmaschine suchen, können Sie aus unserem täglich wechselnden Lagerbestand von mehr als 250 gebrauchten Qualitäts Maschinen wählen.
Bei uns finden Sie die besten Marken von CNC-gesteuerten Maschinen und conventionellen, die Ihnen von unseren eigenen Mitarbeitern vorgeführt werden können.
Dienstleistungen
Wir bieten Ihnen eine Gesamtlösung:
Bei Bedarf organisieren wir die Demontage, den richtigen Transport, und liefern die Maschine an den endgültigen Bestimmungsort. Wir kümmern uns dabei auch um Exportpapiere, Zollformalitäten, Versicherungen, CMR und andere notwendige Papiere.
Einkauf
Wir sind ständig am Kauf gebrauchter Maschinen und ähnlichen Produkten interessiert. Wir bieten Ihnen einen attraktiven wettbewerbsfähigen Preis und zahlen im Voraus per Banküberweisung. Darüber hinaus kümmern wir uns um die Demontage und den Transport von jedem Ort aus wo Sie die Maschine auch befindet.
Lagerhäuser
Unser Bestand ist in 7 Hallen mit einer Gesamtfläche von 40.000 m2 gelagert. Die Brückenkrane haben eine Tragfähigkeit von bis zu 85 Tonnen. Hier werden die Maschinen zum Verkauf vorbereitet und gegebenenfalls repariert.
Beratung
Mit unserem Wissen und unserer jahrelangen Erfahrung helfen wir Ihnen gerne mit kompetenter Beratung beim Kauf einer gebrauchten Maschine oder anderen Angelegenheiten. Wir freuen uns, Sie als einen unserer weltweiten Kunden begrüßen zu dürfen!
Über uns
Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Geschichte
Mach4Metal wurde 1992 als Handelsunternehmen für gebrauchte Metallbearbeitungsmaschinen gegründet. Im Laufe der Jahre hat sich das Unternehmen zu einem weltweit führenden Unternehmen für gebrauchte Metallbearbeitungsmaschinen und verwandten Kategorien entwickelt. Wir sind ein angesehenes Mitglied zahlreicher Gewerkschaften weltweit.
Ruf
Derzeit verkaufen wir mehr als 500 Maschinen pro Jahr. Gewährleistet wird dies durch mehr als 6.000 unserer zufriedenen Kunden. Wir erhalten viele positive Google-Bewertungen und sorgen dafür das unser guter Ruf weiter bestehen bleibt.
Lage
Mach4Metal liegt zentral in Babberich, Niederlande, Europa, nahe der deutschen Grenze. Flughäfen, Bahnhöfe und Autobahnen befindet sich alles in unserer Nähe. Schauen Sie für nähere Informationen auf unsere Seite mit den Reiseinformationen.
Maschinen Bestand
Wenn Sie nach einer gebrauchten Metallbearbeitungsmaschine suchen, können Sie aus unserem täglich wechselnden Lagerbestand von mehr als 250 gebrauchten Qualitäts Maschinen wählen.
Bei uns finden Sie die besten Marken von CNC-gesteuerten Maschinen und conventionellen, die Ihnen von unseren eigenen Mitarbeitern vorgeführt werden können.
Dienstleistungen
Wir bieten Ihnen eine Gesamtlösung:
Bei Bedarf organisieren wir die Demontage, den richtigen Transport, und liefern die Maschine an den endgültigen Bestimmungsort. Wir kümmern uns dabei auch um Exportpapiere, Zollformalitäten, Versicherungen, CMR und andere notwendige Papiere.
Einkauf
Wir sind ständig am Kauf gebrauchter Maschinen und ähnlichen Produkten interessiert. Wir bieten Ihnen einen attraktiven wettbewerbsfähigen Preis und zahlen im Voraus per Banküberweisung. Darüber hinaus kümmern wir uns um die Demontage und den Transport von jedem Ort aus wo Sie die Maschine auch befindet.
Lagerhäuser
Unser Bestand ist in 7 Hallen mit einer Gesamtfläche von 40.000 m2 gelagert. Die Brückenkrane haben eine Tragfähigkeit von bis zu 85 Tonnen. Hier werden die Maschinen zum Verkauf vorbereitet und gegebenenfalls repariert.
Beratung
Mit unserem Wissen und unserer jahrelangen Erfahrung helfen wir Ihnen gerne mit kompetenter Beratung beim Kauf einer gebrauchten Maschine oder anderen Angelegenheiten. Wir freuen uns, Sie als einen unserer weltweiten Kunden begrüßen zu dürfen!
Weitere rechtliche Angaben
Article 1 Definitions
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
Send inquiry
TELEPHONE & FAX
These listings may also fit your interest.
Listing
5

8608 km
AMADA PROMECAM Apelio II 245
1992
good (used)
Listing
6

7072 km
AMADA PROMECAM GS 630
2003
excellent (used)
Listing
3

7151 km
AMADA PROMECAM GSII 1230
2008
excellent (used)
Listing
6

8286 km
AMADA PROMECAM FO-3015 NT II, AF4000i-B
2012
excellent (used)
Listing
5

7427 km
AMADA PROMECAM GS1230
excellent (used)
Listing
4

8223 km
AMADA PROMECAM LC 1212 ALFA 1500 WATT
1995
excellent (used)
Listing
10

8125 km
AMADA PROMECAM Alpha Laser 2415 III
2003
used
Listing
3

8079 km
AMADA PROMECAM LC2415 ALFA III + LKI250 + Auto Magazine
2003
excellent (used)
Listing
8

7123 km
AMADA PROMECAM HFE 100-3L long stroke
2003
refurbished (used)
Listing
1

7070 km
AMADA PROMECAM TOGU-III
used
Listing
15

9614 km
AMADA PROMECAM AMADA APELIO III AP-2510V
1999
not inspected (used)
Listing
8

8223 km
AMADA PROMECAM L III 250 PR-3 UL 250
2007
good (used)
Listing
10

8328 km
AMADA PROMECAM HFA 700 CII
2004
excellent (used)
Listing
6

7985 km
AMADA PROMECAM Europe 258
2001
used
Listing

8038 km
AMADA PROMECAM HFBO 220 - 40
1996
excellent (used)
Listing
15

8367 km
AMADA PROMECAM LC3015 X1 NT
2008
excellent (used)
Listing
5

7700 km
AMADA PROMECAM HA 250
1988
used
Listing
12

8351 km
AMADA PROMECAM APX100 30
1998
good (used)
Listing
13

8289 km
AMADA PROMECAM ITPS2 50-12
1996
ready for operation (used)
Listing
5

7899 km
AMADA PROMECAM OCTO-334
1985
ready for operation (used)
Listing
8

7236 km
AMADA PROMECAM HA 400
1982
good (used)
Listing
6

7913 km
AMADA PROMECAM GH 540
excellent (used)
Listing
7

7854 km
AMADA PROMECAM ITP 2 100-30
1987
good (used)
Listing
3

8351 km
AMADA PROMECAM Pega 30507
1997
good (used)
Listing
15

7514 km
AMADA PROMECAM Vipros 368 Queen
2004
ready for operation (used)
Listing
2

8154 km
AMADA PROMECAM VIPROS 367 INV 26171
1995
good (used)
Listing
2

7123 km
AMADA PROMECAM HFP 100-3 HIGH SPEED MODEL
2006
like new (used)
Listing

8376 km
AMADA PROMECAM LC2415 A4 NT
2007
used
Listing
11

7854 km
AMADA PROMECAM HFE 130-3
2004
good (used)
Listing

8351 km
AMADA PROMECAM Aries-245
1988
good (used)
Listing
6

7870 km
AMADA PROMECAM Europe 258
2004
ready for operation (used)
Listing
5

7998 km
AMADA PROMECAM HA250-W
2023
new
Listing
7

7123 km
AMADA PROMECAM PEGA 357
1988
excellent (used)
Listing

7560 km
AMADA PROMECAM ITS-080-25, 80t 2500mm
1990
used
Listing
9

7854 km
AMADA PROMECAM ITPS 100-30
1991
good (used)
Listing

8351 km
AMADA PROMECAM VIPROS 367
1995
good (used)
Listing
7

8275 km
AMADA PROMECAM Europe 255
2003
ready for operation (used)
Listing
6

7985 km
AMADA PROMECAM FOL 3015 NT
2005
used
Listing
10

7617 km
AMADA PROMECAM HFE 80-25
2001
used
Listing
2

7478 km
AMADA PROMECAM Promecam GPX 3100 x 6 mm CNC
used
Listing
5

7072 km
AMADA PROMECAM TP 150
2000
good (used)
Listing
3

7810 km
AMADA PROMECAM SGLB
new
Listing
6

8243 km
AMADA PROMECAM LCG 3015
2015
ready for operation (used)
Listing

7985 km
AMADA PROMECAM FO 4020 NT
2006
used
Listing
3

7988 km
AMADA PROMECAM FBD-8025F
1990
used
Listing
10

8243 km
AMADA PROMECAM APX 100 30
1998
ready for operation (used)
Listing
9

7870 km
AMADA PROMECAM FO M2 3015 RI
2015
ready for operation (used)
Listing
15

7514 km
AMADA PROMECAM LC3015 F1 NT
2013
ready for operation (used)
Listing
7

7870 km
AMADA PROMECAM EMK 3610NT
2008
ready for operation (used)
Listing
7

9216 km
AMADA PROMECAM HFBO 80-25
1996
ready for operation (used)
Your listing has been deleted successfully
An error has occurred