Commercial vehicle

Blomenrohr 553/7500 Tandemtieflader

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each Dodjrgzv Nopfx Afxowb * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, Year of construction: 1978, operating hours: 9,125 h, 1978 | Hanomag MF 33C Massey Ferguson / for parts only | Used Wheel Loader | 9125 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 5 inspection points 5 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Only for parts recovery, not complete. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40580 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Dedpfxey Iy N Uo Afxjwb ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2024, SCHORR ride-on sweeper Electric sweeper Street sweeper Floor sweeper Powerful and smooth-running sweeper for indoor and outdoor use. With switchable spray nozzle. The ride-on sweeper offers a convenient and efficient solution for floor cleaning. The ergonomic seat and intuitive controls enable effortless operation, even over long periods of time. The powerful motor ensures thorough cleaning even in demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of convenience and efficiency makes floor cleaning a stress-free and enjoyable task. The LED work lights fitted as standard make it easier to work in darker areas. With an output of 1920 watts from 48V, the sweeper is equipped with enough power to get you comfortably to over 4 hours of continuous use. SCHORR RR80KM ride-on sweeper - Discover the advantages: -- Fully electric ride-on sweeper with 1250mm working width - ideal for large indoor and outdoor areas -- 48V/1920W power Dwedpfx Ajuac D Uofxsb -- 80 liter bagless rear collection container, easy to extend and empty -- Powerful system with 48V and 58Ah -- With switchable spray nozzle for less dust turbulence -- Extremely easy to operate -- Outstanding maneuverability Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR80KM Drive: Seat Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tires: PU (non-slip) Own weight: 400kg Basic dimensions Collecting tank volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Total length: 1600mm Total height: 1300mm Total width: 1250mm Sweeper width (without brush): approx. 80cm *Further technical data available on request. The chassis is made of flexible and robust plastic all round, which reduces potential damage to walls, for example. Apart from the side bristles, nothing protrudes beyond the cladding so that work can be carried out as closely as possible to objects. The collection container is made of sturdy steel and can be easily removed from the rear of the machine. Sensitive components such as the headlights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min - 28PS. Dodpfx Afev Nrf Eexewb - Very good condition.

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 Djdpfsu Idfrox Afxswb total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: like new (used), Flooring / Stage flooring / Chipboard NEW Like new, see pictures. Chipboard, Type: A SF TYPE P6 38mm according to DIN EN312 Top side uncoated, bottom side white coated, grooved as required, cut to size according to DIN EN324 Negotiable price: from € 32,-- net per m² ex warehouse The following quantities & dimensions are available: +200 pcs. Length 2,295 mm x Width 1000 mm + 60 pcs. Length 2,460 mm x Width 1000 mm + 70 pcs. Length 2,520 mm x Width 1000 mm + 60 pcs. Length 2,580 mm x Width 1000 mm + 80 pcs. Length 3,410 mm x Width 1000 mm Please note: only complete panels are sold, cutting is not possible! Goods are in stock. Transport possible upon request. Inspection possible at any time by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty shelving used & new Description: Dodpfx Aod E Izzjfxowb Are you looking for high-quality warehouse shelving to buy? With around 100 of its own employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racks or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Conducting auctions on behalf of customers. Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Dwsdpsqx Sz Dsfx Afxjb

Condition: good (used), functionality: fully functional, power: 64.72 kW (87.99 HP), fuel type: diesel, color: yellow, drive condition: 90 %, number of seats: 1, Year of construction: 1998, machine/vehicle number: 3YS00993, Equipment: cabin, hydraulics, Product Description Used mini Excavator machinery Manufactured by caterpillar Model 308BSR excavator Operates on Diesel Engine Dodpfeum D R Dsx Afxowb Machine sold as its condition More information please contact VIJAY JPN Industrial Trading Pte ltd 13A pandan crescent, Singapore 128478

Condition: used, machine/vehicle number: 15355, Year of construction: 2008, operating hours: 15,561 h, load capacity: 12,000 kg, lifting height: 5,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,280 mm, Equipment: cabin, .: 15355 Device details: Year of manufacture: 2008 Load capacity: 12,000 kg Lifting height: 5,500 mm Read operating hours: 15,561 h Mast type: Standard Mast height: 4,280 mm Length/Width/Height: 4,600 / 2,500 / 3,000 mm Operating weight: 15,820 kg ---- Equipment: * Protective roof * 3rd valve * 4th valve * Full cabin * Heating * Front work lights * Rear work lights ---- Further device information: Without fork carrier Rotating beacon Radio Single pedal ---- Operating hours are generally displayed hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English Dwsdpfxstw Dfwo Afxeb Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information provided without guarantee, errors and changes reserved.

Condition: good (used), functionality: fully functional, DGUV certified until: 08/2027, Bakery refrigerator, Liebherr BKPv 6570 Stainless steel design For trays measuring 600 x 400 Digital temperature display Adjustable temperature range from -5 to 15°C DGUV V3 tested – available only from us Connection: 230V Used equipment Visit our large showroom! Dedpfxeyhzlme Afxowb