BOGE DS 95 9.5m3/min refrigerant dehumidifier

BOGE DS 95

Condition: excellent (used), Year of construction: 2017, operating hours: 5,800 h, functionality: fully functional, cooling capacity: 160 kW (217.54 HP), type of cooling: air, power: 260 kW (353.50 HP), heating capacity: 160 kW (217.54 HP), aircooled Multipipe Chiller Trane CMAB HSE 185 cooling and heating in the same time Cooling cap.160 KW (47 refr.tons), Heating 160KW (47 refr.tons) 2 circuits with 4 scroll compressors,inverter driven Todpfxowy Dn Sj Adwsc Plate evaporator, with integrated 2 pumps R 410a, low hours tested,ready for operation

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg Tedpfx Adsyx Uy Aowoc • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Used automatic shot blasting machine from KF Strahltechnik for sale. The machine is designed for the automatic shot blasting of profiles, sheet metal, and steel structures. The four blast wheels/turbines make the machine suitable for efficient processing of the top and bottom surfaces of workpieces. The machine is in good condition and is currently in operation. An inspection and test run at our facility are possible by arrangement. Technical data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting machine Number of turbines: 4 Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel structures, and similar workpieces Processing: Shot blasting of the top and bottom surfaces Roller conveyor at the front: approx. 6 m Roller conveyor at the rear: approx. 6 m Condition: Good, currently in operation Inspection: Possible at the facility Tsdpfxekw Ukue Adwsc Test run: Possible by arrangement Delivery and sales conditions The stated price is the ex-works price for direct collection. Dismantling, loading, transport, and installation/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. An inspection and examination before purchase is expressly possible. ✅ Automatic shot blasting machine from KF Strahltechnik ✅ 4 turbines/blast wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm ✅ Roller conveyors at the front and rear, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test run possible at the facility ✅ Price ex-works, dismantling and installation optionally available at an extra charge

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5077883, overall weight: 2,200 kg, pressure (max.): 10 bar, Equipment: type plate available, BOGE SLF101-3 Compressor, No. 5077883 MANUFACTURER: BOGE TYPE: SLF101-1 Serial No.: 5077883 Year: 2014 Power (kW): 90 Capacity (m3/min): 4.94-12.25 Pressure (bar): 10 Operating hours (doc./total): Frequency inverter: yes Built-in dryer: no Heat exchanger: no Cooling (air/water): air Tedpfx Ajw R A Ansdwoc On tank: no Documentation: no Condition: used

Condition: good (used), Year of construction: 2002, Boge S61-2 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Tedpfxjxdhlgo Adwec Discharge pressure: 10,00 bar Motor power: 45.00 kW Free air delivery: 6,10 m³/min

Condition: like new (used), Year of construction: 2022, overall weight: 250 kg, BOGE DS 350 refrigerant air dryer Tedpfxsxcb Edo Adwsc

Year of construction: 2009, condition: used, Palletiser Solema Cartesio Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot Tjdpfx Ajvc Ucgedwoc - Pallet dispenser - Slip sheet feeder - Pallet transport system

Condition: excellent (used), functionality: fully functional, Chiller - Emerson Network Power chilled water unit Brand Emerson Network Power Cooling capacity 1300 kW Tsdowplwgepfx Adwec Dimensions 13.5×2.50×2.40 m The device is characterized by high cooling capacity, which allows it to be used in demanding environments where reliable heat dissipation is necessary.

Condition: used, Year of construction: 1992, Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200Year 1992 - Serial-No. H-200 2 Feeder for CMC Inserting Machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Tjdeh Ax Snjpfx Adwsc Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2007, Palletiser Solema Cartesio Year: 2007 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser Todevcmxyepfx Adwoc - Slip sheet feeder - Pallet transport system