Edge banding machine Brandt KDF 230 C

Brandt KDF 220 C

2010

good (used)

Call

- feed rate (m/min.): 10 - jointing unit - edge banding - strip magazine 32ulrbjvpa - crosscut saw unit - flush, radius and chamfering station - corner copying unit - scraper unit - execution: right-hand machine - machine length (mm): 4150

Listing

Bozen

8234 km

Brandt KDF 430 C

2009

ready for operation (used)

€25,000

Call

BRANDT EDGE BANDING MACHINE KDF 430 C E0eyjwmif - YEAR OF CONSTRUCTION 2009 - FLEETING AGGREGATE - INFEED RULER MAN. ADJUSTABLE - CROSSCUT UNIT WITH PN. SWIVELING - MILLING UNIT WITH PN. SWIVELING AND EL. ADJUSTMENT OF LATERAL TRACING - COPYING UNIT 1 SPINDLE - RADIUS SCRAPER - SURFACE SCRAPER - BUFFING UNIT - SCREEN CONTROL - AUTOM. EDGE MAGAZINE FOR ROLLED EDGES AND SOLID EDGES UP TO 8 MM - WORKPIECE THICKNESS 8-60 MM

Listing

Toruń

8181 km

Single side edgebander

Brandt KDF 440 C

2014

excellent (used)

Call

Single side edgebander BRANDT KDF 440 C. Full numerical control ! EQUIPMENT Pre-milling unit Corner rounding unit with 2 motors Edge scraper unit Glue scraper unit NC control milling unit Gluing unit with glue hopper End cutting unit with 2 motors Milling unit straight/radius Buffing unit Edge coil holder Control: BRANDT POWER CONTROL PC 20+ C0tywj8m3t Grubość doklejki max 8 mm Grubość doklejki w rolce max 3 mm Posuw max 11 m/min Wysokość doklejki max w 65 mm Szerokość materiału min 70 mm

Listing

Seregélyes

8615 km

Brandt KDF 650 C

Brandt Kantentechnik GmbH KDF 650 C

2010

like new (used)

€15,900

Call

Brandt edge sealing machine for sale in excellent condition. Operational, can be put to work straight away. Top roller bushing-restored along the entire length of the machine. The machine can be switched on and tested on site. Further information on request. Machine data: 8-18 m/min feed rate Maximum feed rate with form cutter 14 m/min Total length approx. 5760 mm Workpiece width: 70 mm 70 mm For 23-40 mm thick workpiece 120 mm For 41-60 mm thick workpieces 150 mm depending on the length of ...

Listing

Pollenzo

(dealership location)

8138 km

BRANDT KDF 440 C

used

Call

Premilling Unit: yes Bs3vuyei Corner Rounding Unit: yes Max feed speed: 11 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Listing

Saerbeck

7646 km

Brandt KDF 430 C, Ambition 1430

2016

excellent (used)

€33,500

Call

Edge banding machine Manufacturer: Brandt Type: KDF 430 C, Ambition 1430 Year of manufacture: 2016 Operating hours: approx. 1.705 h Running meter: approx.: 136,000 m edge thickness: 0,4 - 8 mm workpiece thickness: 8 - 60 mm feed rate: 11 m/min power: 12 kW total length: 4.773 mm 3h7ac Weight: approx. 1.600 kg Second glue pot included Joining unit: Yes Heating unit: Yes Cross-cutting unit: Yes Flush trimming unit: Yes Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes

Listing

Priekulė

8127 km

Edgebanding machine

Brandt KDF 660 C

2003

good (used)

€8,000

Brandt O KDF 650 C edge gluing machine

Call

Edging machine BRANDT OPTIMAT KDF 660 C; Used edging machines for sale. The machine is connected and used in production. Joint trimming unit 2x2.2kw Clipping unit EVA Glue Application Unit. There is one spare EVA tank, cleaned and with replaced heating elements. Reactivation unit (Infra red radiator ELSTEIN IRS / 2 300) Pressure zone Ccxhqmil7c End trimming unit Trimming Unit Profil trimming unit youtube.com/shorts/4N9P13lz-wA?feature=share

Listing

Tacenska cesta 25, 1210 Ljubljana - Šentvid, Slovenija

8448 km

Brandt O KDF 650 C

2003

excellent (used)

€16,800

EXW Fixed price plus VAT

Call

Brandt O KDF 650 C edge gluing machine Cg0mbvfe8k PREMIUM TOTUS package included: 1. SERVICE - All machines are inspected, tested and serviced. We guarantee trouble-free machine operation. 2. ASSEMBLY, STARTUP AND TRAINING - All machines are assembled and ready for use. We organise training sessions for machine users. 3. POST PURCHASE ASSISTANCE - We offer professional assistance to our customers.

Listing

Brandt Kantentechnik GmbH Optimat KDF 650 C

Seregélyes

8615 km

Brandt OPTIMAT KDF 650 C

Brandt Kantentechnik GmbH Optimat KDF 650 C

2016

like new (used)

€25,500

Call

Brandt edge sealing machine for sale in excellent condition. Operational, can be put to work straight away. The machine can be switched on and tested on site. The edge sealing machine can be purchased with a Barbaric RTS 04 L reverser in excellent condition. Price for Brandt + Barbaric reverser in one: 35500 € Barbaric reverser price separately: 10.0000 € For more information please contact. 9ioyyi

Listing

United Kingdom

6838 km

BRANDT KDF 530 C

used

Call

Listing

Saerbeck

7646 km

Brandt KDF 350 C

2004

excellent (used)

€11,800

Call

Edge banding machine Manufacturer: Brandt Type: KDF 350 C Sx09ww Year of construction: 2004 Operating hours: approx. 1.150 h edge thickness: 0,4 - 3 mm workpiece thickness: 8 - 50 mm power: 10,5 kw feed rate: 11 m/min total length: 3.920 mm weight: approx. 1.250 kg Joining unit: Yes Cross-cutting unit: Yes Radii - flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Buffing unit: Yes

Listing

0 km

BRANDT KDF 1650 Highflex AT15

used

Call

Listing

Gerolzhofen

(dealership location)

7947 km

Brandt Typ MC 106-2 / S PN 269950 C

1995

used

€850

Kantenanleimmaschine mit Fügen

Call

form parts edge banderwith PU-glue unit Nordsontype MC 106-2 / S PN 269950 C2000 W - max. 6000 Wfor form parts with glue applicationusedmanufactured by Brandtbuilt in 1995CE tested for type examinationlocated in 97447 Gerolzhofensale in current condition as seen- free on truck - F7gptrk

Listing

Moneymore

6680 km

Edgebander

Brandt KDF 1440

2016

excellent (used)

Call

Feed Speed 8-14 m/min Total Length 5,573mm Workpiece Thickness: 8-60mm Edge Material Coil 0.4 – 3mm Edge Strip Material 0.4 – 8mm Pre-milling Unit 2 X 2.2Kw Gluing Unit A8 Workpiece Pre-Heating Quick melt Hot Melt Application Unit Pressure Zone with Motor Driven Adjustment 3xiikt0t8w End Trim Unit Chamfer / Straight 2X0.18Kw with pneumatic adjustment Multistage Trimming Unit MS 40 Pneumatic 2-point adjustment Contour Trimming Unit Pneumatic Adjustment 2 stops radius / chamfer Multistage Profi...

Listing

Nattheim

(dealership location)

8019 km

Brandt KDF 350

2006

used

Call

Vorfräser Verleimteil Kappaggregat Kombifräsaggregat Eckenkopieren Raduiusziehklingenaggregat Flachziehklinge Länge 3900 mm Cty3p8zuwn Lagerort: Nattheim

Listing

Wysoka Głogowska

8570 km

Brandt KDF 210

2009

good (used)

€15,000

Call

Listing

Saerbeck

7646 km

Brandt KDF 670

2006

excellent (used)

€20,000

Call

Edge banding machine Manufacturer: Brandt Type: KDF 670 Year of construction: 2006 Operating hours: approx. 672 h Max. workpiece thickness: 8 - 60 mm Max. edge thickness: 0,4 - 12 mm Power: 15 KW G0qn7jgaw Feed rate: 11/16 m/min length: 6.680 mm Weight: approx. 2.800 kg Joining unit: Yes Crosscut saw unit: Yes Radius flush milling unit: Yes Corner copying unit: Yes Radius scraper: Yes Surface scraper: Yes Buffing unit: Yes Spraying unit: Yes Height adjustment workpieces: electric

Listing

0 km

Edge banding machine BRANDT AMBITION1890

BRANDT KDF 1440C Ambition

used

Call

Listing

Gerolzhofen

7947 km

edge banding machine

Brandt KDF-790

2008

used

Call

bargain price! used, top condition, top equipment, little used Make Brandt Type KDF-790 Year of construction 2008 CE type tested Program control type Power-Control PC20+, renewed about 1 year ago Glue system granulate rapid heating basin + PU glue part Pre-melting container for granulate Quick change basin 1 piece for PU Edge thickness 0.4 -12/15 mm Workpiece height min. 8 mm max. 60 mm Feed infinitely variable from 8 - 20 m/min. Caps from the roll up to 3 x 45 mm / 0.8 x 65 mm Pre-assemble wit...

Listing

Moneymore

6680 km

edgebander

Brandt KDF 650 FC

2013

excellent (used)

Call

Feed Speed: 8-18m/min Max feed speed with contour trim: 14m/min Workpiece Thickness: 8-60mm Edge material Coil: 0.4-3mm Edge material strips: 0.4-12mm PU-Rollers Joint Trimming 2X2.2Kw Workpiece pre-heating Standard application unit Quick melt pre-melt unit End Trim Unit chamfer / straight Trimming Unit Contour Trimming Profile Scraping with quick change heads Glue joint scraping Buffing Unit Separating Agent Spray Device 3xifrgz3ny Detergent Spraying Unit Pnuematic Adjustment End Trim Chamfer...

Listing

Berlin

7968 km

Brandt KDF 890

2014

excellent (used)

Call

BRANDT SINGLE SIDED EDGE BANDING MACHINE AMBITION 1890 Type KDF 890 year 2014 for the processing of straight workpiece edges and for glueing and finishing of different edging materials in longitudinal and transverse pass. - Feed rate ¦ 8 - 20 m/min - working height ¦ 950 mm - Pneumatic connection ¦ min. 6 bar total length 7760 mm 2. WORKPIECE AND EDGE PARAMETERS: - Workpiece width min: - For workpiece thickness 8-22mm ¦ 70 mm*. - For workpiece thickness 23-40mm ¦ 120 mm* - For workpiece thicknes...

Listing

Schweiz

8020 km

Edge banding

Brandt Profiline KDF 690

2009

reconditioned (used)

Call

The machine was completely overhauled by Homag Switzerland - new chain plates, belt top pressure and all wear parts. Xn0ff9t Control: powerControl PC20+ CE-sign: available Total length 7760mm Feed rate: 8 -18m/min, infinitely variable Height adjustment: motorised Workpiece thickness: 8 - 60 mm Joining unit: (twin motor) Gluing unit: A12 (PUR hotmelt) - Preheating: available - Glue premelter Robatech - Infrared emitter Pressing zone: 1 driven prepress roller, 3 ...

Listing

Blučina

8364 km

Edgebander

Homag/Brandt Profiline KDF 890FSC (100mm)

2010

good (used)

€23,000

EXW Fixed price plus VAT

Call

Machine dimensions (LxWxH)...8,1x1,5x2,3m Edge thickness...0,4-12 mm Panel thickness...8-100 mm Panel width....min. 30 mm Variable feed speed..8-20 m/min. Weigh of the machine...3,9 t Aggregates: V-belt top pressure Spraying unit - separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable application unit made by Homag + 1 additional Quickmelt = pre-melter+glue magazine Pressure zone - 1+4 rollers End trimming unit Rough trimming unit Sypbt Trimming unit - ...

Listing

0 km

BRANDT KDF 1440C Ambition

used

Call

Listing

Grońsko

8095 km

Brandt KDF 350C

good (used)

€11,900

Call

BRANDT Veneer Machine pre-milling glue granulate tank, applied by roller pre-cut guillotine pressure rollers 2 dripping balls Top and bottom straight and radius cutters corner earning unit profile cyclin polisher max board thickness 50mm thickness of veneer from 0,4-3mm Good condition. Machine ready to work possibility of presentation. Compact dimensions length 400cm B2xxsjr8

Listing

Brandt PROFILINE KDF 650 /Modell Highflex 1650

Bayern, Deutschland

8087 km

Brandt PROFILINE KDF 650 /Modell Highflex 1650

2012

good (used)

€23,000

Brandt KDF 220 edge banding machine

Call

PROFILINE KDF 650 / Model Highflex 1650 BRANDT SINGLE SIDED EDGE BANDING MACHINE Feed rate 8-18 m/min feed max. with form cutter 14 m / min total length approx. 5760 mm Workpiece widths: with workpiece thickness 8-22 mm 70 mm with workpiece thickness 23-40 mm 120 mm with workpiece thickness 41-60 mm 150 mm depending on the workpiece length edge material roll 0,4-3 mm cross section for PVC 135 mm² cross section for veneer 100 mm ² roll diameter max. 830 mm edge material strip 0,4-15 mm ( or 12...

Listing

Sesto Calende

8116 km

Single edge bander

Brandt KDF 680

2009

used

Call

Numerical Control Power Control Pc 16 Panel height 8 - 50 mm Solid wood mm 8 Pvc / Abs mm 0,4 - 3 Feed speed up to mt / min 11 Adjustable working height Panel support guide Side roller conveyor with idle wheels for panel support Rectifier group Reel holder plate Gluing unit for EVA hot melt glue with glue pot with quick release system Edge pressure group on straight profiles with pressure rollers Header group Overlapping trimming unit with 2 motors Rounding unit with 2 motors Edge scraper group ...

Listing

Colmberg

7985 km

Brandt KDF 220

2011

used

€19,900

Call

Year of manufacture 2011 Good condition Joining , glueing , cutting , flush sawing , radii milling , corners rounding , scraper glue pool for PU possible Cdrzw7uhj3 Dimensions 440 x 135 cm Weight 1300 kg

Listing

Willroth

7740 km

Brandt KDF 880

2010

excellent (used)

Call

BRANDT KDF 880 / Edge banding machine - availability approx. July 2023 Cjoubej9ar - fully functional machine - fully equipped - up to 3mm roll material & up to 20mm edge banding - Without feedback device, only the edgebander is sold.

Listing

0 km

BRANDT KDN 220 C

used

Call

Listing

Grońsko

8095 km

Brandt KDF 130C

excellent (used)

Call

BRANDT Veneer Machine well equipped, possibility to check before buying pre-cutters application of glue with a roller pneumatic pre-application guillotine pressure rollers Oa8n98cn pre-cutting balls top and bottom milling unit R1 - R2 cornering unit cyclin flat cyclin max thickness of veneer from a roll 3mm feed rate 8m/min max glue height 45mm machine length 430cm

Listing

Saerbeck

7646 km

Edge banding machine FULL 20m/min

Brandt KDF 210

2009

excellent (used)

Call

Edge banding machine Manufacturer: Brandt Type: KDF 210 Year of manufacture: 2009 Jfgjlyh edge thickness: 04 - 3 mm workpiece thickness: 8 - 50 mm feed rate: 10 m/min power: 9 kW weight: approx. 1.100 kg Machine length: 3.780 mm Joining unit: Yes Crosscut saw unit: Yes Flush milling unit: Yes Radius scraper: Yes Surface scraper: Yes

Listing

Kežmarok

8564 km

Brandt Optimat KDF 770C

2004

excellent (used)

€20,000

Edge banding machine incl. feedback

Call

I sell the fully equipped edge banding machine BRANDT Optimat KDF 770 C, year 2004: Configuration: Swzagw Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Working thicknes...

Listing

Brandenburg an der Havel

7904 km

Brandt KDF 650 Edition

2011

excellent (used)

Call

Single-sided edge banding machine with workpiece feedback Bbsj0eme Brandt KDF 650 Edition Year of construction 2008 Ligmatech ZHR 01/R/055 Year of construction 2013 feed rate 8 - 18 m/min feed max. with form cutter 14 m/min edge thickness roll 0,4 - 3 mm edge thickness strip 0,4 - 15 mm Control system Power Control PC 20+ Aggregates jointing unit 2 x 2,2 KW Gluing unit A12 Quickmelt application unit JA Cross-cut unit 2 x 0,35 KW Pneumatic adjustment caps chamfer / straight Pneumatic 2-point ...

Listing

8629 km

BRANDT KDF 220

used

Call

Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 10 m/min Maximum panel thickness: 50 mm Cdbiijxkrk Operating Units: 7 nr

Listing

Grońsko

8095 km

Edge banding machine FULL 20m/min

Brandt Optimat KDF 440

excellent (used)

Call

BRANDT Veneer Machine well equipped, possibility to check before buying aggregates controlled from the desktop Smarttouch control screen anti PU misting device pre-FREZ glue application pneumatic pre-cut guillotine pressure rollers pre-cutting balls top and bottom milling unit R1 - R2 Chqp2efvrj cornering unit profile cyclin flat cyclone spray mist cleaning polisher machine from 2016 worked in a small plant with not much mileage

Listing

Kežmarok

8564 km

Brandt Profi Line KDF 790

2006

excellent (used)

Call

I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Dbvpt2lfm Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second s...

Listing

8629 km

Edge banding machine with boomerang retu

BRANDT KDF 660

used

Call

Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Cbksfzkg

Listing

Brandt + Ligmatech Optimat KDF 770C + ZHR01/R/065

Kežmarok

8564 km

Brandt + Ligmatech Optimat KDF 770C + ZHR01/R/065

2004

excellent (used)

€32,000

Call

I sell the fully equipped edge banding machine BRANDT Optimat KDF 770 C, with the LIGMATECH ZHR01/R/065 boomerang for material return. Year 2004: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scraper...

Listing

8629 km

BRANDT KDF 670

used

Call

Premilling Unit: yes Corner Rounding Unit: yes Xgbjk0k2 Max feed speed: 16 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Listing

United Kingdom

6838 km

BRANDT KDF 1230 Airtec Ambition

used

Call

Premilling Unit: yes Corner Rounding Unit: yes 2vfac Max feed speed: 8 m/min Maximum panel thickness: 40 mm

Listing

Szymbark

8562 km

Edgebander

Brandt KDF1230 Ambition

2013

excellent (used)

€19,500

Call

Edgebander in very good condition. It is possible to show the equipment in operation on site. Brandt 1230 Ambition edgebander Year of production: 2013 2hpzwmzh feed speed 11 mm min. Working thickness when longitudinal milling 8-50 mm Edge thickness in strips 0.4-3 mm showers Pre-milling unit Quick-change tank for glue granules Pressing unit Cutting unit - 2 pcs Up-down milling unit Accurate cutting, two motors with a power of 0.25 kW, 12000 rpm Edge milling unit with R2 profile cutters Corner r...

Listing

Tata

8559 km

industrial gasburner

Cuenod C 120 / 160 GX 507 230-1600 kw

2007

as good as new (ex-display)

€3,850

Call

new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 Dpi39rv GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level o...

Listing

Phoenix Contact MCR-FL-C-UI-UI-B-DCI-24/230

Wiefelstede

7607 km

Isolation amplifier

Phoenix Contact MCR-FL-C-UI-UI-B-DCI-24/230

used

€55

Call

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier R2zswxiu -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier -Type: MCR-FL-C-UI-UI-B-DCI-24/230 -Number: 11x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece

Listing

VW T6.1 FkStK O°C, 230 V Hecktüren PDC Radio (DAB+)

Haselünne

(dealership location)

7608 km

Refrigerated truck

VW T6.1 FkStK O°C, 230 V Hecktüren PDC Radio (DAB+)

used

€52,000

Listing

Phoenix Contact MCR-FL-C-UI-UI-DCI-24/230

Wiefelstede

7607 km

Isolation amplifier

Phoenix Contact MCR-FL-C-UI-UI-DCI-24/230

used

€55

Call

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, isolating amplifier -Manufacturer: Phoenix Contact, Conf. Isolation Amplifier Bobb8teqex -Type: MCR-FL-C-UI-UI-DCI-24/230 -Number: 2x relays available -Price: per piece -Dimensions: 100/15/H115 mm -Weight: 0.1 kg/piece

Listing

Nevers

(dealership location)

7693 km

Edgebanding machines

HOMAG Edgebander KDF 530 C

ready for operation (used)

€21,000

Call

Technical characteristics Feeding speed 11m/min Composition : Edge feeder in roll form Diamond calibration Edge introduction Cutter Gluing unit Snu7b Orientable end unit Trimming Scraper Angle copying Brush Programmable control with group indexing Compact machine - complete composition Minimum panel thickness: 8 mm Maximum panel thickness: 50mm Minimum band thickness: 0.4 mm Maximum band thickness: 8mm Power and Motors ...

Listing

Berlin

7944 km

Homag Optimat KDF 220 C

2019

excellent (used)

€26,500