Vacuum pump

Busch RA 302 D

Condition: refurbished (used), Busch vacuum pump RA302D, completely overhauled. 0.5 mbar, 300 cm³/h, 5.5 kW. 2 units available from stock. Dedpfewv Rc Iex Apwskr

Year of construction: 2024, condition: new, The FL-430 automatic labeling machine is ideally suited for fast and automated labeling of flat products. The friction feeder allows for easy and reliable separation of products with different thicknesses, dimensions, and materials. - LCD display - Standard speed of up to 30 m/min and a max. label width of 140 mm when used in combination with the 400 friction feeder Dksdpfxsickh Rj Apwsr - Extended version dispenses labels at a max. speed of up to 50 m/min and a max. width of up to 260 mm - Transparent labeling is possible

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 218 kg, total length: 962 mm, total width: 563 mm, total height: 420 mm, volume flow: 360 m³/h, power: 75 kW (101.97 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,720 rpm, warranty duration: 12 months, protection type (IP code): IP55, rotational speed (min.): 1,420 rpm, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300E Nominal flow: 300 m3 / h at 50Hz. Dkedpfx Ajftzv Uepwer End vacuum: 0,1 mbar abs. Motor power: 7,5 Kw Any clarification, do not hesitate to contact us.

Condition: used, Rotary vane vacuum pump Manufacturer: Busch Djdpfx Asdbbziepwskr Type: R5 RA 302 D Voltage: 50/60 Hz, 400 V Nominal pumping capacity: 300 m³/h Ultimate pressure: < 0.5 hPa (mbar) Condition: General overhaul Warranty: 12 months Includes: Motor relagering, new paint job, electrical inspection Delivery time: in stock

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Dodpfxeftzgxs Apwjkr Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Weights Empty weight: 1.800 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Dkedpsq Ixuvjfx Apwor Reference number: 2 Other information Fits to following machines: 20-35ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you new excavator mounted Pile driver- Pile Hammer, Vibro Pile hammer, Vibratory pile driver, Vibratory Hammer. This model AJCE AVH30 fits on excavator class 20-35 ton. You don't need Power Pack, that will save you money! The weight is 1800kg. It will be delivered together with special extention boom to connect on the excavator. You can see it on the photos. We have also Side Grip type vibrohammers available. Contact us for details. We can ship worldwide. - Vibrofonceur Vibrohammer Piledriver Vibro högförare battipalo возач гомиле conductor de pila pilot hromady cölöpverő Rammbock haugesjåfør bate estaca sonetă ciocan vibro martelo vibro vibrohammer martillo vibratorio vibro marteau Vibrationshammer čekić vibro młot wibracyjny vibro plaktukas вибромолот вибро чук

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. Dodjqt Dmyepfx Apwskr We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Dsdpfxjftzzge Apwskr Final vacuum: 0,1 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding Djdehqmamjpfx Apwokr • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Dedpfx Apocm Elnowokr