Y - Crane traverse with variable chains

CARL STAHL Y 7 T

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Tyre type front: Pneumatic Tyre size front: 400/70-24 Lodjw Eqddjpfx Akqehf Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light.

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage and drives for external storage of data and images. hard disk for internal image storage and drives for external storage of data and images. This makes it possible to quickly and easily gain insights into the composition and morphology of morphology of specimen surfaces far into the sub-micrometer range. With magnification range from 5x to 300,000x, both macrostructures and microstructures can be examined. Lhsdpfefcwwnox Akqef as well as microstructures is possible. The range of applications can be extended considerably by adding special accessories, allowing, for example analytical investigations in micro areas of the surface are possible. The device can be operated both via conventional switching elements and via the keyboard or mouse (add-on). or mouse (add-on). Electron optics and vacuum control are conventional. Functions of the Image memory functions are operated using the keyboard or mouse (add-on). A separate information screen is located centrally on the separate information screen for displaying the menus. These operating instructions are intended as a guide to help the user achieve the best possible results with the device. results with the appliance. The explanations have been kept as simple as possible so that even a less experienced user less experienced users the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Stages in a sequence of 1-2-3-5-10 Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, untipped specimen 25 nm - guaranteed with tungsten cathode at 1kV, 6 mm working distance, untipped specimen 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, untilted specimen Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Subject to changes and errors in technical data and specifications) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: used, Connect Four – The Building Blocks of Success from DLK – Storage Technology | Levelmaker® | Logistics | Solutions OUR OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your individual requirements. TRANSPORT & ASSEMBLY We are pleased to support you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The indicated price is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. Lhsdpfevdqhbjx Akqsf ABOUT US DLK, based in Nordhorn, deals in new and used products across the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and the skilled trades. We constantly offer attractive used equipment from a variety of manufacturers and brands on favourable terms. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 58,000 mm, first registration: 01/2016, mast type: telescopic, Year of construction: 2016, Drive: Wheeled Payload: 65,000 kg Gross vehicle weight (GVW): 42,388 kg Mast: Telescopic (4 sections) Mast length: 58 m Lifting capacity: 65,000 kg Superstructure make: GROVE RT765E-2 Technical condition: very good Visual condition: very good Lhodpfx Akjwud E Tsqsf

Condition: used, Year of construction: 2010, pillar-mounted slewing crane: mobil arm length ca. 2500 mm weight of the machine ca. 4 t weight max. in kg 125 kg Lhsdpfx Akjmt Rpwoqsf bucket net weight 430 kg bucket filling weight mindestens 416 kg bucket - total weight mindestens 846 kg max. wheel load 391 kg max. support load 544 kg .

Condition: used, Steel construction for crane system Width: approx. 8,3 m Length: approx. 5.1 m Plant dismantled The plant is sold "as is". Lhedpfsbruzbox Akqsf Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no redemption possible.

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Ljdpjkvmi Sjfx Akqehf Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, condition: ready for operation (used), General Data Lodpfox D Rx Ajx Akqjhf Measurements width 2840 mm Measurements depth 9997 mm Measurements height 2285 mm Machine weight 12600 kg Control Unit Brand AMADA Model AMNCF This 3-axis AMADA LCG-3015AJ 9kw + ASLUL TWIN TOWER was manufactured in 2017. It features a laser source AJ 9000, with cutting speeds up to 60 m/min and axis travel of 1550 x 3070 mm. Ideal for precise fiber laser cutting, it includes a 16-station nozzle changer and twin tower storage. Consider the opportunity to buy this AMADA LCG-3015AJ fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge Lhodpfxshyc Nwe Akqef j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: used, Year of construction: 1992, x-travel 1400 mm y-travel 1200 mm Lsdpfoftfczjx Akqehf z-travel 1000 mm Control ZM total power requirement 0,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 2 x 1,5 x 2 m