Second-hand machinery for sale (174)

Condition: good (used), Emulsion splitting system, oil-water separation system (for the removal of condensation water from compressors) The most cost-effective and permanently reliable solution to the problem is usually the oil/water Nsdpfx Afjgvu Tgozokt separation for dispersed condensates. The purified water complies with the legal regulations for sewer discharge

Condition: new, Year of construction: 2025, - Stepless speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage release - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity 20/23 mm - Thread cutting capacity max. M 12x1 - Spindle MK II - Drilling depth 100 mm - Throat 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Digital speed display - Digital drilling depth display - Quickly adjustable drilling depth stop - Manual feed - Motor three-phase current 400 V - Spindle speeds continuously 30 - 3,000 rpm Option: Coolant device: € 605 FACTORY WARRANTY: 3 years Nkjdpfjd Nk S Ijx Afzot DELIVERY: free of charge including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), Year of construction: 2008, X,Y travel: 14.6" x 10.6" U,V,Z travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Drive system: AC servo motor/linear motor Wire diameter: 0.004" – 0.012" Nedpfowqq Rhjx Afzekt Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb Taper angle: ±21°/4.33 in (DA+DB=0.6 in) Layout (W x D x H): 90.6" x 89.2" x 80.6"

Condition: good (used), Year of construction: 2002, functionality: fully functional, 2-axis machine. Largest turning diameter: 1000 mm Largest swing diameter: 1250 mm Vertical slide stroke: 1000 mm Stroke horizontal slide: 1250 mm Spindle head according to DIN 55026: Size A 15 Spindle Ø in front bearing: 240 mm Drive 100% / 40% ED: 4.4 / 5.5 kW Speed range 1: 6.3 90 224 rpm Nkodpfxjrx R S Uj Afzet Speed range 2: 25 360 900 rpm Feed rates: max. 14000 mm/min Rapid traverse: max. 20000 mm/min Turret head: 4 stations Round shank: Ø 60 mm according to DIN 69880 Connected load: 110 KW Weight: 25 tons The machine is still under power. Inspection possible at any time by arrangement. Price ex location. We will be happy to enquire about the costs for free truck.

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering Nkedpfx Afeiamn Sozet - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: good (used), Year of construction: 1987, Available immediately from location. CNC control: Heidenhain TNC 155 X travel: 600 mm Y travel: 200 mm Z travel: 150 mm Nedpfx Afewazwkszjkt Max. workpiece weight: 300 kg Table clamping area: 800 x 300 mm Table height: 800 mm Spindle speeds: continuously variable 40-2000 rpm Drive power: 4 kW Infinitely variable feed rates in all directions Dimensions (L x W x H): 2200 x 2700 x 2400 mm Approx. weight: 2000 kg

Condition: excellent (used), Year of construction: 1979, Overhauled: 1999 Shear force: 2000 kN Cycle speed: 59 rpm Performance: Round bar up to 63 mm in diameter, square bar up to 55 mm Machine weight: 7350 kg Dimensions: 2260 x 2920 x 1770 mm Bar feeder with separation: Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Nkjdpfev Ta Ucex Afzst Weight: 4000 kg Machine is still powered.

Condition: excellent (used), Year of construction: 2017, Motor from Lammers Antriebstechnik 11kW, 1470/min Valves: HYDAC Pump 30 cm³/rev Tank 250 liters Pressure 100 bar max Nedpfx Ajrm Nhlefzskt Oil HLP 46

Condition: excellent (used), 800 x 600 445 mm Nkedoqcvp Ejpfx Afzst 159 pieces

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz/ 60 Hz Filter area: 6.0 m² Nkodpfx Aevrg S Ssfzst Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Intake pipe: 180 mm Voltage: 230 V, 50 Hz Njdjvrfv Ajpfx Afzokt Filter area: 6.0 m² Conveying capacity: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.: 78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 slots with: -Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/collector cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Year of construction: 1986, condition: good (used), Automatic operation Feed with position control, min. Cut-off length 8 mm, Feed stroke max. 400 mm, for cut-off lengths over 400 mm, the stroke is repeated until the set dimension is reached. until the set dimension is reached. The cut-off length is displayed digitally. Nksdpfopxnkgex Afzet The desired number of cuts can be preselected. Sheet tear control, Chip scraper brush, chip conveyor, roller conveyor, support length 3 m, 5 new saw bands Cutting range round: 320 mm Rectangular cutting area: 320 x 320 mm Saw blade dimensions: 5250/5350 x 32 x 1.1 mm Band speed: 15 - 110 m/min Saw drive: 380 V, 4 kW Weight: 2200 kg Operating instructions, electrical and hydraulic circuit diagrams, Spare parts list

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Nkjdenh Nr Iepfx Afzot Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: used, Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round D 20 mm and rectangular 20x20mm Njdpfoc Uqkcox Afzokt Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base

Condition: good (used), Made in Germany - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° Nkodpfx Afoda A Eiezot - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW - weight: 2000 kg

Condition: used, The chip conveyor is a single conveyor, it is used to continuously and reliably convey short broken metal chips from the working area of the machine tool into a collecting container and at the same time to separate the metal chips from the cooling lubricant. This ensures more efficient production processes, improved dimensional accuracy of the workpieces and a longer shelf life of the coolant. The chip conveyor consists of a metal housing with a central chain strand and drivers. It is driven by a 230 V three-phase geared motor which can be connected to your machine tool by means of a plug. Oil return guide Nkodpfx Aoclu H Usfzot

Condition: new, Year of construction: 2025, Continuous/normal drilling capacity 18/20 mm Thread cutting capacity M12 (depending on pitch) Spindle MK II Drilling depth 100 mm Thread depth 240 mm Column diameter 82 mm Usable work surface W x L 340 x 280 mm T-slot size (arm), distance (mm), width dimension (mm) Number 2, 125, 13/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: quickly adjustable stop ring Manual drilling feed Table height adjustment with rack and pinion Motor three-phase - frequency-controlled, 230 V, 0.75 kW Spindle speeds continuously variable 30 - 3000 rpm Table work surface: 155 - 415 mm Foot work surface: 155 - 550 mm Machine dimensions: 355 x 705 x 1,825 Weight: 195 kg Accessories Optional Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Keyless drill chuck 3-16 mm (accuracy 0.17 mm), - Taper mandrel MK 2 B18 and reducing sleeve MK 2 to Mk 1 490.00 € D0Ezfi Factory guarantee: 3 years Free delivery including packaging (Germany only) Delivery time: immediately from stock NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE! Nkedpfevu Tmnsx Afzet

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5742, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots Njdpfx Ajq U Swgjfzjkt - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Low mileage, Refrigerant R134a GWP 1430, Filling quantity 1475 g, Cooling capacity 3 kW at 20 °C and 32 °C ambient temperature, Connection voltage 400 V - 50 Hz, Current consumption max 5 A, Condenser: air-cooled, Njdpfxsvvukks Afzokt Dimensions: 480 x 400 x 800 mm, Weight: 60 kg Accessories: Holding plate for fastening,

Condition: ready for operation (used), Year of construction: 1962, Eccentric press with black shield, Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Dimensions: W 800 x D 1200 x H 2200 mm Nksdpfxsu Rrrfj Afzot Weight 800 kg,

Condition: excellent (used), Year of construction: 2008, Mechanical filter Nkodpfxou Sqtks Afzet Air volume: 2000 m³/h appliance extraction capacity Color: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg

Condition: new, Year of construction: 2025, Three-phase 400V motor with frequency converter (kW) 3 Saw blade dimensions (mm) 5200 x 34 x 1.1 Flywheel diameter (mm) 480 Cutting speed (m/min) 20 – 120 Clamping width (mm) 610 Working height (mm) 780 Machine dimensions without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard features Ergonomically designed, robust welded frame construction for miter cuts from 0° to 60° right/left Sturdy, low-vibration frame construction with arm joint mounted on plain bearings Clearly arranged control panel on the operator side Njdpfx Asukgiqefzekt Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for maximum cutting performance Cutting Accuracy Requirements Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed: hydraulic including automatic cutting pressure regulation Miter adjustment and clamping (manual) Hydraulic full-stroke cylinder for vise (pull-down version) Floating vise Blade tension and saw blade breakage monitoring Easily removable chip collection trays Hydraulic blade tension indicator Integrated coolant supply (30 l tank capacity) LED work light Digital miter indicator Including saw blade with 3/4 combi-toothing Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Please inquire about additional accessories. DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: excellent (used), 800 x 600 470 mm Nkedpfx Asqcvh Nefzot 137 pieces

Condition: like new (used), Power 4.3 kW, 220 V 50/60 Hz, Weight 57 kg Nsdpfxewa Rhxe Afzekt Coolant R410A. 1000 g 5 units available The air coolers were installed on newly purchased EDM machines. Due to the existing central water cooling system, the air coolers were removed before commissioning.

Condition: good (used), Year of construction: 2008, - Control FANUC Series 18i-TB - max. bar Ø: 16 mm - max. speed - main spindle: 12 000 min-1 - max. speed - pick-up spindle: 12 000 min-1 Nsdpfxotmu Rge Afzekt - Headstock stroke: 130 mm - 3x rotating tools - Turning tools 4 + 4 - Bar feeder FMB minimag 18/3200 A