Lathe DOOSAN Lynx 220 LMS

CNC Lathe with C and Y-Axis

DOOSAN LYNX 220 LMA

Call

Condition: good (used), Year of construction: 2008, Catalog No. : 7054 Type: LYNX 220 LMA Producer: DOOSAN Made in: 2008 Characteristic: G8bi0mfa Control system: FANUC Series Oi-TC Total hours: 11781 h Maximum-turning length: 505 mm Turning diameter over bed (max): 250 mm Maximum turning diameter: 250 mm Maximum spindle speed: 6000 1/min Workpiece weight: 130 kg Max. bar diameter: 51 mm Axis X: 175 mm Axis Z: 550 mm Length: 2410 mm Width: 1600 mm Height: 1655 mm Weight: 4000 kg

Listing

Babberich

7,577 km

DOOSAN LYNX 220 LYC

Call

Condition: excellent (used), Year of construction: 2017, CNC Lathe with y-axis DOOSAN - LYNX 220 LYC MACH-ID 7757 Make: DOOSAN Type: LYNX 220 LYC Control: Siemens 840 Year: 2017 incl. LNS Bar feeder QLS 80 S2 incl. Large tooling package incl. tool eye incl. part catcher Specifications Metric US Standard Max. turning Ø B9e9tq08mg 600 mm X-Axis 205 mm Y-Axis 105 mm Z-Axis 560 mm Spindle bore 76 mm Speedrange 4500 Rpm Positions lower revolver 12 Speed live tools 6000 Rpm Power live tools 3,7 kW Pinole taper 4 Mk Stroke pinole 80 mm Quill Ø 65 mm Dimensions (Estimate) Length 2900 mm Width 1710 mm Height 1920 mm Weight 4150 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Listing

Heršpická 813/5, 639 00 Brno-střed-Štýřice, Czechia

8,352 km

DOOSAN LYNX 220 LSA

Call

Condition: good (used), Year of construction: 2012, Machine is in good condition, fully functional. Control system Fanuc-i. Machine has opposite spindle. Swing over bed 600 mm Swing over cross slide 400 mm max. working diameter 525 mm max. working length 51 mm X axe 205 mm Z axe 550 mm Slindle 6000 rpm Number of tools 12 Machine dimensions 2763 x 1627 x 1655 mm Machine weight 3300 kg 3rq399sqn8

Listing

Italy

8,629 km

Doosan LYNX 220LSY

Call

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand Fanuc Main Drive Spindle speed range 4500 Number of axis 4 This Doosan LYNX 220LSY Lathe was made in 2017. It is equipped with a Fanuc control unit and has 4 axis. The machine has a spindle speed of 4500 rpm. Application Types Kuxpeevj Turning

Listing

Thurmaston

7,109 km

cnc lathe

Doosan Lynx 2100

Call

Condition: excellent (used), Year of construction: 2017, Swing over bed 600mm, swing over carriage 400mm, bar capacity 65mm, machining diameter 350mm, machining length 550mm, 12 position turret, Bioiexwf38q Fanuc i control, Spindle 4500 rpm, swarf conveyor, tool setter, parts catcher, tailstock

Listing

Deventer

7,558 km

Doosan Lynx 2100 LMB

€69,500

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2018, Doosan Lynx 2100 LMB BK 2018 Driven tools B0bdons9 Tooling included Machine has few working hours and is in very good condition (as new)

Listing

Doosan P086TI - 220 kVA Generator - DPX-19852

Oudenbosch

7,502 km

Generator set

Doosan P086TI - 220 kVA Generator - DPX-19852

€23,500

Call

Condition: new, Year of construction: 2023, General information Field of application: Construction 3gwfa8r7 Drivetrain Type of fuel: Diesel Make of engine: Doosan P086TI Weights Empty weight: 2.100 kg Functional Generator capacity: 220 kVA Other information Fuel consumption: 31.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44M Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 285 l Transport dimensions (LxWxH): 3,55x1,13x1,8 Additional information Please contact Arjen van Dijk, Tijmen Pesselse or Kenny Bongers for more information

Buy-it-Now

Lathe

DOOSAN LYNX 220LSYA

€70,800

Condition: excellent (used), Year of construction: 2014, Operating hours: 750 h, Functionality: fully functional, The machine was used by a valve manufacturer. Auction due to closure of the production facility. TECHNICAL DETAILS Control: Doosan Fanuc i-series Turning length: 510 mm H7ztsm98f turning diameter: 300 mm Swivel diameter over bed: 600 mm Swivel diameter over slide: 400 mm X-axis: 205 mm Y-axis: 105 mm Z-axis: 560 mm C-axis: 0.001 mm Speed: max. 6000 rpm Tool turret: 12 positions (all positions driven) 24 positions Index Main spindle clearance: 61 mm Counter spindle clearance: 43 mm Tool holder: Direct holder EQUIPMENT Chip conveyor Touchsetter Parts catcher Counter spindle Conveyor belt for finished parts 2x 3-jaw chuck (main spindle chuck Samchully HS-206 Ø175 mm) (Samchully HS-05 counter spindle chuck Ø135 mm)

Listing

Tuřanka, 627 00 Brno-Slatina, Tschechien

8,356 km

Lathe CNC

DOOSAN LYNX 2100 B

Call

Condition: excellent (used), Year of construction: 2017, Lathe CNC LYNX 2100 B Producer: DOOSAN YP: 2017 Control Fanuc ... i Series Turning diameter... 350mm Turning length... 330mm inclined bed Spindle bore... 76mm Turret head Machine weight... 2750kg F9puzjl7d Axis X ... 300mm Axis Z ... 360mm Chuck diameter... 210mm Spindle speed ... 1-4500/min. L x W x H ... 2350x1595x1693mm The machine is in good condition and can be tested under power.

Listing

South Korea

10,754 km

Doosan Lynx 220A

Call

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 3500 kg Control Unit Brand Fanuc S08m0kk0 Model i SERIES This Doosan Lynx 220A Lathe was made in 2006 in South Korea. It is equipped with a Fanuc i Series control unit. Application Types Turning

Listing

1 Chapel Ln, Bristol BS5 7EY, UK

7,082 km

DOOSAN Lynx 220B

Call

turning diameter over cross slide: 320 mm, turning length: 533 mm, turning diameter: 510 mm, spindle bore: 65 mm, spindle speed (max.): 6,000 rpm, Condition: excellent (used), Year of construction: 2012, Choice of 2, both identical!! 2012 built Doosan Lynx 220B CNC lathe with Fanuc control, 8” 3 jaw chuck, collet chuck, barfeed, collet chuck, parts catcher, swarf conveyor, tailstock & tool setter. tailstock, tool setter & swarf conveyor. Specification: Main Spindle Turning Diameter Max: 320mm Main Spindle Turning Length Max: 533mm Main Spindle Chuck Diameter: 200mm Main Spindle Max Swing: 510mm Main Spindle Bar Diameter Max: 65 mm Tail Stock Quill And Body: Standard RPM: 6,000 rpm Max Tools 12 No of Axes and Travels 2 X Axis 175mm 30m/min Ovywleae Z Axis 552mm 30m/min

Listing

Gold Coast

13,614 km

DOOSAN LYNX 220LC

$26,090

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2007, Doosan LYNX 220 LC CNC Lathe 8l9ryi3dt3 PRICE REDUCTION -Reliable and high-performance CNC lathe, perfect for a variety of applications. This machine is in excellent condition and has been well-maintained. Features: Max turning diameter: 12.6" Max turning length: 20.7" Swing over bed: 20.1" Spindle speed: 4000 RPM 12-station automatic turret Fanuc CNC control Benefits: Accurate and precise machining Fast and efficient production Easy to operate and maintain Durable and reliable This lathe is on offer from the same company as the following high pressure water jetting equipment Price is in USD, and does not include taxes.

Listing

Heršpická 813/5, 639 00 Brno-střed-Štýřice, Czechia

8,352 km

DOOSAN LYNX 2100 A

Call

Condition: excellent (used), Year of construction: 2017, Control system Fanuc i-Series. Axes X/Z: 205/340mm Spindle revolutions 6000 rpm ASA A2-5 Max. swing over bed 600 mm Max. swing over cross slide 400 mm Max. working length 330 mm Max. bar diameter 42 mm Number of tools in head 12 pcs Chuck SMW-Autoblok, type KNCS-N 170-43-3-A05-GKB+WAK including 1 set of jaws Vwyvdmr

Auction

Lathe

DOOSAN LYNX 220LSYA

Condition: excellent (used), Year of construction: 2014, Operating hours: 750 h, Functionality: fully functional, The machine was used by a valve manufacturer. Auction due to closure of the production facility. Bjiu30rl TECHNICAL DETAILS Control: Doosan Fanuc i-series Turning length: 510 mm turning diameter: 300 mm Swivel diameter over bed: 600 mm Swivel diameter over slide: 400 mm X-axis: 205 mm Y-axis: 105 mm Z-axis: 560 mm C-axis: 0.001 mm Speed: max. 6000 rpm Tool turret: 12 positions (all positions driven) 24 positions Index Main spindle clearance: 61 mm Counter spindle clearance: 43 mm Tool holder: Direct holder EQUIPMENT Chip conveyor Touchsetter Parts catcher Counter spindle Conveyor belt for finished parts 2x 3-jaw chuck (main spindle chuck Samchully HS-206 Ø175 mm) (Samchully HS-05 counter spindle chuck Ø135 mm)

Listing

United Kingdom

6,838 km

CNC lathe Doosan Lynx 2100 LMA 3 axes

Doosan Lynx 300

Call

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 3035 mm Measurements depth 1785 mm Measurements height 1715 mm Machine weight 4000 kg Control Unit Brand Fanuc Model Series Oi Main Drive Number of spindles 1 Spindle speed range 3500 Bipsujd83ww Number of axis 2 Movement X-Axis Movement 255 mm Z-Axis Movement 790 mm Turret Number of turrets 1 Tools Slots in storage 12 This Doosan Lynx 300 Lathe was manufactured in the year 2011 in South Korea. It is equipped with a Fanuc Series Oi control unit and has 2 axis. The machine has a spindle speed of 3500 rpm. Application Types Turning

Listing

La Grand-Croix

7,871 km

DOOSAN

Call

Condition: excellent (used), Year of construction: 2020, 3 axes ( C axis, live tools) NC : SIEMENS S828D Ø swing over bed : 600 mm Bflyhn8lp2c Ø swing over saddle : 400 mm Max turning Ø : 300 mm Max turning length : 510 mm Bar working Ø : 51 mm X travel : 205 mm Z travel : 560 mm X rapid traverse : 30 Z rapid traverse : 36 Spindle speed : 6000 tr/min Spindle motor: 12.6/10.5 Spindle torque:100.8 Spindle nose : A2-5 C-axis min.indexing angle: 0.001 mm Turret 12 positions Max.rotary tool speed: 10 000 Tail stock travel : 580 mm Quill Ø : 65 mm Dimensions : 2540 x 1595 x 1693 mm Weight: 3 480 kg Available in December 2023

Listing

Venlo

7,611 km

Chassis part

Doosan DX220

€11,489

Gas engine / CHP / generator

Call

Condition: new, Year of construction: 2023, Please contact Sales Department for more information At Smitma we always have a wide range of undercarriages and components available, from premium brands such as Caterpillar, Hyundai, Hitachi, Volvo and more. All components are available directly from stock. Coqyjd0t

Listing

Hellevoetsluis

7,466 km

Doosan BGA220

Call

power: 350 kW (475.87 PS), Condition: excellent (used), Year of construction: 2008, Doosan gas engine comprising of 10 cylinder with a power of 350 kW. It has a mass of 3740kg and is complete with electric panel. Gkhwhw

Listing

Breitenfelde

7,723 km

Wheel loader

Doosan DL220-7

€131,500

Twin pallet vertical machining center

Call

Condition: new, Year of construction: 2022, machine/vehicle number: 14, Cabin ,Air condition ,Parking heater ,Additional headlights - hydraulic quick coupler - Three lever control, hydraulically pilot operated, with feedback function and FNR switch - 3. Hydraulic control circuit - load damping - LIS (Load Isolation System) - air conditioning system - radio - LED light - rear view camera - Electrically adjustable exterior mirrors - rotating beacon - radio remote control DOOSAN SMART KEY - BRIDGESTONE 20,5 R25 - 119 kW - approx. 12.000 Kg Cpxl0rphd ! Warranty for 36 months or 5.000 operating hours ! This offer is not binding, no guarantee for equipment details. Errors, changes and prior sale reserved! Ref.-No.: 14 - hydraulic quick coupler - three-lever controls, hydraulically piloted, with feedback function and FNR switch - 3rd hydraulic control circuit - hydraulic lift arm suspension (LIS - Load Isolation System) - air conditioning - radio - LED light - backup camera - electric adjustable rear mirrors - beacon - radio remote control DOOSAN SMART KEY - BRIDGESTONE 20.5 R25 - 119kW - about 12,000 kg ! Guarantee for 36 months or 5,000 operating hours! This offer is non-binding, no guarantee for equipment details. Errors and subject to prior sale! Ref. No.: 14

Listing

Dußlingen

(dealership location)

7,964 km

Diesel Forklift

Doosan D50SC-5

Call

fuel type: diesel, Condition: excellent (used), Year of construction: 2011, Operating hours: 8,448 h, Diesel Forklift Capacity: 5000kg Be28unath8j Lift height: 4200mm Overall weight: 2180kg Mast type: Triplex YOM: 2011 Front tyres type: SE Rear tyres type: SE Heating Work lights Free lift Soot filter Oil separator Magnet valve Load backrest Protective roof

Listing

Thurmaston

7,109 km

Doosan VC510

Call

Condition: good (used), Year of construction: 2012, Traverses X Y Z; 762 x 516 570mm, Table size 860 x 570mm, Table load 350 kgs, spindle power 18.5Kw, spindle speed 10,000 rpm, spindle taper BT40, 30 station ATC, Bir0jjnqyad Fanuc I control, through spindle coolant, swarf conveyor

Listing

Cuggiono

8,142 km

DOOSAN PUMA 2600LY

Call

turning length: 1,280 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, main spindle motor power: 22 W, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 30 mm/min, rapid traverse Y-axis: 10 mm/min, rapid traverse Z-axis: 30 mm/min, Condition: good (used), Year of construction: 2015, Operating hours: 8,219 h, Functionality: fully functional, 4-axis CNC lathe "DOOSAN PUMA model PUMA 2600LY" with driven tools, Y axis and CNC FANUC 0i-TD Dm9gcr

Auction

Amsterdam

(dealership location)

7,476 km

Forklift truck

Doosan B25-X

Auction ended

Details

Condition: used, Year of construction: 2012, Operating hours: 2,969 h, Type of fuel: Electric Biruc7q3rnr Empty weight: 4.800 kg Dimensions (LxBxH): 2400 x 1200 x 3550 cm Lifting capacity: 2.500 kg Lift height: 550 cm Fork length: 1.200 mm Current bid: EUR 1000 Tyre type: Full rubber

Listing

Italy

8,629 km

Doosan Mynx NM 410

Call

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 2745 kg Isp99ba Control Unit Brand FANUC Model Series 0i-MB Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 820 mm Y-Axis Movement 410 mm Z-Axis Movement 510 mm Table Outer length 1000 mm Outer width 450 mm This Doosan Mynx NM 410 Vertical Machining center was manufactured in the year 2006 in Korea. It is equipped with a FANUC Series 0i-MB control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. Application Types Milling

Listing

Venlo

7,611 km

Container

Doosan DX225 / DX235

€2,000

Diesel forklift truck (new) -

Call

Condition: used, Year of construction: 2017, Field of application: Construction Empty weight: 980 kg Transport dimensions (LxWxH): 0,00135x0,0016x0,0013 Please contact Sales Department for more information Biqk8eaym2w

Auction

Kalkar

7,600 km

Doosan D30NXS

€16,000

19 hours left

Details

fuel type: diesel, Condition: new, machine/vehicle number: FDA41-4360-03080, Make: Doosan Type: D30NXS Year of manufacture: 06.2023 Color: orange Dm8tlp Power: 42,6 kW (60 PS) Maschinen-Nr.: FDA41-4360-03080 Load capacity: 3000 kg Category: Forklift truck Information: - Forks with sideshift - Machine weight complete: 4831 kg

Listing

Hüfingen

7,968 km

excavator

DOOSAN DX140LCR-3

€55,500

Call

motor power: 81 W, Condition: excellent (used), Year of construction: 2013, Operating hours: 4,209 h, DOOSAN DX140LCR-3 year: 2013 operation hours: 4.209 hrs ROPS protection for cabine Mb0okpvee9 Airco Radio back drive camera monoboom stick: 2,40 meter all hydr. Lines (hammer-, gripper-, scissor-) quick coupler Lehnhoff HS10 central lubrication 1x bucket – 600m rubber U/C : 70% good trackshoes: 510 millimeter width engine with 81kW blade support CE/EPA operation weight: 15,3 to.

Listing

Cuggiono

8,142 km

DOOSAN PUMA GT3100LM

Call

turning length: 1,250 mm, turning diameter over cross slide: 720 mm, turning diameter: 376 mm, main spindle motor power: 22 W, spindle speed (min.): 20 rpm, spindle speed (max.): 2,800 rpm, spindle bore: 102 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 24 mm/min, rapid traverse Z-axis: 30 mm/min, Condition: excellent (used), Year of construction: 2016, Operating hours: 7,931 h, Functionality: fully functional, 3-axis CNC lathe "DOOSAN model PUMA GT3100LM" with driven tools and FANUC 0i-TF CNC Birv7tcl9rh

Listing

Hamburg

7,692 km

Heavy Forklifts

Doosan D160S-7 - TRIPLEX

Call

fuel type: diesel, Condition: used, Year of construction: 2017, Operating hours: 5,775 h, Heavy Forklifts Capacity: 16000kg Load Centre: 600 Lift height: 4400mm Free lift: 1500mm Overall Length: 4900mm Overall width: 2500mm Closed height: 3120mm Overall weight: 21142kg Mast type: Triplex Fork length: 2400mm YOM: 2017 Condition: Aufbereitet ohne Garantie Zustand Technisch: very good Bereifung vorne Typ: Super Elastic Bereifung vorne Grösse: 12.00-20 Bereifung hinten Typ: Super Elastic Bereifung hinten Grösse: 12.00-20 Description: Wir haben neben diesem Doosan Modell noch ca. 200 Schwerlaststapler, Kompaktstapler, Gabelstapler & Seitenstapler in unserem Lager Hamburg und Danzig. Besuchen Sie unsere Homepage - Mietkauf & Finanzierung zu günstigen Konditionen sind für uns jederzeit machbar. Gerne kaufen wir auch Ihren Gebrauchten frei an, auch ohne dass Sie ein Fahrzeug bei uns erwerben. Unser Inhaber Herr Peter Sawitzki berät Sie gerne ausführlich zu diesem D160S-7 P.S.: Unsere Stapler-Meisterwerkstatt ist auf Reparatur, Instandsetzung, Überholung und Sonderbau für Gabelstapler ab 8 to. spezialisiert. Gerne stellen wir auch Ihr Fahrzeug bei uns zum Kommissionsverkauf aus. Cyrr8obtz Heater, Full cabin, Full free lift,

Listing

Slovenia

8,476 km

Machining centers (horizontal)

Doosan MYNX 750

Call

Condition: ready for operation (used), Year of construction: 2009, Control Unit Brand FANUC Model 21i-mb Main Drive F3pxelrd7 Spindle speed range 12000 Spindle motor power 26 kW Number of axis 3 Movement X-Axis Movement 1525 mm Y-Axis Movement 762 mm Z-Axis Movement 625 mm Table Outer length 1600 mm Outer width 750 mm Tools Type of tool holder BT 40 This DOOSAN-MYNX 75 Vertical Machining center was manufactured in the year 2009 in Korea. It is equipped with a FANUC 21i-MB control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

Cuggiono

8,142 km

DOOSAN PUMA V400 R

Call

turning diameter over cross slide: 610 mm, turning length: 461 mm, turning diameter: 496 mm, motor power: 22 W, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 488 mm, rapid traverse X-axis: 20 mm/min, rapid traverse Z-axis: 24 mm/min, Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Equipment: Documentation/manual, 2-axis vertical CNC lathe "DOOSAN model PUMA V400" with FANUC i-Series CNC Biqmsc9zi7e

Listing

Italy

8,629 km

Doosan NHP 5000

Call

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 2680 mm Measurements depth 5450 mm Measurements height 2880 mm Machine weight 11500 kg Control Unit Brand FANUC Model 31I-MODEL B Main Drive Spindle speed range 15000 Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 730 mm Ix0qm9vnal Y-Axis Movement 730 mm Z-Axis Movement 880 mm Table Outer length 10900 mm Outer width 800 mm Tools Slots in storage 60 This DOOSAN NHP 5000 Horizontal Machining center was manufactured in the year 2021. It is equipped with a FANUC 31I-MODEL B control unit and has 4 axis. The machine has a spindle speed of 15000 rpm. Application Types Milling

Listing

Cuggiono

8,142 km

4-axis CNC lathe DOOSAN PUMA 3100XLY

DOOSAN PUMA 3100XLY

Call

turning diameter over cross slide: 850 mm, turning length: 2,125 mm, turning diameter: 420 mm, spindle bore: 102 mm, motor power: 30 W, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 293 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 2,190 mm, rapid traverse X-axis: 30 mm/min, rapid traverse Y-axis: 10 mm/min, rapid traverse Z-axis: 26 mm/min, Condition: good (used), Year of construction: 2018, Functionality: fully functional, Equipment: Documentation/manual, 4-axis CNC lathe "DOOSAN PUMA 3100XLY" with driven tools, Y axis, Morari SLZN 1517 steady rest and FANUC i-Series CNC Dm8ybp

Listing

United Kingdom

6,838 km

CNC lathe Doosan PUMA 600LY

Doosan DNM 6700

Call

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 4342 mm Measurements depth 2415 mm Measurements height 3100 mm Machine weight 8500 kg Control Unit Brand Doosan Fanuc Model i Series Main Drive Number of spindles 1 Spindle speed range 12000 Number of axis 3 Movement X-Axis Movement 1300 mm Y-Axis Movement 670 mm Z-Axis Movement 625 mm Bimy0ndxmcm Tools Slots in storage 30 Max weight 8 kg Max tool diameter 80/125 mm Max tool length 300 mm Type of tool holder BT 40 This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

Cuggiono

8,142 km

DOOSAN PUMA 600LY

Call

turning diameter over cross slide: 1,140 mm, turning length: 3,250 mm, turning diameter: 750 mm, spindle bore: 116 mm, motor power: 45 W, spindle speed (max.): 1,800 rpm, spindle speed (min.): 3 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 3,300 mm, rapid traverse X-axis: 12 mm/min, rapid traverse Y-axis: 6 mm/min, rapid traverse Z-axis: 10 mm/min, Condition: good (used), Year of construction: 2013, Functionality: fully functional, Equipment: Documentation/manual, Rotational speed infinitely variable, 4-axis CNC lathe "DOOSAN PUMA 600LY" with driven tools, Y-axis and FANUC i-Series CNC Cb9vkg0

Listing

Israel

10,872 km

3-axis vertical CNC lathe

Doosan DNM 6700 XL

Call

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 4800 mm Measurements depth 2970 mm Measurements height 3120 mm Machine weight 10000 kg Control Unit Brand FANUC Model Series 0i Plus Main Drive Spindle speed range 12000 Movement X-Axis Movement 2100 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 670 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 625 mm Z-Axis Rapid Traverse 30 m/min Tools Max weight 8 kg Max tool diameter 80-125 mm Max tool length 300 mm This Doosan DNM 6700 XL Vertical Machining Center was manufactured in the year 2023 in Korea. It is equipped with a FANUC Series 0i Plus control unit. The machine has a spindle speed of 12000 rpm. Application Types Milling Fuyvnaov3n

Listing

Cuggiono

8,142 km

DOOSAN PUMA V8300M-L

Call

turning diameter over cross slide: 920 mm, turning length: 690 mm, turning diameter: 830 mm, motor power: 37 W, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, rapid traverse X-axis: 20 mm/min, rapid traverse Z-axis: 20 mm/min, Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Equipment: Documentation/manual, 3-axis vertical CNC lathe "Doosan model PUMA V8300M" with driven tools and FANUC i-Series CNC Bipjnhx8btw

Listing

South Korea

10,754 km

DOOSAN 240

Call

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3940 kg Control Unit Brand Vision Model 380i Hrtlwyyxc7 This Doosan 240 Lathe was manufactured in the year 2008 in South Korea. It is equipped with a Vision 380i control unit. Application Types Turning

Listing

United Kingdom

6,838 km

DOOSAN 5100LB

Call

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand Fanuc Model Series OiT Main Drive Bxhs3djr Spindle speed range 1500 Number of axis 2 This DOOSAN 5100LB Lathe was made in 2018. It is equipped with a Fanuc Series OiT control unit and has 2 axis. The machine has a spindle speed of 1500 rpm. Application Types Turning

Listing

South Korea

10,754 km

Doosan DNM350/5AX

Call

Condition: ready for operation (used), Year of construction: 2017, Operating hours: 1,685 h, Control Unit Brand FANUC Model Series 31i-MODEL B5 Main Drive Spindle speed range 20000 8sk37dmtlk Movement X-Axis Movement 400 mm Y-Axis Movement 655 mm Z-Axis Movement 500 mm Media Main electronic connection 220V /50-60Hz This DOOSAN DNM350/5AX Vertical Machining center was manufactured in the year 2017 and has 1685 production hours, of which 1522 are cutting hours. It is equipped with a Fanuc Series 31i-MODEL B5 control unit. The machine has a spindle speed of 2000 rpm. There are 2 unites available. Application Types Milling

Listing

Portugal

7,326 km

Doosan NX 5500 II

Call

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2900 mm Measurements depth 2530 mm Measurements height 3064 mm Machine weight 9000 kg Control Unit Brand FANUC Model 31i Main Drive Spindle speed range 20000 Spindle motor power 11 kW Number of axis 3 Movement X-Axis Movement 900 mm Y-Axis Movement 550 mm Z-Axis Movement 500 mm Table Outer length 1000 mm Outer width 550 mm Table load 700 kg Tools Slots in storage 30 Max weight 7 kg Max tool diameter 80 mm Max tool length 220 mm This Doosan NX 5500 II Vertical Machining Center was manufactured in the year 2013. It is equipped with a FANUC 31i control unit and has 3 axis. The machines has a spindle speed of 20000 rpm. Application Types Milling Bd7nqi0ezko

Listing

Spain

7,597 km

DOOSAN MX2000S

Call

Condition: ready for operation (used), Year of construction: 2007, Operating hours: 15,000 h, General Data Measurements width 4500 mm Measurements depth 2300 mm Measurements height 2600 mm Control Unit Brand Fanuc Model Series 16i-TB Main Drive Spindle speed range 5000 Spindle motor power 22 kw Number of axis 9 Movement Y-Axis Movement +/- 80 mm This Doosan MX2000S lathe was made in the year 2007 and has 15000 hours. It is equipped with a Fanuc Series 16i-TB control unit and has 9 axis. The machine has a spindle speed of 5000 rpm. Application Types Turning Bgu2fkxlbcc

Listing

Italy

8,629 km

Machining centers (horizontal)

DOOSAN QL200HM

Call

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 7200 kg Control Unit I2klpkdkbj Brand Fanuc Model Series 18i-TB Main Drive Spindle speed range 40-4000 Spindle motor power 11/15 kW Tool taper ASA A2-6 Movement X-Axis Movement 180 mm C-Axis Movement ±360º This Doosan QL200HM Lathe was manufactured in the year 2008 in Korea. It is equipped with a Fanuc Series 18i-TB control unit. The machine has a spindle speed of 40-4000 rpm. Application Types Turning

Listing

Italy

8,629 km

Doosan HP5100

Call

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Main Drive Spindle speed range 1 - 30000 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min This Doosan HP5100 Horizontal Machine Center was built in the year 2008. It is equipped with a FANUC control unit. The machine has a spindle speed of 1 - 30000 rpm. Application Types Milling Rbyx7rp

Listing

Italy

8,629 km

DOOSAN Puma 3100LY

Call

Condition: ready for operation (used), Year of construction: 2019, Operating hours: 1,150 h, General Data Measurements width 2280 mm Measurements depth 5595 mm Bndooipde8 Measurements height 2315 mm Machine weight 10800 kg Control Unit Brand DOOSAN FANUC Model i SERIES Main Drive Spindle speed range 3000 Spindle motor power 22/18.5 KW Movement X-Axis Movement 293 mm Y-Axis Movement 2190 mm Z-Axis Movement 130 mm This Doosan Puma 3100LY Lathe was manufactured in the year 2019 in Korea and has approximately 1150 hours. It is equipped with a DOOSAN FANUC i SERIES control unit. The machine has a spindle speed of 3000 rpm. Application Types Turning

Listing

France

7,674 km

Doosan MYNX DNM 6500

Call

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 3200 mm Measurements depth 2750 mm Measurements height 2940 mm Machine weight 9000 kg Control Unit Brand Fanuc Model i Series Main Drive Spindle speed range 18000 Spindle motor power 15 kW Tool taper BT 40 Number of axis 4 Movement X-Axis Movement 1270 mm Y-Axis Movement 670 mm Z-Axis Movement 625 mm Table Outer length 1400 mm Outer width 670 mm Tiwosm0zz Table load 1000 kg This is DOOSAN MYNX DNM 6500 Vertical Machining center was manufactured in the year 2011. It is equipped with a Fanuc i Series control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. Application Types Milling

Listing

Hungary

8,662 km

DOOSAN DNM 5700

Call

Condition: ready for operation (used), Year of construction: 2019, Operating hours: 1,200 h, Control Unit Bwqe22tobw Brand FANUC Model 0iMF Main Drive Spindle speed range 12000 Spindle motor power 18,5 kW Number of axis 3+1 Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Table Table load 1000 kg This DOOSAN DNM 5700 Vertical Machining Center was manufactured in the year 2019 and has 1200 production hours. It is equipped with a FANUC 0iMF control unit and has 3+1 axis. The machine has a spindle speed of 12000 rpm. Application Types Milling

Listing

Italy

8,629 km

Machining centers (horizontal)

Doosan S550L

Call

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand Fanuc Bgyr7egta7c Model Series 21i/T Main Drive Spindle speed range 30-2500 Spindle motor power 22 Kw This DOOSAN S550L Lathe was manufactured in the year 2004. It is equipped with a Fanuc Series 21i/T control unit. The machine has a spindle speed of 25-3000 rpm. Application Types Turning

Listing

Italy

8,629 km

Doosan HP 6300

Call

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 12000 kg Control Unit Brand FANUC Model SERIES 18i-MB 8ussyhii7a Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 48 m/min Y-Axis Movement 850 mm Y-Axis Rapid Traverse 48 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 48 m/min This DOOSAN HP 6300 Horizontal Machining center was made in 2007 in Korea. It is equipped with a Fanuc Series 18i-MB control unit. Application Types Milling

Listing

France

7,674 km