Mixer

Eirich R15/ RV 15

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 130 kg, grinding length: 1,500 mm, grinding wheel diameter: 500 mm, total width: 2,155 mm, total length: 5,465 mm, total height: 1,700 mm, grinding diameter: 300 mm, grinding wheel width: 63 mm, The cylindrical grinding machine was fully overhauled in 2021 and has hardly been used since. The condition of the machine is practically like new. Kedpfx Aex A Dfyebgjdk Equipment as shown in the photos. The machine is connected to power and can be inspected at any time by prior arrangement. Technical specifications: Grinding diameter: 300 mm Grinding length: 1500 mm

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard Kodpfxev Rwu Uj Abgodk with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: ready for operation (used), 1) Electr. engine 5 kW 2) Vibrating dispenser, 3) Original STADLER construction (approximately 12 tons) Everything works and is ready to work - to check on site. Video on demand. Kdodpfxeiau S Do Abgsk Location; Poland

Condition: good (used), Year of construction: 1995, functionality: fully functional, operating hours: 32,518 h, pressing force: 250 t, control type: CNC control, Bending length [mm]: 3550 Press force [t]: 250 Kodpfoxcmwrox Abgjdk Control: Cybelec DNC 906 PS A Operating hours [h]: 32,518 - Hydraulic quick-clamping for punch and die - Hydraulic crowning system via CNC - 2-axis CNC backgauge (X and R) - 4 manually adjustable backgauge fingers - 2 movable bending supports - Comprehensive tooling package available as an option

Condition: used, functionality: unexamined, The belt dryer was not put into operation by me; it was purchased used. It is being sold as used, without warranty or liability. The right switch cabinet door is damaged (hinges torn out). Kdodpfoyf Uhlex Abgek

Condition: new, Year of construction: 2007, functionality: fully functional, machine/vehicle number: D5894, Grupa Azoty Zakłady Chemiczne "Police" S.A. in Police invites you to submit an offer for the sale of a fixed asset: Steam Turbine C-32154. Kodpex Eyviofx Abgsdk The Steam Turbine C-32154 was manufactured by DRESSER-RAND Wellsville, NY 14895 USA and was intended for driving a carbon dioxide compressor in the urea production process. It was delivered in September 2007. The turbine has never been used or installed in the plant. In December 2011, an inspection was carried out by Dresser-Rand service. In 2018, the turbine rotor underwent an overhaul at the Dresser-Rand Le Havre Repair Center workshop. The book value of the turbine at the time of purchase was PLN 8,783,457.93. We invite individual purchase offers.

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Kdodpfx Aboxbyx Togjk Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Kdsdpfxsyidvdo Abgjk Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: excellent (used), RNA 900 mm diameter vibration feeder, component feeder / ct1339a Kdjdeh Iy Ttjpfx Abgok In good condition, for sale with ESR3000 controller. Manufacturer: RNA Type: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 min - 1 Voltage: 220 V Power: 5.4 Diameter: 900 mm A = Output height: 167mm B = Trail width: 50mm D = Bowl diameter: 980mm H = bowl height: 250mm S = Track division: 81mm

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Kodpfx Aeyvz Afobgjdk Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW