Shrinking machine

Fischer SFV 80

Year of construction: 2020, condition: refurbished (used), LINCK CSM 120/6 5 STILLIG WARIABEL GENERALLY OVERHAULD AFTER OVERHAUL MACHINE STILL 2+132 KW 6 MOVING SAWS Ihodpevtc D Tefx Ahyet HIGH PERFORMANCE MACHINE NEW FAULT UNDER POWER OPPORTUNITY MORE INFO, PICTURES BY E-MAIL..

Condition: good (used), Year of construction: 2014, Coffee Cartridge Filling and Packaging Machine Complete and in good working condition Overhead hopper feed. Automatic online depositor Iodpfx Aheucf S Tsyeht Speed 300 packs / hour Complete with Simens Touch Screen Controller Hot melt carton gluer

Condition: good (used), Traypacker / wrap arround packer Trays and wrap-around boxes minimum packaging size L x W x H = 190 x 140 x 80 mm maximum packaging size L x W x H = 460 x 350 x 250 mm 4 lane machine Hotmelt machine was rebuild in 2018 siemens s7 plc controlled easy format change Ihodpsfxypijfx Ahyot as-is or adjusted to customer needs

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control Ihodpsidmptjfx Ahyjt - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Year of construction: 2023, condition: refurbished (used), SFV/800 Shrink Film Wrapping Machine Overhauled 2023 Workpiece length min. 1000 mm Maximum workpiece length 6300 mm width maximum 290 mm Iodpfx Asin Nnkshyeht Height maximum 180 mm Speed 15-60 m/min at maximum film thickness 40 μ Film width maximum 970 mm The position of the film from above Film thickness from 25 μ Heating elements - radiators Power 15-24 kW Weight 1900 kg Length of the shrink tunnel 3500 mm Electrical control - Siemens CPU S7-1500

Condition: excellent (used), Item: D-10720-PCI-UF-Pilot-Plant Ultrafiltration Pilot Plant APV Type PCI-UF 50-100 Ihodeihh Spspfx Ahyst inclusive pumps, Exchangers, Inventers, tubes and other accessories. Laboratory plant

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Ijdsd I Ncgopfx Ahyeht stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price Isdpfxev Si Sze Ahyjht To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 108111, working width: 240 mm, planing height: 160 mm, working height: 180 mm, Four-sided planer after service inspection, machine weight 3900 kg Ihsdovrq U Djpfx Ahyst

Year of construction: 2016, condition: ready for operation (used), Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation. Ihsdpfx Aheiph Uvjyst