Air Cooler, Evaporative Cooler 6129

Govers ET8

Year of construction: 2014, condition: refurbished (used), REEPAK REEFLOW 250 ID.NO. 2050 Gbslhjg Rcaboccqnew Reepak mod Reeflow 250 flowpack machine from 2014 which has previously packed apples but is suitable for all kinds of food etc. Dimensions max packaging L 600 x 250 mm H 100 mm. NOTE THE MACHINE IS IN NEW CONDITION! Dimensions 570 x 145 H 205 cm.

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Gjlhccqjwvwchonjbw Oil tank 190 L General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 36 mm Stroke volume 153 cm³ Injection pressure 173 MPa Screw speed 98 g/s Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Year of manufacture: 2013 Gbjlhccqsw U Tylsnsw The machine is equipped with an injection unit offering 7000 kN clamping force and a specific injection pressure of 1580 bar. It features a mixing screw with a diameter of 80 mm, allowing for a maximum stroke volume of 1860 cm³ and a maximum shot weight (for PS) of 1692.6 g. The screw rotation speed reaches up to 200 rpm, and the plasticizing capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. The clamping system enables mould installation with a mould height range from 400 to 940 mm and a clearance between tie bars of 940 × 960 mm. The opening stroke is 970 mm. Mould centring on the A.S. and D.S. sides is 200 / 200 mm. The ejector stroke stands at 260 mm (stroke) and 200 mm (passage). Equipment includes core drives: - on the moving platen – 2 units, - on the fixed platen – 2 units.

Condition: good (used), Year of construction: 2005, Water draining. Ready for use immediately for apples Gbelhohigmmsccqnow Brand Staas Belgium has a size for immersion tank and elevator length 5 meters wide, 2 meters the dryer is length 2.20 meters and width 1 meter everything in Nieroster

Condition: excellent (used), Year of construction: 2014, HAITIAN MARS MA9000II (2014) Clamping force: 900 t Screw diameter: 100 mm Shot volume: 3691 cm3 Shot weight: 3359 g Mold oppening stroke: 1120 mm Mold height min. / max. : 450 x 1080 mm Mold platen dimensions: 1580 x 1600 mm Distance between tie bars HxV (mm): 1080 x 1080 mm Gjlhccqjw N Rdwonebw Injection stroke: 470 mm Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Gbolhccorlk Dcsqnew

Condition: excellent (used), Year of construction: 2015, Clamping force: 650 t Screw diameter: 80 mm Gbslhcswzlz Nscqnew Shot weight: 2013 g Distance between tie bars V: 910 mm Distance between tie bars H: 1040 mm Mould opening stroke: 800/1350mm DIe height min-Max: 400-950mm Open daylight: 1750 mm Shot volume: 2212 cm3 Type: Horizontal Drive: Hydraulic 4 hydraulic cores 2 air valves New screw and barrel 1 year ago.

Condition: used, Year of construction: 2006, Used Goedhart LLK.p 108 m² evaporator on CO2. Complete with 2 MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 13.100 m³/h. Gslhcsrlk Drscqnebw

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Year of manufacture: 2013 Injection Unit Gslhccqew U Tu Nsnobw The machine is equipped with an 80 mm diameter mixing screw. Maximum shot volume is 1860 cm³, and the maximum shot weight for PS is 1692.6 g. The specific injection pressure reaches 1580 bar. The maximum screw rotation speed is 200 rpm, while the plasticising capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. Clamping Unit Clamping force is 7000 kN. The distance between tie bars is 940 × 960 mm. Mould installation height ranges from 400 to 940 mm. The opening stroke is 970 mm. Centring (A.S.–D.S.) is 200/200 mm. The ejector has a total stroke of 260 mm with an effective travel of 200 mm. Additional Equipment The machine is equipped with four core-pull circuits: two on the moving platen and two on the fixed platen.

Condition: excellent (used), Available central Bitzer refrigeration rack with 2 compressors, 40 HP each. Gbjlhcjw Ulxtocqnsw