Window production centre

Gubisch Centromat CW 1

Tenoning spindle 1 Stk.
Number of milling agregates 4 St.
Spindle diameter 50 mm



1 for window and door production
with 50 mm spindles in the longitudinal profiling.

With the following processing stations and options:

- One-sided slot machine for straight and sloping connections
- Milling machine with glazing bead cutting unit for longitudinal profiling
- Circumferential operation with synchronous milling unit and automatic
immersion.
- Swivel frame support up to 650 mm
- Fitting grooving unit
- Central control

1.0 crosscut saw automatically plunging in from above

- Engine power, including engine brake 3.0 kW
- Spindle speed 2800 rpm.
- Flight circle diameter 350 mm
- Spindle diameter 30 mm Æ
- Clamping flange, 1 driver 6 mm Æ
TC 42 mm 120 mm dia.
- Pneumatic vertical stroke 100 mm
- Pneumatic horizontal stroke 160 mm
against 2 manual 6-fold turret stops
- Chip extraction hood with extraction nozzle 100 mm Æ

2.0 slot unit

- Engine power, including engine brake 9.2 kW
- Spindle speed 3800 rpm.
- flight circle diameter 320 mm max.
- Spindle diameter 50 mm
- Effective spindle length 300 mm
- Pneumatic fixed vertical stroke 2 x 100 mm
- suitable for 3 sets of tools
- Zero height 10 mm
- Chip extraction hood with extraction socket Æ 160 mm

3.0 slot table

- Table height above floor 920 mm
- Feed automatic, with 2 speeds
- Slow 7m/min.
- Fast 14 m/min.
- Engine power including engine brake 0.21/0.30 kW
- Drive can be disengaged for manual feed
(oblique cuts)
- Pneumatic workpiece clamping
- Clamping cylinder 1 piece with 2 additional pressure shoes

3.1 Timber device
Cu8dossdkt
- Counter wood changer with 2-fold automatic change and with man. rotation of
180 degrees, 2
further subtractions possible, which are then also in automatic mode
counter.

3.2 Length stop
- Stop system with 3 scales for a) outer frame
b) Wings erect on the outside
c) Outer wing transversely
- Manual adjustment
- Length 2300mm
- pivotable +/- 60 degrees for inclined windows

3.3 Angle transfer
- Automatically via vertically clocked feed roller in the milling feed

4.0 milling machine
for longitudinal profiling and folding of windows/doors with the following
Aggregates:

4.1 Down milling unit with plunge automatic
- synchronization
- Automatic immersion can be used for folding
- Engine power including engine brake 7.5 kW
- Spindle speed 6000 rpm.
- flight circle diameter 240 mm max.
- Side stops adjustable for zero Æ 140 mm max.
of tools 112 mm min.
- Zero height 10 mm
- Spindle diameter 50 mm Æ
- Effective spindle length 100 mm
- Pneumatic horizontal stroke 80 mm
- Chip extraction hood with extraction socket Æ 120 mm

4.2 Profiling unit

- reverse
- Engine power including engine brake 9.2 kW
- Spindle speed 6000 rpm.
- flight circle diameter 240 mm max.
- Side stops adjustable for zero Æ 140 mm max.
of tools 112 mm min.
- Zero height 10 mm
- Spindle diameter 50 mm Æ
- Effective spindle length 300 mm
- Vertical stroke pneumatically fixed 1 x 100 mm
suitable for 3 sets of tools a 100 mm 2 x 100 mm
- Chip extraction hood with extraction socket Æ 140 mm

4.3 Grooving unit

- reverse
- Engine power including engine brake 3.0 kW
- Spindle speed 6,000 rpm.
- flight circle diameter
Profile depth 30 mm (hardware groove depth) 200 mm fixed
- Zero height 10 mm
- Spindle diameter 50 mm Æ
- Effective spindle length 100 mm
- Horizontal stroke 80 mm
- Chip extraction with extraction socket Æ 120 mm

4.4 Glazing bead saw unit
- reverse
- Engine power including engine brake 3